Processor’s speed of a computer is measured in (1) BPS (2) MIPS (3) Baud (4) Hertz

2 Answers

Answer :

MIPS

Answer :

Million instructions per second (MIPS)

Related questions

Description : Which of the following Unit can be used to measure the speed of a computer? A. BAUD B. SYPS C. MIPS D. None of the Above

Last Answer : C. MIPS

Description : An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & ... (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Last Answer : (D) 1000 bauds \ sec & 4000 bps Explanation: Bit rate is the number of bits per second. Baud rate is the number of signal units per second. Baud rate is less than or equal to the bit rate. Baud rate = 1000 bauds per second (baud/s) Bit rate = 1000 x 4 = 4000 bps

Description : An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above

Last Answer : (B) 3 bits/baud

Description : CPU speed of a personal computer is A) 32 KIPS B) 100 KIPS C) 1 MIPS D) None of these

Last Answer : Answer : B

Description : CPU speed of a personal computer is- 1) 32 KIPS 2) 100 KIPS 3) 1 MIPS 4) None of these

Last Answer : 2) 100 KIPS

Description : A term associated with the comparison of processing speed is 1) FFTS 2) MPG 3) MIPS 4) CPS

Last Answer : 3) MIPS

Description : Which is most commonly measured in terms of MIPS previously million instruction per second: a. Microprocessor b. Performance of a microprocessor c. Assembly line d. None of thes

Last Answer : b. Performance of a microprocessor

Description : The refresh rate of monitor is measured in _______ A. byte B. seconds C. Hertz D. None of the Above

Last Answer : C. Hertz

Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) BaudC) Bits per second D) Both B and C

Last Answer : B) Baud

Description : The Width of a processor’s data path is measured in bits. Which of the following are common data paths? A) 8 bits B) 12 bits C) 16 bits D) 32 bits

Last Answer : Answer : A

Description : A term associated with the comparison of processing speeds of different computer system is: A) EFTS B) MPG C) MIPS D) CPS

Last Answer : Answer : C

Description : A term associated with the comparison of processing speeds of different computer systems is: a) EFTS b) MPG c) MIPS d) None of The Above

Last Answer : c) MIPS

Description : What is the commonly used unit for measuring the speed of data transmission ? (1) Mega Hertz (2) Characters per second (3) Bits per second (4) Nano seconds

Last Answer : Bits per second 

Description : Name the quantities which are measured by the following units. (i) Newton (ii) Joule (iii) Watt (iv) Volt (v) Light year (vi) Angstrom (vii) Acre-foot (viii) Becquerel (ix) Hertz (x) Cusec

Last Answer : Answers: (i) Force (ii) Work Energy (iii) Power of electricity (iv) Potential difference (v) Distance of stars and planets (vi) Length (vii) Volume (viii) Radioactivity (ix) Frequency (x) Rate of flow of water

Description : Pick up the correct statement from the following: (A) Frequency is the number of wave crests passing a fixed point in one second (B) Frequency of a wave is measured in Hertz (Hz) (C) Amplitude of a wave is the height of its crust from the mid-point (D) All of these

Last Answer : Answer: Option D

Description : Noise Pollution is measured in a) Hertz b) Fathoms c) Manometers d) Decibels. 

Last Answer : d) Decibels.

Description : Conductance is measured in: A. Henries B. Mhos C. Hertz D. Watts

Last Answer : Conductance is measured in: Mhos

Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C

Last Answer : B) Baud

Description : The Width of a processor’s data path is measured in bits. Which of the following are common data paths? a. 8 bits b. 12 bits c. 16 bits d. 32 bits

Last Answer : a. 8 bits

Description : The Width of a processor’s data path is measured in bits. Which of the following are common data paths? a. 8 bits b. 12 bits c. 16 bits d. 32 bits

Last Answer : a. 8 bits

Description : Explain the speed of 9600 bps . ?

Last Answer : 9600 bps Speed ​​is the voice band. 9600 bps means 9600 bits of data is transferred per second . Voice bands typically transfer data up to 9600 bps . This bandwidth is used in telephone lines. This bandwidth is also used to transfer data to computers and peripheral devices.

Description : ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits ... and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps

Last Answer : C. 320 bps

Description : Usually, it takes10-bits to represent one character. How many characters can betransmittedat a speed of 1200 BPS? A. 10 B. 12 C. 120 D. 1200 E. None of the above

Last Answer : 120

Description : In a token ring network the transmission speed is 10^7 bps and the propagation speed is 200 metres/micro second. The 1- bit delay in this network is equivalent to: a. 500 metres of cable. b. 200 metres of cable. c. 20 metres of cable. d. 50 metres of cable

Last Answer : c. 20 metres of cable.

Description : A term associated with the comparison of processing speeds of different computer system is: a. EFTS b. MPG c. MIPS d. CPS

Last Answer : MIPS

Description : A term associated with the comparison of processing speeds of different computer system is: a. EFTS b. MPG c. MIPS d. CFPS

Last Answer : c. MIPS

Description : A term associated with the comparison of processing speeds of different computer system is: a. EFTS b. MPG c. MIPS d. CPS

Last Answer : c. MIPS

Description : A term associated with the comparison of processing speeds of different computer system is: a. EFTS b. MPG c. MIPS d. CFPS

Last Answer : c. MIPS

Description : How many types of computer processors ?

Last Answer : In English , Central Processing Unit (CPU) in Bengali , Central Processing Unit. Which is called a Canadian processor or main processor. Electronic circuitry within a computer that consists of basic ... components from the main components of the computer such as main memory and IO circuitry.

Description : Which computer support co-processors? A) XT computer B) AT computers C) None of these D) Both of these

Last Answer : Answer : B

Description : Computer systems are comprised of: a) Hardware, Software, Procedures, Networks and People b) Hardware, Programs, Processors, Procedures and People c) Hardware Programs, Information, People and Networks d) None of These

Last Answer : a) Hardware, Software, Procedures, Networks and People

Description : Computer systems are comprised of a) hardware, programs, processors, procedures and people b) hardware, programs, information, people and procedures c) hardware, programs, information, people and networks d) hardware, software, procedures, networks and people e) None of these

Last Answer : d) hardware, software, procedures, networks and people

Last Answer : MIPS - Million Instructions per Second

Description : which are of the following modern assemblers: a. MIPS b. Sun SPARC c. HP PA-RISC d, x86(x64) e. all of these

Last Answer : e. all of these

Description : Full form of MIPS assembler is: a. Microprocessor without interlocked pipeline stage b. Microprocessor with interlocked pipeline stage c. Botha &b d. None of these

Last Answer : a. Microprocessor without interlocked pipeline stage

Description : What are the five steps in MIPS instruction execution?

Last Answer : 1. Fetch instruction from memory. 2. Read registers while decoding the instruction. The regular format of MIPS instructions allows reading and decoding to occur simultaneously. 3. Execute the operation or calculate an address. 4. Access an operand in data memory. 5. Write the result into a register.

Description : What are the floating point instructions in MIPS?

Last Answer : MIPS supports the IEEE 754 single precision and double precision formats with these instructions: Floating-point addition Floating-point subtraction Floating-point multiplication Floating-point division Floating-point comparison Floating-point branch

Description : The ambulance is moving toward you and your sound technology measures the pitch at 645 hertz. The speed of the ambulance is therefore ______ m/s.?

Last Answer : *this is the full question not the answer* Suppose you’re standing on a sidewalk and down the street is an ambulance parked; it’s siren is a 600 Hz sound like it louder, Quieter, louder, quieter ... do use the facts given above to answer this:The ambulance is moving toward you and your sound te

Description : A turbogenerator has a rated output of 1200 KW at 60 Hertz, with a no load frequency of 61.5 Hertz. What is its speed droop? A. 1.03% B. 1.50% C. 2.44% D. 2.50%

Last Answer : Answer: D

Description : A four-pole 60-hertz induction motor has a synchronous speed of 1800 RPM and a slip of 4 percent at full load. What will be its full load speed? A. 1728.0 RPM B. 1730.7 RPM C. 1800.0 RPM D. 1872.0 RPM

Last Answer : Answer: A

Description : If there is a reduction in the normally supplied frequency to a 120/240 volt, threephase AC current motor from 60 hertz to 55 hertz, the motor would _____________. A. run at a slower speed B. operate at a lower current C. overheat D. trip off the line

Last Answer : Answer: A

Description : The output voltage of a 440 volt, 60 hertz, AC generator is controlled by the _____________. A. prime mover speed B. exciter output voltage C. load on the alternator D. number of poles

Last Answer : Answer: B

Description : The speed at which a wave propagates down a string is 300 meters per second. If the frequency of this wave is 150 Hertz, what is the wavelength of this wave?

Last Answer : ANSWER: 2 METERS

Description : What is the maximum clock speed of P III processors a. 1.0 GHz b. 1.1 GHz c. 1.2 GHz d. 1.3 GHz

Last Answer : b. 1.1 GHz

Description : In the case of parallelization, Amdahl's law states that if P is the proportion of a program that can be made parallel and (1-P) is the proportion that cannot be parallelized, then the maximum speed-up that can be achieved by using N processors is ... ((N-1)P+P) (C) 1/((1-P)+P/N) (D) 1/(P+(1-P)/N)

Last Answer : (C) 1/((1-P)+P/N)

Description : Which of the following are the best units of data on an external storage device? A) Bits B) Bytes C) Hertz D) Clock cycles

Last Answer : Answer : B

Description : Which of the following are the best units of data on an external storage device? 1) Bits 2) Bytes 3) Hertz 4) Clock cycles

Last Answer : 2) Bytes

Description : What is the commonly used unit for measuring the sped of data transmission? 1) Bits per second 2) Nano seconds 3) Characters per second 4) Mega Hertz

Last Answer : 1) Bits per second