Compare liquid fuels with solid fuels.

Compare liquid fuels with solid fuels.
by

1 Answer

Answer :

S.N.
Solid fuel
Liquid fuel 
1 Require more space for storage.
Require less space for storage.
2 Lower calorific value
Higher calorific value
3 Difficult control of consumption
Easy control of consumption
4 ash produced
No ash produced
5 deterioration of the oil in storage
Non-deterioration of the oil in storage
by

Related questions

List properties of Fuels

Description : List properties of Fuels

Last Answer : Properties of fuels: 1. It should possess high calorific value. 2. It should have proper ignition temperature. The ignition temperature of the fuel should either be neither too low nor too high. 3. It ... moisture content. 9. It should be cheap. 10. It should be easy to handle and transport. 

Give the classification of Fuels.

Description : Give the classification of Fuels.

Last Answer : Give the classification of Fuels.

Define isothermal efficiency of compressor.

Description : Define isothermal efficiency of compressor.

Last Answer : Isothermal Efficiency of compressor: It is the ratio of isothermal work (or power) required to drive compressor to the actual work required to drive compressor for the same pressure ratio. Mathematically isothermal efficiency is given as the ratio of isothermal power to shaft or brake power. 

Draw P-V and T-S diagram for isochoric process.

Description : Draw P-V and T-S diagram for isochoric process.

Last Answer : Isochoric Process: 

Explain construction and working of two stage reciprocating air compressors.

Description : Explain construction and working of two stage reciprocating air compressors.

Last Answer : Figure: Two Stage Reciprocating air compressor Construction and Working : It consists of two cylinders (L.P. and H.P.) with water cooled intercooler and air receiver. First of all fresh air is ... (ie second stage) from 3 to 4 is delivered by the compressor at pressure P3 & Temp T4.

Describe construction and working of closed cycled gas turbine.

Description : Describe construction and working of closed cycled gas turbine.

Last Answer : Construction: In above figure shows a closed cycle gas turbine which consists of compressor, heating chamber gas turbine which drives the generator, compressor and a cooling chamber.  ... is cooled at constant pressure with the help of circulating air is circulated through compressor.

Explain the construction and working of Turbo-prop engine.

Description : Explain the construction and working of Turbo-prop engine.

Last Answer : Turboprop Engine: Construction and working: It consists of diffuser, compressor, combustion chamber, turbine, nozzle and propeller. Figure shows a turboprop system employed in aircrafts. Here ... energy of the incoming air (equal to aircraft velocity) into pressure energy by diffuser.

State necessity of multistaging and Intercooling of air compressor.

Description : State necessity of multistaging and Intercooling of air compressor.

Last Answer : Necessity of multistaging - For producing high pressure i.e. more than 8 bar, single stage air compressor suffers fallowing drawbacksi) Size of cylinder is too large ii) Rise ... also automatically decreased and volumetric efficiency is also decreases. To avoid this intercooling is necessary.

Explain the sources of air leakage in condenser.

Description : Explain the sources of air leakage in condenser.

Last Answer : Sources of air leakage in condenser 1. Air leak through joints and packing. Air leaks into condenser as pressure inside falls below atmospheric pressure. 2. Air also comes in condenser with the steam. ... separated at low pressure in the condenser 4. Air leaks if any bypass seal is broken.

Draw P-V and T-S diagram of dual combustion cycle.

Description : Draw P-V and T-S diagram of dual combustion cycle.

Last Answer : Dual combustion cycle: 1-2 Isentropic compression of air 2-3 the combustion of fuel at constant volume. 3-4 the combustion of fuel at constant pressure 4-5 Isentropic expansion during which work is done by the system. 5-1 Heat rejection at constant volume.

Differentiate between : (i) Reciprocating and rotary air compressor (ii) Centrifugal and axial flow compressor

Description : Differentiate between : (i) Reciprocating and rotary air compressor (ii) Centrifugal and axial flow compressor

Last Answer : (i) Reciprocating and rotary air compressor: Sr. No. Reciprocating air compressor  Rotary air compressor  1 It is having to and fro motion. It is having rotary ... I.C. engine and for refrigerants and industrial gases. Used universally with large gas turbine. 

Explain two pass down flow surface condenser with a neat sketch.

Description : Explain two pass down flow surface condenser with a neat sketch.

Last Answer : Two pass down flow surface condenser: It consists of horizontal cast iron cylindrical vessel pack with tubes, through which the cooling water flows. The ends of the condenser are cut off by vertical ... convert into water; therefore whole condensate can be the reused in the boiler. 

(i) Explain construction and working of geothermal power plant. (ii) Explain the construction and working of bomb calorimeter.

Description : (i) Explain construction and working of geothermal power plant. (ii) Explain the construction and working of bomb calorimeter.

Last Answer : (i) Geothermal power plant: Construction and Working: geothermal power plant which consists of the following main components: Underground steam storage, steam separator, steam separator, turbine and Generator. Steam is ... . From the above data the calorific value of the fuel can be found. 

Explain combustion chemistry of carbon, hydrogen and methane.

Description : Explain combustion chemistry of carbon, hydrogen and methane.

Last Answer : Combustion chemistry of carbon, methane and hydrogen: i) Carbon: Burning of carbon to carbon dioxide ( complete combustion )  That means 1 kg of carbon needs 2.67 kg oxygen and produces 3.67 ... equitation 1 kg of hydrogen combines with 8 kg of oxygen to produce 9 kg of steam. 

Draw and label the gas turbine power plant

Description : Draw and label the gas turbine power plant

Last Answer : OR

Explain working of thermal power plant.

Description : Explain working of thermal power plant.

Last Answer : Working of thermal power plant: In this power plant, coal is used as a fuel for combustion in combustion chamber. After combustion of fuel the heat is generated and this heat is given to the ... by using cooling water and this condensate again used for the boiler with the help of feed pump. 

Draw P-V and T-S diagram for brayton cycle.

Description : Draw P-V and T-S diagram for brayton cycle.

Last Answer : P-V and T-S diagram for brayton cycle.

Give classification of air compressor.

Description : Give classification of air compressor.

Last Answer : Give classification of air compressor.

Explain the factors affecting volumetric efficiency of reciprocating air compressor.

Description : Explain the factors affecting volumetric efficiency of reciprocating air compressor.

Last Answer : Factors affecting volumetric efficiency of reciprocating air compressor: 1) Clearance Volume 2) Restricted passage and leakage at inlet valves 3) Speed of rotation 4) Piston ring leakages ... wall, it get expanded, which decreases the charge taken in therefore volumetric efficiency decreases.

Explain the working of La-mont boiler

Description : Explain the working of La-mont boiler

Last Answer : La-mont boiler: Working: The La-mont boiler consists Boiler shell, combustion chamber, evaporator, economizer, circulating pump, super heater, and steam drum. This is modern high ... drawn through the super heater. The superheated steam so obtained is then supplied to the prime mover.

Draw neat and labeled sketch of three pass packages type boiler.

Description : Draw neat and labeled sketch of three pass packages type boiler. 

Last Answer : Each set of tubes that hot combustion flue gas travels through before making a turn within the boiler, is considered a "pass." A 3-pass fire tube boiler design consists of three sets of ... design that allows more heat transfer time to deliver the same or higher efficiency rating. 

Describe the different modes of heat transfer.

Description : Describe the different modes of heat transfer.

Last Answer : Mode of heat transfer:- 1) Conduction 2) Convection 3) Radiation 1) Conduction- It is the mode of heat transfer from one part of substance to another part of same substance or one ... in the form of electromagnetic waves. Example: The heat energy receives from sun to the earth surface. 

Explain Otto cycle with P-V and T-S diagram.

Description : Explain Otto cycle with P-V and T-S diagram.

Last Answer : This cycle is so named as it was conceived by Otto'. On this cycle, petrol, gas and many types of oil engines work. It is the standard of comparison for internal combustion engines. Figs. ... 4-1 shows the rejection of heat by air at constant volume till original state (point 1) reaches.

Describe the working of Turbojet Engine

Description : Describe the working of Turbojet Engine

Last Answer : Turbojet Engine OR Working :Turbo-jet engine consists of diffuser, compressor, combustion chamber turbine and nozzle. At entrance air diffuser causes rise in pressure in entering air ... and thrust of propulsion is produced. The velocity in the nozzle is grater then flight velocity.

Explain the phases of formation of steam.

Description : Explain the phases of formation of steam.

Last Answer : Different phases of Formation of steam Consider formation of steam from ice at -200 C i)Solid phase- When the heat is added in ice which is at -20 0C, the temperature of ice increases ... the temperature of steam which is called as superheating and in this region only vapour is present.

Represent Isobaric, Isochoric, Isothermal, Adiabatic process on P-V and T-S diagram.

Description : Represent Isobaric, Isochoric, Isothermal, Adiabatic process on P-V and T-S diagram.

Last Answer : Isobaric process Isothermal process Isochoric process Adiabatic process:

Enlist conventional and non-conventional energy sources.

Description : Enlist conventional and non-conventional energy sources.

Last Answer : Conventional energy source:  1) Coal 2) natural gas 3) oil 4) fire wood. Non-conventional energy sources:  1) Solar power 2) Hydro-electric power 3) Wind power 4) Tidal power 5) Ocean wave power 6) Geothermal power 7) Ocean thermal power 8) Biomass, Bio-fuel etc.

Give the classification of gas turbine

Description : Give the classification of gas turbine

Last Answer : Answer: Classification of gas turbine:  1. According to the path of the working substance: i) Open cycle gas turbine ii) Close cycle gas turbine iii) Semi-closed cycle gas turbine 2. According ... turbine ii) Reaction turbine 5. According to their usage: i) Constant speed ii) Variable speed

List down the uses of compressed air

Description : List down the uses of compressed air

Last Answer : Application of compressed air:  1. Operating tools in factories 2. Operating drills and hammers in road building 3. Starting diesel engines 4. Operating brakes on buses, trucks and trains 5. Spray painting 6. Excavating 7. To clean the large workshops Etc.

Define free air delivered of compressor

Description : Define free air delivered of compressor

Last Answer : Free Air Delivered (FAD): any two points It is the actual volume of air delivered by the compressor when reduced to NTP. FAD is a flow rate of air derived from measurement at the ... outlet of a compressor, converted back to the actual inlet (free air) conditions before it was compressed.

Define sensible heat and latent heat

Description : Define sensible heat and latent heat 

Last Answer : Latent heat: It is defined as the quantity of heat required for phase change of working substance at saturation temperature. OR The amount of heat added at saturation temperature is called latent ... thermometer. OR The amount of heat added up to saturation temperature is called sensible heat.

List different types of ideal gas processes

Description : List different types of ideal gas processes

Last Answer : Following are the different types of ideal gas processes  1. Isochoric (constant volume process) 2. Isobaric (constant pressure process) 3. Isothermal (constant temperature process) 4. Isentropic (constant entropy process) 5. Polytropic process 

The unit heat rate characteristic of a thermal power unit shows :

Description : The unit heat rate characteristic of a thermal power unit shows :  (A) Heat input per kWh of output versus the megawatt output of unit  (B) Heat input per kW of output versus the megawatt output ... hour output of unit  (D) Heat input per kW of output versus the megawatt hour output of unit

Last Answer : The unit heat rate characteristic of a thermal power unit shows : Heat input per kWh of output versus the megawatt output of unit 

Explain with reason through which side of shell and tube heat exchanges, the following liquids are directed. (i) viscous liquid (ii) high pressure liquid (iii) corrosive liquid

Description : Explain with reason through which side of shell and tube heat exchanges, the following liquids are directed. (i) viscous liquid (ii) high pressure liquid (iii) corrosive liquid

Last Answer : Viscous liquid : Viscous liquid is passed through shell side Reason: because of the presence of baffles in the shell induce turbulence and hence increases heat transfer rate. High pressure liquid: High ... To avoid expensive alloy shells (in order to save the cost of expensive material for shell).

With neat sketch explain the construction and working of heat exchanger used for handling corrosive liquid.

Description : With neat sketch explain the construction and working of heat exchanger used for handling corrosive liquid.

Last Answer : Graphite block heat exchanger:   Graphite heat exchangers are well suited for handling corrosive fluids. Graphite is inert towards most corrosive fluids and has very high thermal conductivity. Graphite being ... vertical faces direct the service fluid through the exchanger in a cross flow.

Explain the type of multiple effect evaporator feed arrangement used for handling viscous liquid.

Description : Explain the type of multiple effect evaporator feed arrangement used for handling viscous liquid.

Last Answer : Backward feed arrangement  If the liquid is very viscous, then we have to adopt backward feed arrangement. In this arrangement, the feed solution and vapour flow is in opposite direction. Fresh feed is ... Not very common as it need pump. At low values of feed temperature higher economy.

List any two types of fuels used in electrical power generation plants.

Description : List any two types of fuels used in electrical power generation plants.

Last Answer : Types of fuels used in electrical power generation plants:  1) Solid fuels: Coal, Biomass: Wood, Nuclear fuel: Uranium, Plutonium  2) Liquid fuels: Diesel, Petrol  3) Gaseous Fuels: Natural gas, Producer ... 2) Wood 3) Uranium 4) Plutonium 5) Diesel 6) Petrol 7) Natural gas 8) Producer gas

How do Wire Rope Isolators (WRI) compare to elastomers regarding use over a broad temperature range?

Description : How do Wire Rope Isolators (WRI) compare to elastomers regarding use over a broad temperature range?

Last Answer : The WRI can be used over a greater temperature range with less change in performance. Proper elastomer selection will make elastomers useful for most applications.

Which Is Stronger Solid Steel Rod Or Hollow Steel Pipe?

Description : Which Is Stronger Solid Steel Rod Or Hollow Steel Pipe?

Last Answer : Answer :On a per pound basis, steel pipe is stronger in bending and is less likely to buckle in axial compression.

Why is my oven dripping a black liquid?

Description : Why is my oven dripping a black liquid?

Last Answer : Hehe. Looking at the residue, it might be plastic melting. It must be something melting…

Liquid crystal elastomers 4D printing material achieve their activation due to a. Light b. Heat c. Electrical d. All of the above

Description : Liquid crystal elastomers 4D printing material achieve their activation due to a. Light b. Heat c. Electrical d. All of the above

Last Answer : Ans:- d. All of the above

Does it change the temperature of the air?

Description : Does it change the temperature of the air?

Last Answer : The thermostat turned down . . .“simply adjust how long the air blows” yup that is it. The output “air” temp will be the same from the vents..

Heating question. See details?

Description : Heating question. See details?

Last Answer : The air intake is in the ceiling in the hall in front of our bedroom door. Keeping the door closed added a couple of degrees to the room’s temperature.

Is it ok to walk downtown with my umbrella open to block the heat from the sun?

Description : Is it ok to walk downtown with my umbrella open to block the heat from the sun?

Last Answer : I don’t see why it wouldn’t be. I saw a news article this morning about the heat wave that showed numerous people doing that. That’s a perfectly valid function of a portable umbrella even if it’s less common nowadays than it used to be.

Can you help me figure out what this figure is in this video of an explosion that happened in our city today?

Description : Can you help me figure out what this figure is in this video of an explosion that happened in our city today?

Last Answer : I tried to view it frame by frame but did not see the object. That looks like an oil filled transformer got too hot and blew up.

Does too much broiling wear out a broiling pan? Does too much baking wear out a cookie sheet?

Description : Does too much broiling wear out a broiling pan? Does too much baking wear out a cookie sheet?

Last Answer : Bakeware fatigue?

How do you beat the heat without AC?

Description : How do you beat the heat without AC?

Last Answer : Taking a cold shower about every hour, putting on thin cotton clothes while still wet. Or taking a cool shower with my clothes on. The dampness catches every little whisper of a breeze that comes through.

Can heat aggravate anxiety?

Description : Can heat aggravate anxiety?

Last Answer : Sure. Anything that makes you uncomfortable, especially if it seems difficult to get away from. Less clothing, less covers, open windows, fans, air conditioning, cold showers.

Why is the metal end of a thumb drive hot to the touch after copying files to it?

Description : Why is the metal end of a thumb drive hot to the touch after copying files to it?

Last Answer : Here’s the link that tells you why and a word of caution if it’s getting too hot because of defective ports.