Draw P-V and T-S diagram of dual combustion cycle.

1 Answer

Answer :

Dual combustion cycle:

image

1-2 Isentropic compression of air

2-3 the combustion of fuel at constant volume.

3-4 the combustion of fuel at constant pressure

4-5 Isentropic expansion during which work is done by the system.

5-1 Heat rejection at constant volume.

Related questions

Description : Draw P-V and T-S diagram for brayton cycle.

Last Answer : P-V and T-S diagram for brayton cycle.

Description : Draw P-V and T-S diagram for isochoric process.

Last Answer : Isochoric Process: 

Description : Explain Otto cycle with P-V and T-S diagram.

Last Answer : This cycle is so named as it was conceived by Otto'. On this cycle, petrol, gas and many types of oil engines work. It is the standard of comparison for internal combustion engines. Figs. ... 4-1 shows the rejection of heat by air at constant volume till original state (point 1) reaches.

Description : Represent Isobaric, Isochoric, Isothermal, Adiabatic process on P-V and T-S diagram.

Last Answer : Isobaric process Isothermal process Isochoric process Adiabatic process:

Description : Explain combustion chemistry of carbon, hydrogen and methane.

Last Answer : Combustion chemistry of carbon, methane and hydrogen: i) Carbon: Burning of carbon to carbon dioxide ( complete combustion )  That means 1 kg of carbon needs 2.67 kg oxygen and produces 3.67 ... equitation 1 kg of hydrogen combines with 8 kg of oxygen to produce 9 kg of steam. 

Description : Draw and label the gas turbine power plant

Last Answer : OR

Description : Draw neat and labeled sketch of three pass packages type boiler. 

Last Answer : Each set of tubes that hot combustion flue gas travels through before making a turn within the boiler, is considered a "pass." A 3-pass fire tube boiler design consists of three sets of ... design that allows more heat transfer time to deliver the same or higher efficiency rating. 

Description : Define isothermal efficiency of compressor.

Last Answer : Isothermal Efficiency of compressor: It is the ratio of isothermal work (or power) required to drive compressor to the actual work required to drive compressor for the same pressure ratio. Mathematically isothermal efficiency is given as the ratio of isothermal power to shaft or brake power. 

Description : Explain construction and working of two stage reciprocating air compressors.

Last Answer : Figure: Two Stage Reciprocating air compressor Construction and Working : It consists of two cylinders (L.P. and H.P.) with water cooled intercooler and air receiver. First of all fresh air is ... (ie second stage) from 3 to 4 is delivered by the compressor at pressure P3 & Temp T4.

Description : Describe construction and working of closed cycled gas turbine.

Last Answer : Construction: In above figure shows a closed cycle gas turbine which consists of compressor, heating chamber gas turbine which drives the generator, compressor and a cooling chamber.  ... is cooled at constant pressure with the help of circulating air is circulated through compressor.

Description : Explain the construction and working of Turbo-prop engine.

Last Answer : Turboprop Engine: Construction and working: It consists of diffuser, compressor, combustion chamber, turbine, nozzle and propeller. Figure shows a turboprop system employed in aircrafts. Here ... energy of the incoming air (equal to aircraft velocity) into pressure energy by diffuser.

Description : State necessity of multistaging and Intercooling of air compressor.

Last Answer : Necessity of multistaging - For producing high pressure i.e. more than 8 bar, single stage air compressor suffers fallowing drawbacksi) Size of cylinder is too large ii) Rise ... also automatically decreased and volumetric efficiency is also decreases. To avoid this intercooling is necessary.

Description : Explain the sources of air leakage in condenser.

Last Answer : Sources of air leakage in condenser 1. Air leak through joints and packing. Air leaks into condenser as pressure inside falls below atmospheric pressure. 2. Air also comes in condenser with the steam. ... separated at low pressure in the condenser 4. Air leaks if any bypass seal is broken.

Description : Differentiate between : (i) Reciprocating and rotary air compressor (ii) Centrifugal and axial flow compressor

Last Answer : (i) Reciprocating and rotary air compressor: Sr. No. Reciprocating air compressor  Rotary air compressor  1 It is having to and fro motion. It is having rotary ... I.C. engine and for refrigerants and industrial gases. Used universally with large gas turbine. 

Description : Explain two pass down flow surface condenser with a neat sketch.

Last Answer : Two pass down flow surface condenser: It consists of horizontal cast iron cylindrical vessel pack with tubes, through which the cooling water flows. The ends of the condenser are cut off by vertical ... convert into water; therefore whole condensate can be the reused in the boiler. 

Description : (i) Explain construction and working of geothermal power plant. (ii) Explain the construction and working of bomb calorimeter.

Last Answer : (i) Geothermal power plant: Construction and Working: geothermal power plant which consists of the following main components: Underground steam storage, steam separator, steam separator, turbine and Generator. Steam is ... . From the above data the calorific value of the fuel can be found. 

Description : Compare liquid fuels with solid fuels.

Last Answer : S.N. Solid fuel Liquid fuel  1 Require more space for storage. Require less space for storage. 2 Lower calorific value Higher calorific value 3 Difficult control ... ash produced 5 deterioration of the oil in storage Non-deterioration of the oil in storage

Description : Explain working of thermal power plant.

Last Answer : Working of thermal power plant: In this power plant, coal is used as a fuel for combustion in combustion chamber. After combustion of fuel the heat is generated and this heat is given to the ... by using cooling water and this condensate again used for the boiler with the help of feed pump. 

Description : Give classification of air compressor.

Last Answer : Give classification of air compressor.

Description : Explain the factors affecting volumetric efficiency of reciprocating air compressor.

Last Answer : Factors affecting volumetric efficiency of reciprocating air compressor: 1) Clearance Volume 2) Restricted passage and leakage at inlet valves 3) Speed of rotation 4) Piston ring leakages ... wall, it get expanded, which decreases the charge taken in therefore volumetric efficiency decreases.

Description : Explain the working of La-mont boiler

Last Answer : La-mont boiler: Working: The La-mont boiler consists Boiler shell, combustion chamber, evaporator, economizer, circulating pump, super heater, and steam drum. This is modern high ... drawn through the super heater. The superheated steam so obtained is then supplied to the prime mover.

Description : Describe the different modes of heat transfer.

Last Answer : Mode of heat transfer:- 1) Conduction 2) Convection 3) Radiation 1) Conduction- It is the mode of heat transfer from one part of substance to another part of same substance or one ... in the form of electromagnetic waves. Example: The heat energy receives from sun to the earth surface. 

Description : Describe the working of Turbojet Engine

Last Answer : Turbojet Engine OR Working :Turbo-jet engine consists of diffuser, compressor, combustion chamber turbine and nozzle. At entrance air diffuser causes rise in pressure in entering air ... and thrust of propulsion is produced. The velocity in the nozzle is grater then flight velocity.

Description : Explain the phases of formation of steam.

Last Answer : Different phases of Formation of steam Consider formation of steam from ice at -200 C i)Solid phase- When the heat is added in ice which is at -20 0C, the temperature of ice increases ... the temperature of steam which is called as superheating and in this region only vapour is present.

Description : List properties of Fuels

Last Answer : Properties of fuels: 1. It should possess high calorific value. 2. It should have proper ignition temperature. The ignition temperature of the fuel should either be neither too low nor too high. 3. It ... moisture content. 9. It should be cheap. 10. It should be easy to handle and transport. 

Description : Give the classification of Fuels.

Last Answer : Give the classification of Fuels.

Description : Enlist conventional and non-conventional energy sources.

Last Answer : Conventional energy source:  1) Coal 2) natural gas 3) oil 4) fire wood. Non-conventional energy sources:  1) Solar power 2) Hydro-electric power 3) Wind power 4) Tidal power 5) Ocean wave power 6) Geothermal power 7) Ocean thermal power 8) Biomass, Bio-fuel etc.

Description : Give the classification of gas turbine

Last Answer : Answer: Classification of gas turbine:  1. According to the path of the working substance: i) Open cycle gas turbine ii) Close cycle gas turbine iii) Semi-closed cycle gas turbine 2. According ... turbine ii) Reaction turbine 5. According to their usage: i) Constant speed ii) Variable speed

Description : List down the uses of compressed air

Last Answer : Application of compressed air:  1. Operating tools in factories 2. Operating drills and hammers in road building 3. Starting diesel engines 4. Operating brakes on buses, trucks and trains 5. Spray painting 6. Excavating 7. To clean the large workshops Etc.

Description : Define free air delivered of compressor

Last Answer : Free Air Delivered (FAD): any two points It is the actual volume of air delivered by the compressor when reduced to NTP. FAD is a flow rate of air derived from measurement at the ... outlet of a compressor, converted back to the actual inlet (free air) conditions before it was compressed.

Description : Define sensible heat and latent heat 

Last Answer : Latent heat: It is defined as the quantity of heat required for phase change of working substance at saturation temperature. OR The amount of heat added at saturation temperature is called latent ... thermometer. OR The amount of heat added up to saturation temperature is called sensible heat.

Description : List different types of ideal gas processes

Last Answer : Following are the different types of ideal gas processes  1. Isochoric (constant volume process) 2. Isobaric (constant pressure process) 3. Isothermal (constant temperature process) 4. Isentropic (constant entropy process) 5. Polytropic process 

Description : Draw dual cycle on P V and T S diagram and write the processes involved in it. 

Last Answer : 1-2 Isentropic compression of air  2-3 the combustion of fuel at constant volume.  3-4 the combustion of fuel at constant pressure  4-5 Isentropic expansion during which work is done by the system.  5-1 Heat rejection at constant volume. 

Description : The unit heat rate characteristic of a thermal power unit shows :  (A) Heat input per kWh of output versus the megawatt output of unit  (B) Heat input per kW of output versus the megawatt output ... hour output of unit  (D) Heat input per kW of output versus the megawatt hour output of unit

Last Answer : The unit heat rate characteristic of a thermal power unit shows : Heat input per kWh of output versus the megawatt output of unit 

Description : Draw a neat labelled diagram of 1-2 shell and tube heat exchanger. 

Last Answer : 1-2 shell and tube heat exchanger: 

Description : Draw block diagram of Dual slope integrating voltmeter and also draw waveform for voltage V/s time. 

Last Answer : Block diagram

Description : With a neat diagram explain the construction of calendria type evaporator.

Last Answer : Calendria type(Short tube) evaporator: Construction: It consists of vertical cylindrical shell incorporating short vertical tube bundle with horizontal tube sheet. Vapour inlet is provided at top ... sheet, while non condensable gas is vented to atmosphere from point near top tube sheet.

Description : Low NOx Combustion Technology Regulation in Japan for Coal Firing Boiler has reduced from 400 ppm to____ a. 100ppm b. 200ppm c. 300ppm d. 400ppm

Last Answer : Ans:- b. 200ppm

Description : Draw the block diagram of regulated power supply, explain function of each block and draw waveforms of each stage.

Last Answer : 1. A step down transformer 2. A rectifier 3. A filter 4. A regulator Operation of Regulated Power Supply:- Step Down Transformer:- A step down transformer will ... regulator. A regulator will maintain the output constant even when changes at the input or any other changes occur.

Description : Draw the block diagram of satellite sub-system and explain power subsystem.

Last Answer : POWER SUBSYSTEM- This system provides the necessary DC power to the satellite. All communication satellites derive their electrical power from solar cells. There is also a battery backup facility used during ... . to d.c. converter is used to raise the level of low voltages to high voltage.

Description : Describe with a neat diagram the working of a simple vapour compression refrigeration system. Represent the cycle on P–V and T–S diagram. 

Last Answer : Vapour compression refrigeration cycle: The vapor-compression uses a circulating liquid refrigerant as the medium which absorbs and removes heat from the space to be cooled and subsequently rejects that heat elsewhere. Figure shows ... the compressor. P-V Diagram T-S diagram: 

Description : Draw the V-I characteristics of power transistor. 

Last Answer : V-I characteristics of power transistor:

Description : Draw P-V diagram of Otto cycle.

Last Answer : P-V diagram of Otto cycle :

Description : Draw P-Q diagram for stages of combustion in SI engine and write stages of combustion with its explanation.

Last Answer : The stages of combustion in S.I. engine: Stage I: Ignition Lag or Preparation Phase: It is a chemical process which depends on-nature of fuel, temperature & pressure, ... The rate of combustion reduces due to surface of the flame front becoming smaller and reduction in turbulence.

Description : Draw P-ⱷ diagram showing stages of combustion in SI engine.

Last Answer : Stages of combustion in SI engines  Stage I: Ignition Lag or Preparation Phase: The time elapsed between the fuel injection into the combustion chamber and starting of combustion. It is the growth ... reduces due to surface of the flame front becoming smaller and reduction in turbulence.   

Description : The efficiency of a dual combustion cycle __________ upon cut-off ratio.  A. depends  B. does not depend

Last Answer : Answer: A

Description : The dual combustion cycle consists of one constant pressure, two constant volume and two isentropic processes.  A. Agree  B. Disagree

Last Answer : Answer: A

Description : Does it change the temperature of the air?

Last Answer : The thermostat turned down . . .“simply adjust how long the air blows” yup that is it. The output “air” temp will be the same from the vents..

Description : Heating question. See details?

Last Answer : The air intake is in the ceiling in the hall in front of our bedroom door. Keeping the door closed added a couple of degrees to the room’s temperature.