# Which D.C. motor is generally preferred for cranes and hoists ?

120 views

## 1 Answer

### Answer :

D.C. Series motor is generally preferred for cranes and hoists.

## Related Questions

Last Answer : Cumulative compound D.C. motor is preferred for elevators.

Show More

113 views 1 answer

Last Answer : The starting resistance of a D.C. motor is generally low.

Show More

169 views 1 answer

Describe the reason of using dc series motor for electric trains.
Last Answer : Electric trains require an inverse torque speed characteristics for proper operation. That is a higher torque is required at start (when speed is nil or low) and as the train picks up ... torque - speed characteristics of DC series motors match, these motors are suitable for electric trains

Show More

142 views 1 answer

A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be
Last Answer : A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be 474 V

Show More

481 views 1 answer

A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is
Last Answer : A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is 36 Ohm

Show More

331 views 1 answer

In a 2 kW, 200 V, 1000 rpm. DC series motor the torque at full load was found to be 0.3 N -m. The torque at half full load in N -m is :
Last Answer : In a 2 kW, 200 V, 1000 rpm. DC series motor the torque at full load was found to be 0.3 N -m. The torque at half full load in N -m is : 0.075

Show More

109 views 1 answer

The function of a brush and commutator arrangement in a dc motor is to  (1) produce unidirectional torque (2) produce unidirectional current in the armature (3) help in changing the direction of rotation of the armature (4) reduce sparking
Last Answer : The function of a brush and commutator arrangement in a dc motor is to produce unidirectional torque

Show More

2.5k views 1 answer

Last Answer : If a D.C. motor designed for 40°C ambient temperature is to be used for 50°C ambient temperature, then the motor is to be derated by a factor recommended by manufacturer and select the next higher H.P. motor.

Show More

97 views 1 answer

Last Answer : For a D.C. shunt motor if the excitation is changed torque will change but power will remain constant.

Show More

168 views 1 answer

The speed of a D.C. motor can be controlled by varying  1. Its flux per pole 2. Resistance of armature circuit 3. Applied voltage 4. All of the above
Last Answer : The speed of a D.C. motor can be controlled by varying  1. Its flux per pole 2. Resistance of armature circuit 3. Applied voltage 4. All of the above

Show More

389 views 1 answer

Last Answer : At the instant of starting when a D.C. motor is put on supply, it behaves like a low resistance circuit.

Show More

130 views 1 answer

Last Answer : In case the back e.m.f. and the speed of a D.C. motor are doubled, the torque developed by the motor will remain unchanged.

Show More

228 views 1 answer

Last Answer : The speed of a D.C. shunt motor can be increased by increasing the resistance in field circuit.

Show More

134 views 1 answer

As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent a heavy current from flowing though the armature circuit?
Last Answer : As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent a heavy current from flowing though the armature circuit a resistance is connected in series with armature.

Show More

187 views 1 answer

Last Answer : The armature voltage control of D.C. motor provides constant torque drive.

Show More

92 views 1 answer

Last Answer : The armature torque of the D.C. shunt motor is proportional to armature current.

Show More

210 views 1 answer

Last Answer : As the load is increased the speed of D.C. shunt motor will reduce slightly.

Show More

142 views 1 answer

Last Answer : In a differentially compounded D.C. motor, if shunt field suddenly opens the motor will first stop and then run in opposite direction as series motor.

Show More

94 views 1 answer

Last Answer : Flywheel is used with D.C. compound motor to reduce the peak demand by the motor, compound motor will have to be cumulatively compounded.

Show More

353 views 1 answer

Last Answer : Sparking, is discouraged in a D.C. motor because commutator gets damaged.

Show More

159 views 1 answer

Last Answer : (b) Clostridium butylicum Lipase Removal of oil stains

Show More

107 views 1 answer

Last Answer : Sparking at the commutator of a D.C. motor may result in damage to commutator segments, damage to commutator insulation, increased power consumption.

Show More

228 views 1 answer

Last Answer : If a D.C. shunt motor is working at no load and if shunt field circuit suddenly opens this will result in excessive speed, possibly destroying armature due to excessive centrifugal stresses.

Show More

122 views 1 answer

Last Answer : Cumulatively compounded D.C. motor will be suitable along with flywheel for intermittent light and heavy loads.

Show More

175 views 1 answer

Last Answer : Differentially compounded D.C. motor has got maximum self loading property.

Show More

77 views 1 answer

Last Answer : The current drawn by the armature of D.C. motor is directly proportional to the torque required.

Show More

582 views 1 answer

Last Answer : In a D.C. series motor, if the armature current is reduced by 50%, the torque of the motor will be equal to 25% of the previous value.

Show More

503 views 1 answer

Last Answer : The speed of a D.C. series motor is inversely proportional to the armature current.

Show More

114 views 1 answer

Last Answer : In case the conditions for maximum power for a D.C. motor are established, the efficiency of the motor will be less than 50%.

Show More

178 views 1 answer

Last Answer : By looking at Commutator part of the motor, it can be easily confirmed that a particular motor is D.C. motor.

Show More

244 views 1 answer

Last Answer : In a D.C. shunt motor, under the conditions of maximum power, the current in the armature will be more than full-load current.

Show More

367 views 1 answer

Last Answer : The armature may burn if the back e.m.f. of a D.C. motor vanishes suddenly.

Show More

423 views 1 answer

Last Answer : In a D.C. shunt motor, speed is independent of armature current.

Show More

87 views 1 answer

Last Answer : The speed of a D.C. shunt motor more than its full-load speed can be obtained by decreasing the field current.

Show More

147 views 1 answer

Last Answer : If a D.C. motor is connected across the A.C. supply it will burn due to heat produced in the field winding by eddy currents.

Show More

102 views 1 answer

The type of D.C. motor used for shears and punches is?
Last Answer : The type of D.C. motor used for shears and punches is cumulative compound D.C. motor.

Show More

214 views 1 answer

Last Answer : For starting a D.C. motor a starter is required because it limits the starting current to a safe value.

Show More

123 views 1 answer

Last Answer : A D.C. series motor is that which has its field winding consisting of thick wire and less turns.

Show More

82 views 1 answer

Last Answer : If the field of a D.C. shunt motor gets opened while motor is running the motor will attain dangerously high speed.

Show More

135 views 1 answer

Last Answer : The direction of rotation of a D.C. series motor can be changed by interchanging field terminals.

Show More

185 views 1 answer

Last Answer : A.C. series motor as compared to D.C. series motor has smaller brush width, less number of field turns, more number of armature turns, less air gap.

Show More

136 views 1 answer

Last Answer : If a D.C. series motor is operated on A.C. supply, it will spark excessively, have poor efficiency, have poor power factor.

Show More

91 views 1 answer

What is the RPM of a DC motor?

Show More

66 views 0 answers

What are the speed control methods of dc motor?
Last Answer : Field control of DC motor Armature control of DC motor

Show More

254 views 2 answers

Last Answer : Induction motor is a AC motor it is also known as asynchronous motor .

Show More

98 views 1 answer

Armature control of DC motor
Last Answer : Armature control of DC motor

Show More

162 views 2 answers

Field control of DC motor
Last Answer : Field control of DC motor

Show More

125 views 2 answers

Separately Excited DC motor
Last Answer : Separately Excited DC motor

Show More

356 views 2 answers

Four Quadrant Operation Of DC Motor

Show More

225 views 0 answers

Last Answer : Shunt motors,  Series motors, Compound motors

Show More

100 views 1 answer