The main function of a fuse is to?

by

1 Answer

Answer :

The main function of a fuse is to prevent excessive currents.

by

Related questions

Give the function of fuse and switch.

Description : Give the function of fuse and switch.

Last Answer : Functions of fuse:  * To break the circuit under fault condition.  * To provide overcurrent protection to the circuit.  * To provide short circuit protection to the circuit.  * To provide ...  * To make the electric circuit manually.  * To break the electric circuit manually.

A fuse wire should have :

Description : A fuse wire should have :  (A) Low specific resistance and high melting point (B) Low specific resistance and low melting point (C) High specific resistance and high melting point (D) High specific resistance and low melting point

Last Answer : A fuse wire should have : High specific resistance and low melting point

ln HRC fuse the time between cut-off and final current zero is called

Description : ln HRC fuse the time between cut-off and final current zero is called

Last Answer : ln HRC fuse the time between cut-off and final current zero is called the arcing time

A fuse in a motor circuit provides protection against?

Last Answer : A fuse in a motor circuit provides protection against short-circuit and overload.

The fuse blows off by?

Last Answer : The fuse blows off by melting.

The fuse rating is expressed in terms of?

Last Answer : The fuse rating is expressed in terms of current.

H.R.C. fuse, as compared to a rewirable fuse, has?

Last Answer : H.R.C. fuse, as compared to a rewirable fuse, has no ageing effect, high speed of operation, high rupturing capacity.

A fuse is connected?

Last Answer : A fuse is connected in series with circuit.

The material used for fuse must have?

Last Answer : The material used for fuse must have low melting point and high specific resistance.

Discrimination between main and backup protection is provided by the use of relays which are?

Last Answer : Discrimination between main and back up protection is provided by the use of relays which are slow.

What is fuse?

Description : What is fuse?

Last Answer : Ans. Fuse is used to protect an electric circuit when the rated current exceeds in the circuit the fuse wire melts and opens the circuit.

State any two advantages of MCB over Fuse. State the standard specifications of MCB available in the market.

Description : State any two advantages of MCB over Fuse. State the standard specifications of MCB available in the market.  

Last Answer : Following advantages of MCB over Fuse: 1. No need of replacement of fuse wire. 2. Manually restore of supply is simple. 3. Fault understanding by visual inspection 4. More safe than fuse The standard specifications of ... 6A, 10A,16A,20A, 25A, 30A, 32A, 40A, 50A, 60A and 63A 6. 250V and 450 v

State the material used for making (1) Magnetic Core (2) Fuse element

Description : State the material used for making (1) Magnetic Core (2) Fuse element  

Last Answer : The material used for making of:  (1) Magnetic Core : Iron, cobalt, Nickel, CRGO, HRGO , silicon steel  (2) Fuse Element: Tin- lead wire, Tinned copper wire 

Write applications of each of the following:(i) Fuse (ii) MCB (iii) MCCB.

Description : Write applications of each of the following:(i) Fuse (ii) MCB (iii) MCCB.

Last Answer : i) Applications of fuse:  * Used in domestic installations to provide short circuit protection.  * Used in commercial / Industrial installations to provide overload and short circuit protection.  * Used in ...  * Rectifiers panels,  * U.P.S, Electronic equipment,  * Motors,  * Furnaces

What is a fuse ?

Description : What is a fuse ?

Last Answer :  A Fuse is a protective device which prevent overloading of current in a circuit.

what is HRC fuse?

Description : what is HRC fuse?

Last Answer : HRC (High Rupturing Capacity) fuse HRC fuse is High Rupturing Capacity fuse. At the time of fault it disconnect the circuit very fast. Filling powder is silica sand. No flashover ... speed response Reliable No maintenance CheaperDisadvantages:- We have to replace it manually after each operation.

What are the main electrical equipment used in HPS ? State the function of each parts of it in brief.

Description : What are the main electrical equipment used in HPS ? State the function of each parts of it in brief. 

Last Answer : Following Main Electrical Equipment used in HPS & their function: 1. Alternator 2. Exciter 3. Transformer 4. Switchgear   Function :  1) Alternator:- Alternator is coupled to ... part from the healthy section. It contains circuit breaker, relays, switches and other control devices.  

List the main parts of D.C. motor

Description : List the main parts of D.C. motor

Last Answer : Main parts of D.C. motor and their functions:  Part Functions Yoke i) Provides mechanical support for poles. ii) Acts as protecting cover for machine. iii) Carries magnetic flux. ... a fixed physical position relative to the stator.  Shaft Used to transfer mechanical power 

List out main components of Diesel power station.

Description : List out main components of Diesel power station. 

Last Answer : Main components of Diesel power station: 1) Diesel Engine 2) Engine Air intake system 3) Engine Fuel System 4) Engine Exhaust system 5) Engine cooling system 6) Engine Lubricating system 7) Engine Starting system 8) Diesel Engine Generator (Alternator) 

List out main components of Reactors.

Description : List out main components of Reactors. 

Last Answer : List the main components of Reactors:  1. Core 2. Nuclear fuel (U235) 3. Moderator 4. Control Rod 5. Reflector 6. Reactor vessel 7. Shielding  

How rating of main switch and cable is selected for Industrial Installation.

Description : How rating of main switch and cable is selected for Industrial Installation.

Last Answer : 1. Rating of Main Switch or Fuse Rating is decided in industrial installation: Rating of main switch or fuse is based up the starting current of motor. For calculating starting current is considered 2 ... take 1.5 times the rated current or full load current. & thus cable rating is decided.

The main advantage of AC over DC is:

Description : The main advantage of AC over DC is:  (A) Conversion flexibility from one voltage level to other (B) AC can be easily converted into DC by using a rectifier (C) AC is easy to maintain & can be easily distributed at long distances (D) All of the above

Last Answer : Ac is easy to maintain and ac can be easily converted to dc by rectifier .There is no commutator for conversion in ac that's why ac machines are weight less and more efficiency.ac machines occupy less space than dc .

The main objectives in framing tariff are:

Description : The main objectives in framing tariff are:  (A) The consumers must readily understand the tariffs (B) The tariff must be equitable amongst different consumers (C) Tariffs can be modified from time to time (D) All of the above

Last Answer : The main objectives in framing tariff are:  (A) The consumers must readily understand the tariffs (B) The tariff must be equitable amongst different consumers (C) Tariffs can be modified from time to time (D) All of the above

In main line service as compared to urban and suburban service?

Last Answer : In main line service as compared to urban and suburban service distance between the stops is more, maximum speed reached is high, acceleration and retardation rates are low.

In split phase motor main winding is of?

Last Answer : In split phase motor main winding is of thick wire placed at the bottom of the slots.

What is the main disadvantage of phase advancers?

Description : What is the main disadvantage of phase advancers?

Last Answer : It cannot be used for motors below 20 H.P.

What is the main purpose of electroplating?

Description : What is the main purpose of electroplating?

Last Answer : Protecting  reactive  metals  from  corrosion.

What is the main use of a transistor?

Description : What is the main use of a transistor?

Last Answer : Main use of a transistor as amplifier and as switch.

What are the main causes of harmonics?

Description : What are the main causes of harmonics?

Last Answer : Harmonic is a non linear load because linear load voltage deviated due to connection of some electrinie device such as converter,inverter

What are the main parts of a generator?

Description : What are the main parts of a generator?

Last Answer : the main parts of the generator are as follows yoke Armature Poles field winding Prime mover  Commutator Shaft Bearings Brushes

Is the search function not working?

Description : Is the search function not working?

Last Answer : Search hasn’t been working for a while. I know that the tech mods are looking at it, but my impression is that it’s more complicated than any of the other fixes they’ve done.

State at least one function and the material used for the following parts of DC Motor.

Description : State at least one function and the material used for the following parts of DC Motor.

Last Answer : Part Function Material Yoke -Provides mechanical support for poles -Acts as protecting cover for machine -Provides path for magnetic flux Cast Iron OR Cast Steel Field Winding - ... Pole core  Provides mechanical support to field winding. Cast Iron OR Cast Steel

Draw the block diagram of regulated power supply, explain function of each block and draw waveforms of each stage.

Description : Draw the block diagram of regulated power supply, explain function of each block and draw waveforms of each stage.

Last Answer : 1. A step down transformer 2. A rectifier 3. A filter 4. A regulator Operation of Regulated Power Supply:- Step Down Transformer:- A step down transformer will ... regulator. A regulator will maintain the output constant even when changes at the input or any other changes occur.

Draw block diagram of PLL as a FM demodulator. Explain function of each block.

Description : Draw block diagram of PLL as a FM demodulator. Explain function of each block.

Last Answer : Operation:  The FM signal which is to be demodulated is applied at the input of the PLL.  the PLL is locked to the FM  The error voltage produced at ... using PLL ensures a high Linearity, between the instantaneous input frequency and VCO control voltage (error amplifier output)

State function of ELCB.

Description : State function of ELCB.

Last Answer : Functions of ELCB: 1. Provides protection to apparatus by detecting the unsafe magnitudes of leakage currents diverting to earth. 2. Disconnect the supply to the circuit if line to ground ... 3. Provides protection to users by detecting the unsafe magnitudes of leakage currents diverting to earth.

Write the function of freewheeling diode.

Description : Write the function of freewheeling diode.

Last Answer : Function of Freewheeling Diode (FWD): a) Freewheeling diode is used across inductive loads such as coils, dc motor armature etc. to prevent voltage spikes across these loads when the switching ... current is shifted from switching device, it is turned off easily and regain its blocking ability.

Describe the function of MUSE system for HDTV.

Description : Describe the function of MUSE system for HDTV.

Last Answer : Bandwidth can be reduced by MUSE (Multiple Sub -Nyquist Sampling Encoding) system MUSE stands for Multiple Sub-Nyquist sampling encoding and is an HDTV bandwidth compression schemedeveloped by ... digital Audio system is called DANCE (Digital Audio Near-Instantaneous Compression and expansion). 

applications of : (1) Function generator (2) Video pattern generator (3) AF signal generator and (4) Pulse generator.

Description : applications of : (1) Function generator   (2) Video pattern generator (3) AF signal generator and (4) Pulse generator. 

Last Answer : 1) Function generator: i) As trouble shooting tool to different analog and digital circuits. ii) As a source of alignment of different receiver. iii) If rise time of square wave is ... trigger output, pulses are available. iii) The generator can be operated as free running generator.

Draw neat block diagram of FM receiver and explain function of each block

Description : Draw neat block diagram of FM receiver and explain function of each block

Last Answer : Explanation:-  RF amplifier: There are two important functions of RF amplifier: 1) To increase the strength of weak RF signal. 2) To reject image frequency signal. In FM ... FM broadcast, the maximum modulating frequency is 15 kHz. Hence the audio amplifier must have large bandwidth.

Draw and explain the function of cooling tower in TPS.

Description : Draw and explain the function of cooling tower in TPS.

Last Answer : Cooling tower in TPS: The function of cooling tower is to reduce the temperature of water coming from condenser. Water is circulated from the basin of the cooling ... cooling Tower temperature of water is reduced either by natural or forced or induced draught method or combine

State the function of super heater of a thermal power plant.

Description : State the function of super heater of a thermal power plant. 

Last Answer : Function of Super heater: -  Its function is to increase the temperature of steam by absorbing heat from exhausted hot flue gases.

What is the function of an electrical filter ?

Description : What is the function of an electrical filter ?

Last Answer : Filter separates different components that are mixed together. Electrical filter can separate different frequency components. Electrical filters are the electrical circuits which are use to remove unwanted frequency components from the signal.

List any four wiring accessories and its function.

Description : List any four wiring accessories and its function. 

Last Answer : Following wiring accessories: 1) Lamp holder: It is the holding accessory. The different types of holders used such as angle holder, batten holder, pendent holder 2) Ceiling Rose: Ceiling rose are of two types: ... etc 9) Switch board, ICDP Main Switch 10) All types of size of VIR & PVC wire

State function of starter and ELCB. (Earth Leakage Circuit Breaker)

Description : State function of starter and ELCB. (Earth Leakage Circuit Breaker)

Last Answer : i) Function of Starter:- 1. To prevent the high starting current OR to minimize the starting current. 2. To give supply failure protection 3. To give over load and short circuit protection ... an installation and cut off the circuit from power supply and avoid electrical shock to the person.

State function of Busbar and which material is used for busbar?

Description : State function of Busbar and which material is used for busbar?

Last Answer : Function of Busbar Bus-bar: - Distribute the load on 3-phase four wire systems. To provide number of connection of incoming line and to provide easy way to connect number of sub circuit. ... to the element. This element means busbar Material is used for busbar: 1. Copper 2. Alluminium

State function of i) Ceiling rose ii) Conduit

Description : State function of i) Ceiling rose ii) Conduit 

Last Answer : Function of Ceiling rose: Output connection for ceiling fan or tube.  Function of Conduit – To run the wires from switch board to appliances. 

State the function of cooling tower and condenser in thermal power station.

Description : State the function of cooling tower and condenser in thermal power station.

Last Answer : 1. Condenser:   Function of condenser is to convert exhaust steam again into water by reducing its temperature with the help of cold water. Also it reduces back pressure of steam turbine 2 ... tower : The function of cooling tower is to reduce the temperature of water coming from condenser.

State the function of superheater and economizer.

Description : State the function of superheater and economizer.

Last Answer : Function of Superheater : The steam produced in the boiler is not dry but contains some moisture. Such wet steam can damage/corrode and reduce the efficiency of the plant. Hence before supplying ... the temperature of feed water to the boiler, so that efficiency of overall system is increased.

State the location and function of i) Economizer ii) Feed water heater.

Description : State the location and function of i) Economizer ii) Feed water heater.

Last Answer : (i) Economizer:-  Location: - It is placed in the path of flue gases in between the exit from the furnace and the chimney. OR In The way of feed water before boiler. Function: - ... economizer. Function: - Its function is to increase the temperature of feed water by using blade steam.

Write function of control rods in nuclear power plant.

Description : Write function of control rods in nuclear power plant.

Last Answer : Function of control rods in nuclear power plant: The function of control rod is to control the chain reaction in reactor core by adjusting its height.