Which type of winding is used in 3 phase shell-type transformer ?

by

1 Answer

Answer :

 Sandwich type winding is used in 3 phase shell-type transformer.

by

Related questions

A shell-type transformer has?

Last Answer : A shell-type transformer has reduced magnetic leakage.

Primary winding of a transformer?

Last Answer : Primary winding of a transformer could either be a low voltage or high voltage winding.

Starting winding of a single phase motor of a refrigerator is disconnected from the circuit by means of a?

Last Answer : Starting winding of a single phase motor of a refrigerator is disconnected from the circuit by means of a magnetic relay.

In split phase motor main winding is of?

Last Answer : In split phase motor main winding is of thick wire placed at the bottom of the slots.

The running winding of a single phase motor on testing with meggar is found to be ground...

Description : The running winding of a single phase motor on testing with meggar is found to be ground. Most probable location of the ground will be?

Last Answer : The running winding of a single phase motor on testing with meggar is found to be ground. Most probable location of the ground will be at the slot edge where coil enters or comes out of the slot.

In a capacitor start motor, the phase displacement between starting and running winding can be nearly?

Last Answer : In a capacitor start motor, the phase displacement between starting and running winding can be nearly 90°.

In a split phase motor, the running winding should have?

Last Answer : In a split phase motor, the running winding should have low resistance and high inductance.

A _________ is used to measure the stator % winding temperature of the generator.

Description : A _________ is used to measure the stator % winding temperature of the generator.  (A) Thermocouple (B) Pyrometer (C) Resistance thermometer (D) Thermometer

Last Answer : A Resistance thermometer is used to measure the stator % winding temperature of the generator. 

In D.C. machines fractional pitch winding is used?

Last Answer : In D.C. machines fractional pitch winding is used to reduce the sparking.

A centrifugal switch is used to disconnect starting winding when motor has?

Last Answer : A centrifugal switch is used to disconnect starting winding when motor has picked up about 50 to 70 per cent of rated speed.

The damping winding in synchronous motor is generally used to?

Description : The damping winding in synchronous motor is generally used to?

Last Answer : The damping winding in synchronous motor is generally used to provide starting torque and prevent hunting.

Single phase transformer

Description : Single phase transformer

Last Answer : Single phase Transformer Transformer

State any four characteristics of core type transformer.

Description : State any four characteristics of core type transformer.

Last Answer : Characteristics of core type transformer: i) It has one window. ii) It has one magnetic circuit. iii) Core surrounds the winding. iv) Average length of core is more. v) Area of cross ... Better cooling for winding. vii) Mechnical strength is comparatively less. viii) Repair and maintenance is easy.

A certain transformer has 200 turns in the primary winding, 50 turns in the secondary winding and 120 volts

Description : A certain transformer has 200 turns in the primary winding, 50 turns in the secondary winding and 120 volts applied to the primary. What is the voltage across the secondary?  (A) 30 Volts (B) 480 Volts (C) 120 Volts (D) 60 Volts

Last Answer : A certain transformer has 200 turns in the primary winding, 50 turns in the secondary winding and 120 volts applied to the primary. What is the voltage across the secondary?  (A) 30 Volts (B) 480 Volts (C) 120 Volts (D) 60 Volts

The short circuit in any winding of the transformer is the result of?

Last Answer : The short circuit in any winding of the transformer is the result of impulse voltage.

does the high voltage side of Transformer winding have more number of turns?

Last Answer : yes High Voltage side of Transformer winding have more number of turns. and low voltage side of Transformer winding have less number of turns.

With a neat sketch explain working of 1 phase dynamometer type power factor meter.

Description : With a neat sketch explain working of 1 phase dynamometer type power factor meter.

Last Answer : Working of 1 phase dynamometer type power factor meter : The current coil is connected in series with load. Two pressure coils marked as A and B are connected across the supply terminals ... becomes stationary and the pointer shows steady deflection corresponding to the power factor of the load. 

Induction type single phase energy meters measure electric energy in?

Last Answer : Induction type single phase energy meters measure electric energy in kWh.

Which relays are used for phase faults on long line?

Last Answer : Impedance relays are used for phase faults on long line.

Which type of motor is used in lift?

Description : Which type of motor is used in lift?

Last Answer : Synchronous motor

What type of meter is used to measure current?

Description : What type of meter is used to measure current?

Last Answer : Ammeter

Explain construction and working principle of single phase transformer.

Description : Explain construction and working principle of single phase transformer.

Last Answer : A single phase transformers is an electrical device that accepts single-phase AC power and outputs single-phase AC. PRINCIPLE... The single-phase transformer works on the principle of ... and secondary windings. Thin steel laminations shall be employed to prevent power losses from the core.

A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage

Description : A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage regulation at 0.8 pf lagging would he

Last Answer : A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage regulation at 0.8 pf lagging would he 0.52

The stator of phase shifting transformer for use in conjunction with an A.C. potentiometer usually has a?

Last Answer : The stator of phase shifting transformer for use in conjunction with an A.C. potentiometer usually has a two-phase winding.

A phase shifting transformer is used in conjunction with?

Last Answer : A phase shifting transformer is used in conjunction with Drysdale potentiometer.

Cylindrical type transformer has:

Description : Cylindrical type transformer has:  (A) Single magnetic circuit (B) Double magnetic circuit (C) All of the above (D) None of the above

Last Answer : Cylindrical type transformer has: Single magnetic circuit

Transformer coupling introduces which type of distortion?

Description : Transformer coupling introduces which type of distortion?

Last Answer : Transformer coupling introduces Cross over distortion.

IDMT relays are used to protect the transformer against :

Description : IDMT relays are used to protect the transformer against :  (A) Internal short -circuits (B) Open circuits (C) External short circuits (D) Oil leakage

Last Answer : IDMT relays are used to protect the transformer against : External short circuits

The inverse definite mean time relays are used for over current and earth fault protection of transformer against?

Last Answer : The inverse definite mean time relays are used for over current and earth fault protection of transformer against internal short-circuits.

Damper winding is provided in 3 phase synchronous motors to :

Description : Damper winding is provided in 3 phase synchronous motors to :

Last Answer : Damper winding is provided in 3 phase synchronous motors to : provide starting torque and prevent hunting

The starting winding of a single-phase motor is placed in?

Last Answer : The starting winding of a single-phase motor is placed in stator.

If starting winding of a single-phase induction motor is left in the circuit, it will?

Last Answer : If starting winding of a single-phase induction motor is left in the circuit, it will draw excessive current and overheat.

In split-phase motor auxiliary winding is of?

Last Answer : In split-phase motor auxiliary winding is of thin wire placed at the top of the slots.

In the transformer which winding has got more cross-sectional area?

Last Answer : In the transformer low voltage winding has got more cross-sectional area.

Which winding in a transformer has more number of turns ?

Last Answer : High voltage winding in a transformer has more number of turns.

Which winding of the transformer has less cross-sectional area ?

Last Answer : High voltage winding of the transformer has less cross-sectional area.

For the parallel operation of single phase transformers it is necessary that they should have?

Last Answer : Necessary conditions required to be satisfied in order to ensure successful parallel operation of single phase transformers:  1. Only transformers having the same phase displacement between primary and secondary ... . 7. The phase sequence must be followed strictly on HV and LV side connection.

State advantages of short pitch winding over full pitch winding in alternators.

Description : State advantages of short pitch winding over full pitch winding in alternators. 

Last Answer : Advantages of Short Pitch Winding over Full Pitch Winding in Alternators: 1) Short pitching reduces the amount of copper needed for end connection when compared with full pitched coil. 2) They ... reduced, thereby increasing the efficiency. 4) The power quality of generated emf is improved. 

What is armature winding?

Last Answer : It is the wire wound around a aluminium metal it is found commonly in transformers or motors

Damper winding in a synchronous motor

Description : Damper winding in a synchronous motor

Last Answer : Damper winding in a synchronous motor Serves to start the motor.

A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance

Description : A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is

Last Answer : A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is 36 Ohm

A 36 slot, 4 -pole, dc machine has a simplex lap winding with two conductors per slot. The back pitch and

Description : A 36 slot, 4 -pole, dc machine has a simplex lap winding with two conductors per slot. The back pitch and front pitch adopted could be respectively

Last Answer : A 36 slot, 4 -pole, dc machine has a simplex lap winding with two conductors per slot. The back pitch and front pitch adopted could be respectively 19,17

Aluminium is not used as winding wire for the armature of a dc machine because

Description : Aluminium is not used as winding wire for the armature of a dc machine because  (1) aluminium has low resistivity (2) a large winding space is taken by aluminium conductors and creates ... ) the thermal conductivity of aluminium is low (4) aluminium has low conductivity as compared to copper

Last Answer : Aluminium is not used as winding wire for the armature of a dc machine because  (2) a large winding space is taken by aluminium conductors and creates jointing problems (3) the thermal conductivity of aluminium is low (4) aluminium has low conductivity as compared to copper

Wave winding is composed of?

Last Answer : Wave winding is composed of that even number which is exact multiple of poles + 2.

Lap winding is composed of?

Last Answer : Lap winding is composed of any even number of conductors.

In D.C. generators, lap winding is used for?

Last Answer : In D.C. generators, lap winding is used for low voltage, high current.

In the case of lap winding resultant pitch is?

Last Answer : In the case of lap winding resultant pitch is difference of front and back pitches.

In case of D.C. machine winding, number of commutator segments is equal to?

Last Answer : In case of D.C. machine winding, number of commutator segments is equal to number of armature coils.

In lap winding, the number of brushes is always?

Last Answer : In lap winding, the number of brushes is always same as the number of poles.

The resistance of armature winding depends on?

Last Answer : The resistance of armature winding depends on length of conductor, cross-sectional area of the conductor, number of conductors.