1 Answer

Answer :

Annual depreciation as per straight line method, is calculated by the capital cost minus the salvage value, is divided by the number of years of life.

Related questions

Last Answer : Depreciation charges are high in case of thermal plant.

Last Answer : Annual operating expenditure of a power plant consists of fixed charges, semi-fixed charges, running charges.

Last Answer : The power factor of a single phase load can be calculated if the instruments available are three ammeters or three voltmeters.

Description : How to Stand Up Straight

Last Answer : How to Stand Up Straight One of the things that make human beings what they are is the ability to stand up straight. Proper posture enables people to accomplish many tasks, including walking, ... , you can keep your back straight to look impressive, and free yourself from lower back problems.

Description : Depreciation of machines fails under the indirect expenses head. As per income tax regulations, it is calculated by the __________ method. (A) Diminishing balance (B) Sinking fund (C) Multiple straight line (D) Sum of the years digit

Last Answer : (A) Diminishing balance

Description : How to Choose a Birth Control Method

Last Answer : How to Choose a Birth Control Method Birth control methods depend on the couple's needs and commitment to the method. Some couples just need to prevent pregnancy while others wish to avoid sexually- ... unplanned sex, a broken condom or failure to take birth control pills two days in a row.

Description : How to Use the Rhythm Method

Last Answer : How to Use the Rhythm Method The rhythm method is one of the many natural ways of birth control. This technique is based on the length of your menstrual cycle. Here are some tips you can ... their phases. There are numerous natural birth control techniques. Use the one the best suits your needs.

Description : Explain the thermal triggering method of SCR. Enlist different triggering methods of SCR.

Last Answer : Types of Triggering: 1) Forward voltage triggering 2) Thermal triggering (Temperature triggering) 3) Radiation triggering (Light triggering) 4) dv/dt triggering 5) Gate triggering ... generated leakage current increases. This current gets multiplied internally and thyristor is turned on. 

Description : Illustrate with neat wiring diagram a single lamp control by two point method.

Last Answer : Single lamp control by two point method:  This system is commonly used for stair case wiring. It consists of two way switches (the switch operates always in one of the two possible positions) the ... the person will change the position of switch S2, so that the lamp will be switched OFF'.

Description : Draw and explain vacuum impregnation method of varnishing.

Description : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Last Answer : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Description : Describe fire extinguishing method.

Last Answer : (i) Carbon Dioxide Extinguishing Systems  This type is the most suitable & widely recommended one for electrical fires. Carbon dioxide (CO2) extinguishers are normally Class C ... particles to expand chemically inhibiting combustion and expelling the oxygen thereby smothering the flames.

Description : Draw and explain bulk correction method for power factor & control.

Last Answer : Bulk correction method for power factor & control: i) Here individual starter controls the capacitors located at distribution panel. ii) Centralized compensation is employed in large industrial plants where many ... capacitor units in steps to maintain P.F. more than preset limit (0.95). 

Description : Explain energy conservation method in lighting system by using installation of separate transformer / servo stabilizer.

Last Answer : Energy conservation techniques by installation of separate transformer / servo stabilizer: The luminous efficiency of lamps depends upon the voltage applied across the terminals. It gives its best ... the voltage constant in that installation for giving best luminous efficiency of lamps.

Description : Merits of two wattmeter method

Last Answer : Advantages of Two Wattmeter Method for 3-Phase Power Measurement: 1) It is used for balanced as well as unbalanced load. 2) For the star type load, it is not necessary to ... reactive volt-amperes for balanced loads also. 7) The circuit connections are independent of load connection.

Description : Write one advantage and one disadvantage each for spring control method and gravity control method.

Last Answer : Advantages of Spring Control Method: 1) The spring-controlled meters may be used in any position. 2) In some instruments, springs can be used as current leads. 3) As springs are light in weight ... only. 2) Scale is non-uniform. 3) Control weights add to the weight of instrument.

Description : State any two disadvantages of one wattmeter method of measurement of 3 phase power.

Last Answer : State any two disadvantages of one wattmeter method of measurement of 3 phase power. Disadvantages of one wattmeter method:- 1. Only used for balanced load 2. It can not be used for ... connection then neutral point must be available 4. Delta connection must be opened to connect current coil.

Description : With neat diagram explain calibration of energy meter by direct loading method.

Last Answer : Calibration of Energy Meter by Direct Loading Method:  There are three methods for testing/calibration:  1. Long period dial test  2. Using rotary sub- standard meter  3. Using precision grade instruments  All ... of substandard meter in kWh  Then % error = [(D - DS)/DS] x 100

Description : Explain V- I method of measurement of medium resistance. 

Last Answer : In this method, use suitable source, ammeter and voltmeter and connect them as shown in the above diagram. Take reading of voltmeter and ammeter, then value of resistance = R = V/I Ω To minimise the error take 4 to 5 observation for the same resistance and take their average.

Description : Explain spring control method with neat diagram.

Last Answer : Spring Control Method: As shown in the figure the inner ends of the both springs are attahced to the spindle ,while outer end of upper spring is attached to the lever and outer end of ... the springs are twisted in opposite direction to the motion of pointer and produce controlling torque.

Description : List one advantage and one disadvantage of one wattmeter method. 

Last Answer : Advantages:  1) Only one wattmeter is used.  2) Less number of connections.  3) Cost required is less.  Disadvantages:  1) Used only for 3- Φ balanced load and not for ... be accessible for connecting the Pressure coil.  3) Delta connection must be opened to connect current coil. 

Description : List any four errors in induction type energy meter. Give method of compensation for each.

Last Answer : Errors in Induction Type Energy Meter with their Compensation:  1) Error due to friction: This error can be compensated by the additional shading band provided on the shunt electromagnet.  2) Phase ... error: This error can be compensated by providing a flux diverter' to the current magnet. 

Description : The self GMD method is used to evaluate

Last Answer : The self GMD method is used to evaluate inductance and capacitance

Description : The power consumed by a balanced 3-ph load is measured by two-wattmeter method. The meter readings are 8 kW and 4 kW. The power factor of the load is (A) zero (B) 0.5 (C) between zero and 0.5 (D) between 0.5 and unity

Last Answer : The power consumed by a balanced 3-ph load is measured by two-wattmeter method. The meter readings are 8 kW and 4 kW. The power factor of the load is between 0.5 and unity

Description : Compared to Gauss-Seidel method, Newton-Raphson method takes : A. less number of iterations and more time per iteration B. less number of iterations and less time per iteration C, more number of iterations and more time per iteration D. more number of iterations and less time per iteration

Last Answer : Compared to Gauss-Seidel method, Newton-Raphson method takes : A. less number of iterations and more time per iteration B. less number of iterations and less time per iteration ... of iterations and more time per iteration D. more number of iterations and less time per iteration

Description : The bridge method commonly used for finding mutual inductance is (A) Heaviside Campbell bridge (B) Schering bridge (C) De Sauty bridge (D) Wien bridge

Last Answer : The bridge method commonly used for finding mutual inductance is Heaviside Campbell bridge

Last Answer : Plugging braking method can bring the locomotive to dead stop.

Last Answer : Plugging method of braking is generally used in elevators.

Last Answer : Regenerative method of braking is based on that back e.m.f. is equal to the applied voltage.

Last Answer : The main disadvantage of the Ward-Leonard control method is high initial cost, high maintenance cost, low efficiency at light loads.

Last Answer : For constant torque drive armature voltage control speed control method is preferred.

Last Answer : Speed control by Ward Leonard method gives uniform speed variation in both directions.

Description : What is the bisection method?

Description : Why do we use Gauss elimination method?

Description : What is Newton Raphson Method example?

Description : Out of the following, the depreciation calculated by the __________ method is the maximum. (A) Diminishing balance (B) Straight line (C) Sum of the years digit (D) Sinking fund

Last Answer : A) Diminishing balance

Description : While calculating performance of medium transmission line, what assumptions are made in case of (i) Nominal 'T' Method (ii) Nominal 'TT' Method. 

Last Answer : (i) Assumptions are made in case of Nominal 'T' Method:  a. It is assume that line capacitance is connected at center of transmission line. b. It is assume that half ... assumed that transmission line resistance & reactance per phase is connected in between two half transmission line capacitance 

Description : For 11kV line the inductance per km per phase will be of the order of:  (A) 1 H (B) 0.1 H (C) 1 mH (D) 0.1 mH

Last Answer : For 11kV line the inductance per km per phase will be of the order of: 1 mH

Description : why Novelty Chemicals bought a Motor Vehicle for$110,000 on January 5, 2016. The estimated usefullife of the vehicle is ten years. The disposal valueis estimated at $10,000. Annual depreciation is onthe straight line method?

Last Answer : Novelty Chemicals bought a Motor Vehicle for$110,000 on January 5, 2016. The estimated usefullife of the vehicle is ten years. The disposal valueis estimated at $10,000. Annual ... for annualdepreciation.d) The Balance Sheet extracts for motor vehicle and itsrelated depreciation.full question