What are the number of valence electrons of atoms in semiconductor?

What are the number of valence electrons of atoms in semiconductor?
by

1 Answer

Answer :

There are four valence electrons in the atom of a semiconductor.

by

Related questions

The number of electrons in the outer most orbit of carbon atom is?

Description : The number of electrons in the outer most orbit of carbon atom is?

Last Answer : The number of electrons in the outer most orbit of carbon atom is 4.

ATOMS FACTS

Description : ATOMS FACTS

Last Answer : There are three parts to an atom: protons, neutrons, and electrons. They each balance each other out so the atom doesn't break apart. There are over one hundred different kinds of atoms ... smaller particles called quarks and leptons. The human body replaces 98 percent of those atoms every year.

A substance whose molecules consist of dissimilar atoms is called?

Description : A substance whose molecules consist of dissimilar atoms is called?

Last Answer : A substance whose molecules consist of dissimilar atoms is called compound.

(i) Explain the process of diffusion in semiconductor material. (ii) Explain Hall effect.

Description : (i) Explain the process of diffusion in semiconductor material. (ii) Explain Hall effect.

Last Answer : (i) Diffusion: In a semi conductor bar a concentration gradient exist when either number of electrons or holes is greater in one region of a semi conductor as compared to other region. When ... to determine whether a semiconductor is N type or P type, and to find carrier concentration

fabrication of semiconductor device and describe its need.

Description : State any four materials used in fabrication of semiconductor device and describe its need.

Last Answer : For fabrication of semiconductor devices like transistors diode, solar cell etc. we have to make use of following types of materials  1. Substrate: o It is used for deposition of thin ... . o Metal cans and sealed glass containers satisfy the extreme requirements of space and military users.

State the impurities for obtaining p-type and n-type semiconductor from intrinsic semi conductor.

Description : State the impurities for obtaining p-type and n-type semiconductor from intrinsic semi conductor. 

Last Answer : Crystals of Silicon and Germanium are doped using two types of dopants:  1. The impurities for obtaining n-type semiconductor from intrinsic semiconductor are pentavalent impurity; like Arsenic (As), Antimony ... semiconductor are trivalent impurity; like Indium (In), Boron (B), Aluminum (Al), etc.

Which is a semiconductor: copper, silicon, or neon?

Description : Which is a semiconductor: copper, silicon, or neon?

Last Answer : Copper is a metal. Silicon is a semiconductor. Neon is inert gas.

Compare intrinsic and extrinsic semiconductor

Description : Compare intrinsic and extrinsic semiconductor

Last Answer : Intrinsic semiconductor Extrinsic Semiconductor Pure form of semiconductor Impure form of semiconductor No. electrons and holes are equal  No. of electrons and holes are not equal Electrical ... e.g. Ge, Si semiconductor e.g. p-type or n-type semiconductor

Why is an intrinsic semiconductor doped?

Description : Why is an intrinsic semiconductor doped?

Last Answer : Intrinsic semiconductor is doped in order to increase conductivity of semiconductor. Doping increases majority charge carries either electrons or holes and majority charge carriers responsible for electric current. 

what is semiconductor ?

Description : what is semiconductor ?

Last Answer : For simple understanding is that the semiconductor is a partially conductor and partially insulator which depends on the temperature of conductor.

Which have more free electrons: conductors or insulators?

Description : Which have more free electrons: conductors or insulators? 

Last Answer : Conductors have many free electrons whereas insulators have very few or none at all.

Do electrons flow from the anode to the cathode?

Description : Do electrons flow from the anode to the cathode?

Last Answer : electrons flow from cathode to anode because the electron has a negative charge and repels from the negatively charged cathode whilst also attracting to the positively charged anode.

What is the flow of electrons from one atom to another called?

Description : What is the flow of electrons from one atom to another called?

Last Answer : Electric current

What is the direction of the flow of electrons?

Description : What is the direction of the flow of electrons?

Last Answer : Electrons  flow    cathode   to   anode  or  in   an  oposite  direction  of   convection  current  flow  or  holes.

why current flows in opposite direction of electrons ?

Description : why current flows in opposite direction of electrons?

Last Answer : Hi team, the current flow is nothing but flow of electrons But the conventional direction I'd opposite to actual current flow . ..

In a single crystal of an intrinsic semiconductor, the number of free carriers at the Fermi level at room

Description : In a single crystal of an intrinsic semiconductor, the number of free carriers at the Fermi level at room temperature is: A) Half the total number of electrons in the crystal B) Zero C) Half the number of atoms in the crystal D) Half the number of free electrons in the crystal

Last Answer : In a single crystal of an intrinsic semiconductor, the number of free carriers at the Fermi level at room temperature is: Zero 

The substances which have a large number of free electrons and offer a low resistance are called?

Description : The substances which have a large number of free electrons and offer a low resistance are called?

Last Answer : The substances which have a large number of free electrons and offer a low resistance are called conductors.

At very high temperatures, extrinsic semiconductor becomes intrinsic semiconductor because

Description : At very high temperatures, extrinsic semiconductor becomes intrinsic semiconductor because (A) Of drive in diffusion of dopants & carriers. (B) Band to band transition dominates impurity ionization. (C) ... band to band transition. (D) Band to band transition is balanced by impurity ionisation.

Last Answer : At very high temperatures, extrinsic semiconductor becomes intrinsic semiconductor because Impurity ionization dominates band to band transition.

A snubber circuit is connected to the power semiconductor device to reduce the

Description : A snubber circuit is connected to the power semiconductor device to reduce the (A) turn-on time (B) turn-off time (C) electrical stresses (D) thermal resistance

Last Answer : A snubber circuit is connected to the power semiconductor device to reduce the electrical stresses

The Semiconductor strain gauges typically have much higher gauge factors than those of metallic strain

Description : The Semiconductor strain gauges typically have much higher gauge factors than those of metallic strain gauges, primarily due to : (A) higher temperature sensitivity (B) higher Poisson’s ratio (C) higher piezoresitive coefficient (D) higher magnetostrictive coefficient

Last Answer : The Semiconductor strain gauges typically have much higher gauge factors than those of metallic strain gauges, primarily due to : higher piezoresitive coefficient

Categories of semiconductor components (Integrated circuit families)

Last Answer : Categories of semiconductor components (Integrated circuit families) Integrated circuits are made from semiconductor material These are divided into three main categories A) ... minus, true or false etc. common families include Transistor Transistor Logic (TTL), CMOS, MOSFET.

What is the choice of size and number of generator units in interconnected power system?

Description : What is the choice of size and number of generator units in interconnected power system?

Last Answer : Choice of Size and Number of Generating Units: 1. The size/rating and number of generating units in such way that they approximately match with the load curve as closely as possible. 2. In ... , if power plant is connected to grid system then generating unit of higher capacity can be installed.

The number of loop equations required to completely analysing a network comprising of 8 independent

Description :  The number of loop equations required to completely analysing a network comprising of 8 independent branches and 6 nodes including the reference node shall be A) 3 B) 2 C) 4 D) 5 

Last Answer :  The number of loop equations required to completely analysing a network comprising of 8 independent branches and 6 nodes including the reference node shall be 3 

A connected graph has ‘5’ number of branches and ‘4’ number of nodes. It's rank is

Description :  A connected graph has ‘5’ number of branches and ‘4’ number of nodes. It's rank is A) 1 B) 2 C) 3 D) 4 

Last Answer :  A connected graph has ‘5’ number of branches and ‘4’ number of nodes. It's rank is 3 

Increasing the number of turns of wire on the secondary of a transformer will

Description : Increasing the number of turns of wire on the secondary of a transformer will  (A) Decrease the secondary current (B) Increase the primary current (C) Have no effect on the secondary current (D) Increase the secondary current

Last Answer : Increasing the number of turns of wire on the secondary of a transformer will Decrease the secondary current 

lt the length, number of turns and area of a coil are doubled, the inductance of the coil

Description : lt the length, number of turns and area of a coil are  doubled, the inductance of the coil

Last Answer : lt the length, number of turns and area of a coil are  doubled, the inductance of the coil is quadrupled

What number is your Willpower?

Description : What number is your Willpower?

Last Answer : 10 but then I cheated so I don’t know… but I’m being honest about it so 10 or am I lying again… so definitely between 1 and 10

Then number of T-states of the instruction STA in 8085 microprocessor is

Description : Then number of T-states of the instruction STA in 8085 microprocessor is A) 10 B) 12 C) 13 D) 16 

Last Answer : Then number of T-states of the instruction STA in 8085 microprocessor is 13 

The number of terminals present in IGBT is

Description : The number of terminals present in IGBT is A) 2 B) 3 C) 4 D) 5

Last Answer : The number of terminals present in IGBT is 3

What is the Gray code word for the binary number 101011?

Description : What is the Gray code word for the binary number 101011?  (1) 101011 (2) 110101 (3) 011111 (4) 111110

Last Answer : What is the Gray code word for the binary number 101011?  (1) 101011 (2) 110101 (3) 011111 (4) 111110

The number of poles of 8/6 stepper motor can be :

Description : The number of poles of 8/6 stepper motor can be :

Last Answer : The number of poles of 8/6 stepper motor can be : 4

The number of independent equations to solve a network is equal to?

Description : The number of independent equations to solve a network is equal to?

Last Answer : The number of independent equations to solve a network is equal to the number of chords.

A number of forces acting at a point will be in equilibrium if?

Description : A number of forces acting at a point will be in equilibrium if?

Last Answer : The sum of the resolved parts in any two perpendicular directions are both zero

Build using minimum number of CMOS gates.

Description : Build using minimum number of CMOS gates. Three input NAND gate. Two input NOR gate Three input NOR gate Two input AND gate Two input OR gate

Last Answer : Three input NAND gate. Two input NOR gate Three input NOR gate Two input AND gate Two input OR gate

The number of brushes in a commutator depends on?

Last Answer : The number of brushes in a commutator depends on amount of current to be collected.

In lap winding, the number of brushes is always?

Last Answer : In lap winding, the number of brushes is always same as the number of poles.

What is the maximum number of circuit breakers in a panel?

Description : What is the maximum number of circuit breakers in a panel?

Last Answer : It depends on that which type of panel is this.

Intrinsic semiconductor material is characterized by a valence shell of how many electrons?

Description : Intrinsic semiconductor material is characterized by a valence shell of how many electrons? a) 1 b) 2 c) 4 d) 6

Last Answer : Intrinsic semiconductor material is characterized by a valence shell of 4 electrons.

Atoms of different elements have - (1) same atomic number and same electronic configuration (2) different atomic number and same eletronic configuration (3) different atomic number and different number of valence electrons (4) same number of electrons and neutrons

Description : Atoms of different elements have - (1) same atomic number and same electronic configuration (2) different atomic number and same eletronic configuration (3) different atomic number and different number of valence electrons (4) same number of electrons and neutrons

Last Answer : (3) different atomic number and different number of valence electrons Explanation: Each element's atoms have a different number of protons, neutrons, and electrons, which is why they have different ... Their reactivity also varies because of the number and activeness of the electrons in the atom.

Atoms of different elements have (1) same atomic number and same electronic configuration (2) different atomic number and same eletronic configu-ration (3) different atomic number and different number of valence electrons (4) same number of electrons and neutrons

Description : Atoms of different elements have (1) same atomic number and same electronic configuration (2) different atomic number and same eletronic configu-ration (3) different atomic number and different number of valence electrons (4) same number of electrons and neutrons

Last Answer : different atomic number and different number of valence electrons

atoms with low ionization energy give up their outer valence electrons with ease?

Description : atoms with low ionization energy give up their outer valence electrons with ease?

Last Answer : trueapex

What is the term used to describe the sharing of valence electrons between two or more atoms?

Description : What is the term used to describe the sharing of valence electrons between two or more atoms?

Last Answer : Covalent bonding.

Atoms with four valence electrons are good conductors. (A) True (B) False

Description : Atoms with four valence electrons are good conductors. (A) True (B) False

Last Answer : (B) False

In which material, valence electrons are tightly bounded to their parent atoms ?

Description : In which material, valence electrons are tightly bounded to their parent atoms ? (a) Conductor (b) Semiconductor (c) Insulator (d) Magnetic 

Last Answer : insulator(b)

An element used in semiconductors whose atoms have three valence electrons is

Last Answer : An element used in semiconductors whose atoms have three valence electrons is An acceptor.

_____ is an element used in semiconductors whose atoms have three valence electrons.

Last Answer : An acceptor is an element used in semiconductors whose atoms have three valence electrons.

Define: i) Valency ii) Valence electrons.

Description : Define: i) Valency ii) Valence electrons. 

Last Answer : Valency:- The number of electrons donated (lose) or accepted (gain) or shared by atom of an element in order to complete its octet & attain stability is called as Valency.  Valence electrons: ... in the outermost orbit of an atom determine the valency of an atom and hence called valence electrons. 

The number of electrons, present in the valence shell of carbon of carbanion bearing `-ve` charge, is:

Description : The number of electrons, present in the valence shell of carbon of carbanion bearing `-ve` charge, is:

Last Answer : The number of electrons, present in the valence shell of carbon of carbanion bearing `-ve` charge, is: A. 8 B. 7 C. 6 D. 4

The number of electrons present in the valence shell of carbon of `CH_(3)overset(+)(C)H_(2)` ion bearing `+ve` charge:

Description : The number of electrons present in the valence shell of carbon of `CH_(3)overset(+)(C)H_(2)` ion bearing `+ve` charge:

Last Answer : The number of electrons present in the valence shell of carbon of `CH_(3)overset(+)(C)H_(2)` ion bearing `+ve` charge: A. 8 B. 7 C. 6 D. 4