In a shaded pole motor, the shading coil usually consist of?

by

1 Answer

Answer :

In a shaded pole motor, the shading coil usually consist of a single turn of heavy copper wire which is short-circuited and carries only induced current.

by

Related questions

In case of a shaded pole motor the direction of rotation of the motor is?

Last Answer : In case of a shaded pole motor the direction of rotation of the motor is from main pole to shaded pole.

A shaded pole motor can be used for?

Last Answer : A shaded pole motor can be used for toys, hair dryers, circulators etc.

In a shaded pole single-phase motor, the revolving field is produced by the use of?

Last Answer : In a shaded pole single-phase motor, the revolving field is produced by the use of shading coils.

With a neat sketch give the working of shaded pole induction motor.

Description : With a neat sketch give the working of shaded pole induction motor.

Last Answer : Explanation: It has squirrel cage rotor and salient pole stator. The stator poles are shaded partially by short circuited conductor band to create the phase difference between the fluxes emerging from shaded ... rotating magnetic field in the air-gap and torque is exerted on the squirrel cage rotor.

State two applications of 1) Shaded pole motor 2) Universal motor

Description : State two applications of 1) Shaded pole motor 2) Universal motor

Last Answer : (i)Applications of Shaded pole motor: 1. Small fans 2. Toy motors 3. Hair dryers 4. Ventilators 5. Electric clocks 6. Record players 7. Motorized valves 8. Gramophones 9. Photocopying ... 5. Portable Drilling Machines 6. Electric Shavers 7. Mechanical computing Machines 8. Machine Tools etc.

Locked rotor current of a shaded pole motor is?

Last Answer : Locked rotor current of a shaded pole motor is slightly more than full load current.

The shaded pole motor is used for?

Last Answer : The shaded pole motor is used for low starting torque.

The range of efficiency for shaded pole motors is?

Last Answer : The range of efficiency for shaded pole motors is 5% to 35%.

The torque produced in induction type relay (shaded pole structure) is?

Last Answer : The torque produced in induction type relay (shaded pole structure) is inversely proportional to the square of the current.

The power factor of a single-phase induction motor is usually?

Last Answer : The power factor of a single-phase induction motor is usually lagging.

In a A.C. series motor armature coils are usually connected to commutator?

Last Answer : In a A.C. series motor armature coils are usually connected to commutator through resistance.

The efficiency of a properly designed synchronous motor will usually fall in range?

Last Answer : The efficiency of a properly designed synchronous motor will usually fall in range 85 to 95%.

If the field winding of an unloaded salient pole synchronous motor is open circuited, the motor will?

Last Answer : If the field winding of an unloaded salient pole synchronous motor is open circuited, the motor will stop.

what will happen when excitation of an unloaded salient pole synchronous motor suddenly gets disconnected?

Description : what will happen when excitation of an unloaded salient pole synchronous motor suddenly gets disconnected?

Last Answer : When excitation of an unloaded salient pole synchronous motor suddenly gets disconnected the motor will stop.

The adjustment of position of shading bands, in an energy meter is done to provide?

Last Answer : The adjustment of position of shading bands, in an energy meter is done to provide friction compensation.

State the function of overload coil and No volt coil in dc motor starter.

Description : State the function of overload coil and No volt coil in dc motor starter.

Last Answer : Function of Overload Coil: When DC motor is overloaded, the overload coil carries the overload current and produces strong magnetic field to attract a plunger, which short the terminals of ... dc motor is prevented from restarting automatically on recovery of supply without starter and protected.

Power factor of an inductive circuit is usually improved by connecting capacitor to it in?

Description : Power factor of an inductive circuit is usually improved by connecting capacitor to it in?

Last Answer : Power factor of an inductive circuit is usually improved by connecting capacitor to it in parallel.

The braking retardation is usually in the range?

Last Answer : The braking retardation is usually in the range 10 to 15 km phps.

The voltage used for suburban trains in D.C. system is usually?

Last Answer : The voltage used for suburban trains in D.C. system is usually 600 to 750 V.

Overload capacity of diesel engines is usually restricted to?

Last Answer : Overload capacity of diesel engines is usually restricted to 2 percent.

Pole Climbing & Attention to Street Light, Jumpers & Insulator Checking & Replacement of Insulator?

Description : Pole Climbing & Attention to Street Light, Jumpers & Insulator Checking & Replacement of Insulator?

Last Answer : Ans. (a) Before pole climbing, supply to be disconnected (b) While climbing safety belt, helmet to be used. (c) While attending street light, safety board to be displayed. (d) While providing jumpers ... non-essential (g) Essential loads to be brought to single point. (h) Then connect UPS supply.

How to Rig a Fishing Pole

Description : How to Rig a Fishing Pole

Last Answer : How to Rig a Fishing Pole Fishing can be a really exciting outdoor experience, not just a nap in the middle of a lake while holding a complicated stick. Rigging a fishing pole ... these steps, you can prepare your fishing equipment properly for a weekend afternoon of recreation and relaxation.

How to Build a Pole Barn ?

Description : How to Build a Pole Barn ?

Last Answer : How to Build a Pole Barn How to Build a Pole Barn One of the simplest installations that you can make in your property is a pole barn. Usually found on agricultural land, a pole barn ... . Pond construction is also helpful if you want to add some extra features for your small household farm.

A 50 Hz, 4 pole turboalternator rated at 20 MVA. 13.2 KV has an inertia constant H = 4 KW sec/KVA.

Description : A 50 Hz, 4 pole turboalternator rated at 20 MVA. 13.2 KV has an inertia constant H = 4 KW sec/KVA. The K.E. stored in the rotor at synchronous speed is

Last Answer : A 50 Hz, 4 pole turboalternator rated at 20 MVA. 13.2 KV has an inertia constant H = 4 KW sec/KVA. The K.E. stored in the rotor at synchronous speed is 80 MJ

The armature current on symmetrical 3 phase short circuit of a synchronous machine (salient pole)

Description : The armature current on symmetrical 3 phase short circuit of a synchronous machine (salient pole)  (A) has q -axis current only (B) has d -axis current only (C) has both d and q axis currents (D) cannot be divided between q and d axis currents

Last Answer : The armature current on symmetrical 3 phase short circuit of a synchronous machine (salient pole) has d -axis current only

Salient pole rotor is use for which speed?

Description : Salient pole rotor is use for which speed?

Last Answer : Salient pole rotor is use for low and medium speed prime movers.

Explain MOSFET gate drive circuit and totem pole configuration.

Description : Explain MOSFET gate drive circuit and totem pole configuration.

Last Answer : MOSFET gate drive circuit: The turning on and turning off of MOSFET can be controlled from gate to source voltage signal. If the gate to source voltage of MOSFET exceeds threshold ... this configuration, the two switches (transistors) are used in totem pole arrangement with a comparator.

Single phase induction motor usually operates on?

Last Answer : Single phase induction motor usually operates on 0.6 power factor lagging.

The motor used on small lathes is usually?

Last Answer : The motor used on small lathes is usually single-phase capacitor run motor.

What do you mean by coil?

Description : What do you mean by coil?

Last Answer : Ans. Having one or more turns connected in series is called coil.

Name the material used for :- (i) Moving coil (ii) Permanent magnet in PMMC instrument.

Description : Name the material used for :- (i) Moving coil (ii) Permanent magnet in PMMC instrument.

Last Answer : (i) Material used for Moving coil: Copper, Aluminum( some times)  (ii) Permanent magnets are made of special alloys such as :  Aluminum-Nickel-Cobalt (Alnicos)  Strontium-Iron  Neodymium-Iron-Boron  Samarium-Cobalt.

State the material used for moving coil and former for PMMC instruments.

Description : State the material used for moving coil and former for PMMC instruments. 

Last Answer : Material Used for Moving Coil and Former for PMMC Instruments:  Material used for moving coil: Copper  Material used for Former: Aluminium

The purpose of the restraining coil in a biased differential relay is

Description : The purpose of the restraining coil in a biased differential relay is  (A) To reduce CT saturation during fault.  (B) To increase the sensitivity of the relay.  (C) To match the transformation ratio.  (D) To limit the spill current through the relay during heavy external fault.

Last Answer : d

Permanent magnet moving coil instruments are used for

Description : Permanent magnet moving coil instruments are used for

Last Answer : PMME are mostly used for measuring voltage and current.

Peterson coil is used for :

Description : Peterson coil is used for :  (A) shunt compensation of lines (B) grounding of system neutral (B) reduce fault currents (D) connecting interconnected systems

Last Answer : Peterson coil is used for : grounding of system neutral

A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned

Description : A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carrier current capacity is 50 mA. The torque on the coil is

Last Answer : A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carrier current capacity is 50 mA. The torque on the coil is 200µNm

A Peterson coil is ________

Description : A Peterson coil is ________ A) An arc generating coil B) An arc suppressing coil C) An arc inducing coil D) None of these

Last Answer : A Peterson coil is An arc suppressing coil

The self inductance of a coil can be measured using

Description : The self inductance of a coil can be measured using (A) Wien’s Bridge (B) Schering Bridge (C) Anderson’s Bridge (D) Wheatstone Bridge

Last Answer : The self inductance of a coil can be measured using Anderson’s Bridge

A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an

Description : A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an ammeter with full scale deflection of 100 mA, the required shunt resistance is (A) 1 Ω (B) 1.001 Ω (C) 0.5 Ω (D) 10 Ω

Last Answer : A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an ammeter with full scale deflection of 100 mA, the required shunt resistance is 1.001 Ω

A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up

Description : A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up to 300 V, the external resistance to be connected in series with the instrument is (A) 9997 Ω (B) 10000 Ω (C) 997 Ω (D) 10003 Ω

Last Answer : A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up to 300 V, the external resistance to be connected in series with the instrument is 9997 Ω

lt the length, number of turns and area of a coil are doubled, the inductance of the coil

Description : lt the length, number of turns and area of a coil are  doubled, the inductance of the coil

Last Answer : lt the length, number of turns and area of a coil are  doubled, the inductance of the coil is quadrupled

The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is

Description : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is (A) 11% (B) 9% (C) 1.1% (D) 3%

Last Answer : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is 11%

The initial rate of rise of current through a coil of inductance 10 H when suddenly...

Description : The initial rate of rise of current through a coil of inductance 10 H when suddenly connected to a D.C. supply of 200 V is_______Vs.

Last Answer : The initial rate of rise of current through a coil of inductance 10 H when suddenly connected to a D.C. supply of 200 V is 20 Vs

The rate of rise of current through an inductive coil is maximum?

Description : The rate of rise of current through an inductive coil is maximum?

Last Answer : The rate of rise of current through an inductive coil is maximum at the start of the current flow.

The inductance of a coil can be increased by?

Description : The inductance of a coil can be increased by?

Last Answer : The inductance of a coil can be increased by choosing core material having high relative permeability.

Inductance of coil?

Description : Inductance of coil?

Last Answer : Inductance of coil increases with the increase in supply frequency.

Inductance of a coil Varies?

Description : Inductance of a coil Varies?

Last Answer : Inductance of a coil Varies as directly as the cross-sectional area of magnetic core and inversely as the length of the iron path.

In a low power factor wattmeter the compensating coil is connected?

Last Answer : In a low power factor wattmeter the compensating coil is connected in series with pressure coil.

In a low power factor wattmeter the pressure coil is connected?

Last Answer : In a low power factor wattmeter the pressure coil is connected to the load side of the current coil.

The multiplier and the meter coil in a voltmeter are in?

Last Answer : The multiplier and the meter coil in a voltmeter are in series.