State Kirchhoff’s voltage law. 

1 Answer

Answer :

The algebraic sum of all the emf’s in a loop is equal to zero. 

Related questions

Description : State the internal resistance of ideal current and ideal voltage source.

Last Answer : The internal resistance of ideal current and ideal voltage source: Ideal voltage source has zero internal resistance  Ideal current source has infinite internal resistance 

Description : State Faraday’s law of electromagnetic induction.

Last Answer : Faradays first law: The first law states that whenever the magnetic lines of force (flux lines) linking with a coil or conductor changes, an emf gets induced in the coil or conductor. Such an emf lasts ... to the rate of change of flux linkage where flux linkage = Flux X Number of turns of coil. 

Description : State Kirchoff’ s current law along with its formulae.

Last Answer : In any electrical network, the algebraic sum of the currents meeting at a point or junction is zero. (OR) Total current entering a junction or node is exactly equal to the total current leaving the node. ΣI = 0

Description : Draw ideal and practical voltage source and current source.

Last Answer : Voltage Source: Current Source:

Description : Kirchhoff’s voltage law is based on the law of conservation of which thing?

Last Answer : Energy

Description :  Kirchhoff's 2nd law deals with A. current in circuit B. voltage in circuit C. e.m.f in circuit D. both B and C

Last Answer : both B and C

Description : What does Kirchhoff's voltage law states?

Last Answer : Kirchhoff's voltage law states that " the algebraic sum of potential rises and drops around a closed loop is zero." Σ4V= 0 

Description : When using Kirchhoff’s voltage law, how are voltage polarities assigned to the voltage drops across resistors?

Last Answer : The point at which current enters the resistor is assigned a negative polarity and the point at which current leaves the resistor is

Description : Draw the star and delta connection. State any one conversion formula.

Last Answer : star and delta connection

Description : State four applications of PIN diode. 

Last Answer : i. Used in rectifier circuit. ii. Used in clipping and clamping circuit. iii. Used for A.M detection. iv. Used for voltage multiplier.

Description : State the condition for RC differentiator. Draw the output waveform of RC integrator for square wave input.

Last Answer : Condition for RC differentiator: If the time duration T of the input waveform is comparable with the RC time constant (product of R and C) then the output waveform of the differentiator gets distorted. Hence for proper differentiator the condition is as follows: T >>RC

Description : State two functions of slug- tuned inductor and write the expression of self-inductance.

Last Answer : It is kind of variable inductor. The value of inductance increases, when the slug is moved into the coil winding and decreases the resonant frequency. When the slug is moved out of the coil ... decreases and resonant frequency of the tuned circuit increases. Self-inductance (L)= N x φ /I

Description : State the working principle of LED and LASER diode.

Last Answer : LED  Working principle of LED diode:An LED emits two light when electrical energy is applied to it.LED is a two terminal device.The terminals are named as anode (A) and the other as cathode(K). A ... with light: 1) Light absorption 2) Spontaneous emission 3) Stimulated emission

Description : Write the specifications of linear and non- linear potentiometers. State its applications

Last Answer : Specifications of linear & nonlinear potentiometers:  1. Ohmic range: 10Ω to 125 kΩ 2. Power rating : 100watt to 200 watt 3. Tolerance :  2% 4. Voltage Rating: 5V-500V 5. Operating ... 7. Used as potential dividers. 8. It is used for panel control in receivers, function generator etc 

Description : State the parameter of rectifier. 

Last Answer : Any two parameter of rectifier-  Average load current Average load voltage RMS load current RMS load voltage Ripple factor Voltage regulation Rectification efficiency and TUF.

Description : State the classification of capacitors.

Last Answer : Classification of capacitor is as follows:

Description : State : (i) Norton’s theorem. (ii) super-position theorem.

Last Answer : Norton's theorem Statement: Any linear, active, resistive, network containing one or more voltage and / or current sources can be replaced by an equivalent circuit containing a current source ... response (current) caused by individual sources acting alone, while the other sources are inoperative.

Description : State operating principle of LED. Write material names used to manufacture LED.

Last Answer : Principle of Operation of LED:  When an LED is forward biased, the electron in the n-region will cross the junction and recombine with the holes is p-type. When the recombination takes ... Gallium Arsenide Phosphite (GaAsP) : Red or Yellow. Gallium Phosphite (GaP) : Red or Green.

Description : Draw the characteristics of tunnel diode, showing operating regions. State two applications of tunnel diode.

Last Answer : Applications: One of the important application of a tunnel diode is in high speed computers where the switching times in the order of nanoseconds or picoseconds are desirable. A tunnel diode can be ... In digital networks. 2. As a high speed switch. 3. As a high frequency oscillator.

Description : Define dynamic resistance of diode. State, how it is calculated using forward characteristics of diode.

Last Answer : Definition: The resistance offered by the diode to the AC operating conditions is known as the Dynamic resistance' or Incremental resistance' or AC resistance' of a diode. It is ... Dynamic resistance is actually the reciprocal of the slope of the forward characteristics.

Description : Draw symbol and state one application of zener diode and LED.

Last Answer : Diagram: Application of Zener diode:  It is used as voltage regulator. Used in protection circuits for MOSFET. Used in pulse amplifier. Used in clipping circuits. ... alarm systems 7-segment, 16- segment and dot matrix displays Indicating power ON/OFF conditions

Description : State the necessity of rectifier and filter circuits.

Last Answer : Need of Rectifiers: Many electronic devices and circuits work on DC. It is then needed to convert A.C. into D.C. Rectifier is the best and cheapest way to provide D.C. for electronic devices. ... moved from the pulsating D.C. to obtain pure D.C. signal. To remove this filter circuit is used. 

Description : State and explain superposition theorem.

Last Answer : Superposition theorem states that: In a linear circuit with several sources the voltage and current responses in any branch is the algebraic sum of the voltage and current responses due to each source acting ... branch to find the response on the branch due to the combined effect of all the sources.

Description : State and explain Thevenin’s theorem

Last Answer : Thevenin's Theorem states that Any linear circuit containing several voltages and resistances can be replaced by just one single voltage in series with a single resistance connected across the load . ... Thevenin's equivalent resistance Rth forms Thevenin's equivalent circuit as shown below.

Description : Write working principle of photodiode and state its two applications.

Last Answer : Working principle of photodiode:   Working principle: A photodiode is a PN- junction diode that consumes light energy to produce electric current. Sometimes it is also called as photo- ... Optical remote control Smoke detectors Flame detectors Intruder alert security system 

Description : Draw construction of Schottky diode and state it’s four applications.

Last Answer : Applications :- 1. RF mixer and detector diode: 2. Power rectifier 3. Voltage clamping 4. Stand alone photovoltaic systems in order to prevent batteries from discharging purpose for the solar panels at night 5. Rectifiers in power supplies.

Description : State any Four specifictions of capacitor and explain any two in details.

Last Answer : Specifictions of capacitor: 1.Dielectric material 2.Capacitance value 3.Working voltage 4.Tolerence 5.Temperature coefficient 6.Power factor 7.C/V ratio 9.Insulation resistance Explanation: 1.Working ... side from actual value. 4.C/V ratio: It is the ratio of capacitance to volume.

Description : State the need of Rectifier circuits.

Last Answer : The DC power supply is essential for operation of many electronic devices and circuits.This DC voltage is obtained from AC source.Rectifier circuit is important circuit for this conversion.

Description : State any Four applications of PN junction diode.

Last Answer : 1. Rectifiers in power supplies, 2. Detectors in RF, 3 .Clippers, 4. In clamping networks used as DC Restorers, 5. As switches in digital logic circuits.

Description : What is magnetic material ? State it’s two applications.

Last Answer : Magnetic materials are those materials that can be either attracted or repelled when placed in an external magnetic field and can be magnetized themselves. OR The materials which provide path to ... . Applications: 1.Floppy disc ,hard disc  2.Motors and generators  3.Biomedical equipment

Description : State and explain Thevenin’s theorem with suitable example.

Last Answer : Statement: Any network containing active and/or passive elements and one or more dependent and/or independent voltage/or current sources can be replaced by an equivalent network containing a voltage source ( ... given by IL =VTH/ (RTH+RL) figures above illustrate the concept of Thevenin s theorem

Description : State the advantages and disadvantages of series inductor and shunt capacitor filter.

Last Answer : Advantages of series inductor filter 1. It has low ripple factor at heavy load currents (i.e. low load resistance) 2. It has no surge current through the diode. 3. It reduces the ripple in the DC ... . 3. It has low output voltages for heavy loads. 4. Ripple factor is dependent on the load.

Description : Draw π-filter and state its working.

Last Answer : Circuit Diagram:   Working : It consists of a filter capacitor C1 connected across the rectifier output, a choke L is series and another filter capacitor C2 connected across the load RL. The ... which the choke has failed to block. Therefore, only d.c component appears across the load. 

Description : List different types of capacitors? State the dielectric materials used for it.

Last Answer : Types of capacitors: 1. Electrolytic capacitor 2. Variable capacitor 3. Air ganged capacitor 4. PVC ganged capacitor 5. Trimmer capacitor Dielectric materials used in capacitors: 1. Air 2. ... Ceramic 5. Porcelain 6. Polystyrene. 7. Fibre 8. Bakelite 9. Waxed paper 10.Plastic

Description : State the functions of following essential parts of electrolytic capacitor. 1. Aluminium foil 2. Oxide film 3. Spacers 4. Aluminium container

Last Answer : 1. Aluminium Foil – It serves as a positive electrode called anode  2. Oxide film – It acts as a dielectric medium.  3. Spacer- It is used to provide separation and hold the electrolyte.  4. Aluminium container- It serves as a negative electrode called cathode.

Description : State KVL and KCL

Last Answer : Statement of Kirchhoff's Current Law or KCL:  In any electrical network, the algebraic sum of the currents meeting at a point or junction is zero.  (OR)  Total current entering a junction or node is exactly ... all voltages within the loop must be equal to zero.  ∑ IR + ∑ emf = 0 round a mesh

Description : Define rectifier. State its types.

Last Answer : A rectifier is defined as an electronic device which converts alternating (AC) voltage or current into unidirectional/ pulsating (D.C) voltage or current. Types of Rectifier: 1. Half wave rectifier 2. Full wave rectifier a. Centre tapped full wave rectifier b. Full wave bridge rectifier

Description : State the specifications of capacitor.

Last Answer : The important specifications of capacitor are: 1. Capacitance ( C ) Value 2. Dielectric material 3. Working Voltage (WV) 4. Power factor 5. Physical Size 6. Insulation resistance 7. C/ ... ( %) 9 Leakage Current 10 Temperature Coefficient (TC) 11 Equivalent Series Resistance ( ESR )

Description : Define given parameters and state their values for bridge rectifier (i) Ripple factor (ii) PIV of diode.

Last Answer : Ripple Factor: Ripple Factor is defined as the ratio of RMS value of the AC component of output to the DC or average value of the output. Mathematically it is expressed as, ( ... which appears across non-conducting reverse biased diode. (ii) PIV of diode for bridge rectifier-Vm

Description : State the advantages of L and C filter. 

Last Answer : Advantages of L filter 1. It has low ripple factor at heavy load currents (i.e. low load resistance) 2. It has no surge current through the diode. 3. It reduces the ripple in the DC output ... . It is more suitable for light loads. 6. It has no load voltage equal to maximum transformer voltage. 

Description : State the necessity of wave-shaping circuit.

Last Answer : 1. To limit the voltage level of the waveform to some present value. 2. To shift the waveform to a particular voltage level. 3. To generate one wave from the other. 4. To cut the negative and positive portions of the waveform.

Description : State different types of filters.

Last Answer : Types of filters: 1. Series inductor (or choke) filter 2. Shunt capacitor filter 3. Choke input (LC or L type) filter 4. Capacitor input (CLC or πtype) filter

Description : State superposition theorem with suitable example

Last Answer : Superposition theorem: Superposition theorem states that in any linear network containing two or more sources, the response (current) in any element is equal to the algebraic sum of the ... by individual sources acting alone, while the other sources are replaced by their internal resistances.

Description : State Norton’s theorem with suitable example

Last Answer : Statement:- “Any linear, active, resistive, network containing one or more voltage and / or current sources can be replaced by an equivalent circuit containing a current source called Norton’s equivalent current ISC and an equivalent resistance in parallel.”

Description : State the need of filters. 

Last Answer :  The output of a rectifier is pulsating D.C. [i.e. it contain A.C along with D.C components]. The A.C. components are undesirable and must be removed from the pulsating D.C to obtain pure D.C. signal. To remove the ripples, filter circuit is used. 

Description : Draw construction of PVC gang capacitor and describe it’s working.

Last Answer :  Diagram Working  In plastic core capacitor, poly-vinyl chloride (PVC) type of plastic film is used as dielectric between the fixed & movable vanes instead of air. This increases ... & results in great reduction of size of capacitor in comparison with the air core capacitor.

Description : Describe construction of Aluminium Electrolytic capacitor.

Last Answer : A plain foil dry electrolytic capacitor is made by forming a coating of aluminium oxide on both sides of an aluminium foil. Two strips of aluminium foil used are then separated by two layers of porous ... is rolled up the ends closed with wax and then sealed into an aluminium container.

Description : Define rectification efficiency. Give its formula.

Last Answer : The ratio of output DC power delivered to the load to the applied input AC power is called rectification efficiency. It is denoted by η. η = Output DC power delivered to the load / Input AC power from transformer secondary η = Pdc / Pac

Description : List two applications of LDR.

Last Answer : 1. It is used for automatic contrast of brightness control in television receivers. 2. It is used as a proximity switch. 3. It is used in the street light control circuits. 4. It is used in the ... security alarms. 9. It is used in the smoke detectors. 10. It is used in the infrared astronomy.

Description : Define permeability and reluctivity of magnetic material. 

Last Answer : Permeability is the capability of a specific material to allow the flow of magnetic flux more easily. Thus higher permeability enables a material to pass more magnetic flux. Reluctivity is equal to the ratio of the intensity of the magnetic field to the magnetic induction of the material.