Nichrome wire is used as a heating element I many appliances because (a) it can be drawn out into wires easily (b) it has high resistivity (c) it resists oxidation in air when red hot (d) both (b) and (c) are correct

1 Answer

Answer :

Ans:(d)

Related questions

Description : Calculate the resistance of a 2 m long nichrome wire of radius 0.321 mm. Resistivity of nichrome is `15xx10^(-6) Omega` m. If a potential difference o

Last Answer : Calculate the resistance of a 2 m long nichrome wire of radius 0.321 mm. Resistivity of nichrome is ` ... wire, what will be the current in the wire ?

Description : __________ wire is never used for making the heating element. (A) Nichrome (B) Kanthal (C) Invar (D) None of these

Last Answer : (C) Invar

Description : High resistance electrical heating elements/wire are not made of (A) Maraging steel (B) Nimonic alloys (C) Kanthal wire (D) Nichrome

Last Answer : (A) Maraging steel

Description : Example of high resistivity material is (A) Nichrome (B) Silver (C) Gold (D) Copper

Last Answer : (A) Nichrome

Description : A wire of resistance `10 Omega` is drawn out so that its length is thrice its original length. Calculate its new resistance (resistivity and density o

Last Answer : A wire of resistance `10 Omega` is drawn out so that its length is thrice its original ... (resistivity and density of the material remain uncharged).

Description : If a metal can be drawn into wires relatively easily it is called: (1) malleable (2) ductile (3) extractive (4) tactile

Last Answer : (2) ductile Explanation: Ductility is a physical property of a material associated with the ability to be hammered thin or stretched into wire without breaking.

Description : If a metal can be drawn into wires relatively easily it is called: w) malleable x) ductile y) extractive z) tactile

Last Answer : ANSWER: X -- DUCTILE

Description : A material is called 'ductile', if it can be (A) Drawn into wires (B) Hammered to a thin sheet (C) Fractured without deformation (D) Made lustrous by heating it

Last Answer : (A) Drawn into wires

Description : `1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

Last Answer : `1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

Description : The heating element in an electric iron is made of (a) Nichrome (b) Tungsten (c) Copper (d) Iron

Last Answer : Ans:(a)

Description : Heating element of an electric heater is made up of------? A. Tungsten B. Graphite C. Chromium D. Nichrome (Answer)

Last Answer : D. Nichrome (Answer)

Description : The material with lowest resistivity is (A) constantan. (B) silver. (C) manganin. (D) nichrome.

Last Answer : (B) silver.

Description : A nichrome heating element connected to a 200 V supply draws an intial current of 2.2 A which settles down after a few seconds to a steady value of 2.

Last Answer : A nichrome heating element connected to a 200 V supply draws an intial current of 2.2 A which settles down after a ... is `1.7xx10^(-4) "per"^(@)C`.

Description : An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. It resistance at room temperature `(27.0

Last Answer : An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. ... range involved , `1.70xx10^-4C^-1`

Description : Heating element of an electric heater is made up of _____? A. Tungsten B. Graphite C. Chromium 26 D. Nichrome

Last Answer : ANSWER: D

Description : An electric iron has a heating element made of – (1) Copper (2) Tungsten (3) Nichrome (4) Zinc

Last Answer : (3) Nichrome Explanation: Nichrome is used in electric iron because it has high resistance and it is stable in air when hot. Nichrome wire forms a protective layer of chromium oxide. Chemically it is quite stable and does not combine with other atmospheric gases even in high temperature.

Description : An electric iron has a heating element made of : (1) Copper (2) Tungsten (3) Nichrome (4) Zinc

Last Answer : Nichrome

Description : Which of the following has high tensile strength? (A) Plain hot rolled wires (B) Cold drawn wires (C) Heat treated rolled wires (D) All have same tensile strength

Last Answer : Answer: Option B

Description : Nichrome wire is used in an electric heater because _______. (1) It has high resistance (2) It has high melting point (3) It can resist a current upto approx 5 amperes (4) For all of the above reasons

Last Answer : (4) For all of the above reasons

Description : Pick out the wrong statement. (A) Tin can be readily and very easily drawn into very fine wire (B) Tin can be severely cold worked without the necessity of annealing due to its low recrystallisation temperature (C) Tin exists in two allotropic forms

Last Answer : (A) Tin can be readily and very easily drawn into very fine wire

Description : Two wires of the same dimensions but resistivities `rho_(1)` and `rho_(2)` are connected in series. The equivalent resistivity of the combination is

Last Answer : Two wires of the same dimensions but resistivities `rho_(1)` and `rho_(2)` are connected in series. The equivalent ... (2))` D. `sqrt(rho_(1)rho_(2))`

Description : An alloy used in making heating elements for electric heating device is - (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Last Answer : (3) Nichrome Explanation: Nichrome is a mixture of chromium and nickel. Nichrome wire is a great conductor of electricity. Nichrome is used to make heating coils and other types of elements in household appliances.

Description : Which of the following metals is used for the manufacture of heating elements provided in electric iron? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Last Answer : (3) Nichrome Explanation: Nichrome is the most common domestic heating element and is found in many household products. Commonly, items such as toasters, hair dryers and heaters use nichrome coils to ... percent nickel and 20 percent chromium, and its high melting point of 1,400 degrees Celsius.

Description : The heating elements of electric irons are made of (A) Copper. (B) Nichrome. (C) Constantan. (D) Aluminium.

Last Answer : (B) Nichrome.

Description : An alloy used in making heating elements for electric heating device is (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Last Answer : Nichrome

Description : Which of the following metals is used for the manufacture of heating elements provided in electric iron ? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Last Answer : Nichrome

Description : What happens to a nichrome wire in a non-luminous flame?

Last Answer : The color of wire is unchanged.

Description : A nichrome wire used as heater coil has the resistance of 1 ohm/m. For a heater of 1000 W at 200 V, the length of wire required will be 

Last Answer : A nichrome wire used as heater coil has the resistance of 1 ohm/m. For a heater of 1000 W at 200 V, the length of wire required will be 40 m.

Description : Nichrome wire is an alloy of?

Last Answer : Nichrome wire is an alloy of nickel and chromium.

Description : Ultimate strength of cold drawn high steel wires (A) Increases with increase in diameter of bar (B) Decreases with increase in diameter of bar (C) Does not depend on diameter of bar (D) None of the above

Last Answer : Answer: Option B

Description : A truss element a.107 dynes b.resists lateral forces c.is a two-force body d.is a three force body e.resist forces in compression only

Last Answer : c. is a two-force body

Description : The material used for a fuse wire should have (a) high resistivity (b) high ductility (c) high melting point (d) low melting point

Last Answer : Ans:(d)

Description : Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.

Last Answer : (A) Ductility.

Description : Non-metals cannot be drawn into wires. Why ? [DAV2008] -Science

Last Answer : Non-metals are not ductile, therefore they cannot be drawn into wires.

Description : The property of materials by which they can be drawn into wires is known as: A) malleability B) elasticity C) creep D) ductility

Last Answer : The property of materials by which they can be drawn into wires is known as: ductility

Description : Copper wires are generally used for electrical power transmission instead of iron wire because (1) copper is cheaper than iron (2) copper is lighter than iron (3) copper is a better conductor of electricity than iron (4) copper can take higher power than iron

Last Answer : (3) copper is a better conductor of electricity than iron Explanation: Copper is generally preferred for electrical power transmission instead of iron because of its high electrical conductivity and low resistivity.

Description : Copper wires are generally used for electrical power transmission instead of iron wire because : (1) copper is cheaper than iron (2) copper is lighter than iron (3) copper is a better conductor of electricity than iron (4) copper can take higher power than iron 

Last Answer : copper is a better conductor of electricity than iron

Description : A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Last Answer : a. remains the same

Description : Which of the following statements is correct concerning the circuits in a sound powered telephone system? A. The ringing circuit is composed of only one common wire to ground. B. The common ... connected to each station. D. The talking and calling circuits are electrically dependent upon each other.

Last Answer : Answer: B

Description : __________ does not contain copper as an alloying element, (A) Nichrome (B) Manganin (C) Perminvar (D) Monel metal

Last Answer : (A) Nichrome

Description : Energy is lost in wires due to A. heating B. resistance C. conduction D. both A and B

Last Answer : both A and B

Description : Pick up the correct statement from the following: (A) The free quartz suddenly expands at a temperature lower than 600°C (B) The lime stone resists fire upto about 800°C and at higher temperature it splits into ... (C) The sand stone with silicates resist a fire in a better way (D) All the above

Last Answer : Answer: Option D

Description : The filament of an electric lamp becomes white hot but the lead-in wires holding the filament are only slightly heated because they (a) have smaller current passing through them (b) have very low resistance (c) have higher melting point (d) are made of black iron

Last Answer : Ans:(b)

Description : What length of an alloy wire of resistivity 5.0x10^-7 Ωm and diameter 0.50mm is required to make a standard 6.0Ω resistor?

Last Answer : Interesting homework question. I’m not knowledgeable about physics, but putting myself in the shoes of someone who is.. Why don’t you post the answer that you got, and show your work, and ask us where you went wrong on the problem.

Description : Given that resistivity of copper is `1.68xx10^(-8) Omega`m. Calculate the amount of copper required to draw a wire 10 km long having resistance of `10

Last Answer : Given that resistivity of copper is `1.68xx10^(-8) Omega`m. Calculate the amount of copper required to draw a ... copper is `8.9xx10^(3) kg m^(-3)`.

Description : A rheostat has 100 turns of a wire of radius 0.4 mm having resistivity `4.2xx10^(-7) Omega`m. The diameter of each turn is 3 cm. What is the maximum v

Last Answer : A rheostat has 100 turns of a wire of radius 0.4 mm having resistivity `4.2xx10^(-7) ... the maximum value of resistance that it can introduce ?

Description : Calculate the electric field in a copper wire of cross-sectional area `2.0 mm^(2)` carrying a current of 1 A. The resistivity of copper `=1.7xx10^(-8)

Last Answer : Calculate the electric field in a copper wire of cross-sectional area `2.0 mm^(2)` carrying a current ... of copper `=1.7xx10^(-8) Omega`m.

Description : The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.

Last Answer : The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.

Description : A wire of 50 cm long, `1mm^(2)` in cross-section carries a current of 4 A, when connected to a 2 V battery, the resistivity of wire is

Last Answer : A wire of 50 cm long, `1mm^(2)` in cross-section carries a current of 4 A, when connected to a 2 V ... `4xx10^(-6)Omega-m` D. `1xx10^(-6)Omega-m`

Description : The resistivity of a potentiometer wire is `40xx10^(-8)Omega-m` and its area of cross section is `8xx10^(-6)m^(2)`. If 0.2 A current is flowing throug

Last Answer : The resistivity of a potentiometer wire is `40xx10^(-8)Omega-m` and its area of cross section is `8xx10^(-6)m^(2)` ... . `3.2xx10^(-2)V//m` D. `1V//m`