159 views
what is the minimum voltage required to turn on a diode ?

1 Answer

Answer :

0.7 v sil and 0.3 v for gr


Like 1 like

Please log in or register to answer this question.

Related questions

2.7k views

Description : A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current requirement is 0.2 A. The minimum voltage at input is 24 V. What is the required value of series resistance with source? A) 5.45 Ω B) 6 Ω C) 7.2 Ω D) 6.38 Ω  

Last Answer : A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current requirement is 0.2 A. The minimum voltage at input is 24 V. What is the required value of series resistance with source? A) 5.45 Ω B) 6 Ω C) 7.2 Ω D) 6.38 Ω  

1 answer
244 views

Description : Is gate turn on mechanism of GTO is similar to conventional thyristor?

Last Answer : Yes gate turn on mechanism of GTO is similar to conventional thyristor.

1 answer
106 views

Last Answer : GTO can be turned on by providing positive pulse to the gate terminal and it can be turn off by providing negative pulse to gate terminal.

1 answer
227 views

Description : Minimum voltage regulation occurs when the power factor of the load is?

Last Answer : Minimum voltage regulation occurs when the power factor of the load is leading.

1 answer
1.7k views

Description : Draw the structural diagram of GTO. Explain briefly the switching behavior of GTO with the help of appropriate voltage and current waveform.

Last Answer : Gate Turn Off Thyristor (GTO) Conventional Thyristor can be turned on with gate terminal but can not turn off from gate terminal. But in case of Gate Turn Off Thyristor (GTO), we can turn it on and off ... subdivided as storage period (Ts), fall period (Tp) and tail period (Tt).

1 answer
172 views

Description : A diode in which the change in reverse bias voltage varies the capacitance is called as A) Varactor diode B) Switching diode C) Tunnel diode D) Zener-diode  

Last Answer : A diode in which the change in reverse bias voltage varies the capacitance is called as Varactor diode

1 answer
112 views

Last Answer : Yes, Zener diode is a voltage regulator. Zener diode maintain constant reverse Biased Voltage. If the current is varying then also zener diode maintain constant voltage.

1 answer
111 views

Description : Analyze the effect of supply voltage on performance of LED as regards current, Lumen output, efficacy and life. 

Last Answer : 1) Effect on Current:- In LED current depends upon supply voltage, if voltage get changes then current also change but this change in current will be control by resistors which are connected in series.  2) ...   4) Effect on Life:- If supply voltage is not stable then life of LED get reduced. 

1 answer
334 views

Description : With the help of N-channel JFET describe the effect of input voltage VGS on output current ID.

Last Answer : Working of N channel FET: * When a voltage is applied between the drain and source with a DC supply (VDD), the electrons flows from source to drain through narrow channel ... where the channel gets completely blocked and the drain current becomes zero is called pinch- off voltage. 

1 answer
414 views

Description : Explain the need and steps to conduct the reduced voltage running up test on the three phase induction motor.

0 answers
3.6k views

Description : Explain the principle of ON-OFF control and phase control of AC voltage controller with suitable circuit and waveforms.

Last Answer : The integral cycle control (on-off control) and phase angle control are the two types of AC voltage controller. The principle of ON-OFF control: The on-off control is also called an integral cycle ... control. In phase control, the switch is on for some period of each cycle.  

1 answer
168 views

Description : A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are :  (A) less than 66 kV (B) lie between 66 kV and 110 kV (C) more than 165 kV (D) lie between 110 kV and 165 kV

Last Answer : A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are : lie between 66 kV and 110 kV

1 answer
174 views

Description : In an R-C phase shift oscillator, the minimum no. of R-C networks to be connected in cascade will be -

Last Answer : In an R-C phase shift oscillator, the minimum no. of R-C networks to be connected in cascade will be 3

1 answer
3 views

Description : What do you mean by turn?

Last Answer : Ans. Two conductors connected in series by end connection is called turn.

1 answer
5 views

Description : How to Do a Stop Turn in Soccer

Last Answer : How to Do a Stop Turn in Soccer Soccer involves much bobbing and weaving to avoid defenders. You must have total control over the ball if you want to score a goal or pass to an open teammate. ... . Just devote some time to practice it regularly and you'll soon burn defenders with goals and assists.

1 answer
11 views

Description : How to do a Bootlegger Turn

Last Answer : How to do a Bootlegger Turn Have you seen that car stunt in movies where the vehicle hurtles towards a roadblock, then swerves on the spot, making a 180 degree turn, before coming back the other way ... you can drive properly and you remember the safety tips, you'll end up with an impressive stunt.

1 answer
95 views

Last Answer : No we cannot turn off normal thyristor using Gate.

1 answer
10 views

Description : How does the temperature affect the Zener voltage of a Zener diode?

Last Answer : The Zener voltage of a Zener diode is affected by temperature changes. The Zener voltage of a diode is directly proportional to the temperature. This means that as the temperature increases, the ... is given by the Zener voltage temperature coefficient, which is specified in the diode's datasheet.

1 answer
1.5k views

Description : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Last Answer : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

1 answer
96 views

Description : For optimum generator scheduling for different power plants, the minimum fuel cost is obtained when

Last Answer : For optimum generator scheduling for different power plants, the minimum fuel cost is obtained when The incremental fuel cost of each plant multiplied by the penalty factor is the same

1 answer
305 views

Description : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB 

Last Answer : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB 

1 answer
167 views

Description : The Minimum Oil Circuit Breaker (MOCB) is named because of :  (A) Reduced requirement of oil (B) Reduced requirement of air (C) All of the above (D) None of the above

Last Answer : The Minimum Oil Circuit Breaker (MOCB) is named because of : Reduced requirement of oil 

1 answer
85 views

Description : ln a minimum oil circuit breaker the oil is used

Last Answer : ln a minimum oil circuit breaker the oil is used to act as circuit breaking medium only

1 answer
292 views

Description : The minimum charge on an ion is?

Last Answer : The minimum charge on an ion is equal to the charge of an electron.

1 answer
215 views

Description : Build using minimum number of CMOS gates. Three input NAND gate. Two input NOR gate Three input NOR gate Two input AND gate Two input OR gate

Last Answer : Three input NAND gate. Two input NOR gate Three input NOR gate Two input AND gate Two input OR gate

1 answer
231 views

Description : Diode VI characteristics

Last Answer : Diode VI characteristics

1 answer
68 views

Description : applications of Schottky diode.

Last Answer : 1) To rectify very high frequency signals. 2) As a switching device in digital computers. 3) In clipping & and clamping circuits. 4) In low power schottky TTL circuits. 5) In mixing and detecting circuits used in communication systems. 6) In low voltage power supply circuits.

1 answer
75 views

Description :  applications of P-N junction diode

Last Answer : 1.It is used as rectifier in DC power supply 2.It is used as free wheel diode across relay or inductive load 3.It is used as switch in logic circuits used in computers 4.It is used as detector in demodulation circuits of communication receiver 

1 answer
169 views

Description : State any two applications of zener diode.

Last Answer : Applications of Zener Diode: i) As a voltage regulator. ii) As a fixed reference voltage provider in transistor biasing circuits. iii) As peak clippers or limiters in wave shaping circuits.

1 answer
94 views

Description : List specification of zener diode

Last Answer : 1. Zener Voltage 2. Maximum Zener current 3. Power dissipation 4. Operating temperature 5. Dynamic Resistance 

1 answer
128 views

Description : Define ripple factor and PIV of diode.

Last Answer : 1. Ripple factor: It is define as ratio of R.M.S. value of AC component to the DC component in the output.  2. PIV : It is maximum reverse voltage that diode can withstand without destroying junction.

1 answer
291 views

Description : Explain the operating principle of LASER and list applications of LASER diode.

Last Answer : A basic construction of Laser diode is as shown . A PN junction is formed by two layers of doped gallium arsenide. There is highly reflective surface at one end of PN junction and ... 6. laser scanning and light beam illumination. 7. Military applications 8. Medical surgery 9.Diamond cutting

1 answer
120 views

Description : Write short notes on diode.

Last Answer : Diode is made from semiconductor material like silicon or germanium. Diode may use as rectifier which convert AC to DC. It is a electronic component. It is two terminal device, one is anode and second is ... in one direction. Diode is made from P-type and N-type material. Diode have a PN junction.

1 answer
181 views

Description : what is diode ?

Last Answer : Semiconductor device. That allows flow of current in one direction

2 answers
5 views

Description : Explain Zener Diode.

0 answers
238 views

Description : Suggest the diode material suitable to rectify 0.5V AC signal.

Last Answer : The diode material suitable to rectify 0.5V AC signal is silicon

1 answer
468 views

Description : Draw symbols of zener diode and LED.

Last Answer : Symbol of zener diode : Symbol of LED

1 answer
57 views

Description : Diode

0 answers
118 views

Description : While studying the V-I characteristics of a zener diode, there are two different values of resistors connected in series with it. In case of the forward characteristics, a ~70 ohm resistor is connected ... ~510 ohm resistor. What is the reason behind it ? Is the difference really necessary ?

0 answers
125 views

Description : Write the function of freewheeling diode.

Last Answer : Function of Freewheeling Diode (FWD): a) Freewheeling diode is used across inductive loads such as coils, dc motor armature etc. to prevent voltage spikes across these loads when the switching ... current is shifted from switching device, it is turned off easily and regain its blocking ability.

1 answer
63 views

Description : Avalanche diode

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

1 answer
211 views

Description : Which diode exhibits negative resistance characteristic? (A) LED (B) Zener (C) Tunnel diode (D) PN diode

Last Answer : Which diode exhibits negative resistance characteristic? (A) LED (B) Zener (C) Tunnel diode (D) PN diode

1 answer
145 views

Description : What is a diode clamper circuit?

Last Answer : Tha faction of diode 

1 answer
129 views

Description : What is the use of diode in the circuit?

Last Answer : Diode is a device which allows the flow of current in one direction and blocks the current in opposite direction.

1 answer
82 views

Description : Which side of the diode is positive?

0 answers
245 views

Description : How can you identify a zener diode?

Last Answer : It  conducts  current  in  either  direction.

2 answers
74 views

Description : How do we test a diode?

Last Answer : test

1 answer
2.6k views

Description : Explain the formation of parasitic BJT and parasitic diode in Power MOSFET. Can parasitic diode be used in same power electronics applications?

Last Answer : Parasitic Diode: The parasitic diode is in between drain and source. The MOSFET structure itself contains parasitic diode or body drain diode. This parasitic diode allows the reverse flow of current when the ... of MOSFET as a BJT collector. Parasitic BJT operates in the cut-off region.

1 answer
...