2.9k views
What is the reciprocal of capacitance?

3 Answers

Answer :

Elastance (S) is the reciprocal of capacitance (C).

The formula for capacitance (C) is charge (Q)/voltage (V) and formula for elastance (S) is voltage (V)/charge (Q) .

The unit of capacitance is Farad and unit of elastance is Daraf.

Like 0 like

Answer :

The reciprocal of capacitance is Elastance.

Like 0 like

Answer :

The reciprocal of capacitance is called elastance, and its unit is the reciprocal farad, also called the daraf.

Like 0 like

Please log in or register to answer this question.

Related questions

421 views

Description : Reciprocal of reluctance is?

Last Answer : Reciprocal of reluctance is permeance.

1 answer
474 views

Description : What is the reciprocal of inductance?

Last Answer : This term is not exist

1 answer
114 views

Description : What is the reciprocal of resistivity?

Last Answer : conductivity, mho

2 answers
180 views

Description : what is the reciprocal of admittance?

Last Answer : impedance is the reciprocal of admittance.

1 answer
465 views

Description : what is the reciprocal of reactance?

Last Answer : reciprocal of reactance is susceptance.

1 answer
59 views

Description : Conductance is reciprocal of?

Last Answer : Conductance is reciprocal of resistance.

1 answer
146 views

Description : effect of inductance and capacitance on performance of transmission line.

Last Answer : Following are the effect on performance of transmission line:  1. Due to inductance (L) voltage drop in transmission line produces.  2. Capacitor (C) draws charging current ... , transmission line efficiency, voltage regulation & also power factor of transmission line gets affected. 

1 answer
84 views

Description : What is capacitance?

Last Answer : Capacitance is the capacity of element to store electric charge in it. The unit of capacitance is Farad. 

1 answer
84 views

Description : Energy stored in electrostatic field of capacitance formula

Last Answer : Energy stored in electrostatic field of capacitance formula

1 answer
60 views

Description : Capacitance

Last Answer : Capacitance formula

1 answer
121 views

Description : What is the capacitance when a capacitor passes a current of 31.43 mA when supplied with 40 V AC with a frequency of 1000 Hz? A) 0.125 F B) 0.125 μF C) 1257.2 μF D) None of these

Last Answer : What is the capacitance when a capacitor passes a current of 31.43 mA when supplied with 40 V AC with a frequency of 1000 Hz? A) 0.125 F B) 0.125 μF C) 1257.2 μF D) None of these

1 answer
201 views

Description : The time constant of the capacitance circuit is defined as the time during which voltage?

Last Answer : The time constant of the capacitance circuit is defined as the time during which voltage rises to 63.2% of its final steady value.

1 answer
135 views

Description : Calculate the value of equivalent capacitance of the combination.

Last Answer : Calculate the value of equivalent capacitance of the combination

1 answer
80 views

Description : Explain estimation of channel capacitance of CMOS.

Last Answer : Capacitance estimation: The dynamic response i.e. switching speed of MOS system depends on capacitance associated with the MOS devices which are formed by different layers in MOS transistors ... are due to three dimensional, distributed charge voltage relations within the device structure. 

1 answer
174 views

Description : A diode in which the change in reverse bias voltage varies the capacitance is called as A) Varactor diode B) Switching diode C) Tunnel diode D) Zener-diode  

Last Answer : A diode in which the change in reverse bias voltage varies the capacitance is called as Varactor diode

1 answer
111 views

Description : Capacitance is the ability of a body to store an__________.  (A) electrical charge (B) electric current (C) voltage (D) All of the above

Last Answer : Capacitance is the ability of a body to store an electrical charge 

1 answer
449 views

Description : For 11 kV line the capacitance per km per phase will be of the order of:  (A) 1 Farad (B) 0.1 Farad (C) 0.01 Farad (D) 0.01 microF

Last Answer : For 11 kV line the capacitance per km per phase will be of the order of: 0.01 Farad

1 answer
2.9k views

Description : Which of the following can be used to measure the capacitance of a capacitor? A) Rheostat B) Schering bridge C) Wheatstone bridge D) None of these

Last Answer : Which of the following can be used to measure the capacitance of a capacitor? A) Rheostat B) Schering bridge C) Wheatstone bridge D) None of these

1 answer
260 views

Description : A suspension type insulator has 2 units with self capacitance C and ground capacitance of 0.2 C. Each unit can withstand for a maximum voltage of 11 kV. Its string efficiency is  (A) 78% (B) 82% (C) 80% (D) 84%

0 answers
119 views

Last Answer : Shunt capacitance is neglected while considering short transmission line.

1 answer
92 views

Last Answer : Yes BJT have internal capacitances.

1 answer
622 views

Description : For a two -port reciprocal network, the three transmission parameters are A = 4, B = 7 and C = 5. What is the value of D ?  (a) 9.5 (b) 9.0 (c) 8.5 (d) 8.0

Last Answer : For a two -port reciprocal network, the three transmission parameters are A = 4, B = 7 and C = 5. What is the value of D ?  (a) 9.5 (b) 9.0 (c) 8.5 (d) 8.0

1 answer
227 views

Description : Admittance is reciprocal of  (a) susceptance (b) impedance (c) reactance (d) conductance

0 answers
145 views

Description : For a two port network to be reciprocal:  (A) Z11= Z22 (B) Y21 = Y21 (C) h21 = h22 (D) AD-BC = 0 

0 answers
100 views

Description : The reciprocal of resistance is called  (A) Impedance (B) Conductance (C) Inductance (D) Susceptance

0 answers
173 views

Last Answer : Reciprocal of conductivity is resistivity.

1 answer
100 views

Description : what is the reciprocal of resistance ?

Last Answer : reciprocal of resistance is conductance.

1 answer
197 views

Description : What is the value of capacitance required to improve power factor from 0.7 to 0.9. Given that: Real power = 50 W Vrms of the source = 120 Frequency = 50 Hz   #powerfactor

0 answers
2.6k views

Description : Define each of following terms of operational amplifiers i) Slew rate ii) Input offset voltage iii) Voltage gain iv) Input capacitance

Last Answer : i) Slew rate:- Maximum rate of change of o/p voltage per unit of time. It is express in volt/µsec.  ii) Input offset voltage:- The voltage that must be applied between two ... capacitance that can be measured at either be inverting or non-inverting terminal with other terminal connected to ground.

1 answer
374 views

Description : With neat diagram, explain working of capacitance level measurement.

Last Answer : working : The capacitive level detector operates on the equation of parallel plate capacitor, i.e. C = ε A/d. It consist of an insulated capacitance probe (which is a metal electrode) ... in the capacitance is measured and is displayed on the indicator calibrated in terms of liquid level. 

1 answer
160 views

Description : State the effects of errors in dynamometer type wattmeter due to i) pc- inductance ii) pc- capacitance iii) mutual inductance iv) Connection.

Last Answer : Errors in wattmeter:  i) pc - inductance: Pressure coil inductance causes wattmeter to read more power than actual .  ii) pc-capacitance: The wattmeter reads less power.  iii) ... iv) Connection: In uncompensated wattmeter , the reading of wattmeter includes the powerloss in coils. 

1 answer
60 views

Description : What is capacitance? State its unit.

Last Answer : Capacitance: The capacity of a capacitor to store electric charge is known as its capacitance. The capacitance of a capacitor is defined as the ratio of the charge Q stored on its either plates to the ... the plates. The capacitance is expressed as, C = Q/V The unit of capacitance is farad.

1 answer
335 views

Description : Three capacitors 15µf, 18µf and 12µf are connected in a circuit. Find equivalent capacitance when they are connected in – 1) Series 2) Parallel

Last Answer : Ans: Value of equivalent capacitance: Given: C1= 15μF, C2=18 µF, C3= 12µF  i)For Series combination of capacitors: 1/Cs = (1/C1)+( 1/C2) +(1/C3) = (1/15)+( 1/18)+( 1/12) 1/Cs = 0.0666+0.0555+0. ... Cs = 4.868 µF   ii) For parallel combination of capacitors: Cp = C1 + C2 + C3 = 15 +18+ 12 = 45 µF 

1 answer
730 views

Description : The capacitance of reverse biased P-N junction  1. Decreases with increasing the reverse bias 2. Increases with increasing the reverse bias 3. Depends only on reverse saturation current 4. Makes the P-N junction more effective at high frequencies 

Last Answer : The capacitance of reverse biased P-N junction Decreases with increasing the reverse bias

1 answer
128 views

Description : What happens to the capacitance if mica is inserted between the plates of an air capacitor? A) The capacitance increases B) The capacitance decreases C) The capacitance remains the same D) The capacitance becomes zero

Last Answer : What happens to the capacitance if mica is inserted between the plates of an air capacitor? A) The capacitance increases B) The capacitance decreases C) The capacitance remains the same D) The capacitance becomes zero

1 answer
135 views

Description : In a 3-insulator string voltage distribution system the ratio of capacitance between pin and earth to the self capacitance of each unit is 1/4. If the potential across the top unit is 8 kV, then the string voltage is (A) 22.5 kV (B) 24 kV (C) 26 kV (D) 32.5 kV

Last Answer : In a 3-insulator string voltage distribution system the ratio of capacitance between pin and earth to the self capacitance of each unit is 1/4. If the potential across the top unit is 8 kV, then the string voltage is 32.5 kV

1 answer
221 views

Description : With the help of which bridge are the capacitance and dielectric loss of a capacitor generally measured ?

Last Answer : With the help of Schering bridge are the capacitance and dielectric loss of a capacitor generally measured.

1 answer
93 views

Description : A series RLC circuit resonate at 200 Hz. If the capacitance is increased to four times, the circuit will be in resonance at   (a) 100 Hz (b) 200 Hz (c) 400 Hz (d) 800 Hz  

0 answers
168 views

Description : A parallel combination of capacitance C and resistance R is connected in series with inductance L and small resistance r. Under what condition will the circuit be non-reactive?  (A) C=LR (B) C=LR2 (C) C=L/R2 (D) C=L/R

0 answers
183 views

Description : The capacitance of 0-1000V electrostatic voltmeter increases from 36-42 pF from zero to full scale deflection. It is required to extend the range of voltmeter to 10000 V by using an external series capacitor. What should be the value of ... ?  (A) 0.8 pF (B) 1.00 pF (C) 6.644 pF (D) 4.667 pF 

0 answers
166 views

Description : What happens to the angle between current and voltage, when a small capacitance is added in series with a highly inductive circuit?  (A) Increases (B) Remains same as earlier angle (C) Decreases (D) Becomes indeterminant

0 answers
799 views

Description : In series resonant circuit, increasing inductance to its twice value and reducing capacitance to its half value?  

Last Answer : In series resonant circuit, increasing inductance to its twice value and reducing capacitance to its half value will increase the selectivity of the circuit.

1 answer
121 views

Last Answer : Resistance: This could be defined as the opposition  or retarding force to the flow of current in a circuit. It is measured in Ohms. Capacitance: The ability of a system of electrical conductors and insulators ... due to a rate of change of current in the circuit or coil. It's unit is Henry.

1 answer
197 views

Description : what will be the capacitance if three capacitors connected in parallel each having value of 0.5 micro Farad ?

Last Answer : the total capacitace when connected in parallel Tc=total capacitor c1=c2=c3=0.5uf Tc=c1+c2+c3 Tc=1.5uf

3 answers
134 views

Last Answer : Capacitance meter or LCR meter.

2 answers
96 views

Last Answer : The unit of capacitance is Farad denoted by capital F .

1 answer
...