A shunt generator running at 1000 r.p.m. has generated e.m.f. as 200 V. If the speed increases to 1200 r.p.m...

A shunt generator running at 1000 r.p.m. has generated e.m.f. as 200 V. If the speed increases to 1200 r.p.m., the generated e.m.f. will be nearly?

by

2 Answers

Answer :

A shunt generator running at 1000 r.p.m. has generated e.m.f. as 200 V. If the speed increases to 1200 r.p.m., the generated e.m.f. will be nearly 240 V.

by

Answer :

200V/E2 = 1000/1200
E2= 240 V
by

Related questions

The e.m.f. induced in the armature of a shunt generator is 600 V. The armature resistance is 0.1 ohm...

Description : The e.m.f. induced in the armature of a shunt generator is 600 V. The armature resistance is 0.1 ohm. If the armature current is 200 A, the terminal voltage will be?

Last Answer : The e.m.f. induced in the armature of a shunt generator is 600 V. The armature resistance is 0.1 ohm. If the armature current is 200 A, the terminal voltage will be 580 V.

A sinusoidal voltage of 5 Hz is applied to the field of a shunt generator. The armature voltage wave?

Description : A sinusoidal voltage of 5 Hz is applied to the field of a shunt generator. The armature voltage wave?

Last Answer : A sinusoidal voltage of 5 Hz is applied to the field of a shunt generator. The armature voltage wave will be of 5 Hz.

A cumulatively compounded long shunt generator when operating as a motor would be?

Last Answer : A cumulatively compounded long shunt generator when operating as a motor would be differentially compounded long shunt.

The e.m.f. generated in a D.C. generator is directly proportional to?

Last Answer : The e.m.f. generated in a D.C. generator is directly proportional to speed of armature.

In a D.C. generator the ripples in the direct e.m.f. generated are reduced by?

Last Answer : In a D.C. generator the ripples in the direct e.m.f. generated are reduced by using carbon brushes of superior quality.

A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance

Description : A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is

Last Answer : A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is 36 Ohm

If residual magnetism is present in a D.C. generator, the induced e.m.f. at zero speed will be?

Description : If residual magnetism is present in a D.C. generator, the induced e.m.f. at zero speed will be?

Last Answer : If residual magnetism is present in a D.C. generator, the induced e.m.f. at zero speed will be zero.

A 220 V D.C. generator is run at full speed without any excitation. The open circuit voltage will be?

Last Answer : A 220 V D.C. generator is run at full speed without any excitation. The open circuit voltage will be about 2 V.

If the speed of a D.C. shunt motor is increased, the back e.m.f. of the motor will?

Last Answer : If the speed of a D.C. shunt motor is increased, the back e.m.f. of the motor will increase.

In case of D.C. shunt motors the speed is dependent on back e.m.f. only because?

Last Answer : In case of D.C. shunt motors the speed is dependent on back e.m.f. only because flux is practically constant in D:C. shunt motors.

The purpose of retardation test on D.C. shunt machines is to find out?

Last Answer : The purpose of retardation test on D.C. shunt machines is to find out stray losses.

The mechanical power developed by a shunt motor will be maximum when the ratio of back e.m.f. to applied voltage is?

Last Answer : The mechanical power developed by a shunt motor will be maximum when the ratio of back e.m.f. to applied voltage is 0.5.

A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s.

Description : A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be

Last Answer : A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be 474 V

Why does the speed of a DC shunt motor decrease as the load increases?

Description : Why does the speed of a DC shunt motor decrease as the load increases?

Last Answer : Because if the load is increasing then the torque must also be increase. If not then the speed of motor will decrease.

If the field of a D.C. shunt motor gets opened while motor is running?

Last Answer : If the field of a D.C. shunt motor gets opened while motor is running the motor will attain dangerously high speed.

The critical resistance of the D.C. generator is the resistance of?

Last Answer : The critical resistance of the D.C. generator is the resistance of field.

Armature reaction in a generator results in?

Last Answer : Armature reaction in a generator results in demagnetisation of leading pole tip and magnetisation of trailing pole tip.

In a separately excited generator supplying rated load the armature reaction?

Last Answer : In a separately excited generator supplying rated load the armature reaction is always present.

In a level compounded D.C. generator, full load terminal voltage is?

Last Answer : In a level compounded D.C. generator, full load terminal voltage is equal to no-load terminal voltage.

In over compounded generator, full load terminal voltage is?

Last Answer : In over compounded generator, full load terminal voltage is more than no load terminal voltage.

In case of a flat compounded generator?

Last Answer : In case of a flat compounded generator voltage remains constant irrespective of the load.

An exciter for a turbo generator is a?

Last Answer : An exciter for a turbo generator is a shunt generator.

In a D.C. generator in case the resistance of the field winding is increased, then output voltage will?

Last Answer : In a D.C. generator in case the resistance of the field winding is increased, then output voltage will decrease.

A D.C. generator can be considered as?

Last Answer : A D.C. generator can be considered as rotating amplifier.

In a D.C. generator the critical resistance refers to the resistance of?

Last Answer : In a D.C. generator, the critical resistance refers to the resistance of field.

Flashing the field of D.C. generator means?

Last Answer : Flashing the field of D.C. generator means creating residual magnetism by a D.C. source.

If a D.C. generator fails to build up the probable cause could not be?

Last Answer : If a D.C. generator fails to build up the probable cause could not be field resistance less than the critical resistance.

The purpose of providing dummy coils in a generator is?

Description : The purpose of providing dummy coils in a generator is?

Last Answer : The purpose of providing dummy coils in a generator is to provide mechanical balance for the rotor.

In a D.C. generator the magnetic neutral axis coincides with the geometrical neutral axis, when?

Last Answer : In a D.C. generator the magnetic neutral axis coincides with the geometrical neutral axis, when there is no load on|he generator.

In a D.C. generator the number of mechanical degrees and electrical degrees will be the same when?

Last Answer : In a D.C. generator the number of mechanical degrees and electrical degrees will be the same when number of poles is 2.

D.C. generator generally preferred for charging automobile batteries is?

Last Answer : D.C. generator generally preferred for charging automobile batteries is long shunt compound generator.

The armature core of a D.C. generator is usually made of?

Last Answer : The armature core of a D.C. generator is usually made of silicon steel.

The demagnetising component of armature reaction in a D.C. generator?

Last Answer : The demagnetising component of armature reaction in a D.C. generator reduces generator e.m.f.

Welding generator will have?

Last Answer : Welding generator will have lap winding.

If brushes of a D.C. generator are moved in order to bring these brushes in magnetic neutral axis, there will be?

Last Answer : If brushes of a D.C. generator are moved in order to bring these brushes in magnetic neutral axis, there will be crossmagnetisation as well as demagnetising.

In case of a 4-pole D.C. generator provided with a two layer lap winding with sixteen coils, the pole pitch will be?

Last Answer : In case of a 4-pole D.C. generator provided with a two layer lap winding with sixteen coils, the pole pitch will be 8.

A separately excited generator as compared to a self-excited generator?

Last Answer : A separately excited generator as compared to a self-excited generator is amenable to better voltage control, more stable, has exciting current independent of load current.

For a D.C. generator when the number of poles and the number of armature conductors is fixed...

Description : For a D.C. generator when the number of poles and the number of armature conductors is fixed, then which winding will give the higher e.m.f. ?

Last Answer : Wave winding

In a D.C. generator, the iron losses mainly take place in?

Last Answer : In a D.C. generator, the iron losses mainly take place in armature rotor.

The condition for maximum efficiency for a D.C. generator is?

Last Answer : The condition for maximum efficiency for a D.C. generator is variable losses equal to constant losses.

The total losses in a well designed D.C. generator of 10 kW will be nearly?

Last Answer : The total losses in a well designed D.C. generator of 10 kW will be nearly 500 W.

A d.c. shunt motor runs at no load speed of 1140 r.p.m. At full load, armature reaction weakens the main flux by 5% whereas the armature circuit voltage drops by 10%. The motor full load speed in r.p.m. is (A) 1080 (B) 1203 (C) 1000 (D) 1200

Description : A d.c. shunt motor runs at no load speed of 1140 r.p.m. At full load, armature reaction weakens the main flux by 5% whereas the armature circuit voltage drops by 10%. The motor full load speed in r.p.m. is (A) 1080 (B) 1203 (C) 1000 (D) 1200

Last Answer : (A) 1080

A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2

Description : A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2 Ohm. If the machine is now operated as a motor at same terminal voltage and current but with the flux increased by 10%, the ratio of motor speed to generator speed is

Last Answer : A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2 Ohm. If the machine is now operated as a motor at same terminal voltage and current but with the flux increased by 10%, the ratio of motor speed to generator speed is 0.87

If field current is decreased in shunt dc motor, the speed of the motor

Description : If field current is decreased in shunt dc motor, the speed of the motor (a) remains same. (b) increases. (c) decreases. (d) none of the above.

Last Answer : increases

The speed of a D.C. shunt motor can be increased by?

Last Answer : The speed of a D.C. shunt motor can be increased by increasing the resistance in field circuit.

As the load is increased the speed of D.C. shunt motor will?

Last Answer : As the load is increased the speed of D.C. shunt motor will reduce slightly.

In a D.C. shunt motor, speed is?

Last Answer : In a D.C. shunt motor, speed is independent of armature current.

The speed of a D.C. shunt motor more than its full-load speed can be obtained by?

Last Answer : The speed of a D.C. shunt motor more than its full-load speed can be obtained by decreasing the field current.

Explain how sinusoidal AC voltage is generated by using simple one loop generator.

Description : Explain how sinusoidal AC voltage is generated by using simple one loop generator.

Last Answer : An electric current produced by means of electrical machine is known as generator which converts mechanical energy into electrical energy. When conductor cuts the magnetic flux, emf induced in it. (Faraday' ... upon position of armature. The nature of emf is alternating as shown by the waveform.