Define isothermal efficiency of compressor.

Define isothermal efficiency of compressor.
by

1 Answer

Answer :

Isothermal Efficiency of compressor: It is the ratio of isothermal work (or power) required to drive compressor to the actual work required to drive compressor for the same pressure ratio. Mathematically isothermal efficiency is given as the ratio of isothermal power to shaft or brake power. 

by

Related questions

Explain the factors affecting volumetric efficiency of reciprocating air compressor.

Description : Explain the factors affecting volumetric efficiency of reciprocating air compressor.

Last Answer : Factors affecting volumetric efficiency of reciprocating air compressor: 1) Clearance Volume 2) Restricted passage and leakage at inlet valves 3) Speed of rotation 4) Piston ring leakages ... wall, it get expanded, which decreases the charge taken in therefore volumetric efficiency decreases.

Define free air delivered of compressor

Description : Define free air delivered of compressor

Last Answer : Free Air Delivered (FAD): any two points It is the actual volume of air delivered by the compressor when reduced to NTP. FAD is a flow rate of air derived from measurement at the ... outlet of a compressor, converted back to the actual inlet (free air) conditions before it was compressed.

Represent Isobaric, Isochoric, Isothermal, Adiabatic process on P-V and T-S diagram.

Description : Represent Isobaric, Isochoric, Isothermal, Adiabatic process on P-V and T-S diagram.

Last Answer : Isobaric process Isothermal process Isochoric process Adiabatic process:

State necessity of multistaging and Intercooling of air compressor.

Description : State necessity of multistaging and Intercooling of air compressor.

Last Answer : Necessity of multistaging - For producing high pressure i.e. more than 8 bar, single stage air compressor suffers fallowing drawbacksi) Size of cylinder is too large ii) Rise ... also automatically decreased and volumetric efficiency is also decreases. To avoid this intercooling is necessary.

Differentiate between : (i) Reciprocating and rotary air compressor (ii) Centrifugal and axial flow compressor

Description : Differentiate between : (i) Reciprocating and rotary air compressor (ii) Centrifugal and axial flow compressor

Last Answer : (i) Reciprocating and rotary air compressor: Sr. No. Reciprocating air compressor  Rotary air compressor  1 It is having to and fro motion. It is having rotary ... I.C. engine and for refrigerants and industrial gases. Used universally with large gas turbine. 

Give classification of air compressor.

Description : Give classification of air compressor.

Last Answer : Give classification of air compressor.

Define sensible heat and latent heat

Description : Define sensible heat and latent heat 

Last Answer : Latent heat: It is defined as the quantity of heat required for phase change of working substance at saturation temperature. OR The amount of heat added at saturation temperature is called latent ... thermometer. OR The amount of heat added up to saturation temperature is called sensible heat.

Draw P-V and T-S diagram for isochoric process.

Description : Draw P-V and T-S diagram for isochoric process.

Last Answer : Isochoric Process: 

Explain construction and working of two stage reciprocating air compressors.

Description : Explain construction and working of two stage reciprocating air compressors.

Last Answer : Figure: Two Stage Reciprocating air compressor Construction and Working : It consists of two cylinders (L.P. and H.P.) with water cooled intercooler and air receiver. First of all fresh air is ... (ie second stage) from 3 to 4 is delivered by the compressor at pressure P3 & Temp T4.

Describe construction and working of closed cycled gas turbine.

Description : Describe construction and working of closed cycled gas turbine.

Last Answer : Construction: In above figure shows a closed cycle gas turbine which consists of compressor, heating chamber gas turbine which drives the generator, compressor and a cooling chamber.  ... is cooled at constant pressure with the help of circulating air is circulated through compressor.

Explain the construction and working of Turbo-prop engine.

Description : Explain the construction and working of Turbo-prop engine.

Last Answer : Turboprop Engine: Construction and working: It consists of diffuser, compressor, combustion chamber, turbine, nozzle and propeller. Figure shows a turboprop system employed in aircrafts. Here ... energy of the incoming air (equal to aircraft velocity) into pressure energy by diffuser.

Explain the sources of air leakage in condenser.

Description : Explain the sources of air leakage in condenser.

Last Answer : Sources of air leakage in condenser 1. Air leak through joints and packing. Air leaks into condenser as pressure inside falls below atmospheric pressure. 2. Air also comes in condenser with the steam. ... separated at low pressure in the condenser 4. Air leaks if any bypass seal is broken.

Draw P-V and T-S diagram of dual combustion cycle.

Description : Draw P-V and T-S diagram of dual combustion cycle.

Last Answer : Dual combustion cycle: 1-2 Isentropic compression of air 2-3 the combustion of fuel at constant volume. 3-4 the combustion of fuel at constant pressure 4-5 Isentropic expansion during which work is done by the system. 5-1 Heat rejection at constant volume.

Explain two pass down flow surface condenser with a neat sketch.

Description : Explain two pass down flow surface condenser with a neat sketch.

Last Answer : Two pass down flow surface condenser: It consists of horizontal cast iron cylindrical vessel pack with tubes, through which the cooling water flows. The ends of the condenser are cut off by vertical ... convert into water; therefore whole condensate can be the reused in the boiler. 

(i) Explain construction and working of geothermal power plant. (ii) Explain the construction and working of bomb calorimeter.

Description : (i) Explain construction and working of geothermal power plant. (ii) Explain the construction and working of bomb calorimeter.

Last Answer : (i) Geothermal power plant: Construction and Working: geothermal power plant which consists of the following main components: Underground steam storage, steam separator, steam separator, turbine and Generator. Steam is ... . From the above data the calorific value of the fuel can be found. 

Explain combustion chemistry of carbon, hydrogen and methane.

Description : Explain combustion chemistry of carbon, hydrogen and methane.

Last Answer : Combustion chemistry of carbon, methane and hydrogen: i) Carbon: Burning of carbon to carbon dioxide ( complete combustion )  That means 1 kg of carbon needs 2.67 kg oxygen and produces 3.67 ... equitation 1 kg of hydrogen combines with 8 kg of oxygen to produce 9 kg of steam. 

Compare liquid fuels with solid fuels.

Description : Compare liquid fuels with solid fuels.

Last Answer : S.N. Solid fuel Liquid fuel  1 Require more space for storage. Require less space for storage. 2 Lower calorific value Higher calorific value 3 Difficult control ... ash produced 5 deterioration of the oil in storage Non-deterioration of the oil in storage

Draw and label the gas turbine power plant

Description : Draw and label the gas turbine power plant

Last Answer : OR

Explain working of thermal power plant.

Description : Explain working of thermal power plant.

Last Answer : Working of thermal power plant: In this power plant, coal is used as a fuel for combustion in combustion chamber. After combustion of fuel the heat is generated and this heat is given to the ... by using cooling water and this condensate again used for the boiler with the help of feed pump. 

Draw P-V and T-S diagram for brayton cycle.

Description : Draw P-V and T-S diagram for brayton cycle.

Last Answer : P-V and T-S diagram for brayton cycle.

Explain the working of La-mont boiler

Description : Explain the working of La-mont boiler

Last Answer : La-mont boiler: Working: The La-mont boiler consists Boiler shell, combustion chamber, evaporator, economizer, circulating pump, super heater, and steam drum. This is modern high ... drawn through the super heater. The superheated steam so obtained is then supplied to the prime mover.

Draw neat and labeled sketch of three pass packages type boiler.

Description : Draw neat and labeled sketch of three pass packages type boiler. 

Last Answer : Each set of tubes that hot combustion flue gas travels through before making a turn within the boiler, is considered a "pass." A 3-pass fire tube boiler design consists of three sets of ... design that allows more heat transfer time to deliver the same or higher efficiency rating. 

Describe the different modes of heat transfer.

Description : Describe the different modes of heat transfer.

Last Answer : Mode of heat transfer:- 1) Conduction 2) Convection 3) Radiation 1) Conduction- It is the mode of heat transfer from one part of substance to another part of same substance or one ... in the form of electromagnetic waves. Example: The heat energy receives from sun to the earth surface. 

Explain Otto cycle with P-V and T-S diagram.

Description : Explain Otto cycle with P-V and T-S diagram.

Last Answer : This cycle is so named as it was conceived by Otto'. On this cycle, petrol, gas and many types of oil engines work. It is the standard of comparison for internal combustion engines. Figs. ... 4-1 shows the rejection of heat by air at constant volume till original state (point 1) reaches.

Describe the working of Turbojet Engine

Description : Describe the working of Turbojet Engine

Last Answer : Turbojet Engine OR Working :Turbo-jet engine consists of diffuser, compressor, combustion chamber turbine and nozzle. At entrance air diffuser causes rise in pressure in entering air ... and thrust of propulsion is produced. The velocity in the nozzle is grater then flight velocity.

Explain the phases of formation of steam.

Description : Explain the phases of formation of steam.

Last Answer : Different phases of Formation of steam Consider formation of steam from ice at -200 C i)Solid phase- When the heat is added in ice which is at -20 0C, the temperature of ice increases ... the temperature of steam which is called as superheating and in this region only vapour is present.

List properties of Fuels

Description : List properties of Fuels

Last Answer : Properties of fuels: 1. It should possess high calorific value. 2. It should have proper ignition temperature. The ignition temperature of the fuel should either be neither too low nor too high. 3. It ... moisture content. 9. It should be cheap. 10. It should be easy to handle and transport. 

Give the classification of Fuels.

Description : Give the classification of Fuels.

Last Answer : Give the classification of Fuels.

Enlist conventional and non-conventional energy sources.

Description : Enlist conventional and non-conventional energy sources.

Last Answer : Conventional energy source:  1) Coal 2) natural gas 3) oil 4) fire wood. Non-conventional energy sources:  1) Solar power 2) Hydro-electric power 3) Wind power 4) Tidal power 5) Ocean wave power 6) Geothermal power 7) Ocean thermal power 8) Biomass, Bio-fuel etc.

Give the classification of gas turbine

Description : Give the classification of gas turbine

Last Answer : Answer: Classification of gas turbine:  1. According to the path of the working substance: i) Open cycle gas turbine ii) Close cycle gas turbine iii) Semi-closed cycle gas turbine 2. According ... turbine ii) Reaction turbine 5. According to their usage: i) Constant speed ii) Variable speed

List down the uses of compressed air

Description : List down the uses of compressed air

Last Answer : Application of compressed air:  1. Operating tools in factories 2. Operating drills and hammers in road building 3. Starting diesel engines 4. Operating brakes on buses, trucks and trains 5. Spray painting 6. Excavating 7. To clean the large workshops Etc.

List different types of ideal gas processes

Description : List different types of ideal gas processes

Last Answer : Following are the different types of ideal gas processes  1. Isochoric (constant volume process) 2. Isobaric (constant pressure process) 3. Isothermal (constant temperature process) 4. Isentropic (constant entropy process) 5. Polytropic process 

The unit heat rate characteristic of a thermal power unit shows :

Description : The unit heat rate characteristic of a thermal power unit shows :  (A) Heat input per kWh of output versus the megawatt output of unit  (B) Heat input per kW of output versus the megawatt output ... hour output of unit  (D) Heat input per kW of output versus the megawatt hour output of unit

Last Answer : The unit heat rate characteristic of a thermal power unit shows : Heat input per kWh of output versus the megawatt output of unit 

Define (i) I.P (ii) B.P (iii)Volumetric efficiency (iv)Isothermal efficiency of air compressor

Description : Define (i) I.P (ii) B.P (iii)Volumetric efficiency (iv)Isothermal efficiency of air compressor

Last Answer : i) I.P. - It is the ratio of polytrophic work into speed of compressor in revolution per second.   ii) B.P. - It is the power required to drive the compressor or power delivered to ... the ratio of isothermal power to the shaft power or brake power of motor required to drive the compressor  

The ratio of indicated power to shaft power of the engine required to drive the compressor is called A. Compressor efficiency B. Volumetric efficiency C. Isothermal efficiency D. Mechanical efficiency

Description : The ratio of indicated power to shaft power of the engine required to drive the compressor is called A. Compressor efficiency B. Volumetric efficiency C. Isothermal efficiency D. Mechanical efficiency

Last Answer : ANSWER : D

The clearance volume of the air compressor is kept minimum because A. It allows maximum compression to be achieved B. It greatly affects volumetric efficiency C. It results in minimum work D. It permits isothermal compression

Description : The clearance volume of the air compressor is kept minimum because A. It allows maximum compression to be achieved B. It greatly affects volumetric efficiency C. It results in minimum work D. It permits isothermal compression

Last Answer : ANSWER : B

The ratio of isothermal power to actual measured input power of a compressor is known as: a) Isothermal efficiency b) Volumetric Efficiency c) Barometric efficiency d) None

Description : The ratio of isothermal power to actual measured input power of a compressor is known as: a) Isothermal efficiency b) Volumetric Efficiency c) Barometric efficiency d) None 

Last Answer : a) Isothermal efficiency

What is isolation efficiency?

Description : What is isolation efficiency?

Last Answer : Isolation efficiency is the percent of vibration force or motion that is not transmitted through the vibration mount.

Define the following terms : (i) absorptivity (ii) reflectivity (iii) transmissivity (iv) emissivity

Description : Define the following terms : (i) absorptivity (ii) reflectivity (iii) transmissivity (iv) emissivity

Last Answer : Absorptivity: It is the fraction of total incident radiation which is absorbed by a body. Reflectivity: It is the fraction of total incident radiation which is reflected by a body.  Transmissivity: It ... total emissive power of a body to emissive power of a black body at the same temperature. 

Define capacity and economy of evaporator.

Description : Define capacity and economy of evaporator.

Last Answer : The capacity of an evaporator is defined as the number of kilogram of water evaporated per hour. The economy of an evaporator is defined as the number of kilogram of water evaporated per kilogram of steam fed to the evaporator.

Define radiation and give one example.

Description : Define radiation and give one example.

Last Answer : Radiation: Radiation is transfer of energy through space by electromagnetic waves. If radiation is passing through empty space, it is not transformed into other forms of energy, nor is it diverted from its ... only the absorbed energy that appears as heat. Example: Loss of heat from unlagged pipe. 

Define film heat transfer coefficient.

Description : Define film heat transfer coefficient.

Last Answer : Film heat transfer coefficient: Film heat transfer coefficient h is defined as the quantity of heat transferred in unit time through unit area at a temperature difference of 10 between the surface and surrounding.

Define steady state heat transfer.

Description : Define steady state heat transfer.

Last Answer : Steady state heat transfer: Heat transfer where temperature remains same with respect to time and the rate of heat transfer does not vary with time.

Does it change the temperature of the air?

Description : Does it change the temperature of the air?

Last Answer : The thermostat turned down . . .“simply adjust how long the air blows” yup that is it. The output “air” temp will be the same from the vents..

Heating question. See details?

Description : Heating question. See details?

Last Answer : The air intake is in the ceiling in the hall in front of our bedroom door. Keeping the door closed added a couple of degrees to the room’s temperature.

Is it ok to walk downtown with my umbrella open to block the heat from the sun?

Description : Is it ok to walk downtown with my umbrella open to block the heat from the sun?

Last Answer : I don’t see why it wouldn’t be. I saw a news article this morning about the heat wave that showed numerous people doing that. That’s a perfectly valid function of a portable umbrella even if it’s less common nowadays than it used to be.

Can you help me figure out what this figure is in this video of an explosion that happened in our city today?

Description : Can you help me figure out what this figure is in this video of an explosion that happened in our city today?

Last Answer : I tried to view it frame by frame but did not see the object. That looks like an oil filled transformer got too hot and blew up.

Does too much broiling wear out a broiling pan? Does too much baking wear out a cookie sheet?

Description : Does too much broiling wear out a broiling pan? Does too much baking wear out a cookie sheet?

Last Answer : Bakeware fatigue?

How do you beat the heat without AC?

Description : How do you beat the heat without AC?

Last Answer : Taking a cold shower about every hour, putting on thin cotton clothes while still wet. Or taking a cool shower with my clothes on. The dampness catches every little whisper of a breeze that comes through.