Speed control of a universal motor is achieved by?

by

1 Answer

Answer :

Speed control of a universal motor is achieved by varying field flux with tapped field windings, connecting rheostat in series, applying variable voltage by means of silicon controlled rectifier, applying variable voltage by means of variable auto-transformer.

by

Related questions

The speed control of universal motor used for sewing machines is by?

Last Answer : The speed control of universal motor used for sewing machines is by varying the resistance.

The speed of a universal motor is usually reduced by using?

Last Answer : The speed of a universal motor is usually reduced by using gearing.

The speed/load characteristics of a universal motor is same as that of?

Last Answer : The speed/load characteristics of a universal motor is same as that of D.C. series motor.

The speed of a universal motor is generally reduced by using?

Last Answer : The speed of a universal motor is generally reduced by using gear trains.

The speed of a three-phase induction motor is controlled by variable voltage variable frequency control

Description : The speed of a three-phase induction motor is controlled by variable voltage variable frequency control (i.e. keeping V/f constant). As the frequency is reduced, the slip at maximum torque  (1) Decreases (2) Increases (3) Remains constant (4) None of the above

Last Answer : The speed of a three-phase induction motor is controlled by variable voltage variable frequency control (i.e. keeping V/f constant). As the frequency is reduced, the slip at maximum torque Increases 

Which motor has the poorest speed control?

Last Answer : Series motor has the poorest speed control.

What are the speed control methods of dc motor?

Description : What are the speed control methods of dc motor?

Last Answer : Field control of DC motor Armature control of DC motor

speed control methods of three phase induction motor?

Description : speed control methods of three phase induction motor?

Last Answer : Speed control of three phase induction motor

Speed control of the motor using TRIAC

Description : Speed control of the motor using TRIAC

Last Answer : Speed control of the motor using TRIAC:  This basic phase triggering circuit uses the triac in series with the motor across an AC sinusoidal supply. The variable resistor, VR1 is used ... meaning that it may not trigger at the exact same point for each positive and negative half cycle.

A universal motor is one which?

Last Answer : A universal motor is one which can be operated either on D.C. or A.C. supply at approximately the same speed and output.

In a universal motor, the most common cause of brush sparking is?

Last Answer : In a universal motor, the most common cause of brush sparking is open armature winding, shorted armature winding, shorted field winding, high commutator mica.

The direction of rotation of universal motor can be reversed the by reversing the flow of current through?

Last Answer : The direction of rotation of universal motor can be reversed the by reversing the flow of current through either armature winding or field winding.

State working principle of universal motor with the help of diagram.

Description : State working principle of universal motor with the help of diagram.

Last Answer : Working Principle of Universal motor : It is modified DC series motor which can work on AC as well as DC supply. According to basic motor principle, whenever a current carrying conductor is placed in magnetic ... They have nearly same operating characteristic for both AC and DC supply. 

applications of each: i) Universal motor ii) Stepper motor.

Description : applications of each: i) Universal motor ii) Stepper motor.

Last Answer : i) Applications of Universal motor: 1) portable drills 2) hair dryers 3) grinders 4) mixers 5) table-fans 6) blowers 7) polishers 8) Kitchen appliances  ii) Applications of Stepper motor ... 7) robotics 8) CNC machine 9) Control systems 10) Biomedical applications 10) XY recorder 11) plotters

State two applications of 1) Shaded pole motor 2) Universal motor

Description : State two applications of 1) Shaded pole motor 2) Universal motor

Last Answer : (i)Applications of Shaded pole motor: 1. Small fans 2. Toy motors 3. Hair dryers 4. Ventilators 5. Electric clocks 6. Record players 7. Motorized valves 8. Gramophones 9. Photocopying ... 5. Portable Drilling Machines 6. Electric Shavers 7. Mechanical computing Machines 8. Machine Tools etc.

Draw and explain working of universal motor. Give two applications of universal motor.

Description : Draw and explain working of universal motor. Give two applications of universal motor.

Last Answer : Figure of Universal motor:   Operation of universal motor on A.C. and D.C. supply:   *A universal motor works on either DC or single phase AC supply. When the universal motor is ... , regardless of AC or DC supply, universal motor works on the same principle that DC series motor works.  

A universal motor can run on?

Last Answer : A universal motor can run on either A.C. or D.C.

Usually wide and sensitive speed control is desired in case of?

Last Answer : Usually wide and sensitive speed control is desired in case of colliery winders.

Speed control by Ward Leonard method gives uniform speed variation?

Last Answer : Speed control by Ward Leonard method gives uniform speed variation in both directions.

The armature voltage control of D.C. motor provides?

Last Answer : The armature voltage control of D.C. motor provides constant torque drive.

Armature control of DC motor

Description : Armature control of DC motor

Last Answer : Armature control of DC motor

Field control of DC motor

Description : Field control of DC motor

Last Answer : Field control of DC motor

A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s.

Description : A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be

Last Answer : A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be 474 V

The speed of a 2-pole, 3-phase stepper motor operated by 1200 pulses/min

Description : The speed of a 2-pole, 3-phase stepper motor operated by 1200 pulses/min (A) 100 rpm (B) 200 rpm (C) 400 rpm (D) 800 rpm

Last Answer : The speed of a 2-pole, 3-phase stepper motor operated by 1200 pulses/min 200 rpm

In variable speed motor?

Last Answer : In variable speed motor a weaker commutating field is needed at low speed than at high speed.

The speed of a D.C. motor can be controlled by varying

Description : The speed of a D.C. motor can be controlled by varying  1. Its flux per pole 2. Resistance of armature circuit 3. Applied voltage 4. All of the above

Last Answer : The speed of a D.C. motor can be controlled by varying  1. Its flux per pole 2. Resistance of armature circuit 3. Applied voltage 4. All of the above

The speed of a D.C. shunt motor can be increased by?

Last Answer : The speed of a D.C. shunt motor can be increased by increasing the resistance in field circuit.

As the load is increased the speed of D.C. shunt motor will?

Last Answer : As the load is increased the speed of D.C. shunt motor will reduce slightly.

For the same H.P. rating and full load speed, following motor has poor starting torque?

Last Answer : For the same H.P. rating and full load speed, following motor has poor starting torque differentially compounded.

The speed of a D.C. series motor is?

Last Answer : The speed of a D.C. series motor is inversely proportional to the armature current.

In a D.C. shunt motor, speed is?

Last Answer : In a D.C. shunt motor, speed is independent of armature current.

In case of a reluctance motor, when the load is increased so that it cannot maintain synchronous speed the motor will?

Last Answer : In case of a reluctance motor, when the load is increased so that it cannot maintain synchronous speed the motor will run as induction motor.

Centrifugal switch disconnects the auxiliary winding of the motor at about what percent of synchronous speed?

Last Answer : Centrifugal switch disconnects the auxiliary winding of the motor at about 70 to 80 percent of synchronous speed.

Speed torque characteristic of a repulsion induction motor is similar to that of a D.C.?

Last Answer : Speed torque characteristic of a repulsion induction motor is similar to that of a D.C. compound motor.

If the centrifugal switch does not open at 70 to 80 percent of synchronous speed of motor, it would result in?

Last Answer : If the centrifugal switch does not open at 70 to 80 percent of synchronous speed of motor, it would result in damage to the starting winding.

In Ward-Leonard control the lower limit of speed is imposed by?

Last Answer : In Ward-Leonard control the lower limit of speed is imposed by residual magnetism of the generator.

For constant torque drive which speed control method is preferred ?

Last Answer : For constant torque drive armature voltage control speed control method is preferred.

MCQ on Motor Control Center

Description : MCQ on Motor Control Center

Last Answer : 1. MCC stands for ______ a. Motor Control Center b. Motor Control Cost c. Machine Components Center d. None of the above Answer : a. Motor Control Center 2. MCC contains _____ a. Fuse b. MCB c. ... a) Start the motor b) Accelerate the motor c) Decelerate the motor d) Stop the motor Answer : a

Why does the speed of a DC shunt motor decrease as the load increases?

Description : Why does the speed of a DC shunt motor decrease as the load increases?

Last Answer : Because if the load is increasing then the torque must also be increase. If not then the speed of motor will decrease.

The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a

Description : The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a firing delay angle, α and flux, Φ (A) directly proportional to α and Φ (B) ... proportional to α and inversely proportional to Φ (D) directly proportional to Φ and inversely proportional to α

Last Answer : The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a firing delay angle, α and flux, Φ directly proportional to α and inversely proportional to Φ

If the speed of a D.C. shunt motor is increased, the back e.m.f. of the motor will?

Last Answer : If the speed of a D.C. shunt motor is increased, the back e.m.f. of the motor will increase.

The operating speed of a synchronous motor can be changed to new fixed value by?

Last Answer : The operating speed of a synchronous motor can be changed to new fixed value by changing frequency.

If we change the excitation of synchronous machine will it affect on motor speed?

Description : If we change the excitation of synchronous machine will it affect on motor speed?

Last Answer : No, If we change the excitation of synchronous machine it will not affect on motor speed.

An electric motor in which both stator field and rotor rotates with same speed is called?

Description : An electric motor in which both stator field and rotor rotates with same speed is called?

Last Answer : An electric motor in which both stator field and rotor rotates with same speed is called synchronous motor.

Synchronous motor always runs at which speed?

Description : Synchronous motor always runs at which speed?

Last Answer : Synchronous motor always runs at synchronous speed.

The synchronous speed of an 8 pole induction motor supplied power from a 50 Hz source will be ?

Description : The synchronous speed of an 8 pole induction motor supplied power from a 50 Hz source will be ?

Last Answer : Ns         equals        f/pair pole 50/4      - 12.5

What human gestures are universal?

Description : What human gestures are universal?

Last Answer : The bird. That speaks in every language. Thumbs up also seems pretty universal.

What is a Universal Blood Donor and a Universal Blood Recipient?

Description : What is a Universal Blood Donor and a Universal Blood Recipient?

Last Answer : A universal blood donor is a person who is eligible to donate blood to any person in the world, except for a few set of people. The universal blood donor must have O- (O negative) blood group in ... type, even O-. So, the donor as well as recipient must be careful while involving in this process.

A universal RLC bridge uses?

Description : A universal RLC bridge uses?

Last Answer : A universal RLC bridge uses Maxwell Wein bridge for measurement of inductance and modified De Santy's bridge for measurement of capacitance.

A 3-phase, 4-pole, 50Hz induction motor runs at a speed of 1440 rpm. The rotating field produced by the rotor

Description : A 3-phase, 4-pole, 50Hz induction motor runs at a speed of 1440 rpm. The rotating field produced by the rotor rotates at a speed of ________ rpm with respect to stator field. (A) 1500 (B) 0 (C) 1440 (D) 60

Last Answer : 0