In Hopknison demand rate or two part tariff the demand rate or fixed charges are?

by

1 Answer

Answer :

In Hopknison demand rate or two part tariff the demand rate or fixed charges are dependent upon the maximum demand of the consumer.

by

Related questions

Define the following terms related to tariff: (i) Connected load (ii) Unit consumed (iii) Fixed charges (iv) Electricity Tax

Description : Define the following terms related to tariff: (i) Connected load (ii) Unit consumed (iii) Fixed charges (iv) Electricity Tax 

Last Answer : (i) Connected load  It is the sum of the power ratings (Watts or kW or MW) of all devices and machines existing (installed) in the premises of consumer. It is used to decide the ... a percentage of the total electricity bill which includes all amounts that go to the electricity supply agency. 

A consumer has to pay lesser fixed charges in?

Last Answer : A consumer has to pay lesser fixed charges in maximum demand tariff.

In two part tariff, variation in load factor will affect?

Last Answer : In two part tariff, variation in load factor will affect operating or running charges.

For any type of consumer the ideal tariff is?

Last Answer : For any type of consumer the ideal tariff is three part tariff.

Depreciation charges are high in case of?

Last Answer : Depreciation charges are high in case of thermal plant.

In a power plant if the maximum demand on the plant is equal to the plant capacity, then?

Last Answer : In a power plant if the maximum demand on the plant is equal to the plant capacity, then plant reserve capacity will be zero.

Maximum demand on a power plant is?

Last Answer : Maximum demand on a power plant is the greatest of all "short time interval averaged" demand during a period.

Approximate estimation of power demand can be made by?

Last Answer : Approximate estimation of power demand can be made by load survey method, statistical methods, mathematical method, economic parameters.

Demand factor is defined as?

Last Answer : Demand factor is defined as maximum demand/connected load.

List the different types of tariff.

Description : List the different types of tariff.

Last Answer : Various types of Tariff:-  1) Flat-demand Tariff  2) Simple-demand Tariff or Uniform Tariff  3) Flat-rate Tariff  4) Step-rate Tariff  5) Block-rate Tariff  6) Two-part Tariff  7) Maximum demand Tariff ... c) KW and KVAR Tariff 10) TOD (Time of Day) Tariff 11) TOU ( Time of Usage) Tariff

Define the terms: i) Tariff ii) Fuel surcharge iii) Electricity Duty iv) Connected load

Description : Define the terms: i) Tariff ii) Fuel surcharge iii) Electricity Duty iv) Connected load

Last Answer : i) Tariff: The rate at which a consumer is charged for the consumption of electricity is called as tariff. OR The amount of money framed by the supplier for the supply of electrical energy ... is the total wattage of all appliances which are used by the consumer on his sanctioned connection. 

Discuss how power factor tariff results into energy conservation.

Description : Discuss how power factor tariff results into energy conservation.

Last Answer : Power factor tariff results into energy conservation: i) Applying incentives and penalties according to power factor is an effective way, which enables consumer to improve power factor so that he can ... finally leads to reduction in the current drawn by the load and helps for energy conservation.

State the incentives and penalties related with power factor tariff.

Description : State the incentives and penalties related with power factor tariff.

Last Answer : Incentives and penalties related with power factor tariff: In addition to basic tariff (Maximum Demand Tariff / KVA Maximum Demand Tariff / Load factor tariff) the tariff in which P.F. of ... industrial consumer/H.T/ commercial consumers with contract demand above 80 kw/ 100Kva/107 hp consumer.

What is Time of Day tariff? How it help in energy conservation?

Description : What is Time of Day tariff? How it help in energy conservation?

Last Answer : Time-off-day tariff:- In addition to basic tariff (Maximum Demand Tariff / KVA Maximum Demand Tariff / Load factor tariff /also the tariff in which P.F. of industrial consumer is taken ... the rated load for longer times of the day their overall efficiency gets higher helping to conserve energy.

State the objectives of tariff systems.

Description : State the objectives of tariff systems.

Last Answer : Objectives of tariff system: 1) Recover judiciously and legally capital investment made on electricity generation, transmission & distribution. 2) Recover judiciously and legally the cost of operation, supplies ... for high power factor. 8) Gain a suitable profit on the capital investment.

The main objectives in framing tariff are:

Description : The main objectives in framing tariff are:  (A) The consumers must readily understand the tariffs (B) The tariff must be equitable amongst different consumers (C) Tariffs can be modified from time to time (D) All of the above

Last Answer : The main objectives in framing tariff are:  (A) The consumers must readily understand the tariffs (B) The tariff must be equitable amongst different consumers (C) Tariffs can be modified from time to time (D) All of the above

Can the electric field between two positive charges be zero?

Description : Can the electric field between two positive charges be zero?

Last Answer : It  can  only  if  they  have  equal  charges.

Is Rittenhouse's mom going to face charges?

Description : Is Rittenhouse's mom going to face charges?

Last Answer : I certainly hope so, I feel she enabled him. And at 17, isn’t he still considered a minor?

The colour band on the extreme left in general purpose fixed resistors represents:

Description : The colour band on the extreme left in general purpose fixed resistors represents: A) Tolerance B) First significant digit C) Wattage Rating D) Voltage Rating

Last Answer : The colour band on the extreme left in general purpose fixed resistors represents: First significant digit

In a synchronous generator if the excitation increased from a low value to normal value, with a fixed load

Description : In a synchronous generator if the excitation increased from a low value to normal value, with a fixed load  (A) The armature current increases and the power factor decreases  (B) The armature ... but is lagging  (D) The armature current decreases and the power factor increases and is leading

Last Answer : In a synchronous generator if the excitation increased from a low value to normal value, with a fixed load The armature current decreases and the power factor increases and is leading

A circuit that binds the upper or lower extreme of a waveform to a fixed DC voltage level is called ______

Description : A circuit that binds the upper or lower extreme of a waveform to a fixed DC voltage level is called ______ A) DC voltage restorer B) Clamping circuit C) Both A and B D) None of these

Last Answer : A circuit that binds the upper or lower extreme of a waveform to a fixed DC voltage level is called ______ A) DC voltage restorer B) Clamping circuit C) Both A and B D) None of these

The operating speed of a synchronous motor can be changed to new fixed value by?

Last Answer : The operating speed of a synchronous motor can be changed to new fixed value by changing frequency.

What is Part Programming? Enlist Basic Requirement for part programming with suitable example.

Description : What is Part Programming? Enlist Basic Requirement for part programming with suitable example.

Last Answer : Definition: The part program is a sequence of instructions, which describe the work, which has to be done on a part, in the form required by a computer under the control of a numerical ... Defining the work part geometry. (b) Defining the repetition work. (c) Specifying the operation sequence

Which of the following is not a part of transformer installation?

Description : Which of the following is not a part of transformer installation?  (A) Conservator (B) Breather (C) Buchholz Relay (D) Exciter

Last Answer : Which of the following is not a part of transformer installation?  (A) Conservator (B) Breather (C) Buchholz Relay (D) Exciter

Part of the transformer which is most subject to damage from overheating is?

Description : Part of the transformer which is most subject to damage from overheating is?

Last Answer : Part of the transformer which is most subject to damage from overheating is winding insulation.

How to Slow Your Heart Rate ?

Description : How to Slow Your Heart Rate ?

Last Answer : How to Slow Your Heart Rate Tachycardia or palpitation is a condition where your heart rate is higher than the normal value of 60-100 beats per minute (bpm) . This is usually a symptom ... An early detection of any illness is very important to prevent it from getting worse and avoid complications.

How to Calculate Your Heart Rate ?

Description : How to Calculate Your Heart Rate ?

Last Answer : How to Calculate Your Heart Rate The heart rate reflects your current state of health, more specifically, it shows your fitness level and at some point, your metabolic rate. It is only a rough estimate ... often feel light, active, and happy each time, since they are clear signs of good health.

What are the different heart rate monitors and how to make a choice?

Description : What are the different heart rate monitors and how to make a choice?

Last Answer : What are the different heart rate monitors and how to make a choice? The time when only professional athletes could afford training with a heart rate monitor is already in the past. Today literally anyone ... is that the device can withstand dives to a depth of more than 10 meters. Happy choice!

Draw venture meter and write steps to measure flow rate.

Description : Draw venture meter and write steps to measure flow rate.

Last Answer : Venturi meter consists of three sections that is converging section, throat section and diverging section. The flow is introduced to the meter through the inlet with diameter D' . The inclined angle ... to 15o . Flow rate is proportional to the square root of the differential pressure.

Define : (i) CMMR ii) Slew rate

Description : Define : (i) CMMR ii) Slew rate

Last Answer : (i) CMRR:- The CMRR is defined as the ratio of the powers of the differential gain over the common-mode gain, measured in positive decibels (thus using the 20 log rule): As differential gain should ... respond to an abrupt change of input level It is measured as a voltage change in a given time.

If a signal band limited to fm is sampled at a rate less than 2fm, then the constructed signal will be

Description :  If a signal band limited to fm is sampled at a rate less than 2fm, then the constructed signal will be A) Large in amplitude B) Small in amplitude C) Distorted D) Distortion less

Last Answer :  If a signal band limited to fm is sampled at a rate less than 2fm, then the constructed signal will be Distorted 

The unit heat rate characteristic of a thermal power unit shows :

Description : The unit heat rate characteristic of a thermal power unit shows :  (A) Heat input per kWh of output versus the megawatt output of unit  (B) Heat input per kW of output versus the megawatt output ... hour output of unit  (D) Heat input per kW of output versus the megawatt hour output of unit

Last Answer : The unit heat rate characteristic of a thermal power unit shows : Heat input per kWh of output versus the megawatt output of unit 

Liquid flow rate is measured using

Description : Liquid flow rate is measured using (A) a pirani gauge (B) a pyrometer (C) an orifice plate (D) a bourdon tube

Last Answer : Liquid flow rate is measured using an orifice plate

The initial rate of rise of current through a coil of inductance 10 H when suddenly...

Description : The initial rate of rise of current through a coil of inductance 10 H when suddenly connected to a D.C. supply of 200 V is_______Vs.

Last Answer : The initial rate of rise of current through a coil of inductance 10 H when suddenly connected to a D.C. supply of 200 V is 20 Vs

The rate of rise of current through an inductive coil is maximum?

Description : The rate of rise of current through an inductive coil is maximum?

Last Answer : The rate of rise of current through an inductive coil is maximum at the start of the current flow.

The rate of acceleration on suburban or urban service is in the range?

Last Answer : The rate of acceleration on suburban or urban service is in the range 1.6 to 4.0 km phps.

If somebody invented "fart vision" glasses, how much would you pay for them?

Description : If somebody invented "fart vision" glasses, how much would you pay for them?

Last Answer : 4000$

Explain data transfer mechanism in I2C protocol.

Description : Explain data transfer mechanism in I2C protocol. Compare it with CAN and USB protocol based on bit rate and area of applications.

Last Answer : I2C (Inter-Integrated Circuit): I2C stands for Inter-Integrated Circuit. I2C is a serial protocol. It was developed by Philips Semiconductor. I2C bus have two communication lines. One is serial data ( ... Mbps this is used for lower speed devices. Using USB we can connect upto 127 devices.

.A tariff that is levied as a fixed charge per unit of imports is known as a (a) Specific tariff (b) Ad- valorem tariff © Import tariff (d) Export tariff.

Description : .A tariff that is levied as a fixed charge per unit of imports is known as a (a) Specific tariff (b) Ad- valorem tariff © Import tariff (d) Export tariff.

Last Answer : a) Specific tariff

When tariff is imposed on imports which of the following will increase? (a) Domestic output. (b) Domestic demand. © Domestic price. (d) Domestic consumption.

Description : When tariff is imposed on imports which of the following will increase? (a) Domestic output. (b) Domestic demand. © Domestic price. (d) Domestic consumption.

Last Answer : © Domestic price.

From the information given below, calculate Debt service coverage Ratio– Net profit after interest and Tax Rs. 40,000, Depreciation Rs. 5,000, Rate of Income Tax 50%, 10% Mortgage Debentures Rs. 60,000. Fixed Interest Charges Rs. 6,000, Debenture Redemption Fund Appropriation of Outstanding Debentures 10%. (A) 4•06 times (B) 5•06 times (C) 6•06 times (D) 7•06 times

Description : From the information given below, calculate Debt service coverage Ratio- Net profit after interest and Tax Rs. 40,000, Depreciation Rs. 5,000, Rate of Income Tax 50%, 10% Mortgage Debentures Rs. 60,000. Fixed Interest Charges Rs. 6 ... . (A) 4 06 times (B) 5 06 times (C) 6 06 times (D) 7 06 times

Last Answer : Answer: 4•06 times

Draw and explain fixed dome type biogas plant.

Description : Draw and explain fixed dome type biogas plant. 

Last Answer : Diagram of fixed dome type biogas plant: Explanation of layout of biogas plant by the method of fermentation conversion  1. Foundation : Biomass plant consists of pit excavated to desire ... the slurry from the top of the dome with the help of stirrer which is at digester chamber.

Explain the concept of following terms : (i) Connected load (ii) Maximum demand

Last Answer : 1. Connected Load: It is the sum of load of all equipment's connected to supply system which are in use or not in use of each consumer. OR   The sum of connected load of all consumers ... is the maximum load which a consumer uses at a particular time period out of his total connected load. 

A generating station has a maximum demand of 500 MW. The annual load factor is 50 percent. The energy

Description : A generating station has a maximum demand of 500 MW. The annual load factor is 50 percent. The energy generated per annum will be: A) 2.19 x 106 MWhr B) 600 MWhr C) 250 MWhr D) 7.50 x 106 MWhr

Last Answer : A generating station has a maximum demand of 500 MW. The annual load factor is 50 percent. The energy generated per annum will be: 2.19 x 106 MWhr 

Flat rate parcel rates Flat Rate Parcel Boxes size Dimension of boxes (in mm) Weight (in Kg.) Tariff (in Rs.) Small - S 250*50*300 0 to 1 125 Medium - M 250*100*300 Above 1 to 2.5 200 Large - L 300*250*200 Above 2.5 to 5 400

Description : Flat rate parcel rates Flat Rate Parcel Boxes size Dimension of boxes (in mm) Weight (in Kg.) Tariff (in Rs.) Small - S 250*50*300 0 to 1 125 Medium - M 250*100*300 Above 1 to 2.5 200 Large - L 300*250*200 Above 2.5 to 5 400

Last Answer : Large - L 300*250*200 Above 2.5 to 5 400

The effective rate of protection (a). distinguishes between tariffs that are effective and those that are ineffective (b). is the minimum level at which a tariff becomes effective in limiting imports (c). shows how effective a tariff is in raising revenue for the government (d). shows the increase in value added for domestic production that a particular tariff structure makes possible, in percentage terms

Description : The effective rate of protection (a). distinguishes between tariffs that are effective and those that are ineffective (b). is the minimum level at which a tariff becomes effective in ... in value added for domestic production that a particular tariff structure makes possible, in percentage terms

Last Answer : d). shows the increase in value added for domestic production that a particular tariff structure makes possible, in percentage terms

What is three part tariff?

Description : What is three part tariff?

Last Answer : The total charge comprised of fixed charge made during billing period, charge per kW of maximum demand and charge per kWh of energy consumed.

After inviting tenders for supply of raw materials, two quotations are received as follows— Supplier P Rs. 2.20 per unit, Supplier Q Rs. 2.10 per unit plus Rs. 2,000 fixed charges irrespective of the units ordered. The order quantity for which the purchase price per unit will be the same— (a) 22,000 units (b) 20,000 units (c) 21,000 units (d) None of the above.

Description : After inviting tenders for supply of raw materials, two quotations are received as follows- Supplier P Rs. 2.20 per unit, Supplier Q Rs. 2.10 per unit plus Rs. 2,000 fixed charges irrespective of the units ordered. The ... (a) 22,000 units (b) 20,000 units (c) 21,000 units (d) None of the above.

Last Answer : (b) 20,000 units

Which of the following is not a fixed cost? (1) Salaries of administrative staff (2) Rent of factory building (3) Property taxes (4) Electricity charges

Description : Which of the following is not a fixed cost? (1) Salaries of administrative staff (2) Rent of factory building (3) Property taxes (4) Electricity charges

Last Answer : (1) Salaries of administrative staff Explanation: Fixed costs arc business expenses that are not dependent on the level of goods or services produced by the business. They tend to be time- ... and are often referred to as overhead costs. The salaries of administrative staff are variable costs.