Which of the following Unit can be used to measure the speed of a computer? A. BAUD B. SYPS C. MIPS D. None of the Above

Which of the following Unit can be used to measure the speed of a computer? A. BAUD B. SYPS  C. MIPS D. None of the Above
by

1 Answer

Answer :

C. MIPS
by
selected

Related questions

Processor’s speed of a computer is measured in (1) BPS (2) MIPS (3) Baud (4) Hertz

Description : Processor’s speed of a computer is measured in (1) BPS (2) MIPS (3) Baud (4) Hertz

Last Answer : Million instructions per second (MIPS)

What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second ) Baud

Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) BaudC) Bits per second D) Both B and C

Last Answer : B) Baud

CPU speed of a personal computer is A) 32 KIPS B) 100 KIPS C) 1 MIPS D) None of these

Description : CPU speed of a personal computer is A) 32 KIPS B) 100 KIPS C) 1 MIPS D) None of these

Last Answer : Answer : B

CPU speed of a personal computer is- 1) 32 KIPS 2) 100 KIPS 3) 1 MIPS 4) None of these

Description : CPU speed of a personal computer is- 1) 32 KIPS 2) 100 KIPS 3) 1 MIPS 4) None of these

Last Answer : 2) 100 KIPS

What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C

Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C

Last Answer : B) Baud

A term associated with the comparison of processing speed is 1) FFTS 2) MPG 3) MIPS 4) CPS

Description : A term associated with the comparison of processing speed is 1) FFTS 2) MPG 3) MIPS 4) CPS

Last Answer : 3) MIPS

A term associated with the comparison of processing speeds of different computer system is: A) EFTS B) MPG C) MIPS D) CPS

Description : A term associated with the comparison of processing speeds of different computer system is: A) EFTS B) MPG C) MIPS D) CPS

Last Answer : Answer : C

A term associated with the comparison of processing speeds of different computer systems is: a) EFTS b) MPG c) MIPS d) None of The Above

Description : A term associated with the comparison of processing speeds of different computer systems is: a) EFTS b) MPG c) MIPS d) None of The Above

Last Answer : c) MIPS

The baud rate of a signal is 600 baud/second. If each signal unit carries 6 bits, then the bit rate of a signal is ................. (A) 3600 (B) 100 (C) 6/600 (D) None of the above

Description : The baud rate of a signal is 600 baud/second. If each signal unit carries 6 bits, then the bit rate of a signal is ................. (A) 3600 (B) 100 (C) 6/600 (D) None of the above

Last Answer : (A) 3600 

An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & 1000 bps (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Description : An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & ... (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Last Answer : (D) 1000 bauds \ sec & 4000 bps Explanation: Bit rate is the number of bits per second. Baud rate is the number of signal units per second. Baud rate is less than or equal to the bit rate. Baud rate = 1000 bauds per second (baud/s) Bit rate = 1000 x 4 = 4000 bps

A term associated with the comparison of processing speeds of different computer system is: a. EFTS b. MPG c. MIPS d. CPS

Description : A term associated with the comparison of processing speeds of different computer system is: a. EFTS b. MPG c. MIPS d. CPS

Last Answer : MIPS

A term associated with the comparison of processing speeds of different computer system is: a. EFTS b. MPG c. MIPS d. CFPS

Description : A term associated with the comparison of processing speeds of different computer system is: a. EFTS b. MPG c. MIPS d. CFPS

Last Answer : c. MIPS

A term associated with the comparison of processing speeds of different computer system is: a. EFTS b. MPG c. MIPS d. CPS

Description : A term associated with the comparison of processing speeds of different computer system is: a. EFTS b. MPG c. MIPS d. CPS

Last Answer : c. MIPS

A term associated with the comparison of processing speeds of different computer system is: a. EFTS b. MPG c. MIPS d. CFPS

Description : A term associated with the comparison of processing speeds of different computer system is: a. EFTS b. MPG c. MIPS d. CFPS

Last Answer : c. MIPS

What is the unit Kips used to measure speed ?

Description : What is the unit Kips used to measure speed ?

Last Answer : The unit is used to measure the speed of the Kips processor.

Which Unit is used to measure the speed of a printer? A. DPI B. CPM C. PPM D. None of the Above

Description : Which Unit is used to measure the speed of a printer? A. DPI B. CPM C. PPM D. None of the Above

Last Answer : C. PPM

The unit KIPS is used to measure the speed of: a) Processor b) Disk drive c) Printer d) Tape drive e) None of these

Description : The unit KIPS is used to measure the speed of: a) Processor b) Disk drive c) Printer d) Tape drive e) None of these

Last Answer : a) Processor

The unit of KIPS is used to measure the speed of________ 1) Processor 2) Disk Drive 3) Printer 4) Tape Drive

Description : The unit of KIPS is used to measure the speed of________ 1) Processor 2) Disk Drive 3) Printer 4) Tape Drive

Last Answer : 1) Processor

What is the full form of MIPS ?

Last Answer : MIPS - Million Instructions per Second

which are of the following modern assemblers: a. MIPS b. Sun SPARC c. HP PA-RISC d, x86(x64) e. all of these

Description : which are of the following modern assemblers: a. MIPS b. Sun SPARC c. HP PA-RISC d, x86(x64) e. all of these

Last Answer : e. all of these

Full form of MIPS assembler is: a. Microprocessor without interlocked pipeline stage b. Microprocessor with interlocked pipeline stage c. Botha &b d. None of these

Description : Full form of MIPS assembler is: a. Microprocessor without interlocked pipeline stage b. Microprocessor with interlocked pipeline stage c. Botha &b d. None of these

Last Answer : a. Microprocessor without interlocked pipeline stage

Which is most commonly measured in terms of MIPS previously million instruction per second: a. Microprocessor b. Performance of a microprocessor c. Assembly line d. None of thes

Description : Which is most commonly measured in terms of MIPS previously million instruction per second: a. Microprocessor b. Performance of a microprocessor c. Assembly line d. None of thes

Last Answer : b. Performance of a microprocessor

What are the five steps in MIPS instruction execution?

Description : What are the five steps in MIPS instruction execution?

Last Answer : 1. Fetch instruction from memory. 2. Read registers while decoding the instruction. The regular format of MIPS instructions allows reading and decoding to occur simultaneously. 3. Execute the operation or calculate an address. 4. Access an operand in data memory. 5. Write the result into a register.

What are the floating point instructions in MIPS?

Description : What are the floating point instructions in MIPS?

Last Answer : MIPS supports the IEEE 754 single precision and double precision formats with these instructions: Floating-point addition Floating-point subtraction Floating-point multiplication Floating-point division Floating-point comparison Floating-point branch

What is the baud rate in Arduino?

Description : What is the baud rate in Arduino?

Last Answer : The baud rate in Arduino is the speed at which data is transmitted over a serial port, measured in bits per second (bps).

Is the total useful information processed or communicated over a specific amount of time A. Baud rate B. Bit rate C. Information theory D. Throughput

Description : Is the total useful information processed or communicated over a specific amount of time A. Baud rate B. Bit rate C. Information theory D. Throughput

Last Answer : D. Throughput

In Manchester anddifferential Manchester encoding, the transition at the middle of the bit is usedfor __________. A) bit transfer B) baud transfer C) synchronization D) none of the above

Description : In Manchester anddifferential Manchester encoding, the transition at the middle of the bit is usedfor __________. A) bit transfer B) baud transfer C) synchronization D) none of the above

Last Answer : synchronization

The data rate is sometimes calledthe ___ rate. A) baud B) bit C) signal D) none of the above

Description : The data rate is sometimes calledthe ___ rate. A) baud B) bit C) signal D) none of the above

Last Answer : bit

The signal rate is sometimes called the ____ rate. A) baud B) bit C) signal D) none of the above

Description : The signal rate is sometimes called the ____ rate. A) baud B) bit C) signal D) none of the above

Last Answer : baud

The ________ rate defines thenumber of dataelements sent in1s; the______ rate is the numberof signalelements sent in 1s. A) data; signal B) signal; data C) baud; bit D) none of the above

Description : The ________ rate defines thenumber of dataelements sent in1s; the______ rate is the numberof signalelements sent in 1s. A) data; signal B) signal; data C) baud; bit D) none of the above

Last Answer : data; signal

How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above

Description : In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above

Last Answer : a. Half the baud rate.

Define baud.

Description : Define baud.

Last Answer : A unit of modulation rate.

In serial communication modes, mode 1 the Baud rate = a) BR=2SMOD/32 * (Timer 0 over flow rate) b) BR=2SMOD/16 * (Timer 1 over flow rate) c) BR=2SMOD/16 * (Timer 0 over flow rate) d) BR=2SMOD/32 * (Timer 1 over flow rate)

Description : In serial communication modes, mode 1 the Baud rate = a) BR=2SMOD/32 * (Timer 0 over flow rate) b) BR=2SMOD/16 * (Timer 1 over flow rate) c) BR=2SMOD/16 * (Timer 0 over flow rate) d) BR=2SMOD/32 * (Timer 1 over flow rate)

Last Answer : b) BR=2SMOD/16 * (Timer 1 over flow rate)

What is the baud rate of the standard 10 Mbps Ethernet ? (A) 10 megabaud (B) 20 megabaud (C) 30 megabaud (D) 40 megabaud

Description : What is the baud rate of the standard 10 Mbps Ethernet ? (A) 10 megabaud (B) 20 megabaud (C) 30 megabaud (D) 40 megabaud

Last Answer : (B) 20 megabaud

An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above

Description : An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above

Last Answer : (B) 3 bits/baud

Define (i)Bit rate (ii)Baud rate

Description : Define (i)Bit rate (ii)Baud rate

Last Answer : (i)Bit rate :- Bit rate is simply the number of bits transmitted during one second and is expressed in bits per second (bps). Mathematically bit rate is given by:- Rb =1 / Tb where Tb is time ... 1 / Ts Where, baud rate = symbol rate (symbols per second) and Ts = time interval of one symbol.

What is Baud ?

Description : What is Baud ?

Last Answer : Baud is the signaling rate, or rate of state transitions, on a communications medium. One baud corresponds to one transition per second.

Knot is a measure of – (1) Unit of speed (2) the curvature of spherical objects (3) solar radiation (4) intensiry of earthquake shock

Description : Knot is a measure of – (1) Unit of speed (2) the curvature of spherical objects (3) solar radiation (4) intensiry of earthquake shock

Last Answer : (1) Unit of speed Explanation: The Knot is a unit of speed equal to one nautical mile per hour. The ISO standerd symbol for the knot is Kn.

Software in computer A) Enhances the capabilities of the hardware machine B) Increase the speed of central processing unit C) Both of above D) None of above

Description : Software in computer A) Enhances the capabilities of the hardware machine B) Increase the speed of central processing unit C) Both of above D) None of above

Last Answer : Answer : A

What is the commonly used unit for measuring the speed of data transmission ? (1) Mega Hertz (2) Characters per second (3) Bits per second (4) Nano seconds

Description : What is the commonly used unit for measuring the speed of data transmission ? (1) Mega Hertz (2) Characters per second (3) Bits per second (4) Nano seconds

Last Answer : Bits per second