In D.C. machines the residual magnetism is of the order of?

by

1 Answer

Answer :

In D.C. machines the residual magnetism is of the order of 2 to 3 percent.

by

Related questions

If residual magnetism is present in a D.C. generator, the induced e.m.f. at zero speed will be?

Description : If residual magnetism is present in a D.C. generator, the induced e.m.f. at zero speed will be?

Last Answer : If residual magnetism is present in a D.C. generator, the induced e.m.f. at zero speed will be zero.

In dc machines, the armature windings are placed on the rotor because of the necessity for

Description : In dc machines, the armature windings are placed on the rotor because of the necessity for  (1) electromechanical energy conversion (2) generation of voltage (3) commutation (4) development of torque

Last Answer : 3  Commutation

In D.C. machines fractional pitch winding is used?

Last Answer : In D.C. machines fractional pitch winding is used to reduce the sparking.

Satisfactory commutation of D.C. machines requires?

Last Answer : Satisfactory commutation of D.C. machines requires brushes should be of proper grade and size, brushes should smoothly run in the holders, smooth, concentric commutator properly undercut.

Brushes of D.C. machines are made of?

Last Answer : Brushes of D.C. machines are made of carbon.

Hopkinson's test on D.C. machines is conducted at?

Last Answer : Hopkinson's test on D.C. machines is conducted at full-load.

The purpose of retardation test on D.C. shunt machines is to find out?

Last Answer : The purpose of retardation test on D.C. shunt machines is to find out stray losses.

State any two applications of single phase autotransformer.

Description : State any two applications of single phase autotransformer.

Last Answer : Applications of single phase auto transformers: 1) Give small boost to distribution cable to correct the voltage drop. 2) As auto transformer starter for induction motors. 3) As furnace supply ... . 5) In control equipment for single phase locomotives. 6) As dimmer in lighting circuits.

State any two conditions for parallel operation of 3-phase transformer.

Description : State any two conditions for parallel operation of 3-phase transformer.

Last Answer : Conditions for Parallel operation of 3 phase transformer 1) Voltage ratings of both the transformers must be identical. 2) Percentage or p.u. impedance should be equal in magnitude. 3) X/R ratio ... between primary & secondary voltages must be same. 6) Phase sequence on both sides must be same.

Compare core type transformer and shell type transformer on the following parameters. (i) Types of winding used, (ii) Application

Description : Compare core type transformer and shell type transformer on the following parameters. (i) Types of winding used, (ii) Application

Last Answer : Ans:

Define transformation ratio in terms of current and voltage.

Description : Define transformation ratio in terms of current and voltage.

Last Answer : (i) Transformation Ratio (K) is defined as the ratio of the primary current to the secondary current.  (ii) Transformation Ratio (K) is defined as the ratio of the secondary voltage to the primary voltage.

Define: (i) Commercial efficiency of a transformer and (ii) All day efficiency of a transformer.

Description : Define: (i) Commercial efficiency of a transformer and  (ii) All day efficiency of a transformer.

Last Answer : (i) Commercial Efficiency : It is the ratio of output power in watt to the input power in watt. (ii) All day efficiency of a transformer: It is the ratio of output energy in kWh to the input energy in kWh in the 24 hours of the day

A 50 KVA transformer has iron loss 2 kW on full load. Calculate its iron loss at 75% of full load.

Description : A 50 KVA transformer has iron loss 2 kW on full load. Calculate its iron loss at 75% of full load.

Last Answer : Iron loss is dependent on voltage and independent of load. Hence iron loss at 75% of Load = Iron loss at full load = 2 kW

State any four properties of Ideal transformer.

Description : State any four properties of Ideal transformer.

Last Answer : Properties of Ideal transformer: 1) No losses (iron and copper losses), hence no temperature rise. 2) No magnetic leakage i.e (Coefficient of coupling between primary and secondary windings is unity) 3) Zero winding ... drop i.e. E1 = V1, E2 = V2 5) Efficiency 100 %. 6) Regulation 0 %.

Draw the connection diagram of long shunt differential D.C. compound generator.

Description : Draw the connection diagram of long shunt differential D.C. compound generator.

Last Answer : Ans:

The inertia constants of two groups of machines which do not swing together are M1 and M2. The equivalent

Description : The inertia constants of two groups of machines which do not swing together are M1 and M2. The equivalent inertia constant of the system is

Last Answer : The inertia constants of two groups of machines which do not swing together are M1 and M2. The equivalent inertia constant of the system is M1M2/M1+M2

The speed control of universal motor used for sewing machines is by?

Last Answer : The speed control of universal motor used for sewing machines is by varying the resistance.

What is magnetism?

Description : What is magnetism?

Last Answer : Magnetism is a force which appears between magnets and magnetic materials like steel and iron. For example, a magnet will attract steel pins and iron nails brought near it.

How Magnetism Works

Description : How Magnetism Works

Last Answer : How Magnetism Works Magnetism is a physical force. It causes certain objects to attract or repel another object. This mainly occurs in objects of metallic composition. Magnetism is caused by the motion and ... a south pole. A magnet would always have two poles even if it breaks into several pieces.

Explain the concept of anti-Ferro magnetism and state its significance.

Description : Explain the concept of anti-Ferro magnetism and state its significance.

Last Answer : When the neighboring magnetic moments are aligned anti-parallel. This phenomenon is called anti ferromagnetism. This phenomenon occurs below a certain temperature known as Neel temp (TN) Eg.: Cobalt oxide, Nickel oxide, Chromium.

The process of removing the unwanted magnetism is called ______

Description : The process of removing the unwanted magnetism is called ______ A) Unmagnetization B) Degaussing C) Diamagnetization D) Depoling

Last Answer : The process of removing the unwanted magnetism is called Degaussing

How to get a Restraining Order

Description : How to get a Restraining Order

Last Answer : How to get a Restraining Order A restraining order is an order issued by a court of law with the main purpose of protecting persons from particular individuals whom they believe may put them at ... disobeys the order make sure you contact the police. They can be arrested for violating the order.

A transfer function has a second order denominator and constant gain in the numerator

Description : A transfer function has a second order denominator and constant gain in the numerator

Last Answer : A transfer function has a second order denominator and constant gain in the numerator the system has two zeros at infinity

In order to regulate steady state error to zero, in a negative feedback control system, one employs

Description : In order to regulate steady state error to zero, in a negative feedback control system, one employs

Last Answer : In order to regulate steady state error to zero, in a negative feedback control system, one employs Integral control

A second order system shows 100% overshoot in its unit step response. It can be categorized as

Description : A second order system shows 100% overshoot in its unit step response. It can be categorized as (A) underdamped system. (B) overdamped system. (C) Critically damped system. (D) undamped system.

Last Answer : A second order system shows 100% overshoot in its unit step response. It can be categorized as undamped system.

Cells are connected in series in order to?

Description : Cells are connected in series in order to?

Last Answer : Cells are connected in series in order to increase voltage available.

What are the advantages of the use of frequency converter instead of star-delta or soft starter?

Description : Can you guys explain the advantages of frequency converter against the star delta or soft starter?

Last Answer : ¬Soft starters  A soft starter is, as you would expect, a device which ensures a soft starting of a motor. A softstarter has different characteristics to the other starting ... at rated current from zero to full speed. Frequency converters are becoming cheaper all the time.

Are we losing control over our life to machines?

Description : Are we losing control over our life to machines?

Last Answer : That is up to you. You can or you can decide to not.

Heat Transfer Machines

Description : Heat Transfer Machines

Last Answer : Heat transfer machines are just the thing you need in order to do heat transfers on your clothing or whatever surface you want to decorate. In order for you to stick designs and precious stones on porous and ... is best. This will also give you an idea of what kind of designs you can choose from.

What type of motor is used for drilling machines?

Description : What type of motor is used for drilling machines?

Last Answer : universal motor also used in Handheld power tools, blowers, blenders, vacuum cleaners, polishers and kitchen appliances.universal motor is defined as a motor which may be operated either on direct or single phase AC supply at approximately the same speed and output

For protection of rotating machines against lightning surges _______ is used.

Description : For protection of rotating machines against lightning surges _______ is used.  (1) lightning arrester (2) capacitor (3) combination of lightning arrester and capacitor (4) lightning conductor and arrester

Last Answer : For protection of rotating machines against lightning surges combination of lightning arrester and capacitor is used. 

Laminated cores, in electrical machines, are used to reduce?

Description : Laminated cores, in electrical machines, are used to reduce?

Last Answer : Laminated cores, in electrical machines, are used to reduce eddy current loss.

Silicon steel is used in electrical machines because it has?

Description : Silicon steel is used in electrical machines because it has?

Last Answer : Silicon steel is used in electrical machines because it has low hysteresis loss.

For a D.C. machines laboratory following type of D.C. supply will be suitable?

Last Answer : For a D.C. machines laboratory following type of D.C. supply will be suitable induction motor D.C. generator set.

Exciters of synchronous machines are?

Last Answer : Exciters of synchronous machines are d.c. shunt machines.

Losses which occur in rotating electric machines and do not occur in transformers are?

Description : Losses which occur in rotating electric machines and do not occur in transformers are?

Last Answer : Friction losses windage losses 

What is a switch? How does it work?

Description : What is a switch? How does it work?

Last Answer : Switch is a bridge in which electric current flow along the wire. An electric current can be turned on and off by a switch. When you turn the switch on, a small metal piece inside the switch ... turn the switch off, the metal piece moves away from the wire, and the electric current stops flowing.

What is a magnetic field?

Description : What is a magnetic field?

Last Answer : The area around a magnet in which its magnetic force acts is called a magnetic field.

What is the difference between a temporary and a permanent magnet?

Description : What is the difference between a temporary and a permanent magnet?

Last Answer : A piece of steel or iron which keeps magnetic properties is called a permanent magnet. When piece of iron becomes magnetized when it is touched by magnet, which means magnetism has been induced in it. ... away from the magnet, it loses its magnetism. This type of magnet is called a temporary magnet.

What are conductors?

Description : What are conductors? 

Last Answer : Materials that allow an electric charge to pass along them are called conductors. Metals are good conductors of electricity.

What is an electric circuit?

Description : What is an electric circuit?

Last Answer : The pathway along which charged particles move is called an electric circuit. 

What is lightning?

Description : What is lightning?

Last Answer : When positive and negative charges in the clouds jump towards each other through the air. The electric Current makes a spark which is seen as a flash of lightning.

How can a body be tested for the presence of a charge?

Description : How can a body be tested for the presence of a charge?

Last Answer : A body can be tested for a charge in the laboratory with the help of an instrument called a gold leaf Electroscope.

What is electrostatic induction?

Description : What is electrostatic induction?

Last Answer : The process in which positive charge object produce the negative charge when it’s brought close to a neutral object. This process is called electrostatic induction.

What are ions? How are ions formed?

Description : What are ions? How are ions formed?

Last Answer : Ions are the individual atom or group of atoms. Ions formed when individual atom, or group of atoms having a net electric charge (either positive or negative) due to loss or gain of one or more electrons.

What is an atom made up of?

Description : What is an atom made up of? 

Last Answer : Atoms are made up of protons, neutrons and electrons. 

Identify the increasing order of voltage regulation of the following dc generators a same load :

Description : Identify the increasing order of voltage regulation of the following dc generators a same load :  (A) differential compound, shunt and under compound  (B) shunt, differential compound and ... C) under compound, shunt and differential compound  (D) shunt, under compound and differential compound

Last Answer : Identify the increasing order of voltage regulation of the following dc generators a same load : under compound, shunt and differential compound 

As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent...

Description : As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent a heavy current from flowing though the armature circuit?

Last Answer : As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent a heavy current from flowing though the armature circuit a resistance is connected in series with armature.

Can anyone in the office machine business explain how click charges work?

Description : Can anyone in the office machine business explain how click charges work?

Last Answer : can you give more specifics? Typically the contract would include a certain amt. of impressions (clicks) then any after that would be at a lesser rate.

List any four advantages and two disadvantages of 3 phase induction motor.

Description : List any four advantages and two disadvantages of 3 phase induction motor.

Last Answer : Advantages of 3 phase induction motor: 1) Simple in construction. 2) Economical in cost. 3) Requires very less maintenance. 4) High efficiency. 5) Low maintenace cost. 6) Self starting. 7 ... operated below its full load capacity. 6) It takes a large current from line at instant of starting.