Please Log in or Register for more.


103 views

1 Answer

Answer :

For cost and safety, the outdoor substations are installed for voltages above 33 kV.

Like 0 like

Please log in or register to answer this question.

Related Questions


78 views 0 answers







For cost and safety, the outdoor substations are installed for voltages above (a) 11 kV (b) 33 kV (c) 60kV (d) 110kV
Last Answer : (b) 33 kV

Show More

14 views 1 answer








Last Answer : An isolator is installed generally on both sides of a circuit breaker.

Show More

147 views 1 answer







Compare indoor and outdoor sub-station on given points : (i) Capital cost (ii) Time required for completion (iii) Availability of natural light (iv) Space required 
Last Answer : Sr. No.  Points Indoor substation Outdoor substation  1 Capital cost High, as construction work cost is more.  Less, as construction work cost is less 2 Time required for ... time. So it saves electrical energy & its cost 4 Space Require Less More

Show More

142 views 1 answer







How to Protect Outdoor Furniture
Last Answer : How to Protect Outdoor Furniture Outdoor furniture are made sturdy, so they can last under the harsh conditions presented by your home's outdoor environment. However, without additional protection, the ... in fact, they will make your property look tacky. So better do the necessary cleaning.

Show More

8 views 1 answer







How to Build an Outdoor Fireplace
Last Answer : How to Build an Outdoor Fireplace How to Build an Outdoor Fireplace Fireplaces have almost become a requirement for every house in countries with cold weather. During winter, they help us keep ourselves warm ... be made. Instead of wood nowadays, people go in for gas as it causes less pollution.

Show More

5 views 1 answer







State the different types of outdoor flood lighting and where are they used.
Last Answer : There are three types of projectors used for flood lighting :  a) Narrow beam Projector b) Medium angle Projector c) Wide angle Projector a) Narrow beam Projectors: - Light beam with such ... yards, stadiums, car parking area etc. 3) It is used for illuminating advertisements, boarding's etc.

Show More

168 views 1 answer







How is marble floor installed?
Last Answer : After the cladding tiles made from natural marble began to appear on the market, it became possible to arrange real marble floors. Increasingly, marble floors can be found in residential mansions and ... . It is also desirable to treat the surface of the marble with a protective polymerizing film.

Show More

10 views 1 answer







Phase modifier is normally installed
Last Answer : Phase modifier is normally installed in case of long lines

Show More

337 views 1 answer








Last Answer : In a distribution system, in order to improve power factor, the synchronous capacitors are installed at the receiving end.

Show More

185 views 1 answer








Last Answer : For high value of diversity factor, a power station of given installed capacity will be in a position to supply more number of consumers.

Show More

169 views 1 answer













The volt-ampere output of a 2:1 transformer will be: A. the same as the volt amp input B. 1/4 the volt amp input C. 1/2 the volt amp input D. twice the volt amp input

Show More

7 views 0 answers







Instantaneous Voltages
Last Answer : Instantaneous value: The value of an alternating quantity at a particular instant is called the instantaneous value of the quantity at that instant.  Maximum Value: The maximum or peak value ... an alternating quantity during a cycle is called the maximum value or amplitude of the quantity.

Show More

192 views 3 answers







Sinusoidal Steady-State Analysis - Using nodal analysis, find node voltages in the circuit.
Last Answer : Sinusoidal Steady-State Analysis - Using nodal analysis, find node voltages in the circuit.

Show More

172 views 1 answer







Alternating voltages and phasors (Problem 15)
Last Answer : Alternating voltages and phasors (Problem 15)

Show More

48 views 1 answer







Alternating voltages and phasors (Problem 14)
Last Answer : Alternating voltages and phasors (Problem 14)

Show More

47 views 1 answer







Alternating voltages and phasors (Problem 13)
Last Answer : Alternating voltages and phasors (Problem 13)

Show More

49 views 1 answer







Alternating voltages and phasors (Problem 12)
Last Answer : Alternating voltages and phasors (Problem 12)

Show More

43 views 1 answer







Alternating voltages and phasors (Problem 11)
Last Answer : Alternating voltages and phasors (Problem 11)

Show More

54 views 1 answer







Alternating voltages and phasors (Problem 10)
Last Answer : Alternating voltages and phasors (Problem 10)

Show More

52 views 1 answer







Alternating voltages and phasors (Problem 9)
Last Answer : Alternating voltages and phasors (Problem 9)

Show More

46 views 1 answer







Alternating voltages and phasors (Problem 8)
Last Answer : Alternating voltages and phasors (Problem 8)

Show More

51 views 1 answer







Alternating voltages and phasors (Problem 7)
Last Answer : Alternating voltages and phasors (Problem 7)

Show More

44 views 1 answer







Alternating voltages and phasors (Problem 6)
Last Answer : Alternating voltages and phasors (Problem 6)

Show More

46 views 1 answer







Alternating voltages and phasors (Problem 5)
Last Answer : Alternating voltages and phasors (Problem 5)

Show More

42 views 1 answer







Alternating voltages and phasors (Problem 4)
Last Answer : Alternating voltages and phasors (Problem 4)

Show More

50 views 1 answer







Alternating voltages and phasors phasor addition and division (Problem 3)
Last Answer : Alternating voltages and phasors phasor addition and division (Problem 3)

Show More

58 views 1 answer







Alternating voltages and phasors : phasor addition (Problem 2)
Last Answer : Alternating voltages and phasors : phasor addition (Problem 2)

Show More

43 views 1 answer







Alternating voltages and phasors (Problem 1)
Last Answer : Alternating voltages and phasors (Problem 1)

Show More

35 views 1 answer







Thyristor can be protected from over voltages by using
Last Answer : Thyristor can be protected from over voltages by using Voltage clamping device

Show More

108 views 1 answer







A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are :  (A) less than 66 kV (B) lie between 66 kV and 110 kV (C) more than 165 kV (D) lie between 110 kV and 165 kV
Last Answer : A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are : lie between 66 kV and 110 kV

Show More

154 views 1 answer







The voltages across various discs of suspension insulators having identical discs are different due to:  (A) Surface leakage currents  (B) Series capacitance of lines  (C) Shunt capacitance to ground  (D) Series and shunt capacitances
Last Answer : The voltages across various discs of suspension insulators having identical discs are different due to: Shunt capacitance to ground 

Show More

385 views 1 answer







The sending end and receiving end voltages of a three-phase transmission line are 10 kV/ph and 9.5 kV/ph, respectively. If the resistance drop is 150 V/ph and receiving end power factor is 0.8, the sending end power factor is (A) 0.745 lagging (B) 0.775 lagging (C) 0.8 lagging (D) 0.85 lagging
Last Answer : Vscos¢s-Vrcos¢r=IR

Show More

3.0k views 2 answers







Why transmission voltages are high?
Last Answer : If current is high then I2R losses will be more .If I2R losses is more then heat generated is more. By heat or increasing temperature resistance will also be increase which will decrease ... voltage we are decreasing current which is advantageous. That's why transmission voltages is high.

Show More

136 views 2 answers







How much do you think it would cost to build this house if we could do much of the work ourselves?
Last Answer : Given the experience your hubby and son have, added to your (@Dutchess_III) willingness to add your sweat equity , I think you should be able to save a bundle over having the home built to be move-in ready ... will take, but I think you should be able to get an idea of the savings by the salaries.

Show More

0 views 1 answer







Would you rather live in a low cost of living area?
Last Answer : answer:Welcome to Fluther. I generally make my own things to do and I don’t look too hard for ‘culture’. Even so, I like living in Connecticut as long as I can afford it, and I’ve liked low-cost areas, too.

Show More

0 views 1 answer







How much does a Starbucks scone cost (in, say, San Francisco)?
Last Answer : Between 3 and 5 dollars. Why?

Show More

0 views 1 answer







How much does a seat belt ticket cost in Ohio?
Last Answer : Did you get one? You can call the number on the ticket to find the amount due.

Show More

0 views 1 answer







Lewis PLC is breaking down and classifying costs to determine which are associated with specific marketing activities. Lewis is performing a A)marketing cost analysis. B)sales analysis. C)marketing audit. D)cost audit. E)variable cost analysis.
Last Answer : A)marketing cost analysis.

Show More

6 views 1 answer







For optimum generator scheduling for different power plants, the minimum fuel cost is obtained when
Last Answer : For optimum generator scheduling for different power plants, the minimum fuel cost is obtained when The incremental fuel cost of each plant multiplied by the penalty factor is the same

Show More

93 views 1 answer







Power generation cost reduces as (A) Diversity factor increases and load factor decreases. (B) Diversity factor decreases and load factor increases. (C) Both diversity factor and load factor increase. (D) Both diversity factor and load factor decrease
Last Answer : Power generation cost reduces as Both diversity factor and load factor increase.

Show More

88 views 1 answer







The capital cost of a power plant depends on  (1) Total installed capacity only. (2) Total number of units only. (3) Total installed capacity and number of units as well. (4) Neither the installed capacity nor number of units
Last Answer : The capital cost of a power plant depends on Total installed capacity and number of units as well.

Show More

677 views 1 answer







In order to have a lower cost of electrical energy generation the load factor  (1) and the diversity factor should be low (2) should be low but the diversity factor should be high (3) should be high but the diversity factor should be low (4) and the diversity factor both should be high
Last Answer : In order to have a lower cost of electrical energy generation the load factor and the diversity factor both should be high

Show More

136 views 1 answer








Last Answer : In fossil fuel transportation cost is least.

Show More

185 views 2 answers







How much would a laboratory have to pay you to draw 6 tubes of blood from your arm?
Last Answer : $50 per draw, for time and expenses, not for the blood draw itself.

Show More

0 views 1 answer







What do you think this ring is worth?
Last Answer : 10 US$. Maybe less.

Show More

0 views 1 answer







Is a fair exchange always not a robbery?
Last Answer : The common answer is the seller should have done the research before selling ( or the buyer, since it is a two way street). I personally would tell the other party, if I knew about the difference.

Show More

1 view 1 answer







How to find cheap flights from Portland, OR to L.A., Cali?
Last Answer : answer:I know the dates have passed but this is a helpful guide on finding cheap flights: http://lifehacker.com/5509357/the-frequent-fliers-guide-to-finding-cheap-airfare

Show More

0 views 1 answer







What extreme you would go to, in order to catch your partner/spouse cheating?
Last Answer : I would ask him and see what happens. He knows better than to ever fuck with me or the family we built together. Same here. What we have together is worth more than what each of us can have in ... open marriage. Betraying me when you don't have to is worse than if you were in a monogamous marriage.

Show More

0 views 1 answer






Show More⇦ PreviousNext ⇨