This group of alumino-silicate minerals is widely used in making electrical insulators (1) Bauxite (2) Chrornite (3) Manganese (4) Mica

1 Answer

Answer :

(4) Mica Explanation: Sheet mica is used principally in the electronic and electrical industries. Its usefulness in these applications is derived from its unique electrical and thermal insulating properties and its mechanical properties, which allow it to be cut, punched, stamped, and machined to close tolerances. Specifically, Mica is unusual in that it is a good electrical insulator at the same time as being a good thermal conductor.

Related questions

Description : This group of alumino-silicate minerals is widely used in making electrical insulators (1) Bauxite (2) Chromite (3) Manganese (4) Mica

Last Answer : Mica

Description : The Vindhyan system of rocks is important for the production of [CDS 2011] (a) precious stones and building materials (b) iron ore and manganese (c) bauxite and mica (d) copper and uranium

Last Answer : Ans: (a)

Description : Which one of the following minerals is found in pure form? (1) Iron (2) Copper (3) Bauxite (4) Manganese

Last Answer : (2) Copper Explanation: Copper is one of very few elements that are found in essentially pure form in nature. But the bulk of the copper resource is found in other minerals.

Description : Which one of the following minerals is found in pure form? (1) Iron (2) Copper (3) Bauxite (4) Manganese

Last Answer : Copper

Description : Hydration of cement is due to chemical action of water with (A) Tricalcium silicate and dicalcium silicate (B) Dicalcium silicate and tricalcium aluminate (C) Tricalcium aluminate and tricalcium alumino ferrite (D) All the above

Last Answer : Answer: Option D

Description : The compound of Portland cement which reacts immediately with water and also sets first is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

Description : Initial setting of cement is caused due to (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

Description : The compound of Portland cement which contributes to the strength after two to three years is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra-calcium alumino ferrite

Last Answer : Answer: Option B

Description : Pick up the compound responsible for early strength of cement from the following: (A) Tetra-calcium alumino-ferrite (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Di-calcium silicate

Last Answer : Answer: Option B

Description : Good quality cement contains higher percentage of (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option A

Description : Ultimate strength to cement is provided by (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option B

Description : Rapid hardening cement contains (A) Tri-calcium silicate (B) Tri-calcium aluminate (C) Tetra-calcium alumino-ferrite (D) Di-calcium silicate

Last Answer : Answer: Option A

Description : In the cement the compound quickest to react with water, is (A) Tri-calcium aluminate (B) Tetra-calcium alumino-ferrite (C) Tri-calcium silicate (D) Di-calcium silicate

Last Answer : Answer: Option A

Description : The constituent of cement which is responsible for all the undesirable properties of cement is (A) Di-calcium silicate (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

Description : The presence of alkali oxides in alumino silicate ceramics is likely to result in dielectric breakdown due to   (A) Polarization (B) Conductivity (C) Structural homogeneties (D) Ionization

Last Answer : The presence of alkali oxides in alumino silicate ceramics is likely to result in dielectric breakdown due to Conductivity 

Description : Which of the following is false? (a) Mica is usually found in metamorphic and igneous rocks (b) Aluminium has the advantage over iron as it is resistant to corrosion (c) line is mostly used in galvanising iron and steel goods (d) Manganese is largely used in making fertilizers

Last Answer : Ans: (d)

Description : Czochralski method is widely used for the growth of crystal of -------------materials. a) Conductors b) semiconductors c) insulator d) conductors & insulators

Last Answer : b) semiconductors

Description : Which of the listed pairs of materials make the best insulators? A. copper and aluminum B. glass and mica C. dry air and a vacuum D. doped silicon and germanium

Last Answer : Answer: B

Description : The metal extracted from Bauxite is : (1) Silver (2) Copper (3) Manganese (4) Aluminum

Last Answer : Aluminum

Description : Micanite is a form of (A) Built up mica. (B) Hydrated potassium aluminium silicate. (C) Magnesium mica. (D) Calcium mica.

Last Answer : (A) Built up mica.

Description : Bauxite is the ore of (a) Aluminium (b) Copper (c) Zinc (d) Mica

Last Answer : Ans: (a)

Description : Match the following: [NDA 2011] Mineral State A. Bauxite 1. Andhra Pradesh B. Mica 2. Orissa C. Copper 3. Madhya Pradesh D. Zinc 4. Rajasthan A B C D (a) 4 1 3 2 (b) 2 1 3 4 (c) 4 3 1 2 (d) 2 3 1 4

Last Answer : Ans: (b)

Description : What is Khetri in Rajasthan famous for? (1) Copper mines (2) Mica mines (3) Bauxite mines (4) Limestone mines

Last Answer : (1) Copper mines Explanation: Kheiri is a town in Jhunjhunu district of Rajasthan. It s situated at the foothills of the Aravalli Range, which hosts copper mineralization, giving rise to a ... province from Singhana in the north to Raghunathgarh in the south, popularly known as Khetri Copper Belt.

Description : India has the monopoly in the International market in the supply of– (1) Iron (2) Mica (3) Bauxite (4) Copper

Last Answer : (2) Mica Explanation: India produces approximate 90 % of the world's mica. It is an indispensable component of the electrical industry. India accounts for 60 % of mica embarking in international trade.

Description : Which of the following minerals is a source of iro w) Bauxite (pron: box-ite) x) Hematite (pron: he-ma-tite) y) Malachite (pron: mal-ah-kite) z) Galena (pron: ga-lee-nah)

Last Answer : ANSWER: X -- HEMATITE

Description : Match the following: [IAS 2007] Mineral Place A. Mica 1. Chindwara B. Diamond 2. Bellary C. Manganese 3. Panna D. Copper 4. Hazaribagh A B C D (a) 1 2 3 4 (b) 1 3 2 4 (c) 4 3 2 1 (d) 4 2 3 1

Last Answer : Ans: (c)

Description : In the world, India tops in the production of – (1) Nickel (2) Uranium (3) Mica (4) Manganese

Last Answer : (3) Mica Explanation: Mica is produced in huge proportion in India. In fact, India is one of the leading suppliers of mica to the world. India alone accounts fora major portion ... indispensable component of the electrical industry. India accounts for 60 % of mica embarking in international trade.

Description : India leads the world in the export of – (1) coffee (2) cotton (3) manganese (4) mica

Last Answer : (4) mica Explanation: India is one of the leading suppliers of mica to the world. India alone accounts fora major portion of the world's export of block mica and mica splitting. India produces approximate 90 % of the world's mica.

Description : Which of the following is a non-metallic mineral? (a) Bauxite (b) Magnesium (c) Gypsum (d) Manganese

Last Answer : Ans: (c)

Description : Which one of the following is a non-metallic mineral? A. Manganese B. Magnesium C. Gypsum (Answer) D. Bauxite E. None of these

Last Answer : C. Gypsum (Answer)

Description : __________ is used as a flux in the extraction of iron from iron ore (haematite) in blast furnace. (A) Bauxite (B) Limestone (C) Quartz (D) Manganese

Last Answer : (B) Limestone

Description : The example of 2 : 1 type silicate clay minerals are

Last Answer : Ans. Montmorillonite, Vermiculite and Illite

Description : Which of the following silicate minerals are formed by parallel sheets of silicate tetrahedra with Si2O5 or a 2:5 ratio? [a] Ortho silicate [b] Neo Silicate [c] Phyllosilicate [d] Sheet silicate [e] Both 3 & 4

Last Answer : [e] Both 3 & 4

Description : Which of the following is not considered a physical property of minerals? A) silicate structure B) streak C) hardness D) luster

Last Answer : silicate structure

Description : Which of the following minerals is NOT a silicate? w) orthoclase x) muscovite y) augite (pron: aw-jIt) z) magnetite

Last Answer : ANSWER: Z -- MAGNETITE

Description : How is mica one of the most indispensible minerals ? Explain any three points. -SST 10th

Last Answer : In electric and electronic industries it is an indispensible minerals. (i) It has excellent di-electric strength. (ii) Low power loss factors. (iii) Insulating properties and resistance to high voltage.

Description : What are non-metallic minerals? Write a short note on uses of mica and its distribution in India. -SST 10th

Last Answer : Minerals which do not contain metals or do not have metallic properties are called non-metallic minerals. For example, mica, limestone, salt, potash, sulphur,granite, marble, sandstone, etc. Uses ... is around Ajmer. Nellore mica belt of Andhra Pradesh is also an important producer in the country.

Description : What does the minerals talcmuscovite mica quartz and olivine?

Last Answer : Feel Free to Answer

Description : Based on the following rocks and minerals, select the correct statement, quartz, shale, basalt, granite, marble, gypsum, mica (A) Basalt and marble are the only metamorphic rocks (B) There is no sedimentary rock (C) Granite is the only igneous rock (D) Quartz and mica are minerals

Last Answer : Answer: Option D

Description : Processing of which minerals release huge amount of dust in the atmosphere? 1 a) Sandstone b) Iron ore c) Limestone d) Bauxite 15. -Geography

Last Answer : C) Limestone

Description : Which of the following minerals are found in a natural way in the State of Chhattisgarh ? 1. Bauxite 2. Dolomite 3. Iron ore 4. Tin Select the correct answer using the code given below : [IAS 2008] (a) 1, 2 and 3 only (b) 1 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4

Last Answer : Ans: (d)

Description : Which of the following minerals is a source of lead? w) Bauxite x) Hematite y) Malachite z) Galena

Last Answer : ANSWER: Z -- GALENA

Description : Which of the following minerals is a source of copper? w) Bauxite (pron: box-ite) x) Hematite y) Malachite z) Galena

Last Answer : ANSWER: Y -- MALACHITE

Description : Match the following: Minerals Location A. Coal 1. Giridih B. Copper 2. Jayamkondam C. Manganese 3. Alwar D. Lignite 4. Dharwar A B C D (a) 1 4 3 2 (b) 2 3 4 1 (c) 1 3 4 2 (d) 2 4 3 1

Last Answer : Ans: (a)

Description : Which of the following minerals are required for smelting iron ore? (1) Limestone and gypsum (2) Manganese and limestone (3) Limestone and coal (4) Gypsum and coal

Last Answer : (2) Manganese and limestone Explanation: Composite volcanoes are most commonly found in island arcs. Most of them are found scattered on the islands adjoining the Pacific Ring of Fire where ... region of high volcanic and seismic activity that surrounds the majority of the Pacific Ocean Basin.

Description : Minerals known to be required in large amounts for plant growth include (a) potassium, phosphorus, selenium, boron (b) magnesium, sulphur, iron, zinc (c) phosphorus, potassium, sulphur, calcium (d) calcium, magnesium, manganese, copper.

Last Answer : (c) phosphorus, potassium, sulphur, calcium

Description : Which of the following minerals are required for smelting iron ore? (1) Limestone and gypsum (2) Manganese and limestone (3) Limestone and coal (4) Gypsum and coal

Last Answer :  Manganese and limestone

Description : Insulators perform which of the following functions? a) Conduction b) Convection c) Provide electrical insulation d) Allows current leakage at interfaces

Last Answer : c) Provide electrical insulation

Description : Name three electrical conductors and three electrical insulators.

Last Answer : Ans: conductors: metals, graphite, carbon insulators: glass, rubber, wood 

Description : Why is mica used in the electrical and electronic industry? -Geography

Last Answer : Mica has insulating properties which can withstand high voltage and has low power loss factor. This has made mica useful in the electrical and electronic industry.