Large internal faults are protected by?

by

1 Answer

Answer :

Large internal faults are protected by merz price percentage differential protection.

by

Related questions

Which relays are used for phase faults on long line?

Last Answer : Impedance relays are used for phase faults on long line.

A transmission line is protected by?

Last Answer : A transmission line is protected by distance protection, time graded and current graded overcurrent protection.

Thyristor can be protected from over voltages by using

Description : Thyristor can be protected from over voltages by using

Last Answer : Thyristor can be protected from over voltages by using Voltage clamping device

Write down the steps involved for internal thread cutting on lathe machine.

Description : Write down the steps involved for internal thread cutting on lathe machine.

Last Answer : Steps involved for internal thread cutting on lathe machine  1) Hole is first bored to the root diameter of the thread. 2) Tool is fixed on the tool post or on the boring bar adjusted the angle of ... the start. 10) Keep going until the calculated depth of cut has been reached on the top slide.

List the types of Internal wiring in residential installations –

Description : List the types of Internal wiring in residential installations –

Last Answer : 1) Cleat wiring 2) Batten wiring 3) Wooden casing capping wiring 4) PVC conduit wiring 5) PVC casing capping wiring 6) Concealed wiring

State the concept of internal voltage drop.

Description : State the concept of internal voltage drop.

Last Answer : Concept of internal voltage drop: Every practical source offers some opposition to the current due to its internal parts or components. e.g. a 12V battery has electrodes made up of conducting ... internal voltage drop, the terminal voltage of practical voltage source is always less than its emf. 

Define the following terms as referred to battery. a) E.M.F b) Internal resistance c) Ah efficiency d) WAh efficiency

Description : Define the following terms as referred to battery. a) E.M.F b) Internal resistance c) Ah efficiency d) WAh efficiency

Last Answer : a) E.M.F : The electromotive force of a battery is defined as the energy spent or the work done in taking a unit positive charge around the complete circuit of the battery i.e., in ... input required to restore the initial state of charge, under specified conditions, is called Watt-hr efficiency.

What is internal voltage drop and terminal voltage?

Description : What is internal voltage drop and terminal voltage?

Last Answer : It is not permissible to just connect the positive terminal to the negative terminal of a cell with a copper wire. It will overheat and get damaged. This happens because the electromotive force (emf) ... than the nominal voltage (emf) of the cell and this lower voltage is called terminal voltage.

The internal resistances of an ideal current source, and an ideal voltage source are, respectively,

Description : The internal resistances of an ideal current source, and an ideal voltage source are, respectively, (A) 0, ∞ (B) ∞, ∞ (C) ∞, 0 (D) 0,0

Last Answer : The internal resistances of an ideal current source, and an ideal voltage source are, respectively, ∞, 0

Sketch internal design of 4x3 ROM.

Description : Sketch internal design of 4x3 ROM.

Last Answer : The internal design of 4x3 ROM

For maximum transfer of power, internal resistance of the source should be?

Description : For maximum transfer of power, internal resistance of the source should be?

Last Answer : For maximum transfer of power, internal resistance of the source should be equal to load resistance.

does the BJT have internal capacitance?

Last Answer : Yes BJT have internal capacitances.

EPROM internal structure

Description : EPROM internal structure

Last Answer : EPROM (Erasable Programmable ROM): EPROM stands for Erasable Programmable ROM.Data is stored in EPROM memory cell as an electrostatic charge on highly insulated conductor. The charge can remain for ... figure shows EPROM memory cell consisting of a single NMOS filed effect transistor. 

Large internal faults are protected by (a) merz price percentage differential protection (b) mho and ohm relays (c) horn gaps and temperature relays (d) earth fault and positive sequence relays

Description : Large internal faults are protected by (a) merz price percentage differential protection (b) mho and ohm relays (c) horn gaps and temperature relays (d) earth fault and positive sequence relays

Last Answer : (a) merz price percentage differential protection

Ungrounded neutral transmission system is not recommended because of system (a) insulation being overstressed due to over voltages (b) insulation overstress may lead to failure and subsequent phase to phase faults (c) being inadequately protected against ground fault (d) all of the above

Description : Ungrounded neutral transmission system is not recommended because of system (a) insulation being overstressed due to over voltages (b) insulation overstress may lead to failure and subsequent phase to phase faults (c) being inadequately protected against ground fault (d) all of the above

Last Answer : (d) all of the above

State and explain the faults occur in the transformers.

Description : State and explain the faults occur in the transformers.

Last Answer : Sr. No. Type of fault Explanation 1 Earth fault Due to breakdown of insulation between live conducting parts such as winding, terminals etc. and earthed metallic parts such as ... place and few turns of the same winding are shortcircuited, the inter-turn fault takes place.

What are causes of faults in power system? State any four harmful effects of faults.

Description : What are causes of faults in power system? State any four harmful effects of faults.

Last Answer : Causes of Faults in the Power System:  1) Breaking of Conductors: It is one of major causes of faults. Breaking of conductors is due to excessive heat or because of mechanical stresses ... maintenance of machines / equipment / lines / protective system leads to faults in the power system.

Reactance relays are employed for Phase faults in :

Description : Reactance relays are employed for Phase faults in : (A) Short lines (B) Medium lines (C) Long lines (D) Any line

Last Answer : Reactance relays are employed for Phase faults in : Short lines

How the alternator can be protected from inter-turn fault?

Description : How the alternator can be protected from inter-turn fault?

Last Answer : Inter-turn fault Protection: Figure shows scheme for one phase only. It is identical for other phases. Under normal working condition, the two currents in the stator winding sections (S1 and S2) are ... relay coil to operate it, leading to isolation of the alternator from the power system.

How Transformer Protection provided for internal faults?

Description : How Transformer Protection provided for internal faults?

Last Answer : 1.Bucholz Relay (1st Stage Alarm and 2nd Stage Trip) 2.Sudden Pressure Relay (1st Stage Alarm and 2nd Stage Trip) 3.Pressure Relief Valve (1st Stage Alarm and 2nd Stage Trip) 4.Pressure Switch ... 8.Gas Temperature Indicator (Alarm) 9.Silicon Breather (Passive - no alarm) 10.Smoke Detector (Alarm)

What are the tests done to minimize internal faults?

Description : What are the tests done to minimize internal faults?

Last Answer : 1.Dissolved Gas Analysis (DGA): Faults due to arcing, high current breakdown of oil, localized sparking, partial discharge of oil, localized overheating or hot spots, etc. causes ... Over current relays with under voltage blocking 6.Zero sequence protection. 7.Negative phase sequence protection

Python Scipy : Segmentation Faults when slicing (splitting into train and test sets) large csr_matrix -Web-Development

Description : Python Scipy : Segmentation Faults when slicing (splitting into train and test sets) large csr_matrix -Web-Development

Last Answer : answer:

What type of mountains form at large-scale normal faults where the footwall and hanging wall spread apart from each other?

Description : What type of mountains form at large-scale normal faults where the footwall and hanging wall spread apart from each other?

Last Answer : What is the answer ?

Describe the accessibility modifier “protected internal”.

Description : Describe the accessibility modifier “protected internal”. 

Last Answer : It is available to classes that are within the same assembly and derived from the specified base class.

What is protected internal accessibility?

Description : What is protected internal accessibility?

Last Answer : Access is restricted to types derived from the containing class or from files within the same assembly.

Describe the accessibility modifier “protected internal”.

Description : Describe the accessibility modifier “protected internal”. 

Last Answer : It is available to classes that are within the same assembly and derived from the specified base class.

Describe the accessibility modifier protected internal.

Description : Describe the accessibility modifier protected internal. 

Last Answer : It’s available to derived classes and classes within the same Assembly (and naturally from the base class it’s declared in). 

8096 write-protected mode, no code can write to memory address between __. a) 2020 to 3FFFH b) 8000 to FFFFH c) 2000 to 3FFFH d) 2020 to 202FH 17. If the __ pin is ___ , then we have the option of using the ____ ROM or EPROM together with _____ memory and devices. a) EA, high, internal, external b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Description : 8096 write-protected mode, no code can write to memory address between __. a) 2020 to 3FFFH b) 8000 to FFFFH c) 2000 to 3FFFH d) 2020 to 202FH 17. If the __ pin is ___ , then we have the option ... b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Last Answer : c) EA, high, external, internal

A loss of excitation protection scheme for large generating unit employs

Description : A loss of excitation protection scheme for large generating unit employs A) under frequency relays B) offset Mho relay C) reactance relay D) percentage differential relay

Last Answer : A loss of excitation protection scheme for large generating unit employs offset Mho relay

Interruption of large currents by relay requires?

Last Answer : Interruption of large currents by relay requires arc suppressing blow out coils, wide separation of the opened contacts, high speed opening of contacts.

Is it true that it's hard for people to realize their own faults?

Description : Is it true that it's hard for people to realize their own faults?

Last Answer : I still think you should have just taken it back to the school that you took it from. I wouldn't have taken someone else's bag home to begin with. Maybe she isn't the only one not seeing ... or face them. Sometimes they realize their faults some time after the event. Hindsight is 20/20, you know.

Are you willing to admit your driving faults?

Description : Are you willing to admit your driving faults?

Last Answer : answer:I have poor peripheral vision, as well as dyscalculia - which affects my ability to distinguish left from right, as well as accurately judge distance. As a result, I am an exceptionally cautious ... a garage spot and walk an extra block than park on the street in front of my destination.

How much does it bother you when other people project their faults onto you?

Description : How much does it bother you when other people project their faults onto you?

Last Answer : I usually pick it up for what it is early, and don’t let them get to me. Always remember you control your emotions and feelings. Don’t let others make you feel their problems.

What are your qualities...what are your faults?

Description : What are your qualities...what are your faults?

Last Answer : I am an excellent leader. I am great at big ideas. I am loyal and passionate. I do not have patience, I can be unforgiving, I have a love/hate relationship with humanity.

Why is it so easy to dog humanity, and condemn the species for all of its faults, including it's technology, and ignore the spectacular, technical phenomenon of the rescue of the Chilean miners?

Description : Why is it so easy to dog humanity, and condemn the species for all of its faults, including it's technology, and ignore the spectacular, technical phenomenon of the rescue of the Chilean miners?

Last Answer : I am sure there are some that will say this is the exception that proves the rule.

27" i7 iMac's, do they have noisy harddrives? do they have any other recent faults?

Description : 27" i7 iMac's, do they have noisy harddrives? do they have any other recent faults?

Last Answer : No, they do not. they run pretty much silent. i’ve never heard this claim regarding the HDD on the iMac.

What are symmetrical and asymmetrical faults ?

Description : What are symmetrical and asymmetrical faults ?

Last Answer : Symmetrical Fault: The same amount in each phase due to the float in the electrical system. The fault that causes hot current to flow is called semantic fault. Circuit breaker ratings are determined by ... through each fan is called an asymmetrical fault. The relay is set via asymmetrical font.

What is one of the faults of imperialism that becomes clear in Heart of Darkness?

Description : What is one of the faults of imperialism that becomes clear in Heart of Darkness?

Last Answer : the colonists activities are largely ineffective -apex

In a particular volcanic region many small faults fracture the rocks of the crust. What features are likely to form beneath?

Description : In a particular volcanic region many small faults fracture the rocks of the crust. What features are likely to form beneath?

Last Answer : What is the answer ?

Where are most faults found?

Description : Where are most faults found?

Last Answer : joining two segments of a mid-ocean ridge

What do you call the programs that are used to find out possible faults and their causes? A) Operating system extensions B) Cookies C) Diagnostic software D) Boot diskettes

Description : What do you call the programs that are used to find out possible faults and their causes? A) Operating system extensions B) Cookies C) Diagnostic software D) Boot diskettes

Last Answer : Answer : C

Rift Valley is formed – (1) between two anticlines (2) between two faults (3) erosion of synclinal basin (4) due to volcanic eruption

Description : Rift Valley is formed – (1) between two anticlines (2) between two faults (3) erosion of synclinal basin (4) due to volcanic eruption

Last Answer : (2) between two faults Explanation: A rift valley is a linear-shaped lowland between several highlands or mountain ranges created by the action of a geologic rift or fault. It is formed by the subsidence of a segment of the Earth's crust between dip-slip, or normal, faults.

Earthquakes are generally associated with : (1) Joints (2) Faults (3) Folds (4) Schistosity

Description : Earthquakes are generally associated with : (1) Joints (2) Faults (3) Folds (4) Schistosity

Last Answer : (2) Faults Explanation: Earthquake is a sudden and violent movement, or fracture, within the earth followed by the series of shocks resulting from this fracture. Earthquake is more likely to be of Tectonic origin and probably because of existence of a Fault.

The winch shown in the illustration operates in any of the positions with the master switch in the 'lower' direction, but will not 'hoist' in any of the master switch hoist positions. Which of the listed faults could be the cause? EL-0102 A. Master switch contact 'MS3' may have defective springs. B. Contactor '3M' coil could have an open winding. C. Contact '2M' in the power circuit may be badly corroded. D. Series relay 'FR' may be open.

Description : The winch shown in the illustration operates in any of the positions with the master switch in the 'lower' direction, but will not 'hoist' in any of the master switch hoist positions. Which of the listed faults ... '2M' in the power circuit may be badly corroded. D. Series relay 'FR' may be open.

Last Answer : Answer: A

Which of the listed faults cannot be eliminated, EXCEPT by turning or grinding a commutator with a rigidly supported tool? A. Sparking brushes B. Eccentricity C. High mica D. Blackened commutator

Description : Which of the listed faults cannot be eliminated, EXCEPT by turning or grinding a commutator with a rigidly supported tool? A. Sparking brushes B. Eccentricity C. High mica D. Blackened commutator

Last Answer : Answer: B

Sparking of D.C. motor brushes can be caused by __________. A. an open commutating winding B. many mechanical, electrical or operating faults C. an open interpole D. all of the above

Description : Sparking of D.C. motor brushes can be caused by __________. A. an open commutating winding B. many mechanical, electrical or operating faults C. an open interpole D. all of the above

Last Answer : Answer: B

Which of the following represents a characteristic of an ungrounded electrical distribution system? A. Accidental contact between one line and ground does not cause an outage. B. Double ground faults on different phases will not cause an outage. C. Ground detection systems are unnecessary. D. Accidental contact between one line and ground will always cause an outage.

Description : Which of the following represents a characteristic of an ungrounded electrical distribution system? A. Accidental contact between one line and ground does not cause an outage. B. Double ground faults on ... unnecessary. D. Accidental contact between one line and ground will always cause an outage.

Last Answer : Answer: A

What are the different types of faults in a transformer?

Description : What are the different types of faults in a transformer?

Last Answer : The internal faults include phase faults, ground faults, inter-turn faults, tap-changer failure, and leakage oil from tank. The external faults include system phase faults, system ground faults, over loads and over fluxing.

State the various types of unsymmetrical faults.

Description : State the various types of unsymmetrical faults.

Last Answer : Line to ground ,line to line and double line to ground faults

State the different types of faults.

Description : State the different types of faults.

Last Answer : Symmetrical faults and unsymmetrical faults and open conductor faults.