The following graph represents the installed capacity for cement production (in tonnes) and the actual production (in tonnes) of nine cement plants of a cement company. Capacity utilization of a plant is defined as ratio of actual production of cement to installed capacity. A plant with installed capacity of at least 200 tonnes is called a large plant and a plant with lesser capacity is called a small plant. The difference between total production of large plants and small plants, in tonnes is _____

The following graph represents the installed capacity for cement production (in tonnes) and the actual production (in tonnes) of nine cement plants of a cement company. Capacity utilization of a plant is defined as ratio of actual production of cement to installed capacity. A plant with installed capacity of at least 200 tonnes is called a large plant and a plant with lesser capacity is called a small plant. The difference between total production of large plants and small plants, in tonnes is _____

image

by

1 Answer

Answer :

Correct answer is 120.

image

by

Related questions

If | | 9 6 y − = 3, then y y 3 2 4 - is _____ (A) 0 (B) 3 +1 (C) 3 1 - (D) undefined

Description : ........

Last Answer : Correct option is (C). 

The chairman requested the aggrieved shareholders to _____ him. (A) bare with (B) bore with (C) bear with (D) bare

Description : The chairman requested the aggrieved shareholders to _____ him. (A) bare with (B) bore with (C) bear with (D) bare

Last Answer : Correct option is (C). ‘bear with’ means to be patient with some one

This book, including all its chapters,_____ interesting. The students as well as the instructor in ______ agreement about it. (A) is, was (B) are, are (C) is, are (D) were, was

Description : This book, including all its chapters,_____ interesting. The students as well as the instructor in ______ agreement about it. (A) is, was (B) are, are (C) is, are (D) were, was

Last Answer : c

A poll of students appearing for masters in engineering indicating that 60% of the students believed that mechanical engineering is a profession unsuitable for women. A research study on women with master or higher degrees in mechanical engineering found that 90% of such women were successful in their professions. Which of the following can be logically inferred from the above paragraph? (A) Many students have misconceptions regarding various engineering disciplines. (B) Men with advanced degrees in mechanical engineering believe women are well suited to be mechanical engineers. (C) Mechanical engineering is a profession well suited for women with masters or higher degrees in mechanical engineering. (D) The number of women pursing higher degrees in mechanical engineering is small.

Description : A poll of students appearing for masters in engineering indicating that 60% of the students believed that mechanical engineering is a profession unsuitable for women. A research study on women with ... engineering. (D) The number of women pursing higher degrees in mechanical engineering is small.

Last Answer : Correct option is (C). A poll says that women with masters or higher degrees in mechanical engineers are successful in their professions. This statement leads to the option (C) which is the best inference

Shaquille O’ Neal is a 60% career free throw shooter, meaning that he successfully makes 60 free throws out of 100 attempts on average. What is the probability that he will successfully make exactly 6 free throws in 10 attempts? (A) 0.2508 (B) 0.2816 (C) 0.2934 (D) 0.6000

Description : Shaquille O’ Neal is a 60% career free throw shooter, meaning that he successfully makes 60 free throws out of 100 attempts on average. What is the probability that he will successfully make exactly 6 free throws in 10 attempts? (A) 0.2508 (B) 0.2816 (C) 0.2934 (D) 0.6000

Last Answer : Correct option is (A).

Sourya committee had proposed the establishment of sourya institutes of Technology (SITs) in line with Indian Institutes of Technology (IITs) to cater to the technological and industrial needs of a developing country Which of the following can be logically inferred from the above sentence? Based on the proposal, (i) In the initial years, SIT students will get degrees from IIT. (ii) SITs will have a distinct national objective. (iii) SITs like institutions can only be established in consultation with IIT. (iv) SITs will serve technological needs of a developing country. (A) (iii) and (iv) only (B) (i) and (iv) only (C) (ii) and (iv) only (D) (ii) and (iii) only

Description : Sourya committee had proposed the establishment of sourya institutes of Technology (SITs) in line with Indian Institutes of Technology (IITs) to cater to the technological and industrial needs of a developing country Which of the ... (iv) only (C) (ii) and (iv) only (D) (ii) and (iii) only

Last Answer : Correct option is (C). Option (i) and (iii) state phrases like ‘in the initial years’ and ‘SIT like institutions can only be established in consultation with IIT’ cannot be logically inferred so (ii) and (iv) are the best inferences i.e. option (C) 

R2D2 is a robot. R2D2 can repair aeroplanes. No other robot can repair aeroplanes. Which of the following can be logically inferred from the above statements? (A) R2D2 is a robot which can only repair aeroplanes. (B) R2D2 is the only robot which can repair aeroplanes. (C) R2D2 is a robot which can repair only aeroplanes. (D) Only R2D2 is a robot.

Description : R2D2 is a robot. R2D2 can repair aeroplanes. No other robot can repair aeroplanes. Which of the following can be logically inferred from the above statements? (A) R2D2 is a robot which can only repair aeroplanes. ... . (C) R2D2 is a robot which can repair only aeroplanes. (D) Only R2D2 is a robot.

Last Answer : Correct option is (B). The statement ‘No other robot can repair aeroplanes’ means R2D2 is the only robot which can repair aeroplanes so option (B) is the best inference

Pick the odd one out in the following: 13, 23, 33, 43, 53 (A) 23 (B) 33 (C) 43 (D) 53

Description : Pick the odd one out in the following: 13, 23, 33, 43, 53 (A) 23 (B) 33 (C) 43 (D) 53

Last Answer : Correct option is (B). In the group of given numbers, all are prime numbers but 33 is not

Identify the correct spelling out of the given options: (A) Managable (B) Manageable (C) Mangaeble (D) Managible

Description : Identify the correct spelling out of the given options: (A) Managable (B) Manageable (C) Mangaeble (D) Managible

Last Answer : Correct option is (B). ‘manageable’ is the correct spelling

How to Build a Gate

Description : How to Build a Gate

Last Answer : How to Build a Gate Having a gate that is well built and smoothly functioning makes entry and exit to a private space even more rewarding. Whether to keep children or pets in or unwanted animals and ... swinging. Make sure you know which way you want the door to swing before you screw it on.

Function of OR Gate its logical symbol and truth table.

Description : Function of OR Gate its logical symbol and truth table.

Last Answer : Function: - OR gate is used to perform logical addition. So used in adder subtractor and logic circuits where logical Oring is required. Used to implement SOP form equations. Also used in PLA logic. Logical symbol of OR gate :- Truth table:- 

GATE 2020 syllabus electrical engineering

Description : GATE 2020 syllabus electrical engineering

Last Answer : EE: Electrical Engineering Section 1: Engineering Mathematics Linear Algebra: Matrix Algebra, Systems of linear equations, Eigenvalues, Eigenvectors. Calculus: Mean value theorems, Theorems of ... to dc converters, Single phase and three phase inverters, Sinusoidal pulse width modulation.

Sketch symbol of NAND gate and NOR gate.

Description : Sketch symbol of NAND gate and NOR gate.

Last Answer : Symbol of NAND gate and NOR gate

In the circuit shown below, the current through the inductor is,

Description : In the circuit shown below, the current through the inductor is,

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Explain MOSFET gate drive circuit and totem pole configuration.

Description : Explain MOSFET gate drive circuit and totem pole configuration.

Last Answer : MOSFET gate drive circuit: The turning on and turning off of MOSFET can be controlled from gate to source voltage signal. If the gate to source voltage of MOSFET exceeds threshold ... this configuration, the two switches (transistors) are used in totem pole arrangement with a comparator.

Explain thyristor gate drive circuit.

Description : Explain thyristor gate drive circuit.

Last Answer : Thyristor Gate Drive Circuit: The thyristor can be turned on by pulse voltage signal at gate terminal and it does not require continuous drive signal like the transistor. The gate ... circuit provide required minimum gate voltage and gate current then the thyristor conducts properly.

What is the propagation delay of a logic gate?

Description : What is the propagation delay of a logic gate?

Last Answer : The application input pulse and the occurrence of resulting output pulse is called propagation delay of logic gate.

What is the purpose of a NAND gate?

Description : What is the purpose of a NAND gate?

Last Answer : Nand gate has 2 inputs and only 1 output and it is equivalent of an and gate. The output of a nand gate is high(1) only when anyone or both inputs are low(0).and the output of nand gate is low(0) only when both the inputs are high(1).nand gate is also called as universal gate.

What is an inverter gate?

Description : What is an inverter gate?

Last Answer : Not gate is known as inverter gate as it inverts the I/P

What does the AND gate do?

Description : What does the AND gate do?

Last Answer : AND gate multiple two inputs. If any one input is zero output will be zero if both inputs are one then only output is one.

Justify. Power MOSFET is operated at high enough gate source voltage to minimize the conduction losses.

Description : Justify. Power MOSFET is operated at high enough gate source voltage to minimize the conduction losses. 

Last Answer : MOSFET is metal oxide field effect transistor. MOSFET is a voltage controlled device. MOSFET is majority carrier device. MOSFET are of two one is n-channel MOSFET and p-channel MOSFET. Gate, ... . Hence, power MOSFET is operated at high enough gate-source voltage to minimize the conduction losses.

basic gate drive circuit of GTO

Description : basic gate drive circuit of GTO

Last Answer : basic gate drive circuit of GTO

can we turn off thyristor using Gate?

Last Answer : No we cannot turn off normal thyristor using Gate.

what is gate turn off thyristor (GTO)?

Description : Draw the structural diagram of GTO. Explain briefly the switching behavior of GTO with the help of appropriate voltage and current waveform.

Last Answer : Gate Turn Off Thyristor (GTO) Conventional Thyristor can be turned on with gate terminal but can not turn off from gate terminal. But in case of Gate Turn Off Thyristor (GTO), we can turn it on and off ... subdivided as storage period (Ts), fall period (Tp) and tail period (Tt).

Capacity utilization - (1) is usually near 100 percent. (2) represents the percent of the labour force that is employed. (3) is a measure of the proportional of the existing capital stock used for current production. (4) rises as the economy moves into a recession, since firms must replace unemployed workers with some other resources to maintain production.

Description : Capacity utilization - (1) is usually near 100 percent. (2) represents the percent of the labour force that is employed. (3) is a measure of the proportional of the existing capital ... into a recession, since firms must replace unemployed workers with some other resources to maintain production.

Last Answer : (3) is a measure of the proportional of the existing capital stock used for current production. Explanation: Capacity utilisation refers to the extent or level to which the productive capacity of a ... as a percentage, it is computed by dividing the total capacity with the portion being utilized.

In respect of total foodgrains production during 2007-08 in India, which is correct in production (million tonnes) ? (A) 230•67 (B) 207•00 (C) 217•85 (D) 200•00 (E) None of these

Description : In respect of total foodgrains production during 2007-08 in India, which is correct in production (million tonnes) ? (A) 230•67 (B) 207•00 (C) 217•85 (D) 200•00 (E) None of these

Last Answer : (C) 217•85

The graph shown in the illustration represents the speed droop curves of two equal capacity alternators about to be paralleled. When paralleled, the greater portion of the total load above 60% for each unit will be picked up _____________. EL-0025 A. by unit 'A' B. by unit 'B' C. equally by each unit D. none of the above

Description : The graph shown in the illustration represents the speed droop curves of two equal capacity alternators about to be paralleled. When paralleled, the greater portion of the total load above 60% for each unit will be picked up ... unit 'A' B. by unit 'B' C. equally by each unit D. none of the above

Last Answer : Answer: A

A bus and a truck are available to cross a jungle. The speed of the truck is thrice that of the bus. The capacity of the truck is 60 persons and that of bus is 40 persons. The average occupancy of the bus is twice that of the truck. The tickets for the bus and the truck cost Re 1 and Re 1.50 respectively. What is the ratio of the average rupee collection of the truck to that of the bus in a day? Assume there is no wastage time between trips and the occupancy of the bus/truck is defined as the ratio of the actual number of persons boarding it and its capacity. a) 9:17 b) 17:9 c) 8:27 d) 27:8 e) None of these

Description : A bus and a truck are available to cross a jungle. The speed of the truck is thrice that of the bus. The capacity of the truck is 60 persons and that of bus is 40 persons. The average occupancy of the bus is twice ... boarding it and its capacity. a) 9:17 b) 17:9 c) 8:27 d) 27:8 e) None of these

Last Answer :  Answer: D Average Rupee collection = Speed× capacity × Occupancy × Ticket rate Ratio of average Rupee collection of truck to that of bus= product of above rate According to question, (3×60×1×1.5):(1×40×2×1)= 270:80=27:8

Calculate the most appropriate unit cost for a distribution division of a multinational company using the following information. Miles travelled 636,500 Tonnes carried 2,479 Number of drivers 20 Hours worked by drivers 35,520 Tonnes miles carried 375,200 Cost incurred 562,800 (a) Rs .88 (b) Rs 1.50 (c) Rs 15.84 (d) Rs28, 140

Description : Calculate the most appropriate unit cost for a distribution division of a multinational company using the following information. Miles travelled 636,500 Tonnes carried 2,479 Number of drivers 20 Hours worked by drivers 35,520 Tonnes miles ... 800 (a) Rs .88 (b) Rs 1.50 (c) Rs 15.84 (d) Rs28, 140

Last Answer : (d) Rs28, 140

Match the columns (a) Activity Ratio -------------------- i) (Actual hours worked / Budgeted hours) * 100 (b) Capacity Ratio ------------------ ii) (Standard hours of actual production / Actual hours worked) * 100 (c) Efficiency Ratio ----------------- iii) (Standard hours for actual output / Budgeted hours) * 100 A. A-ii, B-iii, C-i B. A-i, B-ii, C-iii C. A-iii, B-i, C-ii D. None of the above

Description : Match the columns (a) Activity Ratio -------------------- i) (Actual hours worked / Budgeted hours) * 100 (b) Capacity Ratio ------------------ ii) (Standard hours of actual production / Actual hours worked) * 100 ( ... , B-iii, C-i B. A-i, B-ii, C-iii C. A-iii, B-i, C-ii D. None of the above

Last Answer : C. A-iii, B-i, C-ii

Diaphragm electrolytic cell as compared to mercury electrolytic cell (A) Produces 70% NaOH solution (B) Requires less specific power consumption for the production of chlorine (C) Requires lesser investment for similar capacity (D) All (A), (B) and (C)

Description : Diaphragm electrolytic cell as compared to mercury electrolytic cell (A) Produces 70% NaOH solution (B) Requires less specific power consumption for the production of chlorine (C) Requires lesser investment for similar capacity (D) All (A), (B) and (C)

Last Answer : (C) Requires lesser investment for similar capacity

As part of National Climate Change Policy, Indian government is planning to raise the installed capacity of renewable energy by the year 2030 to (A) 175 GW (B) 200 GW (C) 250 GW (D) 350 GW

Description : As part of National Climate Change Policy, Indian government is planning to raise the installed capacity of renewable energy by the year 2030 to (A) 175 GW (B) 200 GW (C) 250 GW (D) 350 GW

Last Answer : Answer: D

The ratio of the average load to the installed capacity of the plant whose reserve capacity is zero will be equal to (A) Load factor (B) Plant factor (C) Utilisation factor (D) Both (A) and (B)

Description : The ratio of the average load to the installed capacity of the plant whose reserve capacity is zero will be equal to (A) Load factor (B) Plant factor (C) Utilisation factor (D) Both (A) and (B)

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The ratio of the total sediment deposited in the reservoir to the total sediment flowing in the river, is called trap efficiency (B) Small capacity reservoirs on large rivers generally, silt less (C) Large capacity reservoirs on small rivers generally silt more (D) All the above

Description : Pick up the correct statement from the following:  (A) The ratio of the total sediment deposited in the reservoir to the total sediment flowing in  the river, is called trap efficiency  ( ... less  (C) Large capacity reservoirs on small rivers generally silt more  (D) All the above

Last Answer : (D) All the above

The strength of brick masonry in 1:6 cement mortar, is (A) 20 tonnes/m2 (B) 40 tonnes/m2 (C) 50 tonnes/m2 (D) 60 tonnes/m

Description : The strength of brick masonry in 1:6 cement mortar, is (A) 20 tonnes/m2 (B) 40 tonnes/m2 (C) 50 tonnes/m2 (D) 60 tonnes/m

Last Answer : Answer: Option C

Periodic testing of circuit breakers is necessary to assure that a correctly rated and properly installed unit _________________. A. can trip faster as it increases in age B. will continue to provide the original degree of protection C. does not exceed its interrupting capacity D. be able to withstand at least 125% of applied voltage

Description : Periodic testing of circuit breakers is necessary to assure that a correctly rated and properly installed unit _________________. A. can trip faster as it increases in age B. will continue to provide ... not exceed its interrupting capacity D. be able to withstand at least 125% of applied voltage

Last Answer : Answer: B

Work index is defined as the (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen (B) Energy needed to crush one tonne of feed to 200 microns (C) Energy (kWh/ton of feed) needed to crush small feed to such a size that 80% of the product passes a 200 mesh screen (D) Energy needed to crush one ton of feed to 100 microns

Description : Work index is defined as the (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen (B) Energy needed to crush ... of the product passes a 200 mesh screen (D) Energy needed to crush one ton of feed to 100 microns

Last Answer : (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen

Utiliza Utilization is calculat tion is calculated as: a)Utilization = Actual hours*Scheduled available hours b)Utilization = Actual hours/ Scheduled available hours c)Utilization = Actual hours+Scheduled available hours d) None of the above

Description : Utiliza Utilization is calculat tion is calculated as: a)Utilization = Actual hours*Scheduled available hours b)Utilization = Actual hours/ Scheduled available hours c)Utilization = Actual hours+Scheduled available hours d) None of the above

Last Answer : b)Utilization = Actual hours/ Scheduled available hours

The energy consumption and production patterns in a chemical plant over a 9 month period is provided in the table below; Month 1 2 3 4 5 6 7 8 9 Production in Tonnes / month 493 297 381 479 585 440 234 239 239 Energy Consumption MWh /month 78.2 75.7 76.3 76.1 78.1 70.7 73.7 64.4 72.1 Estimate the cumulative energy savings at end of the 9th month and give your inference on the result ? ( consider 9 month data for evaluation for predicted energy consumption)

Description : The energy consumption and production patterns in a chemical plant over a 9 month period is provided in  the table below; Month 1 2 3 4 5 6 7 8 9 Production in Tonnes / month 493 ... and give your inference on the  result ? ( consider 9 month data for evaluation for predicted energy consumption)

Last Answer : It is required to use the equations Y= mX + C and  nC + mΣX = ΣY  cΣX + mΣX2 = ΣXY Month X =  Production in  Tonnes /  month Y =Energy  Consumption MWh  /month  X 2 XY 1 493 78.2 ... 73.7 54756 17240.63 8 239 64.4 57121 15402.96 9 239 72.1 57121 17228.98 3387 665.3 1410683 253221

Which field of cookie in WWW represents the server's directory structure by identifying the utilization of part associated with server's file tree? a. Domain b. Path c. Content d. Secure

Description : Which field of cookie in WWW represents the server's directory structure by identifying the utilization of part associated with server's file tree? a. Domain b. Path c. Content d. Secure

Last Answer : b. Path

The mass of 2.5 m3 of a certain liquid is 2 tonnes. Its mass density is (A) 200 kg/m3 (B) 400 kg/m3 (C) 600 kg/m3 (D) 800 kg/m

Description : The mass of 2.5 m3 of a certain liquid is 2 tonnes. Its mass density is (A) 200 kg/m3 (B) 400 kg/m3 (C) 600 kg/m3 (D) 800 kg/m

Last Answer : Answer: Option D

A tractor whose weight is 20 tonnes has a drawbar pull of 2500 kg, when operated on a level road having a rolling resistance of 30 kg per tonne. If this tractor is operated on a level road having a rolling resistance of 40 kg per tonne, then the drawbar pull of the tractor will (A) Reduce by 200 kg (B) Increase by 200 kg (C) Increase by 250 kg (D) Reduce by 250 kg

Description : A tractor whose weight is 20 tonnes has a drawbar pull of 2500 kg, when operated on a level road having a rolling resistance of 30 kg per tonne. If this tractor is operated on a level road having a rolling resistance ... 200 kg (B) Increase by 200 kg (C) Increase by 250 kg (D) Reduce by 250 kg

Last Answer : (A) Reduce by 200 kg

Plant utilization budget and Manufacturing overhead budgets are types of A. Production budget B. Sales budget C. Cost budget D. None of the above

Description : Plant utilization budget and Manufacturing overhead budgets are types of A. Production budget B. Sales budget C. Cost budget D. None of the above

Last Answer : C. Cost budget

A pile is being driven with a drop hammer weighing 1800 kg and having a free fall of 1.00 m. If the penetration with last blow is 5 mm, the load carrying capacity of the pile, -according to the Engineering News formula, is (A) 100 tonnes (B) 50 tonnes (C) 20 tonnes (D) 10 tonnes

Description : A pile is being driven with a drop hammer weighing 1800 kg and having a free fall of 1.00 m. If the penetration with last blow is 5 mm, the load carrying capacity of the pile, -according to the Engineering News formula, is (A) 100 tonnes (B) 50 tonnes (C) 20 tonnes (D) 10 tonnes

Last Answer : (D) 10 tonnes

If the bearing capacity of soil is 10 tonnes/cm2 and the projection of plain concrete footing from walls, is a cm, the depth D of footing is (A) D = 0.0775 a (B) D = 0.775 a (C) D = 0.775 a (D) D = 0.775 a2

Description : If the bearing capacity of soil is 10 tonnes/cm2 and the projection of plain concrete footing from walls, is a cm, the depth D of footing is (A) D = 0.0775 a (B) D = 0.775 a (C) D = 0.775 a (D) D = 0.775 a2

Last Answer : Answer: Option B

Maximum daily traffic capacity of bituminous pavements is (A) 500 tonnes per day (B) 1000 tonnes per day (C) 1500 tonnes per day (D) 2000 tonnes per day

Description : Maximum daily traffic capacity of bituminous pavements is (A) 500 tonnes per day (B) 1000 tonnes per day (C) 1500 tonnes per day (D) 2000 tonnes per day

Last Answer : Answer: Option C

What is the capacity of Benson boiler? a) 180 tonnes/hr & above b) 150 tonnes/hr & above c) 250 tonnes/hr & above d) 300 tonnes/hr & above

Description : What is the capacity of Benson boiler? a) 180 tonnes/hr & above b) 150 tonnes/hr & above c) 250 tonnes/hr & above d) 300 tonnes/hr & above

Last Answer : b) 150 tonnes/hr & above

A refrigerator is working on reversed carnot cycle between temperature of 30°C to –10°C with capacity of 10 tonnes. Calculate. (i) The COP (ii) Define ton of refrigeration (iii) Give the industrial application of refrigeration

Description : A refrigerator is working on reversed carnot cycle between temperature of 30°C to –10°C with capacity of 10 tonnes. Calculate. (i) The COP (ii) Define ton of refrigeration (iii) Give the industrial application of refrigeration

Last Answer : (ii) Ton of refrigeration: It is defined as the quantity of heat required to be removed from 1Ton water at 0oC to get ice at 0oC in one day. (iii) Industrial applications of refrigeration ... food stuff such as meat, fruit, fruit juice, vegetables etc. 5. Ice cooling of concrete for dam.

The deficiency in rain catch due to vertical acceleration of air forced upward over the gauge, is (A) Greater for heavy rain (B) Greater for lighter rain (C) Greater for large drops (D) Lesser for small rain drops

Description : The deficiency in rain catch due to vertical acceleration of air forced upward over the gauge, is (A) Greater for heavy rain (B) Greater for lighter rain (C) Greater for large drops (D) Lesser for small rain drops

Last Answer : Answer: Option B