Write Chezy’s equation for frictional losses and list all the terms involved in it.

Write Chezy’s equation for frictional losses and list all the terms involved in it.
by

1 Answer

Answer :

image

Where; V = velocity of water in pipe,

 m = hydraulic mean depth =A/P = d/4

 I = loss of head per unit length,

 C = Chezy’s constant

by

Related questions

List various minor losses in fluid flow. Explain any one type with sketch and formula.

Description : List various minor losses in fluid flow. Explain any one type with sketch and formula.

Last Answer : List various minor losses a) Sudden expansion of pipe b) Sudden contraction of pipe c) Pipe fittings d) Bend in pipe e) Loss of head at Entry. f) Loss of ... The head loss resulting from pipe expansion may be greatly reduced by introducing gradual pipe transition known as diffuser. 

Draw indicator diagram for reciprocating pump showing the effect of accelerating head and frictional head.

Description : Draw indicator diagram for reciprocating pump showing the effect of accelerating head and frictional head.

Last Answer : Draw indicator diagram for reciprocating pump showing the effect of accelerating head and frictional head.

Derive equation for discharge through orifice meter with the help of neat sketch.

Description : Derive equation for discharge through orifice meter with the help of neat sketch.

Last Answer : Orifice Meter or orifice Plate: It is a device used for measuring the rate of flow of a fluid through a pipe. It is Cheaper device as compared to venturimeter. It also works on the same ... a distance of about half the diameter of the orifice on the downstream side from the orifice plate. 

Explain Construction and working of Francis Turbine with neat sketch.

Description : Explain Construction and working of Francis Turbine with neat sketch.

Last Answer : The main parts of the Francis turbine are: 1) Penstock: It is the large pipe which conveys water from the upstream of the reservoir to the turbine runner. 2) Spiral casing: It is a closed passage ... After doing the work the water is discharge to the trail race through the draft tubes.

Discuss the factors considered for selection of pump

Description : Discuss the factors considered for selection of pump

Last Answer : 1) Pressure: Pump is ued to pressurize the fluid in system according to need of pressure we can select pump as below 2) Speed of pump: if the speed of pump is increased beyond its ... according to application we can choose it by economical aspect cost of pump & its spares should be less.

State any four faults in centrifugal pump and their remedies

Description : State any four faults in centrifugal pump and their remedies

Last Answer : Sr.No Fault remedies 1 Pump fails to start pumping Reprime the pump , Clean the impeller Reduce suction lift , Increase the speed 2 Pump stops working ... Reduce the speed Correct the direction of rotation of impeller Reduce the discharge , Repair affected parts

Draw and explain performance and operating characteristics curves of a Pelton turbine

Description : Draw and explain performance and operating characteristics curves of a Pelton turbine 

Last Answer : The followings are the important characteristic curves of a turbine : Main Characteristic Curves or Constant Head Curve. ... The speed of the turbine is varied by changing load on the turbine. For each value ... through the turbine as the load varies. Head may or may not kept constant.

Explain the Need of draft tube in reaction turbine .state the types of draft tube used in it

Description : Explain the Need of draft tube in reaction turbine .state the types of draft tube used in it

Last Answer : Draft tube is a pipe of gradually increasing diameter which connects the exit of runner of turbine to tail race. In case of reaction turbine , one part of available head is converted into K.E before ... . iv. Elbow draft tube with circular cross section at inlet and rectangular at outlet.

Draw the layout of hydroelectric power plant and classify the turbines used in it.

Description : Draw the layout of hydroelectric power plant and classify the turbines used in it.

Last Answer : Layout of hydroelectric power plant: Classification of the hydraulic turbines: According to the type of energy available at inlet to the turbine 1)impulse turbine and 2) Reaction turbine ... speed of the turbine 1)low specific speed 2)medium specific speed 3)High specific speed

Explain water hammer phenomenon and state the remedies measures to avoid it.

Description : Explain water hammer phenomenon and state the remedies measures to avoid it.

Last Answer : Water hammer phenomenon: commonly occurs when a valve closes suddenly at an end of a pipeline system, and a pressure wave propagates in the pipe. Water hammer (or hydraulic shock) is the momentary increase in ... . caused by the moving water. 7) Use high strength pipes. 8) Close the valve slowly.

Compare i) Steady and uniform flow ii) Laminar and turbulent flow

Description : Compare i) Steady and uniform flow ii) Laminar and turbulent flow

Last Answer : Steady flow:- The flow is said to be steady when the flow characteristics, such as velocity, pressure, density and temperature do not change with time. Water flowing through a tap at a constant rate is an ... called as turbulent flow. e.g. The flow of river at the time of flood is turbulent flow.

Explain Bernoulli’s theorem with neat sketch. State its two important assumptions.

Description : Explain Bernoulli’s theorem with neat sketch. State its two important assumptions.

Last Answer : This theorem states that whenever there is continuous flow of liquid the total energy at every section remains same provided that there is no any addition or loss of energy.  Let us consider ... incompressible. 4. Velocity is uniform over the cross section. 5. The flow is irrotational.

Draw sketch of Bourdon tube pressure gauge and state its advantages.

Description : Draw sketch of Bourdon tube pressure gauge and state its advantages.

Last Answer : Advantages:  • These give more accurate results. • Bourdon tube cost low. • Bourdon tube are simple in construction. • They can be modified to give electrical outputs. • They are safe even for high pressure measurement. • Accuracy is high especially at high pressures.

State the difference between Static head & Manometric head in centrifugal pump.

Description : State the difference between Static head & Manometric head in centrifugal pump.

Last Answer : Static head: The sum of suction head & delivery head is known as static head.  Manometric head: It is the total head that pump is required to develop. This include all losses. This is equal to difference between pressure head at inlet & outlet of pump.

State the need of surge tank in hydroelectric power plant.

Description : State the need of surge tank in hydroelectric power plant.

Last Answer : It is the tank provided in the path of penstock to avoid pulsating discharge at inlet of turbines. To reduce effect of water hammer surge tanks are provided. During flow of ... reservoir to turbine through penstock pressure surges are created to compensate these surges surge tank is provided.

Show the difference between hydraulic gradient line & total energy line with the help of suitable diagram.

Description : Show the difference between hydraulic gradient line & total energy line with the help of suitable diagram.

Last Answer : Show the difference between hydraulic gradient line & total energy line with the help of suitable diagram.

The pressure in the tyres of the four wheeler was measured as 33. State the unit of pressure in this case. Name the device use to measure this pressure.

Description : The pressure in the tyres of the four wheeler was measured as 33. State the unit of pressure in this case. Name the device use to measure this pressure.

Last Answer : The unit of pressure 33 in this case is PSI (Pound per square Inch).  The name of device used to measure is Bourdon Tube Pressure Gauge

Compare water and oil of specific gravity 0.8 on the basis of density & viscosity.

Description : Compare water and oil of specific gravity 0.8 on the basis of density & viscosity.

Last Answer : Here it is not possible to find out viscosity

What is something that is automated that shouldn't be? What is something that isn't that should be?

Description : What is something that is automated that shouldn't be? What is something that isn't that should be?

Last Answer : OMG…those DAMN automated answering devises that companies have. Push this…push that. Makes me boiling mad. Put a human being on the end of that phone!!! Make it that we can talk to a person & give people jobs.

How to Replace Automatic Transmission Fluid

Description : How to Replace Automatic Transmission Fluid

Last Answer : How to Replace Automatic Transmission Fluid Many cars run on automatic transmission because it is easy to use in city driving. Just because gear changes are automatic, however, maintenance should still be ... , you can easily replace ATF on your automatic transmission car and add years to its life.

How to Refill Brake Fluid

Description : How to Refill Brake Fluid

Last Answer : How to Refill Brake Fluid Driving with low brake fluid is not just bad for your car and damaging for its brakes, but it can be dangerous for you as well. Monitoring your brake fluid is relatively ... a secure place where children won't get it, as it is potentially harmful and dangerous to them.

How to Check Your Windshield Washer Fluid Level

Description : How to Check Your Windshield Washer Fluid Level

Last Answer : How to Check Your Windshield Washer Fluid Level Rain, sleet, or snow will not keep you from driving your car on a daily basis. Dust, pollution, and smoke will not keep you from driving ... mixed with the water to prevent the wiper blades from hardening and causing streaks on the windshield glass.

Best Motorcycle for a novice lady biker?

Description : Best Motorcycle for a novice lady biker?

Last Answer : Yamaha SX 650. It’s light,powerful and simple. Exactly how I like my men XD Have fun!

How can I get my silly little 1990 Ford Ranger to pass it's Gas Evap test?

Description : How can I get my silly little 1990 Ford Ranger to pass it's Gas Evap test?

Last Answer : I meant April. not August…

Is there anything I can do to fix my car myself?

Description : Is there anything I can do to fix my car myself?

Last Answer : What year, make, model? What’s normal mileage you’ve seen? What’re you seeing now? How many miles are on the odometer? When’s the last time you had some kind of scheduled maintenance done?

What is a crank shaft?

Description : What is a crank shaft?

Last Answer : http://en.wikipedia.org/wiki/Crank_shaft

What is a cam shaft?

Description : What is a cam shaft?

Last Answer : http://en.wikipedia.org/wiki/Cam_shaft

What is mechanics?

Description : What is mechanics?

Last Answer : http://en.wikipedia.org/wiki/Mechanics

How To Make Mechanics Hand Cleanser

Description : How To Make Mechanics Hand Cleanser

Last Answer : Grind up a bar or two of your soap 1 c. borax 1-2 t. pure turpentine 1 t. sweet orange essential oil 1 c. ground soap With very clean hands, work the turpentine and essential oil into the borax ... black on the outside. Don't forget to put a nail brush and pumice stone out with the hand cleanser.

Explain the mechanics of chip formation with neat diagram.

Description : Explain the mechanics of chip formation with neat diagram. 

Last Answer : Mechanics of chip formation: The basic mechanics of forming a chip are the same regardless of the base material. As the cutting tool engages the workpiece, the material directly ahead of ... action of slipping or shearing, which takes place within the crystals and between adjacent crystals.

Petroff’s equation is used to find out (A) Load carrying capacity of the bearing (B) Frictional losses in the bearing (C) Unit bearing pressure on the bearing (D) Pressure distribution around the periphery of the journal

Description : Petroff’s equation is used to find out (A) Load carrying capacity of the bearing (B) Frictional losses in the bearing (C) Unit bearing pressure on the bearing (D) Pressure distribution around the periphery of the journal

Last Answer : (B) Frictional losses in the bearing

Good design of the casing of a centrifugal pump aims at minimising the (A) Cavitation (B) Frictional losses (C) Kinetic energy loss (D) Static head

Description : Good design of the casing of a centrifugal pump aims at minimising the (A) Cavitation (B) Frictional losses (C) Kinetic energy loss (D) Static head

Last Answer : Option C

The divergent portion of a Venturimeter is made longer than convergent portion in order to (A) Avoid the tendency of breaking away the stream of liquid (B) To minimise frictional losses (C) Both (A) and (B) (D) None of these

Description : The divergent portion of a Venturimeter is made longer than convergent portion in order to (A) Avoid the tendency of breaking away the stream of liquid (B) To minimise frictional losses (C) Both (A) and (B) (D) None of these

Last Answer : Answer: Option C

Total mechanical losses ( frictional losses , pumping loss in intake and exhaust and power accessories) will amount to a.10-20 % ihp b.2-10 % ihp c.20-30 % ihp d.30 -50 % ihp

Description : Total mechanical losses ( frictional losses , pumping loss in intake and exhaust and power accessories) will amount to a.10-20 % ihp b.2-10 % ihp c.20-30 % ihp d.30 -50 % ihp

Last Answer : a.10-20 % ihp

A machine's output is 4000 joules and its frictional losses are 1000 joules. Which of the following is its efficiency? Is it: w) 25% x) 30% y) 75% z) 80%

Description : A machine's output is 4000 joules and its frictional losses are 1000 joules. Which of the following is its efficiency? Is it: w) 25% x) 30% y) 75% z) 80%

Last Answer : ANSWER: Z -- 80%

A 10,000-watt motor operates an elevator weighing 5000 newtons. Assuming no frictional losses, how high is the elevator raised in 10 seconds. Is it raised: w) 2 meters x) 20 meters y) 50 meters z) 100 meters

Description : A 10,000-watt motor operates an elevator weighing 5000 newtons. Assuming no frictional losses, how high is the elevator raised in 10 seconds. Is it raised: w) 2 meters x) 20 meters y) 50 meters z) 100 meters

Last Answer : ANSWER: X -- 20 METERS

Derive an Ideal gas equation. Mention the terms involved in it. Also write how it is utilised to obtain combined gas law.

Description : Derive an Ideal gas equation. Mention the terms involved in it. Also write how it is utilised to obtain combined gas law.

Last Answer : Derive an Ideal gas equation. Mention the terms involved in it. Also write how it is utilised to obtain combined gas law.

Write continuity equation for nozzles. State involved with their units. meaning of all terms

Description : Write continuity equation for nozzles. State involved with their units. meaning of all terms 

Last Answer : Continuity equation for nozzle Mass flow rate = Density x Area x Velocity ( Density = 1/v) m = (AC/v ) = A1C1/v1) = (A2C2/v2) where, m = mass flow rate of steam in kg/s A= cross ... given section in m2 v = specific volume of steam at given section in m3/kg C= velocity of steam in m/s

In Chezy’s formula V = C rs for calculating the velocity of flow in circular sewer of diameter running full, the value of hydraulic mean radius is A. D B. D /2 C. D/3 D. D/4

Description : In Chezy’s formula V = C rs for calculating the velocity of flow in circular sewer of diameter running full, the value of hydraulic mean radius is A. D B. D /2 C. D/3 D. D/4

Last Answer : ANS: D

The formula V = (1/n) r2/3 A. Chezy’s formula B. Bazin’s formula C. Kutter’s formula D. Manning’s formula

Description : The formula V = (1/n) r2/3 A. Chezy’s formula B. Bazin’s formula C. Kutter’s formula D. Manning’s formula

Last Answer : ANS: D

The value of Chezy’s constant C = 157.6/(1.81 + K/ ) is used in A. Chezy’s formula B. Bazin’s formula C. Kutter’s formula D. Manning’s formula

Description : The value of Chezy’s constant C = 157.6/(1.81 + K/ ) is used in A. Chezy’s formula B. Bazin’s formula C. Kutter’s formula D. Manning’s formula

Last Answer : ANS: B

depends upon The Chezy’s constant C in the formula V = C A. Size of the sewer B. Shape of the sewer C. Roughness of sewer surface D. All the above

Description : depends upon The Chezy’s constant C in the formula V = C A. Size of the sewer B. Shape of the sewer C. Roughness of sewer surface D. All the above

Last Answer : ANS: D

According to Chezy's formula, the discharge through an open channel is (where A = Area of flow, C = Chezy's constant, m = Hydraulic mean depth, and i = Uniform slope in bed) (A) A × m × i) (B) C × m × i) (C) AC × m × i) (D) mi × A × C)

Description : According to Chezy's formula, the discharge through an open channel is (where A = Area of flow, C = Chezy's constant, m = Hydraulic mean depth, and i = Uniform slope in bed) (A) A × m × i) (B) C × m × i) (C) AC × m × i) (D) mi × A × C)

Last Answer : Answer: Option C

According to Chezy's formula, the discharge through an open channel is (where A = Area of flow, C = Chezy's constant, m = Hydraulic mean depth, and i = Uniform slope in bed) (A) A × m × i) (B) C × m × i) (C) AC × m × i) (D) mi × A × C)

Description : According to Chezy's formula, the discharge through an open channel is (where A = Area of flow, C = Chezy's constant, m = Hydraulic mean depth, and i = Uniform slope in bed) (A) A × m × i) (B) C × m × i) (C) AC × m × i) (D) mi × A × C)

Last Answer : Answer: Option C

If the distance to electric train is given by Fr = a + bv + cv2 In this equation constant c is likely to cover a.air resistance b.track resistance c.frictional resistance d.flange resistance e.107 dynes

Description : If the distance to electric train is given by Fr = a + bv + cv2 In this equation constant c is likely to cover a.air resistance b.track resistance c.frictional resistance d.flange resistance e.107 dynes

Last Answer : a. air resistance

Which of the following are not true for petroff’s equation? a) Shaft is considered concentric with the bearing b) Bearing is subjected to light load c) Is used to find coefficient of friction d) Frictional torque is given by fpr2l

Description : Which of the following are not true for petroff’s equation? a) Shaft is considered concentric with the bearing b) Bearing is subjected to light load c) Is used to find coefficient of friction d) Frictional torque is given by fpr2l

Last Answer : d) Frictional torque is given by fpr2l

Unemployment that is caused by a mismatch between the composition of the labor force (in terms of skills, occupation, industries, or geographic location) and the make-up of the demand for labor is called: A. Real wage unemployment B. Deficient-demand unemployment C. Frictional unemployment D. Structural Unemployment

Description : Unemployment that is caused by a mismatch between the composition of the labor force (in terms of skills, occupation, industries, or geographic location) and the make-up of the ... . Real wage unemployment B. Deficient-demand unemployment C. Frictional unemployment D. Structural Unemployment

Last Answer : D. Structural Unemployment

Unemployment that is caused by a mismatch between the composition of the labor force (in terms of skills, occupation, industries, or geographic location) and the make-up of the demand for labor is called (a) Real wage unemployment ; (b) Deficient-demand unemployment ; (c) Frictional unemployment ; (d) Structural Unemployment

Description : Unemployment that is caused by a mismatch between the composition of the labor force (in terms of skills, occupation, industries, or geographic location) and the make-up of the demand for ... unemployment ; (b) Deficient-demand unemployment ; (c) Frictional unemployment ; (d) Structural Unemployment

Last Answer : (d) Structural Unemployment

Match List-I (Type of Unemployment) with List-II (Characteristics) and select the correct answer using the codes given below: L ist-I L ist -I I (Type of (Char acter ist ics) Unem ployment ) A. Seasonal I. Occurs during boom or recession in the economy B. Frictional II. An absence of demand for a certain type of workers C. Disguised III. Occurs when moving from one job to another D. Structural IV. Actual contribution by the additional labour is nil E. Cyclical V. Job opportunities during certain months in the year

Description : Match List-I (Type of Unemployment) with List-II (Characteristics) and select the correct answer using the codes given below: L ist-I L ist -I I (Type of (Char acter ist ics) Unem ... contribution by the additional labour is nil E. Cyclical V. Job opportunities during certain months in the year

Last Answer : (1) A-V, B-III, C-IV, D-II, E-I

10.(a) An ore on treatment with dilute hydrochloric acid produces brisk effervesces. What type of ore is this? What steps will be required to obtain metal from the enriched ore. , (b) Copper coin is kept immersed in silver nitrate solution for some time. What change will take place in coin and colour of the solution ? Write balanced chemical equation of the reaction involved. -Chemistry

Description : 10.(a) An ore on treatment with dilute hydrochloric acid produces brisk effervesces. What type of ore is this? What steps will be required to obtain metal from the enriched ore. , (b) ... in coin and colour of the solution ? Write balanced chemical equation of the reaction involved. -Chemistry

Last Answer : (a) Carbonate ore: (i) Calcination: Carbonate ore is heated in limited supply of air and oxide is obtained, e.g. (b) Copper, being more reactive than silver will displace silver from silver nitrate ... and there will be deposition of silver on copper coin. The colour of solution will turn to blue.