Show the difference between hydraulic gradient line & total energy line with the help of suitable diagram.

Show the difference between hydraulic gradient line & total energy line with the help of suitable diagram.
by

1 Answer

Answer :

Show the difference between hydraulic gradient line & total energy line with the help of suitable diagram.

image

by

Related questions

Draw indicator diagram for reciprocating pump showing the effect of accelerating head and frictional head.

Description : Draw indicator diagram for reciprocating pump showing the effect of accelerating head and frictional head.

Last Answer : Draw indicator diagram for reciprocating pump showing the effect of accelerating head and frictional head.

State the difference between Static head & Manometric head in centrifugal pump.

Description : State the difference between Static head & Manometric head in centrifugal pump.

Last Answer : Static head: The sum of suction head & delivery head is known as static head.  Manometric head: It is the total head that pump is required to develop. This include all losses. This is equal to difference between pressure head at inlet & outlet of pump.

Compare water and oil of specific gravity 0.8 on the basis of density & viscosity.

Description : Compare water and oil of specific gravity 0.8 on the basis of density & viscosity.

Last Answer : Here it is not possible to find out viscosity

Derive equation for discharge through orifice meter with the help of neat sketch.

Description : Derive equation for discharge through orifice meter with the help of neat sketch.

Last Answer : Orifice Meter or orifice Plate: It is a device used for measuring the rate of flow of a fluid through a pipe. It is Cheaper device as compared to venturimeter. It also works on the same ... a distance of about half the diameter of the orifice on the downstream side from the orifice plate. 

Explain Construction and working of Francis Turbine with neat sketch.

Description : Explain Construction and working of Francis Turbine with neat sketch.

Last Answer : The main parts of the Francis turbine are: 1) Penstock: It is the large pipe which conveys water from the upstream of the reservoir to the turbine runner. 2) Spiral casing: It is a closed passage ... After doing the work the water is discharge to the trail race through the draft tubes.

Discuss the factors considered for selection of pump

Description : Discuss the factors considered for selection of pump

Last Answer : 1) Pressure: Pump is ued to pressurize the fluid in system according to need of pressure we can select pump as below 2) Speed of pump: if the speed of pump is increased beyond its ... according to application we can choose it by economical aspect cost of pump & its spares should be less.

State any four faults in centrifugal pump and their remedies

Description : State any four faults in centrifugal pump and their remedies

Last Answer : Sr.No Fault remedies 1 Pump fails to start pumping Reprime the pump , Clean the impeller Reduce suction lift , Increase the speed 2 Pump stops working ... Reduce the speed Correct the direction of rotation of impeller Reduce the discharge , Repair affected parts

Draw and explain performance and operating characteristics curves of a Pelton turbine

Description : Draw and explain performance and operating characteristics curves of a Pelton turbine 

Last Answer : The followings are the important characteristic curves of a turbine : Main Characteristic Curves or Constant Head Curve. ... The speed of the turbine is varied by changing load on the turbine. For each value ... through the turbine as the load varies. Head may or may not kept constant.

Explain the Need of draft tube in reaction turbine .state the types of draft tube used in it

Description : Explain the Need of draft tube in reaction turbine .state the types of draft tube used in it

Last Answer : Draft tube is a pipe of gradually increasing diameter which connects the exit of runner of turbine to tail race. In case of reaction turbine , one part of available head is converted into K.E before ... . iv. Elbow draft tube with circular cross section at inlet and rectangular at outlet.

Draw the layout of hydroelectric power plant and classify the turbines used in it.

Description : Draw the layout of hydroelectric power plant and classify the turbines used in it.

Last Answer : Layout of hydroelectric power plant: Classification of the hydraulic turbines: According to the type of energy available at inlet to the turbine 1)impulse turbine and 2) Reaction turbine ... speed of the turbine 1)low specific speed 2)medium specific speed 3)High specific speed

List various minor losses in fluid flow. Explain any one type with sketch and formula.

Description : List various minor losses in fluid flow. Explain any one type with sketch and formula.

Last Answer : List various minor losses a) Sudden expansion of pipe b) Sudden contraction of pipe c) Pipe fittings d) Bend in pipe e) Loss of head at Entry. f) Loss of ... The head loss resulting from pipe expansion may be greatly reduced by introducing gradual pipe transition known as diffuser. 

Explain water hammer phenomenon and state the remedies measures to avoid it.

Description : Explain water hammer phenomenon and state the remedies measures to avoid it.

Last Answer : Water hammer phenomenon: commonly occurs when a valve closes suddenly at an end of a pipeline system, and a pressure wave propagates in the pipe. Water hammer (or hydraulic shock) is the momentary increase in ... . caused by the moving water. 7) Use high strength pipes. 8) Close the valve slowly.

Compare i) Steady and uniform flow ii) Laminar and turbulent flow

Description : Compare i) Steady and uniform flow ii) Laminar and turbulent flow

Last Answer : Steady flow:- The flow is said to be steady when the flow characteristics, such as velocity, pressure, density and temperature do not change with time. Water flowing through a tap at a constant rate is an ... called as turbulent flow. e.g. The flow of river at the time of flood is turbulent flow.

Explain Bernoulli’s theorem with neat sketch. State its two important assumptions.

Description : Explain Bernoulli’s theorem with neat sketch. State its two important assumptions.

Last Answer : This theorem states that whenever there is continuous flow of liquid the total energy at every section remains same provided that there is no any addition or loss of energy.  Let us consider ... incompressible. 4. Velocity is uniform over the cross section. 5. The flow is irrotational.

Draw sketch of Bourdon tube pressure gauge and state its advantages.

Description : Draw sketch of Bourdon tube pressure gauge and state its advantages.

Last Answer : Advantages:  • These give more accurate results. • Bourdon tube cost low. • Bourdon tube are simple in construction. • They can be modified to give electrical outputs. • They are safe even for high pressure measurement. • Accuracy is high especially at high pressures.

State the need of surge tank in hydroelectric power plant.

Description : State the need of surge tank in hydroelectric power plant.

Last Answer : It is the tank provided in the path of penstock to avoid pulsating discharge at inlet of turbines. To reduce effect of water hammer surge tanks are provided. During flow of ... reservoir to turbine through penstock pressure surges are created to compensate these surges surge tank is provided.

Write Chezy’s equation for frictional losses and list all the terms involved in it.

Description : Write Chezy’s equation for frictional losses and list all the terms involved in it.

Last Answer : Where; V = velocity of water in pipe,  m = hydraulic mean depth =A/P = d/4  I = loss of head per unit length,  C = Chezy’s constant

The pressure in the tyres of the four wheeler was measured as 33. State the unit of pressure in this case. Name the device use to measure this pressure.

Description : The pressure in the tyres of the four wheeler was measured as 33. State the unit of pressure in this case. Name the device use to measure this pressure.

Last Answer : The unit of pressure 33 in this case is PSI (Pound per square Inch).  The name of device used to measure is Bourdon Tube Pressure Gauge

Explain the mechanics of chip formation with neat diagram.

Description : Explain the mechanics of chip formation with neat diagram. 

Last Answer : Mechanics of chip formation: The basic mechanics of forming a chip are the same regardless of the base material. As the cutting tool engages the workpiece, the material directly ahead of ... action of slipping or shearing, which takes place within the crystals and between adjacent crystals.

What is something that is automated that shouldn't be? What is something that isn't that should be?

Description : What is something that is automated that shouldn't be? What is something that isn't that should be?

Last Answer : OMG…those DAMN automated answering devises that companies have. Push this…push that. Makes me boiling mad. Put a human being on the end of that phone!!! Make it that we can talk to a person & give people jobs.

How to Replace Automatic Transmission Fluid

Description : How to Replace Automatic Transmission Fluid

Last Answer : How to Replace Automatic Transmission Fluid Many cars run on automatic transmission because it is easy to use in city driving. Just because gear changes are automatic, however, maintenance should still be ... , you can easily replace ATF on your automatic transmission car and add years to its life.

How to Refill Brake Fluid

Description : How to Refill Brake Fluid

Last Answer : How to Refill Brake Fluid Driving with low brake fluid is not just bad for your car and damaging for its brakes, but it can be dangerous for you as well. Monitoring your brake fluid is relatively ... a secure place where children won't get it, as it is potentially harmful and dangerous to them.

How to Check Your Windshield Washer Fluid Level

Description : How to Check Your Windshield Washer Fluid Level

Last Answer : How to Check Your Windshield Washer Fluid Level Rain, sleet, or snow will not keep you from driving your car on a daily basis. Dust, pollution, and smoke will not keep you from driving ... mixed with the water to prevent the wiper blades from hardening and causing streaks on the windshield glass.

Best Motorcycle for a novice lady biker?

Description : Best Motorcycle for a novice lady biker?

Last Answer : Yamaha SX 650. It’s light,powerful and simple. Exactly how I like my men XD Have fun!

How can I get my silly little 1990 Ford Ranger to pass it's Gas Evap test?

Description : How can I get my silly little 1990 Ford Ranger to pass it's Gas Evap test?

Last Answer : I meant April. not August…

Is there anything I can do to fix my car myself?

Description : Is there anything I can do to fix my car myself?

Last Answer : What year, make, model? What’s normal mileage you’ve seen? What’re you seeing now? How many miles are on the odometer? When’s the last time you had some kind of scheduled maintenance done?

What is a crank shaft?

Description : What is a crank shaft?

Last Answer : http://en.wikipedia.org/wiki/Crank_shaft

What is a cam shaft?

Description : What is a cam shaft?

Last Answer : http://en.wikipedia.org/wiki/Cam_shaft

What is mechanics?

Description : What is mechanics?

Last Answer : http://en.wikipedia.org/wiki/Mechanics

How To Make Mechanics Hand Cleanser

Description : How To Make Mechanics Hand Cleanser

Last Answer : Grind up a bar or two of your soap 1 c. borax 1-2 t. pure turpentine 1 t. sweet orange essential oil 1 c. ground soap With very clean hands, work the turpentine and essential oil into the borax ... black on the outside. Don't forget to put a nail brush and pumice stone out with the hand cleanser.

The total energy line lies over the hydraulic gradient line by an amount equal to the (A) Pressure head (B) Velocity head (C) Pressure head + velocity head (D) Pressure head - velocity head

Description : The total energy line lies over the hydraulic gradient line by an amount equal to the (A) Pressure head (B) Velocity head (C) Pressure head + velocity head (D) Pressure head - velocity head

Last Answer : Answer: Option B

The arrangement made for passing the sewer line below an obstruction below the hydraulic gradient lines called A. Inverted syphon B. Depressed sewer C. Sag pipe D. all of these

Description : The arrangement made for passing the sewer line below an obstruction below the hydraulic gradient lines called A. Inverted syphon B. Depressed sewer C. Sag pipe D. all of these

Last Answer : ANS: D

Gravity conduits (A) Carry water under gravity (B) Follow the hydraulic gradient line (C) Are carried through tunnels in deep cuttings (D) All the above

Description : Gravity conduits  (A) Carry water under gravity  (B) Follow the hydraulic gradient line  (C) Are carried through tunnels in deep cuttings  (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following regarding the pressure conduits: (A) Pressure conduits are permitted to run ¾th full (B) Pressure conduits are always laid along down grades (C) The hydraulic gradient line always coincides the invert of the conduit (D) None of these

Description : Pick up the correct statement from the following regarding the pressure conduits:  (A) Pressure conduits are permitted to run ¾th full  (B) Pressure conduits are always laid along down grades  ... ) The hydraulic gradient line always coincides the invert of the conduit  (D) None of these

Last Answer : (D) None of these

Pickup the incorrect statement from the following: (A) The invert of pressure conduit is independent of the grade of the hydraulic gradient line (B) The pressure conduits may be taken uphill upto a maximum height of 8.3 m (C) Aqueducts and tunnels sections are generally kept circular (D) None of these

Description : Pickup the incorrect statement from the following:  (A) The invert of pressure conduit is independent of the grade of the hydraulic gradient line  (B) The pressure conduits may be taken uphill ... m  (C) Aqueducts and tunnels sections are generally kept circular  (D) None of these 

Last Answer : (D) None of these 

20. The hydraulic gradient line is always parallel to the centre line of the pipe. A) Correct B) Incorrect

Description : 20. The hydraulic gradient line is always parallel to the centre line of the pipe. A) Correct B) Incorrect

Last Answer : B

15. The hydraulic gradient line may be above or below the centre line of the pipe. A) True B) False

Description : 15. The hydraulic gradient line may be above or below the centre line of the pipe. A) True B) False

Last Answer : B

To avoid vaporisation in the pipe line, the pipe line over the ridge is laid such that it is not more than (A) 2.4 m above the hydraulic gradient (B) 6.4 m above the hydraulic gradient (C) 10.0 m above the hydraulic gradient (D) 5.0 above the hydraulic gradient

Description : To avoid vaporisation in the pipe line, the pipe line over the ridge is laid such that it is not more than (A) 2.4 m above the hydraulic gradient (B) 6.4 m above the hydraulic gradient (C) 10.0 m above the hydraulic gradient (D) 5.0 above the hydraulic gradient

Last Answer : Answer: Option B

The hydraulic gradient line lies over the centre line of the pipe by an amount equal to the (A) Pressure head(B) Velocity head (C) Pressure head + velocity head (D) Pressure head - velocity head

Description : The hydraulic gradient line lies over the centre line of the pipe by an amount equal to the (A) Pressure head (B) Velocity head (C) Pressure head + velocity head (D) Pressure head - velocity head

Last Answer : Answer: Option A

Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) The on-shore wind helps to produce wave action as well as rise of M.S.L. (C) A falling hydraulic gradient occurs in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Description : Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) ... in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Last Answer : (C) A falling hydraulic gradient occurs in the direction of the wave

Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the centre of the pipe. 4. Hydraulic gradient varies as the square of the mean velocity of flow. Which of these statements are correct? (a) 1, 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Description : Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the ... 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Last Answer : (b) 1 & 3 only

Which of the following law deals with hydraulic gradient in soil a. Fick lawb. Stoke lawc. Darcy lawd. Liebig law

Description : Which of the following law deals with hydraulic gradient in soil a. Fick law b. Stoke law c. Darcy law d. Liebig law

Last Answer : c. Darcy law

Pick up the correct statement from the following: (A) The phenomenon of quicksand generally occurs in the cohesionless soil (B) At critical hydraulic gradient, the saturated sand becomes quick (C) The critical gradient depends on the void ratio and the specific gravity (D) All the above

Description : Pick up the correct statement from the following: (A) The phenomenon of quicksand generally occurs in the cohesionless soil (B) At critical hydraulic gradient, the saturated sand becomes quick (C) The critical gradient depends on the void ratio and the specific gravity (D) All the above

Last Answer : (D) All the above

If the unit weight of sand particles is 2.696 g/cc. and porosity in loose state is 44%, the critical hydraulic gradient for quick sand condition, is (A) 0.91 (B) 0.92 (C) 0.93 (D) 0.95

Description : If the unit weight of sand particles is 2.696 g/cc. and porosity in loose state is 44%, the critical hydraulic gradient for quick sand condition, is (A) 0.91 (B) 0.92 (C) 0.93 (D) 0.95

Last Answer : (D) 0.95

A critical hydraulic gradient may occur when (A) Flow is in upward direction (B) Seepage pressure is in upward direction (C) Effective pressure is zero (D) All the above

Description : A critical hydraulic gradient may occur when (A) Flow is in upward direction (B) Seepage pressure is in upward direction (C) Effective pressure is zero (D) All the above

Last Answer : Answer: Option D

In a flow net (A) Flow lines and equipotential lines cross each other at right angles (B) Fields are rectangles whose length is twice the breadth (C) Smaller the dimensions of the field, smaller will be the hydraulic gradient and velocity of flow through it (D) For homogeneous soil, the curves are smooth and circular

Description : In a flow net (A) Flow lines and equipotential lines cross each other at right angles (B) Fields are rectangles whose length is twice the breadth (C) Smaller the dimensions of the field, ... gradient and velocity of flow through it (D) For homogeneous soil, the curves are smooth and circular

Last Answer : Option A

If the specific gravity and voids in soil sample are G and e respectively, the hydraulic gradient i, is (A) (G - 1)/(1 + e) (B) (G + 1)/(1 - e) (C) (1 - G)/(1 + e) (D) (1 + G)/(1 + e)

Description : If the specific gravity and voids in soil sample are G and e respectively, the hydraulic gradient i, is (A) (G - 1)/(1 + e) (B) (G + 1)/(1 - e) (C) (1 - G)/(1 + e) (D) (1 + G)/(1 + e)

Last Answer : Answer: Option A

If is specific gravity of sand particles, is porosity, the critically hydraulic gradient (A) ic = (G + 1)/(1 - e) (B) ic = (G + 1)/(1 + e) (C) ic = (G - 1)/(1 + e) (D) ic = (G - 1)/(1 - e)

Description : If is specific gravity of sand particles, is porosity, the critically hydraulic gradient (A) ic = (G + 1)/(1 - e) (B) ic = (G + 1)/(1 + e) (C) ic = (G - 1)/(1 + e) (D) ic = (G - 1)/(1 - e)

Last Answer : Answer: Option C

If the viscosity of ground water is 1.00, the Slitcher's constant is 400, the effective size of soil particles in aquifer is 0.5 mm and hydraulic gradient is 1 in 80, the velocity of flow is (A) 0.25 m/day (B) 0.50 m/day (C) 1.00 m/day (D) 1.25 m/day

Description : If the viscosity of ground water is 1.00, the Slitcher's constant is 400, the effective size of soil particles in aquifer is 0.5 mm and hydraulic gradient is 1 in 80, the velocity of flow is (A) 0.25 m/day (B) 0.50 m/day (C) 1.00 m/day (D) 1.25 m/day

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) The rate of flow of water through a vertical strip of the aquifer of unit width and full depth under a unit hydraulic gradient, is called coefficient of transmissibility (C) The flow of water through aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Description : Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) ... aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Last Answer : Answer: Option D