Can you convert analog signal to digital?
Show More
102 views
0 answers
asked
Mar 10, 2018
by
anonymous
.jpg)
What is the use of digital signal processing?
Show More
72 views
0 answers
asked
Mar 10, 2018
by
anonymous

Why digital signal processing is important?
Show More
74 views
0 answers
asked
Mar 10, 2018
by
anonymous
.jpg)
State two advantages of digital system over analog system.
Last Answer : 1. They are less susceptible to noise. 2. The effect of fluctuation in the characteristic of the components, ageing of components etc. is very small in digital circuits. 3. Digital circuits have capability of memory which makes them suitable for computers. 4. More accurate.
Show More
127 views
1 answer
asked
Jul 31, 2019
by
anonymous

Write any two advantages of digital energy meter.
Last Answer : Advantages of Digital Energy Meter: 1) Easy to read. 2) High accuracy 3) High resolution. 4) No frictional losses as there are no moving parts. 5) No requirement for external adjustments. 6) Large ... due to absence of moving parts. 7) Highly efficient. 8) Very much compact. 9) Good reliability.
Show More
91 views
1 answer
asked
Sep 5, 2018
by
anonymous

State two advantages of digital circuits.
Last Answer : Advantages of Digital Circuits: i) Digital circuits are easier to design. ii) Information storage is easy. iii) Accuracy and precision are greater. iv) Less affected by noise. v) Reliability is more
Show More
71 views
1 answer
asked
Sep 5, 2018
by
anonymous

Integration of step signal gives (A) Impulse signal. (B) Ramp function. (C) Parabola. (D) Square pulse.
Last Answer : Integration of step signal gives Ramp function.
Show More
128 views
1 answer
asked
Apr 28, 2018
by
anonymous

How does signal processing work?
Show More
74 views
0 answers
asked
Mar 10, 2018
by
anonymous

What are digital signals used for?
Show More
64 views
0 answers
asked
Mar 10, 2018
by
anonymous

.2.The period of a signal is 10ms. What is its frequency in kilohertz?
Last Answer : 100
Show More
7 views
1 answer
asked
Apr 15
by
anonymous


Explain Briefly What Happens When The Intr Signal Goes High In The 8085?
Last Answer : Answer :The INTR is a maskable interrupt for the 8085. It has the lowest priority and is also non vectored. When this INTR signal goes into the high state the following things occur / ... the processor saves the address of new instruction into the STACK and an interrupt service subroutine begins.
Show More
82 views
1 answer
.jpg)
State different types of electrical signal and draw all types of waveforms.
Last Answer : Types of electrical signals 1) Sine wave 2) Triangular wave 3) Square wave Waveforms
Show More
174 views
1 answer
asked
May 2, 2020
by
anonymous
.jpg)
basic characteristics of sound signal.
Last Answer : Level and loudness: The amplitude of a sound wave determines its loudness or volume. A larger amplitude means a louder sound, and a smaller amplitude means a softer sound. The loudness of a ... the reproducing system should be capable of handling the maximum and minimum power in the same ratio.
Show More
118 views
1 answer
asked
Sep 2, 2019
by
anonymous

What is the significance of signal conditioner? Explain the need of following in mechatronics system. i) Isolator ii) Filter iii) Amplifier iv) Data converter
Last Answer : Significance: Signal conditioning means manipulating an analog signal in such a way that it meets the requirements of the next stage for further processing. Signal inputs accepted by signal ... -frequency converters, current-to-voltage converters, current loop converters, and charge converters.
Show More
178 views
1 answer
asked
Aug 9, 2019
by
anonymous

List different methods of demodulation of FM signal.
Last Answer : Balanced Slope detection Ratio detector Foster Seeley discriminator Phase locked loop demodulator
Show More
77 views
1 answer
asked
Aug 3, 2019
by
anonymous

For a signal conditioner explain the terms linearization and signal conversion.
Last Answer : Definition : 1. linearization : Many primary elements produce nonlinear outputs and the signal must be linearized to produce a nearly ideal calibration. Specialized analog circuits such as offsetting circuits, ... signal. Even computer algorithms are also used. 2.Signal conversion :
Show More
64 views
1 answer
asked
Jul 21, 2019
by
anonymous

Analog signal
Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }
Show More
99 views
1 answer
asked
Jul 6, 2019
by
anonymous

If it takes a transmitted signal 1m sec to go up to the target and come back after reflection, how far is the transmitter from the target? A) 150 Km B) 150 m C) 15 Km D) 1500 m
Last Answer : If it takes a transmitted signal 1m sec to go up to the target and come back after reflection, how far is the transmitter from the target? A) 150 Km B) 150 m C) 15 Km D) 1500 m
Show More
194 views
1 answer
asked
Jun 18, 2018
by
anonymous

In 8085, whenever a signal is received at TRAP terminal, its program execution is transferred to a subroutine on address A) 0000 H B) 002C H C) 0024 H D) 0004 H
Last Answer : In 8085, whenever a signal is received at TRAP terminal, its program execution is transferred to a subroutine on address 0024 H
Show More
163 views
1 answer
asked
Jun 18, 2018
by
anonymous

If a signal band limited to fm is sampled at a rate less than 2fm, then the constructed signal will be A) Large in amplitude B) Small in amplitude C) Distorted D) Distortion less
Last Answer : If a signal band limited to fm is sampled at a rate less than 2fm, then the constructed signal will be Distorted
Show More
149 views
1 answer
asked
Jun 18, 2018
by
anonymous

The sampling rate to avoid aliasing for the signal m(t) = 100 cos 200ωt will be A) ≥1/25 sec B) ≥1/50 sec C) ≤1/25 sec D) ≤ 1/50 sec
Show More
102 views
0 answers
asked
Jun 18, 2018
by
anonymous

An energy signal has G(f) = 20. Its energy density spectrum is A) 20 B) 100 C) 400 D) 800
Last Answer : 400
Show More
134 views
2 answers
asked
Jun 18, 2018
by
anonymous

What is the Laplace transform of step signal of 5 units magnitude? A) 5s B) 5/s C) s/5 D) 1/s
Last Answer : What is the Laplace transform of step signal of 5 units magnitude? A) 5s B) 5/s C) s/5 D) 1/s
Show More
251 views
1 answer
asked
Jun 18, 2018
by
anonymous

The time base signal in Cathode Ray Oscilloscope (CRO) is (1) A square wave signal (2) A sawtooth signal (3) A triangular wave signal (4) A sinusoidal signal
Last Answer : 2 Saw tooth
Show More
1.2k views
2 answers
asked
May 1, 2018
by
anonymous

The standard for long distance analog signal transmission in process control industry is (A) 4-20 mV (B) 0-20 mA (C) 4-20 mA (D) 0-5 V
Last Answer : The standard for long distance analog signal transmission in process control industry is 4-20 mA
Show More
2.6k views
1 answer
asked
Apr 26, 2018
by
anonymous

What do you mean by signal processing?
Show More
68 views
0 answers
asked
Mar 11, 2018
by
anonymous

What is a signal in science?
Show More
80 views
0 answers
asked
Mar 11, 2018
by
anonymous

What do you mean by signal and system?
Show More
57 views
0 answers
asked
Mar 11, 2018
by
anonymous

Explain transformer isolated drive circuits providing both signal and power.
Show More
85 views
0 answers
asked
Mar 11, 2018
by
anonymous

What is the use of signal flow graph?
Show More
84 views
0 answers
asked
Mar 10, 2018
by
anonymous

Advantages of digital instruments
Last Answer : 1. They are having high input impedance, so there is no loading effect 2. They are having higher accuracy 3. An unambiguous reading is obtained 4. The output can be interfaced with external equipment 5. They are available in smaller size .
Show More
70 views
1 answer
asked
Aug 21, 2019
by
anonymous

what are the advantages of digital multimeter ?
Last Answer : Precise reading digital reading easy to use less losses due to no mechanical parts high efficiency small size compact can measure AC and DC voltage and current and resistance and can be use for continuity testing
Show More
107 views
1 answer
asked
Aug 18, 2017
by
anonymous

Are there any advantages to PVC windows?
Last Answer : Have you decided to change your windows to new ones and don't know where to start? Let's start with the fact that windows are a very important part of any house or apartment, thanks to ... Another thing you need to pay attention to when ordering is that the profile must meet all quality standards.
Show More
7 views
1 answer
asked
Mar 30, 2021
by
anonymous

What are the advantages of LED lamps?
Last Answer : What are the advantages of LED lamps? LED lamps have an advantage over fluorescent lamps in the first place in terms of environmental friendliness. Another reason for using LED lamps is ... advantages. Today, such lamps are used in everyday life, for industrial lighting and street lighting.
Show More
14 views
1 answer
asked
Mar 29, 2021
by
anonymous

State the four advantages of MIG welding.
Last Answer : Four advantages of MIG welding: 1. High quality welds can be produced much faster. 2. Flux is not used there is no chance for the entrapment of slag in the weld metal resulting in high quality ... of metals and alloys. 5. Least expensive and highly economic. 6. Little or no post welds cleaning.
Show More
73 views
1 answer
asked
Jan 2, 2021
by
anonymous

State 2 advantages of JFET over BJT.
Last Answer : Advantages of JFET over BJT: 1) High input impedance 2) Better thermal stability 3) Produce less noise 4) Smaller than BJT 5) Rugged in construction and simpler to fabricate 6) High degree of isolation between Input and Output.
Show More
233 views
1 answer
asked
Jun 24, 2020
by
anonymous

Advantages of LED over CFL.
Last Answer : Advantages of LED over CFL. 1) Efficiency: LED bulbs use close to a third of the amount of power CFL bulbs would use to produce the same amount of light. This makes them ... decorative to heavy duty industrial applications. 6) Maintenance: Smooth light and low maintenance compared to CFL
Show More
79 views
1 answer
asked
May 27, 2020
by
anonymous

State advantages and disadvantages of radial distributor system.
Last Answer : Advantages of radial distributor system: 1. Design of layout is simple. 2. Capital cost & Erecting cost is less as there is only one feeder. 3. Time required for completion of ... maintain supply to consumers when there is maintenance on feeder. 3. Voltage fluctuations are more.
Show More
418 views
1 answer
asked
May 22, 2020
by
anonymous

State the advantages of use of high voltage in transmission of Electric power.
Last Answer : Advantages: 1. As Transmission voltage increases, current decreases. 2. As current decreases, cross section of conductor decreases. 3. As cross section of conductor decreases, its ... high voltage transmission line, successful interconnection of transmission line is possible than low voltage.
Show More
92 views
1 answer
asked
May 22, 2020
by
anonymous

State the advantages of SMPS.
Last Answer : Advantages of SMPS: 1. High Efficiency, more than 94%. 2. Easy maintenance and servicing. 3. High modularity and redundancy. 4. Lower power dissipation. 5. Wide AC input voltage range. 6. Less cost.
Show More
73 views
1 answer
asked
May 21, 2020
by
anonymous

State any two advantages of MCB over Fuse. State the standard specifications of MCB available in the market.
Last Answer : Following advantages of MCB over Fuse: 1. No need of replacement of fuse wire. 2. Manually restore of supply is simple. 3. Fault understanding by visual inspection 4. More safe than fuse The standard specifications of ... 6A, 10A,16A,20A, 25A, 30A, 32A, 40A, 50A, 60A and 63A 6. 250V and 450 v
Show More
193 views
1 answer
asked
May 7, 2020
by
anonymous

State advantages of rotating field type alternators.
Last Answer : Advantages of Rotating Field Type Alternator: 1) For high-voltage alternator, large space is required to accommodate conductors with insulation, as high voltage is induced in them. If field poles are placed ... is kept rotating. 8) Rotating field is comparatively light and can run with high speed.
Show More
142 views
1 answer
asked
May 7, 2020
by
anonymous

State advantages of short pitch winding over full pitch winding in alternators.
Last Answer : Advantages of Short Pitch Winding over Full Pitch Winding in Alternators: 1) Short pitching reduces the amount of copper needed for end connection when compared with full pitched coil. 2) They ... reduced, thereby increasing the efficiency. 4) The power quality of generated emf is improved.
Show More
478 views
1 answer
asked
May 7, 2020
by
anonymous

State the advantages of cogeneration.
Last Answer : Advantages of co-generation: 1) Co-generation can meet both power & heat requirements. 2) Less cost than conventional generation. 3) Higher system efficiency due to energy wastage is highly ... reduces due to cogeneration plant is located in same premises. 10) It can maintain grid stability
Show More
99 views
1 answer
asked
May 3, 2020
by
anonymous

State advantages of MOSFET.
Last Answer : Advantages of MOSFET * MOSFETs provide greater efficiency while operating at lower voltages. * Absence of gate current results in high input impedance. * High switching speed. * They operate at lower ... due to lower resistance of channel. * They are easy to manufacture. * They are portable.
Show More
105 views
1 answer
asked
May 2, 2020
by
anonymous

What do you mean by active filter? State its advantages over passive filter . Define pass band & stop band with respect to filter.
Last Answer : Active Filter: Active Filter is formed by using active element along with the passive components. Advantages of Active filter over Passive filter: High value of pass band gain can be obtained. It is ... pass band. Stop Band Filter: The frequency range which is attenuated is known as stop band.
Show More
124 views
1 answer
asked
May 2, 2020
by
anonymous
.jpg)
How GTO is advantages over SCR
Last Answer : i) It is turned-off by negative gate pulse. ii) No commutation circuit required, reducing the cost, size, weight and volume of the circuit. iii) As commutation choke is not used, the associated acoustic ... turn off time permits high switching frequency. v) It has higher di/dt rating at turn-off.
Show More
711 views
1 answer
asked
Oct 13, 2019
by
anonymous

advantages and disadvantages of ICs.
Last Answer : Advantages of ICs: 1.The physical size of an IC is extremely small (generally thousand times smaller) than that of discrete circuits. 2. The weight of an IC is very less as compared to that of ... is high 3. Power dissipation is limited. 4. ICs are very delicate and need extra care while handling
Show More
87 views
1 answer
asked
Aug 19, 2019
by
anonymous

Enlist the advantages of Microcontroller
Last Answer : Advantages of microcontrollers: It is an integrated chip with all valuable components including RAM, ROM, I/O Ports. Cost reducing programs with simple circuitry. Inbuilt timers / ... Microcontrollers are cheap and very small in size. Programming of Microcontrollers is simple to learn
Show More
74 views
1 answer
asked
Aug 10, 2019
by
anonymous
