The rapid wear of brushes takes place due to?

by

1 Answer

Answer :

The rapid wear of brushes takes place due to abrasion from dust, excessive spring pressure, rough commutator bars, high mica insulation between com-mutation bars.

by

Related questions

Armature coil is short circuited by brushes when it lies?

Last Answer : Armature coil is short circuited by brushes when it lies along neutral axis.

The number of brushes in a commutator depends on?

Last Answer : The number of brushes in a commutator depends on amount of current to be collected.

The material for commutator brushes is generally?

Last Answer : The material for commutator brushes is generally carbon.

Brushes of D.C. machines are made of?

Last Answer : Brushes of D.C. machines are made of carbon.

Copper brushes in D.C. machine are used?

Last Answer : Copper brushes in D.C. machine are used where low voltage and high currents are involved.

In lap winding, the number of brushes is always?

Last Answer : In lap winding, the number of brushes is always same as the number of poles.

In a DC motor, it is important to place the brushes along ______

Description : In a DC motor, it is important to place the brushes along ______ A) Magnetic Neutral Axis B) Normal Geometric Axis C) Nominal Geometric Axis D) None of these

Last Answer : In a DC motor, it is important to place the brushes along Magnetic Neutral Axis

How to Wear a Cup

Description : How to Wear a Cup

Last Answer : How to Wear a Cup When one says wearing a cup , it usually doesn't mean literally wearing a drinking cup. Athletic cups are used by male athletes to protect their groins from getting hurt or ... a goalie's athletic cup is double-padded due to the higher possibility of him facing fast slap shots.

Brushes of DC machine are made up of ?

Description : Brushes of DC machine are made up of ?

Last Answer : Brushes of DC machine are made up of carbon.

In a DC shunt generator working on load, the brushes are moved forward in the direction of

Description : In a DC shunt generator working on load, the brushes are moved forward in the direction of rotation, as a result of this, commutation will   (a) Improve but terminal voltage will fall   (b) ... will fall   (c) Improve and terminal voltage will rise   (d) worsen and terminal voltage will rise 

Last Answer : In a DC shunt generator working on load, the brushes are moved forward in the direction of rotation, as a result of this, commutation will Improve but terminal voltage will fall 

If brushes of a D.C. generator are moved in order to bring these brushes in magnetic neutral axis, there will be?

Last Answer : If brushes of a D.C. generator are moved in order to bring these brushes in magnetic neutral axis, there will be crossmagnetisation as well as demagnetising.

In D.C. generators, the brushes on commutator remain in contact with conductors which?

Last Answer : In D.C. generators, the brushes on commutator remain in contact with conductors which lie under interpolar region.

Which of the listed conditions might contribute to very rapid wearing of a DC machine's commutator bars? A. A grounded commutator bar B. Using improper carbon brushes C. Aligning the front and rear mica V-rings improperly D. An open circuit in the armature

Description : Which of the listed conditions might contribute to very rapid wearing of a DC machine's commutator bars? A. A grounded commutator bar B. Using improper carbon brushes C. Aligning the front and rear mica V-rings improperly D. An open circuit in the armature

Last Answer : Answer: B

Which of the damages listed can occur to the components of a winch master control switch, if the cover gasket becomes deteriorated? A. Overheating of the winch motor. B. Contamination of lube oil. C. Sparking at the winch motor brushes. D. Rapid corrosion of switch components.

Description : Which of the damages listed can occur to the components of a winch master control switch, if the cover gasket becomes deteriorated? A. Overheating of the winch motor. B. Contamination of lube oil. C. Sparking at the winch motor brushes. D. Rapid corrosion of switch components.

Last Answer : Answer: D

_____ brushes are fragile and cause excessive wear of commutator, (a) Natural graphite (b) Hard carbon (c) Electro graphitic (d) Metal graphite

Description : _____ brushes are fragile and cause excessive wear of commutator, (a) Natural graphite (b) Hard carbon (c) Electro graphitic (d) Metal graphite

Last Answer : (a) Natural graphite

The following are true about entopic phenomenon: a. it can be produced by cells in the vitreous b. it can be produced by palpation of the eyeballs c. the size of one's pupil can be observed with a pinhole d. asteroid hyalosis causes significant visual disturbance due to entopic phenomenon e. Haidinger's brushes are produced by the inner plexiform layers

Description : The following are true about entopic phenomenon: a. it can be produced by cells in the vitreous b. it can be produced by palpation of the eyeballs c. the size of one's ... significant visual disturbance due to entopic phenomenon e. Haidinger's brushes are produced by the inner plexiform layers

Last Answer : the size of one's pupil can be observed with a pinhole

The slight curvature at the lower end of the O.C.C. of a self-excited dc generator is due to

Description : The slight curvature at the lower end of the O.C.C. of a self-excited dc generator is due to  1. residual pole flux 2. high armature speed 3.magnetic inertia 4. high field circuit resistance

Last Answer : The slight curvature at the lower end of the O.C.C. of a self-excited dc generator is due to magnetic inertia

Eddy currents are induced in the pole shoes of a D.C. machine due to?

Description : Eddy currents are induced in the pole shoes of a D.C. machine due to?

Last Answer : Eddy currents are induced in the pole shoes of a D.C. machine due to relative rotation between field and armature.

Machining is never used for rapid prototyping because it takes too long. a.TRUE b.FALSE c. d.

Description : Machining is never used for rapid prototyping because it takes too long. a.TRUE b.FALSE c. d.

Last Answer : b.FALSE

Uneven wear of the commutator surface on a direct current propulsion motor can be caused by _____________. A. rapid change in load B. excessive operation at light load C. incorrect brush staggering D. unequal pole spacing

Description : Uneven wear of the commutator surface on a direct current propulsion motor can be caused by _____________. A. rapid change in load B. excessive operation at light load C. incorrect brush staggering D. unequal pole spacing

Last Answer : Answer: C

One of the generator bearing shells is generally insulated from the end housing in order to prevent _____________. A. rapid brush wear B. residual magnetism leak off C. excessive field winding heat D. circulation of shaft currents

Description : One of the generator bearing shells is generally insulated from the end housing in order to prevent _____________. A. rapid brush wear B. residual magnetism leak off C. excessive field winding heat D. circulation of shaft currents

Last Answer : Answer: D

One of the generator or motor bearings is generally insulated from the end housing in order to prevent ________. A. rapid brush wear B. current leakage from the shaft C. excessive field winding heat D. circulation of shaft currents induced in the machine's frame

Description : One of the generator or motor bearings is generally insulated from the end housing in order to prevent ________. A. rapid brush wear B. current leakage from the shaft C. excessive field winding heat D. circulation of shaft currents induced in the machine's frame

Last Answer : Answer: D

In a D.C. generator, the iron losses mainly take place in?

Last Answer : In a D.C. generator, the iron losses mainly take place in armature rotor.

Assertion : The menstrual flow results due to breakdown of endometrial lining of the uterus and its blood vessels . Reason : Rapid fall in the level o

Description : Assertion : The menstrual flow results due to breakdown of endometrial lining of the uterus and its blood vessels . Reason : Rapid fall in the level o

Last Answer : Assertion : The menstrual flow results due to breakdown of endometrial lining of the uterus and its blood ... D. If both Assertion & Reason are False.

True statements concerning hypoadrenal shock include which of the following? A. Adrenocortical insufficiency may manifest itself as severe shock refractory to volume and pressor therapy. B. The presence of hyperglycemia and hypotension may suggest the diagnosis of shock due to adrenocortical insufficiency. C. Hydrocortisone does not interfere with the serum cortisol assay and should be given to hemodynamically unstable patients suspected of having hypoadrenal shock. D. The rapid adrenocorticotropic hormone (ACTH) stimulation test should be performed to help establish the diagnosis of acute adrenocortical insufficiency.

Description : True statements concerning hypoadrenal shock include which of the following? A. Adrenocortical insufficiency may manifest itself as severe shock refractory to volume and pressor therapy. B. ... test should be performed to help establish the diagnosis of acute adrenocortical insufficiency.

Last Answer : Answer: AD DISCUSSION: Shock due to acute adrenocortical insufficiency is relatively uncommon but must be considered when shock refractory to volume replacement and pressor therapy is present. ... and it is the corticosteroid of choice while the ACTH stimulation test is being performed

The knock in diesel engine occurs due to A. instantaneous and rapid burning of the first part of the charge B. instantaneous auto ignition of the last part of the charge C. delayed burning of the last part of the charge D. reduction of delay period

Description : The knock in diesel engine occurs due to A. instantaneous and rapid burning of the first part of the charge B. instantaneous auto ignition of the last part of the charge C. delayed burning of the last part of the charge D. reduction of delay period

Last Answer : ANSWER : A

Cancerous cells can easily be destroyed by radiations due to (a) rapid cell division (b) lack of nutrition (c) fast mutation (d) lack of oxygen

Description : Cancerous cells can easily be destroyed by radiations due to (a) rapid cell division (b) lack of nutrition (c) fast mutation (d) lack of oxygen

Last Answer : (a) rapid cell division

All of the following conditions are indicators of possible pressures on an entity except a. The industry in which the entity operates is declining. b. There is inadequate working capital due to declining profits or too rapid expansion. c. The client is heavily dependent on one or a few products or customers. d. There is a significant and prolonged understaffing of the accounting department

Description : All of the following conditions are indicators of possible pressures on an entity except a. The industry in which the entity operates is declining. b. There is inadequate working capital ... products or customers. d. There is a significant and prolonged understaffing of the accounting department

Last Answer : There is a significant and prolonged understaffing of the accounting department

Active and passive transports across cell membrane differ in (a) passive transport is nonselective(b) passive transport is along the concentration gradient while active transport is due to metabolic energy (c) active transport is more rapid (d) passive transport is confined to anions while active transport is confined to cations.

Description : Active and passive transports across cell membrane differ in (a) passive transport is nonselective (b) passive transport is along the concentration gradient while active transport is due to metabolic ... (d) passive transport is confined to anions while active transport is confined to cations.

Last Answer : (b) passive transport is along the concentration gradient while active transport is due to metabolic energy

Water hammer in a pipeline results from the (A) Bursting of pipelines due to closure by a valve (B) Rapid pressure change due to a rapid change in the rate of flow (C) Pressure increase due to closure of a valve resulting in decrease in rate of flow (D) None of these

Description : Water hammer in a pipeline results from the (A) Bursting of pipelines due to closure by a valve (B) Rapid pressure change due to a rapid change in the rate of flow (C) Pressure increase due to closure of a valve resulting in decrease in rate of flow (D) None of these

Last Answer : (B) Rapid pressure change due to a rapid change in the rate of flow

In a rapid sand filter, air binding is caused due to excessive (A) Negative pressure (B) Pressure (C) Turbidity (D) Water pressure

Description : In a rapid sand filter, air binding is caused due to excessive  (A) Negative pressure  (B) Pressure  (C) Turbidity  (D) Water pressure

Last Answer : (A) Negative pressure

The purpose of a surge tank is (A) To control the pressure variations due to rapid changes in the pipe line flow (B) To eliminate water hammer possibilities (C) To regulate flow of water to turbines by providing necessary retarding head of water (D) All of the above

Description : The purpose of a surge tank is (A) To control the pressure variations due to rapid changes in the pipe line flow (B) To eliminate water hammer possibilities (C) To regulate flow of water to turbines by providing necessary retarding head of water (D) All of the above

Last Answer : Answer: Option D

The high strength of rapid hardening cement at early stage, is due to its (A) Finer grinding (B) Burning at high temperature (C) Increased lime cement (D) Higher content of tricalcium

Description : The high strength of rapid hardening cement at early stage, is due to its (A) Finer grinding (B) Burning at high temperature (C) Increased lime cement (D) Higher content of tricalcium

Last Answer : Answer: Option C

Rapid hardening cement attains early strength due to (A) Larger proportion of lime grounded finer than normal cement (B) Lesser proportion of lime grounded coarser than normal cement (C) Lesser proportion of lime grounded finer than normal cement (D) Excess percentage of gypsum

Description : Rapid hardening cement attains early strength due to (A) Larger proportion of lime grounded finer than normal cement (B) Lesser proportion of lime grounded coarser than normal cement (C) Lesser proportion of lime grounded finer than normal cement (D) Excess percentage of gypsum

Last Answer : Answer: Option A

Early attainment of strength in rapid hardening cement is mainly due to (A) Gypsum (B) Finer grinding (C) Tri-calcium silicate (D) Tri-calcium aluminate

Description : Early attainment of strength in rapid hardening cement is mainly due to (A) Gypsum (B) Finer grinding (C) Tri-calcium silicate (D) Tri-calcium aluminate

Last Answer : Answer: Option B

Due to which of the following reasons the cables should not be operated too hot ? (a) The oil may loose its viscosity and it may start drawing off from higher levels (b) Expansion of the oil may cause the sheath to burst (c) Unequal expansion may create voids in the insulation which will lead to ionization (d) The thermal instability may rise due to the rapid increase of dielectric losses with temperature (e) All of the above

Description : Due to which of the following reasons the cables should not be operated too hot ? (a) The oil may loose its viscosity and it may start drawing off from higher levels (b) Expansion of the ... instability may rise due to the rapid increase of dielectric losses with temperature (e) All of the above

Last Answer : (e) All of the above

Europe‟s rapid economic recovery after World War II was mainly due to: (a) Truman Doctrine (b) Big Four Conference (c) Marshall Plan (d) All of these (e) None of these

Description : Europe‟s rapid economic recovery after World War II was mainly due to: (a) Truman Doctrine (b) Big Four Conference (c) Marshall Plan (d) All of these (e) None of these

Last Answer : (c) Marshall Plan

raft increases with increase in forward speed for most of the implement, mainly due to a) More rapid acceleration of any soil particles that is moved appreciably b) More working width c) Increased working depth d) Draft decreases with increase in speed of implement

Description : raft increases with increase in forward speed for most of the implement, mainly due to a) More rapid acceleration of any soil particles that is moved appreciably b) More working width c) Increased working depth d) Draft decreases with increase in speed of implement

Last Answer : a) More rapid acceleration of any soil particles that is moved appreciably

Rapid intravenous injection of clonidine causes rise in BP due to: A. Stimulation of vasomotor centre B. Release of noradrenaline from adrenergic nerve endings C. Agonistic action on vascular α2 adrenergic receptors D. Cardiac stimulation

Description : Rapid intravenous injection of clonidine causes rise in BP due to: A. Stimulation of vasomotor centre B. Release of noradrenaline from adrenergic nerve endings C. Agonistic action on vascular α2 adrenergic receptors D. Cardiac stimulation

Last Answer : C. Agonistic action on vascular α2 adrenergic receptors

How do I educate my wife on Shaving Brushes for *********?

Description : How do I educate my wife on Shaving Brushes for Christmas?

Last Answer : answer:You definitely want one made of badger. When you figure out how to educate a mate, let us all know, please.

What are your thoughts on art done through the computer which mimic brushes?

Description : What are your thoughts on art done through the computer which mimic brushes?

Last Answer : I think it’s brilliant. It takes just as much talent to create a piece of work like that as it does with a real brush and paint.

Today I found out there is actually a difference between hair brushes. What amazing discovery did you recently make?

Description : Today I found out there is actually a difference between hair brushes. What amazing discovery did you recently make?

Last Answer : That I wasn’t invited to the latest nekked pancake party.

Am I having an allergic reaction to my makeup and brushes?

Description : Am I having an allergic reaction to my makeup and brushes?

Last Answer : answer:I would give your face a break for a few days. Try a gentle cleanser and lotion, like Cetaphil.You could also apply a hydrocortisone cream to calm the inflamation. If your skin hasn't ... your breakout's done, you can isolate and figure out what the problem is. Try new brushes first.

I need some info on how PET bottles are turned into Takalon to make things such as cosmetics brushes.

Description : I need some info on how PET bottles are turned into Takalon to make things such as cosmetics brushes.

Last Answer : There are two excellent wikipedia articles that explain the process, Poly ethylene Terephthalate and PET bottle recycling

Does anyone know any good photoshop/brushes websites?

Description : Does anyone know any good photoshop/brushes websites?

Last Answer : I don’t know if this will be helpful or not but I really love my apple and the software that came with it for photoshop. Also, I have used the free stuff from Kodak.

Could anyone recommend me some good brushes for Adobe Illustrator ,Thanx V M!

Description : Could anyone recommend me some good brushes for Adobe Illustrator ,Thanx V M!

Last Answer : answer:Mmmm, can’t resist this one~ deviantart.com has tons – search under Resources > Applications > Illustrator > Or something to that effect!

What has 88 teeth but never brushes them? -Riddles

Description : What has 88 teeth but never brushes them? -Riddles

Last Answer : A Piano.

How many carbon brushes does an electric motor have ?

Description : How many carbon brushes does an electric motor have ?

Last Answer : Electric motor has 1 carbon brush.

What is the difference between Artisan and University brushes?

Description : What is the difference between Artisan and University brushes?

Last Answer : Artisan brushes are used for water mixable oils or acrylics whereas University brushes are made to be used with any media and are cheaper than Artisan brushes.