1 Answer

Answer :

The fuse blows off by melting.

Related questions

Description : ln HRC fuse the time between cut-off and final current zero is called

Last Answer : ln HRC fuse the time between cut-off and final current zero is called the arcing time

Description : A fuse wire should have :  (A) Low specific resistance and high melting point (B) Low specific resistance and low melting point (C) High specific resistance and high melting point (D) High specific resistance and low melting point

Last Answer : A fuse wire should have : High specific resistance and low melting point

Last Answer : A fuse in a motor circuit provides protection against short-circuit and overload.

Last Answer : The fuse rating is expressed in terms of current.

Last Answer : H.R.C. fuse, as compared to a rewirable fuse, has no ageing effect, high speed of operation, high rupturing capacity.

Last Answer : A fuse is connected in series with circuit.

Last Answer : The material used for fuse must have low melting point and high specific resistance.

Last Answer : The main function of a fuse is to prevent excessive currents.

Description : What is fuse?

Last Answer : Ans. Fuse is used to protect an electric circuit when the rated current exceeds in the circuit the fuse wire melts and opens the circuit.

Description : State any two advantages of MCB over Fuse. State the standard specifications of MCB available in the market.  

Last Answer : Following advantages of MCB over Fuse: 1. No need of replacement of fuse wire. 2. Manually restore of supply is simple. 3. Fault understanding by visual inspection 4. More safe than fuse The standard specifications of ... 6A, 10A,16A,20A, 25A, 30A, 32A, 40A, 50A, 60A and 63A 6. 250V and 450 v

Description : State the material used for making (1) Magnetic Core (2) Fuse element  

Last Answer : The material used for making of:  (1) Magnetic Core : Iron, cobalt, Nickel, CRGO, HRGO , silicon steel  (2) Fuse Element: Tin- lead wire, Tinned copper wire 

Description : Write applications of each of the following:(i) Fuse (ii) MCB (iii) MCCB.

Last Answer : i) Applications of fuse:  * Used in domestic installations to provide short circuit protection.  * Used in commercial / Industrial installations to provide overload and short circuit protection.  * Used in ...  * Rectifiers panels,  * U.P.S, Electronic equipment,  * Motors,  * Furnaces

Description : Give the function of fuse and switch.

Last Answer : Functions of fuse:  * To break the circuit under fault condition.  * To provide overcurrent protection to the circuit.  * To provide short circuit protection to the circuit.  * To provide ...  * To make the electric circuit manually.  * To break the electric circuit manually.

Description : What is a fuse ?

Last Answer :  A Fuse is a protective device which prevent overloading of current in a circuit.

Description : what is HRC fuse?

Last Answer : HRC (High Rupturing Capacity) fuse HRC fuse is High Rupturing Capacity fuse. At the time of fault it disconnect the circuit very fast. Filling powder is silica sand. No flashover ... speed response Reliable No maintenance CheaperDisadvantages:- We have to replace it manually after each operation.

Description : Define pinch off voltage and drain resistance of FET.

Last Answer : 1 . Pinch-off Voltage: It is the value of the drain to source voltage VDS at which the drain current ID reaches its constant saturation value. Any further increase in VDS does not have any ... drain to source voltage to the change in drain current. It is also called AC/dynamic drain resistance.

Description : The SCR would be turned OFF by voltage reversal of applied anode-cathode ac supply frequency of A) 10 kHz B) 10 Hz C) 5 kHz D) 5 Hz 

Description : How is the GTO turned off? A) By using a commutation circuit B) By applying reverse gate pulse C) By using a latch-up circuit D) By reverse anode current pulse 

Last Answer : How is the GTO turned off? A) By using a commutation circuit B) By applying reverse gate pulse C) By using a latch-up circuit D) By reverse anode current pulse 

Description : What is meant by pinch off voltage in MOSFET?

Last Answer : SCR turned off when the anode current falls below holding current.

Description : Explain the principle of ON-OFF control and phase control of AC voltage controller with suitable circuit and waveforms.

Last Answer : The integral cycle control (on-off control) and phase angle control are the two types of AC voltage controller. The principle of ON-OFF control: The on-off control is also called an integral cycle ... control. In phase control, the switch is on for some period of each cycle.  

Last Answer : GTO can be turned on by providing positive pulse to the gate terminal and it can be turn off by providing negative pulse to gate terminal.

Last Answer : No we cannot turn off normal thyristor using Gate.

Description : thyristor can be turned off by?

Last Answer : Thyristor can be turned off by making anode potential equal to cathode potential or by making anode potential less than cathode potential.

Description : Draw the structural diagram of GTO. Explain briefly the switching behavior of GTO with the help of appropriate voltage and current waveform.

Last Answer : Gate Turn Off Thyristor (GTO) Conventional Thyristor can be turned on with gate terminal but can not turn off from gate terminal. But in case of Gate Turn Off Thyristor (GTO), we can turn it on and off ... subdivided as storage period (Ts), fall period (Tp) and tail period (Tt).

Description : drive the expression for the  (1)current that commutates the scr, (2)the peak current, (3) conduction time?  in class B,C,D and E.

Description : A fuse, with a radius of 0.1 mm blows at 10A. What should be the radius of fuse wire made of the same material which melts at 20A? (1) 0.5 mm (2) 0.05 mm (3) 0.159 mm (4) 0.318 mm

Description : When fuse blows?

Last Answer : When a fuse blows, you should replace the fuse and check to seewhat might have caused it to blow. It's a sign that there might besomething causing too much current to flow in the circuit.

Description : Why is My Kenwood double din DVD player blows the fuse when hooked to power please help?

Last Answer : Need answer

Description : If a fuse blows frequently, one should (a) replace it with a thin wire (b) replace it with a thick copper wire (c) replace it with a paper clip (d) call an electrician

Last Answer : Ans:(d)

Description : If a fuse of correct size and type blows frequently, ________________. A. try the next higher amperage rating B. try the next lower amperage rating C. look for trouble within the circuit D. reduce the applied voltage 10%

Last Answer : Answer: C

Description : A fuse that blows often should be replaced only with a fuse of _____________. A. the recommended current and voltage rating B. higher current and voltage rating C. higher current and lower voltage rating D. lower current and higher voltage rating

Last Answer : Answer: A

Description : Describe the working of HRC fuse with neat diagram.

Last Answer : Working of HRC Fuse: Under normal conditions, the fuse element is at a temperature below its melting point. Therefore, it carries the normal current without overheating. When a fault ... powder and results in the formation of high resistance substance that helps in quenching the arc. 

Description : Explain construction and characteristics of HRC fuse.

Last Answer : Construction of H.R.C. Fuse: Figure shows the essential parts of a typical H.R.C. fuse. It mainly consist of a heat resisting ceramic body. Both the ends of the cermaic body consists ... particular circuit and for coordination purpose. A typical Fuse characteristic is shown in figure below. 

Description : Describe the difference between fuse and MCCB.

Last Answer : Sr. No Fuse MCCB 1 Fuse melts / fuses in case of excessive load. MCCB trips off in case of excessive load. 2 Fuse needs to be replaced after every ... Generally protects the load against short-circuit. Generally protects the load against different types of faults.

Description : Match the Column ‘A’ with Column ‘B’: Column ‘A’ Column ‘B’ 1. Land breeze blows during (a) winter 2. Sea breeze blows during (b) night 3. We prefer light coloured clothes in (c) daytime 4. We prefer dark coloured clothes in (d) summer

Description : Match the Column ‘I’ with Column ‘II’: Column ‘I’ Column ‘II’ (i) Hot air (a) Low pressure area of the cyclone (ii) Changes in atmospheric pressure cause (b) Sunlight (iii) The eye of the cyclone (c) Blows away the roof (iv) High speed air over the roof (d) Winds, storms and cyclones.

Description : State True or False: (i) Wind always blows from low pressure area to high pressure area. (ii) Wind speed is measured with an anemometer. (iii) Heavy rains accompanied by strong winds are called cyclones. (iv) A hurricane is a storm with strong winds blowing through a funnel-shaped cloud.

Description : Fill in the blanks. 1. The instrument used to measure heat .......... 2. The imaginary lines drawn parallel to the surface of the earth is ......... 3. Sea breeze blows from ......... in the evening. 4. .......... are rain clouds.