In electro-refining, the pure metal is deposited on – (1) vessel (2) electrolyte (3) cathode (4) anode

1 Answer

Answer :

(3) cathode Explanation: In electro-refining, the anodes consist of unrefined impure metal, and as the current passes through the acidic electrolyte the anodes are corroded into the solution so that the electroplating process deposits refined pure metal onto the cathodes. Electrolytic refining is used to extract impurities from crude metals.

Related questions

Description : In electro-refining, the pure metal is deposited on (1) vessel (2) electrolyte (3) cathode (4) anode

Last Answer : cathode

Description : Identify the correct statement with reference to the extractive metallurgy of aluminium. (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3 (B) Approximately 80% of ... is immediately vaporised (D) Anode effect sets in when the cryolite concentration goes below 40%.

Last Answer : (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3

Description : (3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be ... on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Last Answer : Which of the following is not a method of preparing oxygen? (1) Electrolysis of water (2) Fractional distillation of liquid air (3) Decomposition of potassium permanganate (4) Decomposition of manganese dioxide

Description : During electro refining, Pure Metal is collected at

Last Answer : Cathode

Description : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. Coke powder is spreadded over the molten electro

Last Answer : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. ... of molten aluminium by air D. (a) both (b)

Description : When a spoon is to be electroplated with nickel the spoon is (1) dipped in a nickel sulphate solution (2) made anode and a pure nickel rod, the cathode (3) made cathode and a pure nickel red, the anode (4) coated with nickel sulphate and dried

Last Answer : made cathode and a pure nickel red, the anode

Description : Corrosion of a metal occurs at the (a) Anode (b) Cathode (c) Both anode and cathode (d) None of the above

Last Answer : Ans:(a)

Description : Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than ... coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Last Answer : (D) Calorising is the process of coating steel with chromium

Description : Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at eathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.

Last Answer : (1) Copper at eathode and oxygen at anode. Explanation: Copper is deposited at the cathode and is dissolved at the anode. Consequently the concentration of copper ions in solution remains constant. This can be used as a method of purification of copper as only pure copper is deposited at the cathode

Description : In the common dry cell, the zinc atoms are: w) reduced at the cathode x) oxidized at the cathode y) oxidized at the anode z) reduced at the anode

Last Answer : ANSWER: Y -- OXIDIZED AT THE ANODE

Description : Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at cathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.

Last Answer : Copper at cathode and oxygen at anode.

Description : Which of the following common element(s) is/are present in the anode mud in elctrolytic refining of copper ?

Last Answer : Which of the following common element(s) is/are present in the anode mud in elctrolytic refining of ... A. Selenium B. Tellurium C. Silver D. Gold

Description : Metals of high purity are obtained by zone refining. Impurities are more soluble in melt in pure metal.

Last Answer : Metals of high purity are obtained by zone refining. Impurities are more soluble in melt in pure ... Statement-1 is false but Statement -2 is true

Description : Sacrificial anode method is used in the protection of pipelines which are buried underground. Sacrificial anode (A) Occurs higher in the electro-chemical series of metals (B) Is exemplified by magnesium plate (C) ... cathodic base material to be guarded against corrosion (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Description : Explain electro-refining of blister copper: 

Last Answer : 1. It is carried out in the large lead lined tank. 2. Impure Copper is placed into large plates which are suspended into tank at intervals & acts as anode. 3. Cathodes are thin plates of pure ... pure copper is deposited on the cathodes. 7. Electro - refined copper is about 99.99% pure.

Description : The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the ... reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Last Answer : Answer: D

Description : The device in figure 'B' shown in the illustration will conduct when the ____________. EL-0067 A. base-emitter is forward biased and the collector-base is reverse biased B. anode-cathode is forward ... is reversed biased D. terminal 1-2 is forward biased and the emitter-terminal 1 is reverse biased

Last Answer : Answer: B

Description : The leads of the device in figure 'B' shown in the illustration are named _________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: A

Description : Leads on the device in figure 'B' shown in the illustration are named ____________. EL-0067 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: D

Description : Which of the following statements comparing transistors and vacuum tubes is correct? A. Both transistors and vacuum tubes have a cathode that must be heated to give off electrons. B. A vacuum tube must ... flow. D. The anode of both transistors and vacuum tubes must be heated to give off electrons.

Last Answer : Answer: B

Description : The leads of the device in figure 'A' shown in the illustration are named the _______________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: C

Description : The input signal of a travelling wave tube is introduced at A. Cathode B. Anode C. Cathode end of the helix D. Collector end of the helix

Last Answer : C. Cathode end of the helix

Description : Caustic soda is produced in a mercury cell having anode and cathode made respectively of moving mercury and (A) Moving mercury and graphite (B) Graphite and moving mercury (C) Moving mercury and carbon (D) Moving mercury and crimped steel wire

Last Answer : (B) Graphite and moving mercury

Description : A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent ... . 40 m/s d. 67.5 m/s e. This cannot be determined from the information given

Last Answer : 30 m/s

Description : What products do we get on electrolysis of saturated brine using steel cathode and graphite anode in an electrolytic cell? (A) Cl2 & Na (B) Cl2 & H2 (C) O2 & H2 (D) Cl2 , H2 & NaOH solution

Last Answer : (D) Cl2 , H2 & NaOH solution

Description : Pick out the wrong statement. (A) The X-rays cannot be deflected by electric field unlike cathode rays (B) The intensity of X-rays can be measured by ionisation current produced due to the ... the anode-cathode voltage (D) Crystal structure of a material can be studied by an electron microscope

Last Answer : (C) The quality of X-rays can be controlled by varying the anode-cathode voltage

Description : Inverter cell anode and cathode of the…………. cell is used for vehicle (a) Copper electrode zinc (b)Zinc copper (c) Aluminium zinc (d)Nickel Cobalt

Last Answer : (a) Copper electrode zinc

Description : Define cathode and anode.

Last Answer : Cathode: The electrode which is connected to the negative terminal (pole) of a battery is called as cathode. It is a negative electrode.  Anode: The electrode which is connected to the positive terminal (pole) of a battery is called as anode. It is a positive electrode. 

Description : It is an unidirectional device that blocks the current flow from cathode to anode   (A) SCR (B) PCR (C) VCR (D) DCR

Last Answer : It is an unidirectional device that blocks the current flow from cathode to anode SCR 

Description : What is the difference between an anode and a cathode?

Last Answer : The anode is positively charged electrode and the cathode is negatively charged electrode.

Description : Do electrons flow from the anode to the cathode?

Last Answer : electrons flow from cathode to anode because the electron has a negative charge and repels from the negatively charged cathode whilst also attracting to the positively charged anode.

Description : Which is the positive terminal anode or cathode?

Last Answer : Anode is positive terminal and cathode is negative terminal.

Description : Is the anode or cathode longer in LED ?

Last Answer : In LED anode terminal is longer and cathode terminal is smaller.

Description : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. The purpose of adding crylite is :

Last Answer : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. ... . to increase melting point of `Al_(2)O_(3)`

Description : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. What is wrong if anode is made of nickel instant

Last Answer : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite ... CO D. Nickel May be affected by high temperature.

Description : Statement - 1 : `PbSiF_(6) + H_(2) SiF_(6)` + gelatine is taken as electrolyte in electrolytic refining of lead . Statement -2 : Discharge potential o

Last Answer : Statement - 1 : `PbSiF_(6) + H_(2) SiF_(6)` + gelatine is taken as electrolyte in electrolytic ... Statement-1 : is false , statement-2 : is true

Description : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite)` Cathode : fraphite inside Fe -Container Coke power is spreased over the

Last Answer : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite)` Cathode : fraphite inside Fe ... aluminmum by air D. (A) and (B) both

Description : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite) ` Cathode : fraphite inside Fe -Container The purpose of adding cryolite

Last Answer : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite) ` Cathode : fraphite inside ... the impurities as slag D. Both (a) & (B)

Description : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite)` Cathode : fraphite inside Fe -Container Pick out the statement which is

Last Answer : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite)` Cathode : fraphite ... 2)` D. nikkel may be affected at high temperature

Description : How can lignin be deposited in the inner walls of xylem vessel?

Last Answer : Need answer

Description : A hydrometer is used to measure the ____________. A. specific gravity of a battery electrolyte B. water pressure in a deck pipeline C. amount of potable water a vessel is taking on D. power developed by a salt water service pump

Last Answer : Answer: A

Description : The ultrapure metal is obtained by - (1) Calcination (2) Sublimation (3) zone refining (4) None of these

Last Answer : (3) zone refining Explanation: The principal stages in the production of ultrapure metals are the preparation of pure chemical compounds, the reduction of the compounds to the elementary state and further purification.

Description : Embedded system is______ A. An electronic system B. A pure mechanical system C. An electro-mechanical system D. (A) or (C)

Last Answer : D. (A) or (C)

Description : Embedded system is______ A. An electronic system B. A pure mechanical system C. An electro-mechanical system D. (A) or (C)

Last Answer : D. (A) or (C) 

Description : When a vehicle passes, TV reception gets distorted. This is because – (1) metal reflects radiowaves (2) spark plug creates electromagnetic disturbances (3) vehicle pollution affects the performance of the TV components (4) modern vehicles use electro ignition system

Last Answer : (2) spark plug creates electromagnetic disturbances Explanation: This is caused due to the interference caused by the electromagnetic waves generated by a passing vehicle. These waves were within the same ... in which two waves superimpose to form a resultant wave of greater or lower amplitude.

Description : Refining process of impure metals depends upon the differences in properties of the metal. Extraction of Al is usually carried out from its bauxite or

Last Answer : Refining process of impure metals depends upon the differences in properties of the metal. ... . leaching C. liquation D. magnetic seperation

Description : Refining process of impure metals depends upon the differences in properties of the metal. Extraction of Al is usually carried out from its bauxite or

Last Answer : Refining process of impure metals depends upon the differences in properties of the metal. Extraction of Al is usually ... A D. I-D,II-A,III-C,IV-B

Description : Explain the process of zone refining. Name one metal refined by this method.

Last Answer : The apparatus used for zone refining consists of a circular heater fitted around the rod of impure metal at one end. The circular heater is slowly moved to the other end. At the heated zone, ... in solid metal passes into the adjacent molten part. A metal refined by zone refining is germanium.

Description : The correct sequence of steps involved in extraction of metal from its ore is a) removal of impurities, purify metal, reduction of ore b) purify metal, removal of impurities, reduction of metal ore . c ... of metal , reduction d) removal of impurities from ore , reduction of ore , refining of metal

Last Answer : d) removal of impurities from ore , reduction of ore , refining of metal