What is Instrumentation Fittings?

1 Answer

Answer :

Instrumentation FittingsTube FittingsThere are four primary styles of high to low pressure tube fittings. They are differentiated by their end connections and applications, each having its own advantages and disadvantages.Compression Fittings: Slide over the tube and use a ferrule design to coin and seal on the OD of the tube.Cone and Thread Fittings (C&T): Tube ends are coned (chamfered) and threaded. The threads allow for positive lock and sealing of the end face of tube to the fitting body.Butt Weld Fittings: Permanently joins to the tube end by welding the surrounding metal at the tube end with the fitting.Push-To-Connect Pneumatic Fittings: Instant connections just by pushing the tube into the fitting.For most pressure applications (up to 15,000 PSI) fitting sizes are specified by the

Related questions

Description : Where are the grease fittings for 2011 ford escape?

Last Answer : Feel Free to Answer

Description : What is the application and use of a range of electrical components Such as plugs switches sockets lighting and fittings junction boxes consumer units.?

Last Answer : Need answer

Description : Is there a difference between gray and white PVC piping and fittings?

Last Answer : The only difference between gray and white PVC piping is in the color. They're both PVC.

Description : PVC Fittings?

Last Answer : form_title= PVC Fittings form_header= Make DIY a snap with PVC fittings. How many fittings do you need?*= {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, More than 10} What size PVC do you need?*= _ [50] What will you be using the PVC for?*= _ [50]

Description : What are the types of Pipe fittings?

Last Answer : Pipe Fittings are Piping component that helps in Changes the direction of the flow such as elbows, tees. Changes the size of the pipe such as reducers, reducing tees. Connect different components such ... Thredolet, Nipolet, Letrolet, Swepolet), Steam Traps, Long Radius Bend, Flanges and Valve etc.

Description : How are Forged Pipe Fittings Made?

Last Answer : Pipe Fittings are Plumbing materials that support the course of flow in Adjustments such as elbows, tees. Changes the size of the tubing, for instance reducers, raising tees. Link different components ... fittings (Socket Weld and Threaded) are created in compliance with the standards of ASME (Am

Description : What manufacturing processes were applied to SS Forged Fittings?

Last Answer : There are four processes of manufacturing a SS forged fittings. First is Mandrel method, as the name suggests a curved mandrel is inserted into a length of pipe. Extrusion Method consists of a machine that ... a piece of pipe goes through a mould of the fittings and come out in the needed shape.

Description : What are some brand names for bathroom fittings?

Last Answer : Neat and Clean bathrooms with Modern bath fittings and design play a wonderful role in rendering pleasant and sumptuous bathing feel on relaxed weekends and hectic mornings. Various types of bathroom ... , your bathroom can be functional and beautiful in equal measure.some of the important bath

Description : What types of lighting fittings are used in the battery room?

Last Answer : Flame proof acid resistant  

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

Description : Actual lift of a pump is always less than the theoretical lift and is limited by the (A) Specific gravity & temperature of the liquid (B) Leakage & pressure decreasing at higher elevations (C) Frictional resistance through pipes, fittings & passages (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Pick up the correct statement from the following: (A) All pipes and fittings are classified according to their diameters (B) The diameter of the pipes is the nominal diameter of internal bore (C) All pipes are measured along the centre line of the pipes in metres (D) All the above

Last Answer : (D) All the above

Description : Cost of fittings and their fixing is specified for the following sanitary fittings (A) Water closets (B) Flushing pipes (C) Lavatory basins (D) All the above

Last Answer : (D) All the above

Description : What Are The Different Types Of Tools Used In Pipe Fittings?

Last Answer : Generally tools used in pipe fittings are Pipe vice, Pipe wrench, Pipe die, Pipe tap, Chain wrench, Chisel, Hammer, Reamer and Pipe cutter.

Description : What is the required duration of hydrotest for fittings NPS 10’’ and larger? a) 1 minute b) 2 minutes. c) 3 minutes. d) 5 minutes.

Last Answer : c) 3 minutes.

Description : What is the required duration of hydrotest for fittings NPS 2½ “thru 8"? a) 1 minute b) 2 minutes. c) 3 minutes. d) 5 minute

Last Answer : b) 2 minutes.

Description : Which of the following is required to be hydrostatically tested per ASME B31.3? a) Flanges. b) Flanged fittings. c) Flanges and flanged fittings. d) There is no hydrostatic testing requirement in ASME B16.5.

Last Answer : b) Flanged fittings.

Description : Is it permissible to install tapped holes in fittings per ASME B16.5 a) No. b) Yes. c) Yes, if the metal is thick enough to allow the required thread length. d) Yes, as permitted by ASME B16.20.

Last Answer : c) Yes, if the metal is thick enough to allow the required thread length.

Description : Flanges and flanged fittings may be constructed of which of the following materials? a) Castings. b) Forgings. c) Plate. d) All of the above.

Last Answer : d) All of the above.

Description : How are reducing fittings designated in size? a) By the smaller size. b) By the larger size. c) By sizes. d) They are not designated by size, just class.

Last Answer : c) By sizes.

Description : When flanges and flanged fittings meet the requirements for multiple materials and are marked for multiple materials and are marked in accordance with ASME B16.5, which of the following pressure rating may be ... . g) The highest must be used. h) Flanges may only meet one material specification.

Last Answer : e) Any applicable pressure rating.

Description : What pressure does ASME B16.5 limit flanged fittings to during system hydrostatic testing? a) 1.5 times the 100°F pressure rating, rounded to next highest 25psi. b) 1.5 times the flange class. c) The maximum pressure rating for the flange. d) The flange class plus 250psi.

Last Answer : a) 1.5 times the 100°F pressure rating, rounded to next highest 25psi. b) 1.5 times the flange class.

Description : When flanged fittings are to be used at temperatures below -20°F, what pressure rating is to be used? a) The pressure rating at the actual service temperature, found by interpretation. b) The pressure ... to the flange class. d) Flanges complying with ASME B16.5 may not be used below -20°F.

Last Answer : b) The pressure rating at -20°F.

Description : Can a manufacturer or contractor use flanges or fittings made in conformance to an earlier edition ASME B16.5 on a current project? a) No. a) b) Yes. b) Yes, if in conformance with the current edition of ASME B16.5. c) Yes, if permitted by the owner-user.

Last Answer : b) Yes, if in conformance with the current edition of ASME B16.5.

Description : What size piping flanges and flanged fittings are addressed by ASME B16.5? a) 1/2" to 24" NPS. b) 1" to 36" NPS. c) 1/4" to 36" NPS. d) 1/4 to 48" NPS.

Last Answer : a) 1/2" to 24" NPS.

Description : Which of the following assets are dealt with by AS - 10 (Accounting Standard on Fixed Assets)? A. Land, building, plant and machinery, vehicles, furniture and fittings B. Goodwill and patents C. Trademarks and designs D. All of the above

Last Answer : D. All of the above

Description : How are fittings produced and where are they used?

Last Answer : The technology for the production of steel reinforcement is determined by the requirements of GOST. Rebar can be produced in several ways: drawing, rolling, deformation. Drawing is an uneconomical ... can be easily moved around the construction site as the equipment is supplied with wheels.

Description : On electrical generators one of the bearings is isolated from the bedplate. This insulating block should not be painted and must be kept clean to ___________. A. protect operating personnel from shock ... the prime mover as it warms up D. eliminate shaft currents to prevent damaging the bearings

Last Answer : Answer: D

Description : List the applications of instrumentation amplifier.

Last Answer : a. Temperature indicator b. Temperature controller c. Light intensity meters d. Water flow meter c. Thermal conductivity meter f. Analog weight scale

Description : List the features of instrumentation amplifier:

Last Answer : 1.High gain accuracy 2.High CMRR 3.High gain stability with low temperature co-efficient 4Low dc offset 5.Low output impedance

Description : What is the need for an instrumentation amplifier?

Last Answer :  In a number of industrial and consumer applications, the measurement of physical quantities is usually done with the help of transducers. The output of transducer has to be amplified So that it can drive the indicator or display system. This function is performed by an instrumentation amplifier.

Description : What are the classifications of industrial instrumentation?  

Last Answer : a. Information gathering instrumentation. b. Regulating instrumentation. c. Protective instrumentation. 

Description : What are the three areas of expertise of a Center of Excellence? A. Instrumentation / Analysis / Recommendations B. Business Outcomes and Actions / Enabling Capabilities / Analysis C. Instrumentation / Enabling Capabilities / Analysis D. None of the abov

Last Answer : B. Business Outcomes and Actions / Enabling Capabilities / Analysis

Description : Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost. (A) 5 to 10 (B) 20 to 30 (C) 40 to 50 (D) 60 to 70

Last Answer : (B) 20 to 30

Description : What Is Instrumentation Measurement?

Last Answer : Instrumentation can be used to measure certain field parameters (physical values): These measured values include: * pressure, either differential or static * flow * temperature - ... frequency * resistivity * conductivity * chemical composition * chemical properties * various physical properties

Description : What Is Instrumentation Control?

Last Answer : In addition to measuring field parameters, instrumentation is also responsible for providing the ability to modify some field parameters. Some examples include: Device Field Parameter(s) Valve Flow, Pressure Relay Voltage, Current Solenoid Physical Location, Level Circuit breaker Voltage, Current.

Description : What Is Instrumentation Instrumentation Engineering?

Last Answer : Instrumentation engineering is the engineering specialization focused on the principle and operation of measuring instruments which are used in design and configuration of automated systems in electrical ... the goal of improving system productivity, reliability, safety, optimization and stability.

Description : What Is Instrumentation?

Last Answer : The technology which is used to measured and control the process system of plant is called instrumentation. It is branch of engineering.

Description : Which of the two types of magnetic tape is used to record audio and instrumentation type signals in the VLF to 2.5MHz frequency range?

Last Answer : Analog magnetic tape.

Description : What format of digital tape recording is normally used to record instrumentation or telemetry data?

Last Answer : Serial digital magnetic tape recording.

Description : Instrumentation amplifier employs how many opamps

Last Answer : 3

Description : What is the cause of the apical periodontitis after extirpation and instrumentation and temporarely dressing. a. entrapped Bacteria. b. Chemical irritation of the solutions. c. Mechanical irritation of the instruments. d. One or any combination of the above.

Last Answer : d. One or any combination of the above.

Description : After completing pulp extirpation, debridement and placing a dressing; apical periodontitis is because: A. Over instrumentation extending into periapical area B. Irritation from chemicals used C. Entrapped bacteria D. One or any combination of the above

Last Answer : D. One or any combination of the above

Description : Which of the following in not one of the key threats to internal validity? a. Maturation b. Instrumentation c. Temporal change d. History

Last Answer : c. Temporal change

Description : Which of the following refers to any systematic change that occurs over time in the way in which the dependent variable is assessed? a. Instrumentation b. Maturation c. Testing d. Selection

Last Answer : a. Instrumentation

Description : Which one refers to physical or mental changes that may occur within individuals over time, such as aging, learning, boredom, hunger, and fatigue? a. Instrumentation b. History c. Maturation d. Testing

Last Answer : c. Maturation

Description : Write any two applications of Instrumentation System.

Last Answer :  Instrumentation is used to measure many parameters (physical values). These parameters include: Pressure,either differential or static Flow Temperature Levels of liquids, etc. ... Inductance Capacitance Resistivity Chemical composition Chemical properties Position Vibration

Description : Draw the block diagram of instrumentation system and explain function of each block. 

Last Answer : Functions of each block: Primary sensing element: This first receives energy from the measured medium and produces an output depending on measured quantity. Variable conversion element: Converts ... indication of a pointer moving a scale or the recording of a pen Moving over chart.

Description : List and explain the types of instrumentation is provided for safe plant operation.

Last Answer : Instrumentation provided for safe plant operation: After understanding various types of chemical hazards in foregoing parts, we should process to know instruments, equipment and other control measure. To ... poisonous /explosive gases, various type of glass detector hand models are also available.