Working principle of a generator

3 Answers

Answer :

Mechanical energy to electrical energy

Answer :

Generator works on the principle of Faraday's law of electromagnetic induction. Generator do not generate electrical energy actually, generator converts mechanical energy into electrical energy. Fleming's right hand rule is applicable for generators. There are two types of generator one is AC generator and second is DC generator.

Faraday's law states that: 

EMF = -Ndϕ/dt

Where, N is number of turns of coil,

ϕ is the magnetic flux.

Answer :

converts mechanical energy to electrical energy by application of Lenz law which sates;a current carrying conductor experiences a magnetic effect arrount it.

If the rotor of a generator is a magnet, then when is rotated the magnetic field produced cut accros copper windings (flemings right hand rule) current will be induced in copper windings according to Faraday law.

Related questions

Description : Describe the working principle of photoelectric pickup type tacho-generator.

Last Answer : Working: Working principle: The light passes through the holes available on the rotating disc with a specific interval, depends on the angular speed of disc having equidistant holes. The frequency of this light pulses ... by N=f/HS  N=speed  f=frequency  Hs=holes on the disc

Description : State principle of operation of DC generator.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : Describe with neat diagram working of DC tacho-generator. 

Last Answer : Explanation : The D.C Tachogenerators is a type of electrical type's tachogenerators which can also be used for speed measurement.The D.C tachogenerator is shown in above figure. The ... to collect current from commutator and make it available to external circuitry of the d.c tachogenerator.

Description : 1. State the principle of an electric generator. -Physics-10

Last Answer : Electric generator works on the principle of electromagnetic induction. In a generator, electricity is generated by rotating a coil in the magnetic field.

Description : A transformer works on the principle of – (1) Self induction (2) Mutual induction (3) Generator (4) Inverter

Last Answer : (2) Mutual induction

Description : State the Principle of Power Generator

Last Answer : The basic principle is that the coils are kept stationary while magnet is turned inside the coil. The stationary coil is called stator. The moving magnet is called rotor.

Description : The principle of AC generator is: a. Mutual induction b. self induction c. electromagnetic induction d. Induction

Last Answer : b. self induction

Description : The Principle of an alternating current generator is based on: a. Coulomb’s law b. Ampere’s law c. Faraday’s law d. Lenz’s law

Last Answer : a. Coulomb’s law

Description : A transformer works on the principle of (1) Self induction (2) Mutual induction (3) Generator (4) Inverter

Last Answer : Mutual induction

Description : What is the principle of DC generator?

Last Answer : principle

Description : State working principle of electric welding. 

Last Answer : Working principle of Electric welding: In resistance welding, sufficiently heavy current at low voltage is passed directly through two metals in contact to be welded. Heat is produced due to I2R ... industry. 15. For fabrication and repair work. 16. In other metal processing industries.

Description : working principle of single phase motor

Last Answer : The Stator of single phase induction motor houses two windings  1. Main (Running) winding 2. Auxiliary (Starting ) winding Rotor of single phase induction motor is ... with starting winding or a capacitor may be permanently connected in series with Auxiliary (Starting ) winding.

Description : State working principle and applications of servo motor.

Last Answer : Working Principle of Servo Motor: Basically servo motor is made up of DC motor, which is controlled by a potentiometer and some gears. Its angle of rotation is controlled by the duration of ... Packaging 6) Woodworking 7) Textiles 8) Printing 9) Robotics 10) Portable drilling 11)Process control 

Description : State working principle of universal motor with the help of diagram.

Last Answer : Working Principle of Universal motor : It is modified DC series motor which can work on AC as well as DC supply. According to basic motor principle, whenever a current carrying conductor is placed in magnetic ... They have nearly same operating characteristic for both AC and DC supply. 

Description : State the working principle of gears and give its applications.

Last Answer : Working Principle:  Gears are mechanical elements which transmit motion by means of successively engaging teeth.  Gears are used to transmit motion from one shaft to another or between ... Agricultural equipment.  Industrial construction.  Mining equipment.  Automotive equipment.

Description : State working principle of analog to digital and digital to analog conversion.

Last Answer : i) Analog-to-digital Converters: In a digital computer control system, the plant output (or controlled variable) is usually an analog signal, which is measured by sensors (or instruments). This ... that provides an output voltage or current normalized to a full-scale (FS) reference value.

Description : Which type of flow is measured by hot wire anemometer and describe its working principle with suitable diagram. 

Last Answer : Heat transfer flowmeters this type of flowmeter measures the rise in temperature of the fluid after a known amount of heat has been added to it. Its theory is based upon the specific heat equation ... a supply so as to maintain the wire temperature constant, when the amount of heat transfer varies

Description : State working principle of column type load cell and state its any four applications.

Last Answer : Load cell is an elastic member as the primary transducer and strain gauge is the secondary transducer. When this combination is used, it is called load cell. In this case an axial compressive load causes a negative ... . 3. It is used for weighing 4. It is used to measure torque force.

Description : State working principle of A/D converter. ?

Last Answer : An A/D converter converts the analog signal which is measured by sensors to its equivalent digital form. The conversion of analog measurements to digital measurements involves three operations, namely sampling, quantization and encoding.

Description : With the help of a neat circuit diagram explain the working principle of Digital to Analog converters.(DAC)

Last Answer : Digital-to-Analog Converters:  D/A conversion is the process of converting a value represented in digital code such as binary or BCD into a voltage or current which is proportional ... total of input voltage levels which represents the equivalent analog signals of the 4-bit digital input.

Description : List the types of ADCs. Explain working principle of any one type of ADC.

Last Answer : Types : 1. Successive approximation type A/D converter or Potentiometric type 2.Voltage to time or ramp type A/D converter 3.Voltage to frequency or integrating type A/D converter 4.Dual ... analog voltage and reference voltage are converted to ramp signals of different slopes by the integrator.

Description : Draw and explain the working principle of turbine type flow meter. Mention its Application area.

Last Answer : Working Principle: The flow of liquid past the wheel causes the wheel to rotate at a rate which is proportional to the velocity of the fluid. A voltage pulse is induced in ... Suitable for low viscosity high flow measurements 3) Used in petrochemical industries, in Aerospace applications etc.

Description : State the working principle and specification of LVDT 

Last Answer : Diagram: A Linear Variable Differential Transformer (RLVDT) is an electromechanical transducer that provides a variable alternating current (AC) output voltage that is linearly proportional to the ... a secondary transducer it can be used as device to measure force, weight and pressure

Description : Explain in brief the working principle of strain gauge. Define gauge factor and list out types of strain gauges.

Last Answer : If a metal conductor is stretched or compressed, the resistance changes as both length and diameter change. There is a change in the value of resistivity of the conductor also when it is ... metal film strain gauges 6. Diffused metal strain gauges 7. Sputter deposited thin metal strain gauge

Description : State the working principle of thermistors 

Last Answer : A thermistor is a type of resistor whose resistance is dependent on temperature. Working principle: Whenever there is a change in temperature, the resistance of some semiconductors change . In case of ... . In case of NTC type, the resistance of the thermistor decreases with increase in temperature.

Description : Draw and explain the working principle of ultrasonic level measurement system. Also give advantages, disadvantages and applications of it.

Last Answer : Ultrasonic level detectors operate either by the absorption of acoustic energy as it travels from source to receiver or by the attenuation (frequency change) of a vibrating diaphragm face, oscillating at ... without making physical contact with the process material. 2. They have no moving parts.

Description : Explain the working principle of electromagnetic flow meter.

Last Answer : Working Principle: The electromagnetic flow meter uses Faraday's Law of electromagnetic induction to measure the process flow. When an electrically conductive fluid flows in the pipe, an electrode voltage E ... ) The electrode voltage E is directly proportional to the average fluid velocity V.

Description : State working principle of thermocouple.

Last Answer : Working principle of thermocouple. When heat is applied to junction (hot junction) of the two dissimilar metals, an emf is generated which can be measured at the other junction (cold junction). The two ... as a result of the generated emf. This current will continue to flow as long as T1>T2.

Description : Explain working principle of bimetallic thermometer.

Last Answer : Working principle: Figure shows construction of bimetallic thermometer, it consists of bimetallic strip usually in the form of a cantilever beam, which is prepared from two thin strips of different ... the thickness of the metal. Pointer is attached to the free end to indicate the temperature

Description : Describe working principle of ultrasonic level detector with diagram.

Last Answer : Working Principle: ultrasonic level detector works on the principle of SONAR. It consists of a ultrasonic transmitter-receiver set mounted on the top of the tank. The beam is projected downward ... 2) Temperature compensation is required 3) The dirt affects the accuracy of the measurement. 

Description : With the help of neat sketch, state working principle of rotameter. 

Last Answer : Explanation- When there is no flow through the Rota meter, the float rest at the bottom of metering tube. When fluid enters the tube, the float moves up and the flow area increases. The float ... on the tube. With the help of float position and calibrated scale, we can measure the flow rate.

Description : State working principle of earth tester.

Last Answer : Earth tester:-The resistance of the earth is measured with the help of earth tester. It consists of a hand cranked type generator, the magnet poles, crossed coils and flexible spirals. It consists ... deflection of the pointer will indicate directly resistance in ohm of the earth under test.

Description : State working principle of PMMC instrument.

Last Answer : Working Principle of PMMC Instrument: When current carrying conductor is placed in a constant magnetic field, it experiences a force proportional to the current and produces proportional deflection torque. 

Description : Draw symbol of LED and explain it’s working principle.

Last Answer : Construction of LED: The basic structure of LED is shown in fig.(a). The active region exists between the p and n regions. The light emerges from the active side in all the directions when electron hole-pairs ... fig.(c). In this way an LED emits light. This is the principle of operation of LED.

Description : State working principle of photo diode. List out its three applications.

Last Answer : Diagram of photo diode :  Working principle of photo diode :  When photons of energy greater than 1.1 eV hit the diode, electron-hole pairs are created. The ... Smoke detector, Optical communication devices, Position sensors, Bar code scanners, Automotive devices, Surveying instruments

Description : What are the working principles of generator main protections?

Last Answer : GENERATOR START UP PROTECTIONS SUPPLEMENTARY PROTECTION OF GENERATOR The generator is normally expected to run rated speed before excitation power is applied by closing the field breaker. ... position to ensure that the protection is inoperable when the machine is connected to grid.  

Description : What are the isolations required for working on IPBD/ Generator?

Last Answer : a. Generator field breaker open and tagged. b. GT breaker open and earth switch closed.  c. Barring gear motor stopped and tagged. d. Generator PT's isolated and tagged. e. CB 472 and CB 474 open ... 's are isolated and tagged. f. Before doing any work on brush gear 64F1 relay to be taken out.