Draw indicator diagram for reciprocating pump showing the effect of accelerating head and frictional head.

Draw indicator diagram for reciprocating pump showing the effect of accelerating head and frictional head.
by

1 Answer

Answer :

Draw indicator diagram for reciprocating pump showing the effect of accelerating head and frictional head.

image

by

Related questions

State the difference between Static head & Manometric head in centrifugal pump.

Description : State the difference between Static head & Manometric head in centrifugal pump.

Last Answer : Static head: The sum of suction head & delivery head is known as static head.  Manometric head: It is the total head that pump is required to develop. This include all losses. This is equal to difference between pressure head at inlet & outlet of pump.

Write Chezy’s equation for frictional losses and list all the terms involved in it.

Description : Write Chezy’s equation for frictional losses and list all the terms involved in it.

Last Answer : Where; V = velocity of water in pipe,  m = hydraulic mean depth =A/P = d/4  I = loss of head per unit length,  C = Chezy’s constant

Discuss the factors considered for selection of pump

Description : Discuss the factors considered for selection of pump

Last Answer : 1) Pressure: Pump is ued to pressurize the fluid in system according to need of pressure we can select pump as below 2) Speed of pump: if the speed of pump is increased beyond its ... according to application we can choose it by economical aspect cost of pump & its spares should be less.

State any four faults in centrifugal pump and their remedies

Description : State any four faults in centrifugal pump and their remedies

Last Answer : Sr.No Fault remedies 1 Pump fails to start pumping Reprime the pump , Clean the impeller Reduce suction lift , Increase the speed 2 Pump stops working ... Reduce the speed Correct the direction of rotation of impeller Reduce the discharge , Repair affected parts

Draw and explain performance and operating characteristics curves of a Pelton turbine

Description : Draw and explain performance and operating characteristics curves of a Pelton turbine 

Last Answer : The followings are the important characteristic curves of a turbine : Main Characteristic Curves or Constant Head Curve. ... The speed of the turbine is varied by changing load on the turbine. For each value ... through the turbine as the load varies. Head may or may not kept constant.

Draw the layout of hydroelectric power plant and classify the turbines used in it.

Description : Draw the layout of hydroelectric power plant and classify the turbines used in it.

Last Answer : Layout of hydroelectric power plant: Classification of the hydraulic turbines: According to the type of energy available at inlet to the turbine 1)impulse turbine and 2) Reaction turbine ... speed of the turbine 1)low specific speed 2)medium specific speed 3)High specific speed

Draw sketch of Bourdon tube pressure gauge and state its advantages.

Description : Draw sketch of Bourdon tube pressure gauge and state its advantages.

Last Answer : Advantages:  • These give more accurate results. • Bourdon tube cost low. • Bourdon tube are simple in construction. • They can be modified to give electrical outputs. • They are safe even for high pressure measurement. • Accuracy is high especially at high pressures.

Show the difference between hydraulic gradient line & total energy line with the help of suitable diagram.

Description : Show the difference between hydraulic gradient line & total energy line with the help of suitable diagram.

Last Answer : Show the difference between hydraulic gradient line & total energy line with the help of suitable diagram.

Explain Construction and working of Francis Turbine with neat sketch.

Description : Explain Construction and working of Francis Turbine with neat sketch.

Last Answer : The main parts of the Francis turbine are: 1) Penstock: It is the large pipe which conveys water from the upstream of the reservoir to the turbine runner. 2) Spiral casing: It is a closed passage ... After doing the work the water is discharge to the trail race through the draft tubes.

Derive equation for discharge through orifice meter with the help of neat sketch.

Description : Derive equation for discharge through orifice meter with the help of neat sketch.

Last Answer : Orifice Meter or orifice Plate: It is a device used for measuring the rate of flow of a fluid through a pipe. It is Cheaper device as compared to venturimeter. It also works on the same ... a distance of about half the diameter of the orifice on the downstream side from the orifice plate. 

Explain the Need of draft tube in reaction turbine .state the types of draft tube used in it

Description : Explain the Need of draft tube in reaction turbine .state the types of draft tube used in it

Last Answer : Draft tube is a pipe of gradually increasing diameter which connects the exit of runner of turbine to tail race. In case of reaction turbine , one part of available head is converted into K.E before ... . iv. Elbow draft tube with circular cross section at inlet and rectangular at outlet.

List various minor losses in fluid flow. Explain any one type with sketch and formula.

Description : List various minor losses in fluid flow. Explain any one type with sketch and formula.

Last Answer : List various minor losses a) Sudden expansion of pipe b) Sudden contraction of pipe c) Pipe fittings d) Bend in pipe e) Loss of head at Entry. f) Loss of ... The head loss resulting from pipe expansion may be greatly reduced by introducing gradual pipe transition known as diffuser. 

Explain water hammer phenomenon and state the remedies measures to avoid it.

Description : Explain water hammer phenomenon and state the remedies measures to avoid it.

Last Answer : Water hammer phenomenon: commonly occurs when a valve closes suddenly at an end of a pipeline system, and a pressure wave propagates in the pipe. Water hammer (or hydraulic shock) is the momentary increase in ... . caused by the moving water. 7) Use high strength pipes. 8) Close the valve slowly.

Compare i) Steady and uniform flow ii) Laminar and turbulent flow

Description : Compare i) Steady and uniform flow ii) Laminar and turbulent flow

Last Answer : Steady flow:- The flow is said to be steady when the flow characteristics, such as velocity, pressure, density and temperature do not change with time. Water flowing through a tap at a constant rate is an ... called as turbulent flow. e.g. The flow of river at the time of flood is turbulent flow.

Explain Bernoulli’s theorem with neat sketch. State its two important assumptions.

Description : Explain Bernoulli’s theorem with neat sketch. State its two important assumptions.

Last Answer : This theorem states that whenever there is continuous flow of liquid the total energy at every section remains same provided that there is no any addition or loss of energy.  Let us consider ... incompressible. 4. Velocity is uniform over the cross section. 5. The flow is irrotational.

State the need of surge tank in hydroelectric power plant.

Description : State the need of surge tank in hydroelectric power plant.

Last Answer : It is the tank provided in the path of penstock to avoid pulsating discharge at inlet of turbines. To reduce effect of water hammer surge tanks are provided. During flow of ... reservoir to turbine through penstock pressure surges are created to compensate these surges surge tank is provided.

The pressure in the tyres of the four wheeler was measured as 33. State the unit of pressure in this case. Name the device use to measure this pressure.

Description : The pressure in the tyres of the four wheeler was measured as 33. State the unit of pressure in this case. Name the device use to measure this pressure.

Last Answer : The unit of pressure 33 in this case is PSI (Pound per square Inch).  The name of device used to measure is Bourdon Tube Pressure Gauge

Compare water and oil of specific gravity 0.8 on the basis of density & viscosity.

Description : Compare water and oil of specific gravity 0.8 on the basis of density & viscosity.

Last Answer : Here it is not possible to find out viscosity

Explain the mechanics of chip formation with neat diagram.

Description : Explain the mechanics of chip formation with neat diagram. 

Last Answer : Mechanics of chip formation: The basic mechanics of forming a chip are the same regardless of the base material. As the cutting tool engages the workpiece, the material directly ahead of ... action of slipping or shearing, which takes place within the crystals and between adjacent crystals.

For a reciprocating pump, the indicator diagram is the graph between the (A) Discharge and overall efficiency (B) Volume swept by piston for one complete revolution and the pressure in the cylinder (C) Angle swept by the crank pin at any instant and the discharge (D) None of these

Description : For a reciprocating pump, the indicator diagram is the graph between the (A) Discharge and overall efficiency (B) Volume swept by piston for one complete revolution and the pressure in the cylinder (C) Angle swept by the crank pin at any instant and the discharge (D) None of these

Last Answer : (B) Volume swept by piston for one complete revolution and the pressure in the cylinder

What is something that is automated that shouldn't be? What is something that isn't that should be?

Description : What is something that is automated that shouldn't be? What is something that isn't that should be?

Last Answer : OMG…those DAMN automated answering devises that companies have. Push this…push that. Makes me boiling mad. Put a human being on the end of that phone!!! Make it that we can talk to a person & give people jobs.

Consider the following statements: Air vessels are fitted on the suction and delivery sides of a reciprocating pump to 1. Achieve higher speed without separation. 2. Reduce work in overcoming frictional resistance. 3. Avoid excessive vibration permanently. 4. Have nearly uniform discharge. Which of these statements are corrects? (a) 1, 2 & 4 only (b) 1, 2 & 3 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Description : Consider the following statements: Air vessels are fitted on the suction and delivery sides of a reciprocating pump to 1. Achieve higher speed without separation. 2. Reduce work in overcoming frictional resistance. 3. Avoid excessive vibration ... 2 & 3 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Last Answer : (d) 1, 2, 3 & 4

How to Replace Automatic Transmission Fluid

Description : How to Replace Automatic Transmission Fluid

Last Answer : How to Replace Automatic Transmission Fluid Many cars run on automatic transmission because it is easy to use in city driving. Just because gear changes are automatic, however, maintenance should still be ... , you can easily replace ATF on your automatic transmission car and add years to its life.

How to Refill Brake Fluid

Description : How to Refill Brake Fluid

Last Answer : How to Refill Brake Fluid Driving with low brake fluid is not just bad for your car and damaging for its brakes, but it can be dangerous for you as well. Monitoring your brake fluid is relatively ... a secure place where children won't get it, as it is potentially harmful and dangerous to them.

How to Check Your Windshield Washer Fluid Level

Description : How to Check Your Windshield Washer Fluid Level

Last Answer : How to Check Your Windshield Washer Fluid Level Rain, sleet, or snow will not keep you from driving your car on a daily basis. Dust, pollution, and smoke will not keep you from driving ... mixed with the water to prevent the wiper blades from hardening and causing streaks on the windshield glass.

Best Motorcycle for a novice lady biker?

Description : Best Motorcycle for a novice lady biker?

Last Answer : Yamaha SX 650. It’s light,powerful and simple. Exactly how I like my men XD Have fun!

How can I get my silly little 1990 Ford Ranger to pass it's Gas Evap test?

Description : How can I get my silly little 1990 Ford Ranger to pass it's Gas Evap test?

Last Answer : I meant April. not August…

Is there anything I can do to fix my car myself?

Description : Is there anything I can do to fix my car myself?

Last Answer : What year, make, model? What’s normal mileage you’ve seen? What’re you seeing now? How many miles are on the odometer? When’s the last time you had some kind of scheduled maintenance done?

What is a crank shaft?

Description : What is a crank shaft?

Last Answer : http://en.wikipedia.org/wiki/Crank_shaft

What is a cam shaft?

Description : What is a cam shaft?

Last Answer : http://en.wikipedia.org/wiki/Cam_shaft

What is mechanics?

Description : What is mechanics?

Last Answer : http://en.wikipedia.org/wiki/Mechanics

How To Make Mechanics Hand Cleanser

Description : How To Make Mechanics Hand Cleanser

Last Answer : Grind up a bar or two of your soap 1 c. borax 1-2 t. pure turpentine 1 t. sweet orange essential oil 1 c. ground soap With very clean hands, work the turpentine and essential oil into the borax ... black on the outside. Don't forget to put a nail brush and pumice stone out with the hand cleanser.

Good design of the casing of a centrifugal pump aims at minimising the (A) Cavitation (B) Frictional losses (C) Kinetic energy loss (D) Static head

Description : Good design of the casing of a centrifugal pump aims at minimising the (A) Cavitation (B) Frictional losses (C) Kinetic energy loss (D) Static head

Last Answer : Option C

Air vessel provided in a reciprocating pump is for (A) Increasing the acceleration head (B) Making the friction in pipe uniform (C) Decreasing the acceleration head (D) None of these

Description : Air vessel provided in a reciprocating pump is for (A) Increasing the acceleration head (B) Making the friction in pipe uniform (C) Decreasing the acceleration head (D) None of these

Last Answer : (B) Making the friction in pipe uniform

A double acting reciprocating pump compared to a single acting pump (of almost same size working under same pressure levels) would give almost double (A) Head (B) Discharge (C) Efficiency (D) None of these

Description : A double acting reciprocating pump compared to a single acting pump (of almost same size working under same pressure levels) would give almost double (A) Head (B) Discharge (C) Efficiency (D) None of these

Last Answer : (B) Discharge

Acceleration head in a reciprocating pump (A) Increases the work done during delivery stroke (B) Decreases the work done during suction stroke (C) Does not change the work requirement of the pump (D) Increases the work done during suction stroke

Description : Acceleration head in a reciprocating pump (A) Increases the work done during delivery stroke (B) Decreases the work done during suction stroke (C) Does not change the work requirement of the pump (D) Increases the work done during suction stroke

Last Answer : (C) Does not change the work requirement of the pump

The __________ of a double acting reciprocating pump as compared to the single acting pump will be almost double. (A) Flow output (B) Head developed (C) Overall efficiency (D) Weight

Description : The __________ of a double acting reciprocating pump as compared to the single acting pump will be almost double. (A) Flow output (B) Head developed (C) Overall efficiency (D) Weight

Last Answer : Option A

Reduced voltage applied to a motor during the starting period will _____________. A. result in decreased acceleration time only B. lower the starting current and increase accelerating time C. cause a greater starting torque D. increase the starting current and pump capacity

Description : Reduced voltage applied to a motor during the starting period will _____________. A. result in decreased acceleration time only B. lower the starting current and increase accelerating time C. cause a greater starting torque D. increase the starting current and pump capacity

Last Answer : Answer: B

Draw a diagram showing the different Soil Horizons. -SST 10th

Description : Draw a diagram showing the different Soil Horizons. -SST 10th

Last Answer : Given diagram showing the different Soil Horizons

Draw a neat labelled diagram showing steam distillation at laboratory scale

Description : Draw a neat labelled diagram showing steam distillation at laboratory scale

Last Answer : labelled diagram showing steam distillation at laboratory scale

Draw P-ⱷ diagram showing stages of combustion in SI engine.

Description : Draw P-ⱷ diagram showing stages of combustion in SI engine.

Last Answer : Stages of combustion in SI engines  Stage I: Ignition Lag or Preparation Phase: The time elapsed between the fuel injection into the combustion chamber and starting of combustion. It is the growth ... reduces due to surface of the flame front becoming smaller and reduction in turbulence.   

Draw basic ‘cam-follower’ diagram showing its terminology (Minimum four terms)

Description : Draw basic ‘cam-follower’ diagram showing its terminology (Minimum four terms)

Last Answer : Basic Cam Follower Profile:

State functions and materials for front axle. Draw proportionate diagram of front axle showing cross-section at different positions.

Description : State functions and materials for front axle. Draw proportionate diagram of front axle showing cross-section at different positions. 

Last Answer : The functions of front axle :  1) It supports the weight of front part of the vehicle. 2) It facilitates steering. 3) It absorbs shocks which are transmitted due to road surface irregularities. 4) It ... is usually a steel drop forging having 0.4 % carbon steel or 1-3 % nickel steel. 

Draw block diagram of pneumatic system showing its basic components. State the functions of control value and air actuator.

Description : Draw block diagram of pneumatic system showing its basic components. State the functions of control value and air actuator.

Last Answer : Diagram : Control valve: - control and regulates the direction of flow and pressure etc. Air actuator: - Air cylinders and motors are used to obtain the required movements of direction flow.

Draw schematic diagram of welding transformer showing constructional features of a welding transformer. Also explain its working.

Description : Draw schematic diagram of welding transformer showing constructional features of a welding transformer. Also explain its working.

Last Answer : Constructional features of welding transformer: Working of welding transformer: i) It is a step down transformer that reduces the voltage from the source voltage to a voltage desired according to the demands of ... 230 V, 415 V Secondary voltage - 40 to 60 V Secondary current - 200 to 600 A

Draw neat labeled diagram of single phase AC locomotive showing its various equipments of power circuit and give function of each equipment used in power circuit.

Description : Draw neat labeled diagram of single phase AC locomotive showing its various equipments of power circuit and give function of each equipment used in power circuit.

Last Answer : Functions of equipment: 1) circuit breaker: disconnects the locomotive equipment from the supply in the event of fault in the equipment / loco. 2) On load tap changer, used to control the ... 6) Traction motor: operates as per the required operating characteristics to take on the traction load.

Actual lift of a pump is always less than the theoretical lift and is limited by the (A) Specific gravity & temperature of the liquid (B) Leakage & pressure decreasing at higher elevations (C) Frictional resistance through pipes, fittings & passages (D) All (A), (B) and (C)

Description : Actual lift of a pump is always less than the theoretical lift and is limited by the (A) Specific gravity & temperature of the liquid (B) Leakage & pressure decreasing at higher elevations (C) Frictional resistance through pipes, fittings & passages (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

When the water is warm, the height to which it can be lifted by a pump (A) Decreases due to reduced viscosity (B) Decreases due to reduced vapour pressure (C) Increases due to increased vapour pressure (D) Decreases due to increased frictional resistance

Description : When the water is warm, the height to which it can be lifted by a pump (A) Decreases due to reduced viscosity (B) Decreases due to reduced vapour pressure (C) Increases due to increased vapour pressure (D) Decreases due to increased frictional resistance

Last Answer : (B) Decreases due to reduced vapour pressure

In a naturally aspirated diesel engine, the air is supplied by a A. supercharger B. centrifugal pump C. movement of engine piston D. reciprocating pump

Description : In a naturally aspirated diesel engine, the air is supplied by a A. supercharger B. centrifugal pump C. movement of engine piston D. reciprocating pump

Last Answer : ANSWER : C

The non-clog pump which permits solid matter to pass out with the liquid sewage, is A. Centrifugal pump B. Reciprocating pump C. Pneumatic ejector D. None of these

Description : The non-clog pump which permits solid matter to pass out with the liquid sewage, is A. Centrifugal pump B. Reciprocating pump C. Pneumatic ejector D. None of these

Last Answer : ANS: A