A 10 farad capacitor is used in a circuit. The voltage difference between the plates of the capacitor is 20 volts. What is the magnitude of the charge on each of the capacitor's plates?

1 Answer

Answer :

ANSWER: 200 COULOMBS

Related questions

Description : Three capacitors with different capacitances are connected in series. Which of the following statements is TRUE? w) All three of the capacitors have the same potential difference between their plates. x ... y) The capacitance of the system depends on the voltage applied across the three capacitors.

Last Answer : ANSWER: X -- THE MAGNITUDE OF THE CHARGE IS THE SAME ON ALL OF THE CAPACITOR PLATES

Description : Five volts are applied across the plates of a parallel plate capacitor. The distance of separation of the plates is .02 meters. What is the magnitude of the electric field inside the capacitor?

Last Answer : ANSWER: 250 VOLTS PER METER or 250 NEWTONS PER COULOMB

Description : What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF, connected in series? A) 500 μC B) 0.5 μC C) 0.5 C D) None of these

Last Answer : What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF, connected in series? A) 500 μC B) 0.5 μC C) 0.5 C D) None of these

Description : what will be the capacitance if three capacitors connected in parallel each having value of 0.5 micro Farad ?

Last Answer : the total capacitace when connected in parallel Tc=total capacitor c1=c2=c3=0.5uf Tc=c1+c2+c3 Tc=1.5uf

Description : If the capacitors are connected in parallel, then the potential difference across each capacitor is A. same B. different C. zero D. infinite

Last Answer : same

Description : A two farad and a four farad capacitor are connected in parallel. What single capacitance is "equivalent" to this combination? 

Last Answer : ANSWER: 6 FARADS

Description : If a three farad capacitor and a six farad capacitor are connected in parallel, what is their equivalent capacitance?

Last Answer : ANSWER: 9 FARADS

Description : A two farad and a four farad capacitor are connected in series. What single capacitance is "equivalent" to this combination?

Last Answer : ANSWER: 4/3 FARADS

Description : a. Define the term "working voltage" of a capacitor. b. What should be the working voltage of a capacitor in a circuit that is operating at 600 volts?

Last Answer : a. It is the maximum voltage the capacitor can work without risk of damage. b. 900 volts.

Description : If charge stored on plates of capacitor is large, then capacitance will be A. small B. large C. zero D. infinite

Last Answer : large

Description : If the plates of capacitor are oppositely charged then the total charge is equal to A. negative B. positive C. zero D. infinite

Last Answer : zero

Description : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor  A) Is always zero B) Can never be greater than the input voltage C) Can be greater than the input ... input voltage D) Can be greater than the input voltage, and is in phase with the input voltage

Last Answer : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor Can be greater than the input voltage, however, it is 90° out of phase with the input voltage 

Description : When replacing component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its ... provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Last Answer : Answer: D

Description : When changing out component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its ... provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Last Answer : Answer: D

Description : A circuit which employs a DIRECT CURRENT source has a branch which contains a capacitor. After the circuit has reached a steady state, what is the magnitude of the current in the circuit branch which contains the capacitor?

Last Answer : ANSWER: THE CURRENT IS ZERO

Description : Electric field strength on a dust particle having charge equal to 8 × 10- 19 when plates are separated by distance of 2 cm and have a potential difference of 5 kV is A. 2.0 × 10-13 N B. 3 N C. 5 N D. 20 N

Last Answer : 2.0 × 10-13 N

Description : When working on electrical circuits containing large capacitors, in addition to deenergizing the circuit, which of the listed precautions should also be taken? A. Keep all radio equipment ... capacitor insulation resistance. C. Ground the capacitor terminals. D. Check capacitor circuit polarity.

Last Answer : Answer: C

Description : Why 0.04 micro farad capacitor is used in a thermistor based fire alarm?

Last Answer : Need answer

Description : Capacitors and inductors are commonly used in circuits. Capacitors store electrical energy in the electric field between their plates. How do inductors store energy?

Last Answer : ANSWER: IN A MAGNETIC FIELD SURROUNDING THE INDUCTOR 

Description : A common-emitter circuit has an input voltage of 0.1 volt, an output voltage of 2.0 volts, an input current of 0.5 milliamps, and an output current of 10 milliamps. What is the power gain? A. 20 B. 40 C. 400 D. 4000

Last Answer : Answer: C

Description : What would be the voltage drop across the series resistor of the circuit shown in the illustration if the source is 30 volts, the resistance of R1 is 10 ohms, R2 is 10 ohms and R3 is 10 ohms? EL-0032 A. 5 volts B. 10 volts C. 20 volts D. 30 volts

Last Answer : Answer: C

Description : What would be the voltage drop across the parallel branches of the circuit shown in the illustration if the source is 30 volts the resistance for R1 is 10 ohms, R2 is 10 ohms and R3 is 10 ohms? EL-0032 A. 5 volts B. 10 volts C. 20 volts D. 30 volts

Last Answer : Answer: B

Description : A capacitor (condenser) is used in an electrical circuit to (a) step down voltage (b) step up voltage (c) store electric charge (d) produce electric charge

Last Answer : Ans:(c)

Description : A circuit is to be designed in which a capacitor must charge to 40 percent of the maximum charging voltage in 200 microseconds. The resistor to be used has a resistance of 40,000 ohms. What size capacitor must be used?

Last Answer : 0.1 microfarads 40% from the graph = 0.5

Description : What is the voltage drop across the resistor in an RC charging circuit when the charge on the capacitor is equal to the battery voltage?

Last Answer : Zero.

Description : A constant potential difference is applied across the plates of a parallel-plate capacitor. Neglecting any edge effects, the electric field inside the capacitor is: w) constant x) varying as one over r squared y) decreasing as one moves from the positive to the negative plate z) zero

Last Answer : ANSWER: W -- CONSTANT

Description : If 10 joules of energy are required to move 5 coulombs of charge between two points, the potential difference between the two points is equal to how many volts?

Last Answer : ANSWER: 2 VOLTS

Description : The value of the capacitance depends upon the________________? A.voltage applied B. thickness of the capacitor plates C. geometry of the capacitor D. dinsity of the capacitor plates

Last Answer : Ans: C

Description : An LED is operated on a 12 volt automobile circuit. The voltage drop across the LED is 2 volts and the current must be limited to 50 milliamps to prevent its overheating and destruction. What size resistor must be used? w) 60 ohms x) 100 ohms y) 120 ohms z) 200 ohms

Last Answer : ANSWER: Z -- 200 OHMS

Description : insulator which is placed between 2 plates of capacitor isA. electric B. dielectric C. inductor D. resistor

Last Answer : dielectric

Description : What power would be consumed in EACH of the branch resistors of the circuit shown in the illustration if the source is 30 volts, the resistance for R1 is 10 ohms, R2 is 10 ohms and R3 is 10 ohms? EL-0032 A. 5 watts B. 10 watts C. 20 watts D. 40 watts

Last Answer : Answer: B

Description : In the illustration circuit, A, B, C, and D are each 12 volts. What is the voltage of the lead connected to C and D with respect to the lead connected to A and B? EL-0039 A. (+) 48 volts B. (-) 24 volts C. (-) 48 volts D. (+) 24 volts

Last Answer : Answer: D

Description : In the illustration circuit, A, B, C, and D are each 12 volts. What is the voltage at the output lead connected to 'A' and 'B' with respect to the output lead connected to 'C' and 'D'? EL-0039 A. (+) 48 volts B. (-) 24 volts C. (-) 48 volts D. (+) 24 volts

Last Answer : Answer: B

Description : Capacitors can be used in electric distribution systems to improve power factor. This is accomplished by seesawing energy between the capacitor and the _____________. A. generator B. inductive loads C. resistive loads D. all of the above

Last Answer : Answer: B

Description : Is there any relation between the capacitances of two capacitors used in two value capacitor start capacitor run motor?

Last Answer : Ans: Starting capacitor has about 10 – 15 times high capacity than the value of running capacitor.

Last Answer : The capacitors used in single-phase capacitor motors have no polarity marking.

Last Answer : If the centrifugal switch of a two-value capacitor motor using two capacitors fails to open then Electrolytic capacitor will, in all probability, suffer break down.

Description : A capacitor of capacitance 50 micro farads is charged to a potential difference of 200 Volts. Find out energy stored in the condenser?

Last Answer : A capacitor of capacitance 50 micro farads is charged to a potential difference of 200 Volts. Find out energy stored in the condenser? 1 joule

Description : The potential difference across a 4 ohm resistor is 20 volts. Assuming that all of the energy dissipated by this resistor is in the form of heat, how many joules of heat are radiated in 10 seconds?  

Last Answer : ANSWER: 1000 JOULES

Description : If the voltage supplied to the lighting circuit is 110 volts, how much current is used by a 100 watt light bulb? A. 0.08 amps B. 0.91 amps C. 1.10 amps D. 90.9 amps

Last Answer : Answer: B

Description : In the illustration, 12 volts is applied to the circuit where the resistance of R1 is 10 ohms and R2 is 10 ohms. what is the voltage across R2? EL-0036 A. 1.2 volts B. 2 volts C. 6 volts D. 12 volts

Last Answer : Answer: C

Description : What is the voltage across 'R3' of the illustrated circuit if the supply is 24 volts and the resistance of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms? EL-0020 A. 2 volts B. 6 volts C. 8 volts D. 10 volts

Last Answer : Answer: D

Description : What is the voltage across 'R2' of the illustrated circuit if the supply is 24 volts and the resistance of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms? EL-0020 A. 2 volts B. 6 volts C. 8 volts D. 10 volts

Last Answer : Answer: C

Description : What is the voltage across 'R1' of the illustrated circuit if the supply is 24 volts and resistance of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms? EL-0020 A. 2 volts B. 6 volts C. 8 volts D. 10 volts

Last Answer : Answer: B

Description : A 10 volt battery connected to a capacitor delivers a charge of 0.5 coulombs. The capacitance of the capacitor is: w) 2 x 10-2 farads x) 5 x 10-2 farads y) 2 farads z) 5 farads

Last Answer : ANSWER: X -- 5 x 10-2 FARADS

Description : 'Farad' is the unit of : (1) Capacitance (2) Inductance (3) Resistance (4) Conductance

Last Answer : (1) Capacitance Explanation: The Farad is the SI derived unit of capacitance. It is named after the English physicist Michael Faraday.

Description : What is the SI unit of frequency? (1) Newton (2) Watt (3) Farad (4) Hertz

Last Answer : (4) Hertz Explanation: The number of waves or vibrations passing through a point in one second is called Frequency. The SI (System International) Unit of Frequency is Hertz(Hz).

Description : What is unit of Electrical Capacity? (1) henry (2) farad (3) volt (4) ohm

Last Answer : (2) farad Explanation: Henry is unit of Magnetic Induction, volt is unit of Potential Difference, ohm is unit of Electric Resistance.

Description : ‘Farad’ is the unit of : (1) Capacitance (2) Inductance (3) Resistance (4) Conductance

Last Answer : Capacitance

Description : Voltage can be stepped up from 6 to approximately a) 10,000 volts b) 15.00 0 volts c) 20,000 volts d) 25,000 volts

Last Answer : c) 20,000 volts