What are the signals that inform the operating system that some activity has taken place, called ? (1) Informers (2) Interrupts (3) Events (4) Handlers

1 Answer

Answer :

Handlers

Related questions

Description : Classify Interrupts On The Basis Of Signals. State Their Differences.?

Last Answer : Answer :On the basis of level the signals can be classified into the following types: Single level interrupts Multi level interrupts The differences between them are as follows: For single the ... multi level it is not necessary. Single level interrupts are much slower than multi level interrupts.

Description : In the process of buying routinely purchased items, buyers are sometimes also the A)deciders. B)gatekeepers. C)users. D)influencers. E)informers.

Last Answer : A)deciders.

Description : ----------- maintains self developed network of outside contacts and informers who provide favors and information. (a) Entrepreneur ; (b) Monitor ; (c) Liaison ; (d) Figurehead

Last Answer : (c) Liaison ;

Description : The object of ‘Agenda’ is to inform– (A) About the profitability and activity (B) About the progress of company (C) About the matter in sequence to be discussed in the meeting (D) About the routine matters

Last Answer : Answer: About the matter in sequence to be discussed in the meeting

Description : What type of control pins are needed in a microprocessor to regulate traffic on the bus, in order to prevent two devices from trying to use it at the same time? A) Bus control B) Interrupts C) Bus arbitration D) Status

Last Answer : Answer : C

Description : Interrupts which are initiated by an I/O drive are ___________ A. internal B. external C. Both (A) and (B) D. All of the above

Last Answer : B. external

Description : Interrupts that are initiated by an instruction are_______ A. internal B. external C. hardware D. software

Last Answer : D. software

Description : Who do I write to about getting all food handlers in restaurants to wear gloves?

Last Answer : The Department of Health and Human Services

Description : What is A food handler's duties regarding food safety include all of the following except?

Last Answer : Need answer

Description : Why are food handlers are required to wash their hands with water that is 100?

Last Answer : So it can be 100% clean ;)

Description : What factors prevent food contamination by food handlers?

Last Answer : Feel Free to Answer

Description : Do restaurants require all of their employees to have a food handlers card?

Last Answer : This varies from state to state and county to county. Each restaurant needs to be responsible for knowing which employees may need to have a food handlers card.

Description : Where can I get an online food handlers card?

Last Answer : You can get a food handlers card at the following sites I found for you to look at. www.orfoodhandlers.com/ ,www.cafoodhandlers.com/ ,www.doh.wa.gov ... Food Food Worker and Industry

Description : Where can I get info on what it takes to get a food handler's permit?

Last Answer : To get a food handler's permit you must first learn how to handle the food and a sanitized manner, there are many courses online of which can teach you the art of food handling.

Description : What are the requirements for food handlers card?

Last Answer : To find out what you need to do to get a food handlers card, check out the following websites....www.calrest.org/foodhandler/ and www.ccdeh.com/.../707-California-food-handler-guidelines-april-201...

Description : How do I get a food handlers permit?

Last Answer : Food handlers permit is really easy to get. You can find online videos and classes as well as at your local community college or adult school. Normally a pass is pretty cheap too.

Description : _______ disease develops on the hands or feet. Sores on the skin become infected with Mycobacterium marinum in polluted water or in infected fish. a. Fish handlers b. Cholera c. Cowpox d. Rotovirus e. Coxsackie

Last Answer : a. Fish handlers

Description : Have you ever known someone who interrupts every conversation to turn the focus back on themselves?

Last Answer : When I talk to someone that does that, after a few sentences of it happening I pretty much stop talking. If I do continue, it will be small talk.

Description : In the event of a catastrophe that interrupts availability of insulin for a long period of time what should a diabetic do to stay alive and healthy?

Last Answer : I would probably not eat much at all and when I did it would be low glycemic index foods.I would stay active and drink as much water as possible.I might try to supplement with chromium ,vanadium and ... resitance.Other than that,there isn't much one can do and death would be inevitable.I am Type1.

Description : Would You would use the imperfect tense to talk about an action that interrupts another?

Last Answer : We don't use the name imperfect tense in English. The imperfect is a verb form, found in various languages, which combines past tense and imperfective aspect. It can therefore have meanings ... action is was walking, the action that interrupted the longer action is tripped which is past simple

Description : Would You would use the imperfect tense to talk about an action that interrupts another?

Last Answer : We don't use the name imperfect tense in English. The imperfect is a verb form, found in various languages, which combines past tense and imperfective aspect. It can therefore have meanings ... action is was walking, the action that interrupted the longer action is tripped which is past simple

Description : What are the functions of interrupts?

Last Answer : Inform the CPU of the occurrence of external asynchronous events or the presence of external unpredictable conditions, so that the CPU can execute a routine to respond appropriately and promptly.

Description : How many interrupts does 8085 have, mention them

Last Answer : The 8085 has 5 interrupt signals; they are INTR, RST7.5, RST6.5, RST5.5 and TRAP

Description : Explain priority interrupts of 8085.

Last Answer : The 8085 microprocessor has five interrupt inputs. They are TRAP, RST 7.5, RST 6.5, RST 5.5, and INTR. These interrupts have a fixed priority of interrupt service. If two or more interrupts go ... 8085 is shown in the table. Interrupts Priority TRAP RST 7.5 RST 6.5 RST 5.5 INTR

Description : The method which offers higher speeds of I/O transfers is ___________ a) Interrupts b) Memory mapping c) Program-controlled I/O d) DMA

Last Answer : DMA

Description : The method of synchronising the processor with the I/O device in which the device sends a signal when it is ready is? a) Exceptions b) Signal handling c) Interrupts d) DMA

Last Answer : Interrupts

Description : What are various interrupts supported by TMS 320 c54 processor?

Last Answer : The C54x DSP supports both software and hardware interrupts: ✔ A software interruptis requested by a program instruction (INTR, TRAP,or RESET) ✔ A hardware interrupt is requested by a ... interrupt ports. ✔ Internal hardware interrupts are triggered by signals from the on-chip peripherals.

Description : Interrupts which are initiated by an I/O drive are a. internal b. external c. software d. all of above

Last Answer : b. external

Description : Interrupts which are initiated by an instruction are a. internal b. external c. hardware d. software

Last Answer : b. external

Description : Interrupts which are initiated by an instruction are a. internal b. external c. hardware d. software

Last Answer : d. software

Description : The number of software interrupts in 8085 is ____ a) 5 b) 8

Last Answer : b) 8

Description : What type of control pins are needed in a microprocessor to regulate traffic on the bus, in order to prevent two devices from trying to use it at the same time? a. Bus control b. Interrupts c. Bus arbitration d. Status

Last Answer : c. Bus arbitration

Description : Which is used to store critical pieces of data during subroutines and interrupts: a. Stack b. Queue c. Accumulator d. Data register

Last Answer : a. Stack

Description : 8086 is interfaced to two 8259s (Programmable interrupt controllers). If 8259s are in master slave configuration the number of interrupts available to the 8086 microprocessor is a) 8 b) 16 c) 15 d) 64

Last Answer : a) 8

Description : n 8086 microprocessor the following has the highest priority among all type interrupts. a) NMI b) DIV 0 c) TYPE 255 d) OVER FLOW

Last Answer : a) NMI

Description : In 8086, Example for Non maskable interrupts are a) Trapb) RST6.5 c) INTR

Last Answer : a) Trap

Description : What is meant by Maskable interrupts? a) An interrupt which can never be turned off. b) An interrupt that can be turned off by the programmer. c) none

Last Answer : b) An interrupt that can be turned off by the programmer.

Description : What are software interrupts? a) RST 0 - 7 b) RST 5.5 - 7.5 c) INTR, TRAP

Last Answer : a) RST 0

Description : What are level Triggering interrupts? a) INTR&TRAP b)RST6.5&RST5.5 c)RST7.5&RST6.5

Last Answer : b)RST6.5&RST5.5

Description : Which of the following is hardware interrupts? a) RST5.5, RST6.5, RST7.5 b) INTR, TRAP c) a & b

Last Answer : c) a & b

Description : Which of the following is not the function of Microkernel? A) File management B) Low-level memory management C) Inter-process communication D) I/O interrupts management

Last Answer : A) File management

Description : What type of control pins are needed in a microprocessor to regulate traffic on the bus, in order to prevent two devices from trying to use it at the same time? a. Bus control b. Interrupts c. Bus arbitration d. Status

Last Answer : c. Bus arbitration

Description : What Are The Two Major Differences Between Intr And Other Interrupts ( Hardware)?

Last Answer : Answer :The two major differences between INTR and the other hardware interrupts are as follows:All the hardware interrupts are vectored interrupts but the INTR interrupt is not so. An INTR interrupt will ... saved but in the case of other hardware interrupts the locations is saved in the stack.

Description : How Many Interrupts Are There In 8085?

Last Answer : Answer :There are 12 interrupts in 8085.

Description : What Are Software Interrupts?

Last Answer : Answer :RST0, RST1, RST2, RST3, RST4, RST5, RST6, RST7.

Description : What Are Hardware Interrupts?

Last Answer : Answer :TRAP, RST7.5, RST6.5, RST5.5, INTR.

Description : In What Way Interrupts Are Classified In 8085?

Last Answer : Answer :In 8085 the interrupts are classified as Hardware and Software interrupts.

Description : A job has four pages A, B, C, D and the main memory has two page frames only. The job needs to process its pages in following order: ABACABDBACD Assuming that a page interrupt occurs when a new page is brought in the main ... replacement algorithms are (A) 9 and 7 (B) 7 and 6 (C) 9 and 8 (D) 8 and 6

Last Answer : (C) 9 and 8

Description : The essential difference between traps and interrupts is (A) traps are asynchronous and interrupts are synchronous with the program (B) traps are synchronous and interrupts are asynchronous with the program ( ... synchronous and interrupts are asynchronous with the I/O devices. (D) None of these.

Last Answer : (B) traps are synchronous and interrupts are asynchronous with the program

Description : 8085 microprocessor has ............. hardware interrupts. (A) 2 (B) 3 (C) 4 (D) 5

Last Answer : (D) 5