# The type of D.C. motor used for shears and punches is?

220 views
The type of D.C. motor used for shears and punches is?

The type of D.C. motor used for shears and punches is cumulative compound D.C. motor.

## Related questions

77 views

Description : Which type of starter is used to start the DC motor?

146 views

Description : Describe the reason of using dc series motor for electric trains.

Last Answer : Electric trains require an inverse torque speed characteristics for proper operation. That is a higher torque is required at start (when speed is nil or low) and as the train picks up ... torque - speed characteristics of DC series motors match, these motors are suitable for electric trains

498 views

Description : A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be

Last Answer : A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be 474 V

358 views

Description : A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is

Last Answer : A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is 36 Ohm

123 views

Description : In a 2 kW, 200 V, 1000 rpm. DC series motor the torque at full load was found to be 0.3 N -m. The torque at half full load in N -m is :

Last Answer : In a 2 kW, 200 V, 1000 rpm. DC series motor the torque at full load was found to be 0.3 N -m. The torque at half full load in N -m is : 0.075

2.5k views

Description : The function of a brush and commutator arrangement in a dc motor is to  (1) produce unidirectional torque (2) produce unidirectional current in the armature (3) help in changing the direction of rotation of the armature (4) reduce sparking

Last Answer : The function of a brush and commutator arrangement in a dc motor is to produce unidirectional torque

102 views

Last Answer : If a D.C. motor designed for 40°C ambient temperature is to be used for 50°C ambient temperature, then the motor is to be derated by a factor recommended by manufacturer and select the next higher H.P. motor.

170 views

Last Answer : For a D.C. shunt motor if the excitation is changed torque will change but power will remain constant.

424 views

Description : The speed of a D.C. motor can be controlled by varying  1. Its flux per pole 2. Resistance of armature circuit 3. Applied voltage 4. All of the above

Last Answer : The speed of a D.C. motor can be controlled by varying  1. Its flux per pole 2. Resistance of armature circuit 3. Applied voltage 4. All of the above

134 views

Last Answer : At the instant of starting when a D.C. motor is put on supply, it behaves like a low resistance circuit.

233 views

Last Answer : In case the back e.m.f. and the speed of a D.C. motor are doubled, the torque developed by the motor will remain unchanged.

137 views

Last Answer : The speed of a D.C. shunt motor can be increased by increasing the resistance in field circuit.

192 views

Description : As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent a heavy current from flowing though the armature circuit?

Last Answer : As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent a heavy current from flowing though the armature circuit a resistance is connected in series with armature.

96 views

Last Answer : The armature voltage control of D.C. motor provides constant torque drive.

220 views

Last Answer : The armature torque of the D.C. shunt motor is proportional to armature current.

144 views

Last Answer : As the load is increased the speed of D.C. shunt motor will reduce slightly.

97 views

Last Answer : In a differentially compounded D.C. motor, if shunt field suddenly opens the motor will first stop and then run in opposite direction as series motor.

357 views

Last Answer : Flywheel is used with D.C. compound motor to reduce the peak demand by the motor, compound motor will have to be cumulatively compounded.

164 views

Last Answer : Sparking, is discouraged in a D.C. motor because commutator gets damaged.

126 views

Last Answer : D.C. Series motor is generally preferred for cranes and hoists.

114 views

Last Answer : (b) Clostridium butylicum Lipase Removal of oil stains

241 views

Last Answer : Sparking at the commutator of a D.C. motor may result in damage to commutator segments, damage to commutator insulation, increased power consumption.

126 views

Last Answer : If a D.C. shunt motor is working at no load and if shunt field circuit suddenly opens this will result in excessive speed, possibly destroying armature due to excessive centrifugal stresses.

185 views

Last Answer : Cumulatively compounded D.C. motor will be suitable along with flywheel for intermittent light and heavy loads.

81 views

589 views

Last Answer : The current drawn by the armature of D.C. motor is directly proportional to the torque required.

522 views

Last Answer : In a D.C. series motor, if the armature current is reduced by 50%, the torque of the motor will be equal to 25% of the previous value.

119 views

Last Answer : The speed of a D.C. series motor is inversely proportional to the armature current.

169 views

Last Answer : The starting resistance of a D.C. motor is generally low.

181 views

Last Answer : In case the conditions for maximum power for a D.C. motor are established, the efficiency of the motor will be less than 50%.

255 views

Last Answer : By looking at Commutator part of the motor, it can be easily confirmed that a particular motor is D.C. motor.

383 views

Last Answer : In a D.C. shunt motor, under the conditions of maximum power, the current in the armature will be more than full-load current.

429 views

Last Answer : The armature may burn if the back e.m.f. of a D.C. motor vanishes suddenly.

91 views

Last Answer : In a D.C. shunt motor, speed is independent of armature current.

155 views

Last Answer : The speed of a D.C. shunt motor more than its full-load speed can be obtained by decreasing the field current.

111 views

Last Answer : If a D.C. motor is connected across the A.C. supply it will burn due to heat produced in the field winding by eddy currents.

128 views

Last Answer : For starting a D.C. motor a starter is required because it limits the starting current to a safe value.

86 views

Last Answer : A D.C. series motor is that which has its field winding consisting of thick wire and less turns.

140 views

Last Answer : If the field of a D.C. shunt motor gets opened while motor is running the motor will attain dangerously high speed.

114 views

Last Answer : Cumulative compound D.C. motor is preferred for elevators.

191 views

Last Answer : The direction of rotation of a D.C. series motor can be changed by interchanging field terminals.

138 views

Last Answer : A.C. series motor as compared to D.C. series motor has smaller brush width, less number of field turns, more number of armature turns, less air gap.

95 views

Last Answer : If a D.C. series motor is operated on A.C. supply, it will spark excessively, have poor efficiency, have poor power factor.

69 views

Description : What is the RPM of a DC motor?

272 views

Description : What are the speed control methods of dc motor?

Last Answer : Field control of DC motor Armature control of DC motor

102 views

Last Answer : Induction motor is a AC motor it is also known as asynchronous motor .

164 views

Description : Armature control of DC motor

Last Answer : Armature control of DC motor

131 views

Description : Field control of DC motor

Last Answer : Field control of DC motor