In any rotating machine that part which houses the conductors and in which e.m.f. induced is to be utilised is called?

by

1 Answer

Answer :

In any rotating machine that part which houses the conductors and in which e.m.f. induced is to be utilised is called armature.

by

Related questions

UNIT 1 fundamentals of AC rotating machine

Description : UNIT 1 fundamentals of AC rotating machine Contents 1.1 Introduction 1.2 Advantages 1.3 Parts of AC machines 1.4 Synchronous speed 1.5 AC winding 1.6 Winding factor ( ... alternator or generator 1.9 Numericals 1.10 Harmonic 1.11 Slot harmonics 1.12 Harmonics minimization

Last Answer : 1.2 Advantages: In practices most of alternator have rotating magnetic field type construction with stationary armature due to following reason. The generation level of AC voltage may be in the range ... at high speed. Only two Slip rings are required to excited the field by AC supply.

The induced e.m.f. in the armature conductors of a d.c. motor is?

Description : The induced e.m.f. in the armature conductors of a d.c. motor is?

Last Answer : The induced e.m.f. in the armature conductors of a d.c. motor is sinusoidal.

The commutator segments are connected to the armature conductors by means of?

Last Answer : The commutator segments are connected to the armature conductors by means of copper lugs.

The induced emf in the armature of a lap -wound four -pole dc machine having 100 armature conductors

Description : The induced emf in the armature of a lap -wound four -pole dc machine having 100 armature conductors rotating at 600 rpm and with 1 Wb flux per pole is  (1) 1000V (2) 100V (3) 600V (4) 10,000V

Last Answer : The induced emf in the armature of a lap -wound four -pole dc machine having 100 armature conductors rotating at 600 rpm and with 1 Wb flux per pole is 1000V

State advantages of rotating field type alternators.

Description : State advantages of rotating field type alternators. 

Last Answer : Advantages of Rotating Field Type Alternator: 1) For high-voltage alternator, large space is required to accommodate conductors with insulation, as high voltage is induced in them. If field poles are placed ... is kept rotating. 8) Rotating field is comparatively light and can run with high speed. 

For protection of rotating machines against lightning surges _______ is used.

Description : For protection of rotating machines against lightning surges _______ is used.  (1) lightning arrester (2) capacitor (3) combination of lightning arrester and capacitor (4) lightning conductor and arrester

Last Answer : For protection of rotating machines against lightning surges combination of lightning arrester and capacitor is used. 

The slip of 400 V, three phase, 4 -pole induction motor when rotating at 1440 rpm is

Description : The slip of 400 V, three phase, 4 -pole induction motor when rotating at 1440 rpm is 

Last Answer : The slip of 400 V, three phase, 4 -pole induction motor when rotating at 1440 rpm is 4 percent

Losses which occur in rotating electric machines and do not occur in transformers are?

Description : Losses which occur in rotating electric machines and do not occur in transformers are?

Last Answer : Friction losses windage losses 

what is mean by rotating transformer ?

Description : what is mean by rotating transformer ?

Last Answer : Induction motor is a rotating transformer

advantage and disadvantages of stranded conductors.

Description : advantage and disadvantages of stranded conductors. 

Last Answer : Advantage and disadvantages of stranded conductors  Advantages of Stranded Conductors:-  1. Conductor becomes flexible.  2. Its weight reduces.  3. Easy for handling.  4. Easy to ... Stranded Conductors:-  1. Due to stranding of conductor its resistance increases slightly about 2%. 

Which have more free electrons: conductors or insulators?

Description : Which have more free electrons: conductors or insulators? 

Last Answer : Conductors have many free electrons whereas insulators have very few or none at all.

Name two good conductors, two good insulators, and two semiconductors.

Description : Name two good conductors, two good insulators, and two semiconductors.

Last Answer : In general all metals are good conductors, with silver the best and copper second.

The function of steel wire in ACSR conductors is

Description : The function of steel wire in ACSR conductors is (A) To take care of surges. (B) To reduce corona. (C) To reduce inductance. (D) To provide additional mechanical strength

Last Answer : The function of steel wire in ACSR conductors is To provide additional mechanical strength

The skin effect in conductors is due to non uniform distribution of current in it and major portion of current is

Description : The skin effect in conductors is due to non uniform distribution of current in it and major portion of current is near the _______ of conductor.  (1) Surface (2) Center (3) Complete cross section area (4) Axis

Last Answer : The skin effect in conductors is due to non uniform distribution of current in it and major portion of current is near the Surface of conductor. 

All good conductors have high?

Description : All good conductors have high?

Last Answer : All good conductors have high conductance.

Two copper conductors have equal length. The cross-sectional area of one conductor is four times that of the other...

Description : Two copper conductors have equal length. The cross-sectional area of one conductor is four times that of the other. If the conductor having smaller cross-sectional area has a resistance of 40 ohms the resistance of other conductor will be?

Last Answer : Two copper conductors have equal length. The cross-sectional area of one conductor is four times that of the other. If the conductor having smaller cross-sectional area has a resistance of 40 ohms the resistance of other conductor will be 10 ohms.

____are the conductors, which connect the consumer's terminals to the distribution.

Last Answer : Service mains are the conductors, which connect the consumer's terminals to the distribution.

In a D.C. machine stray loss is the sum of?

Last Answer : In a D.C. machine stray loss is the sum of iron loss and mechanical loss.

To avoid formation of grooves in the commutator of a D.C. machine?

Last Answer : To avoid formation of grooves in the commutator of a D.C. machine the brushes of opposite polarity should track each other.

Open circuited armature coil of a D.C. machine is?

Last Answer : Open circuited armature coil of a D.C. machine is identified by the scarring of the commutator segment to which open circuited coil is connected and indicated by a spark completely around the commutator.

In case of D.C. machine winding, number of commutator segments is equal to?

Last Answer : In case of D.C. machine winding, number of commutator segments is equal to number of armature coils.

Iron losses in a D.C. machine are independent of variations in?

Last Answer : Iron losses in a D.C. machine are independent of variations in load.

In a four-pole D.C. machine?

Last Answer : In a four-pole D.C. machine alternate poles are north and south.

A 36 slot, 4 -pole, dc machine has a simplex lap winding with two conductors per slot. The back pitch and

Description : A 36 slot, 4 -pole, dc machine has a simplex lap winding with two conductors per slot. The back pitch and front pitch adopted could be respectively

Last Answer : A 36 slot, 4 -pole, dc machine has a simplex lap winding with two conductors per slot. The back pitch and front pitch adopted could be respectively 19,17

How does one train to become a music conductor and how much do they earn?

Description : How does one train to become a music conductor and how much do they earn?

Last Answer : answer:Firstly, one must understand that conductors of orchestras are kind of like the rock stars of the classical music world. It's not impossible to become one, but it is a long hard road that ... , BTW, is essentially why I decided to drop the music major and opt for software engineering instead)

Why synchronous machine is called doubly excited machine?

Description : Why synchronous machine is called doubly excited machine?

Last Answer : Armature windings of synchronous machines either deliver 3 phase AC or absorb 3 phase AC source,  whereas field windings are energized from DC source. Thus due to presence of AC on armature and DC on field windings, synchronous machines are often referred as doubly excited machines.

What is the function of the roll forming machine ?

Description : What is the function of the roll forming machine ?

Last Answer : It is much easier to make croissants and other dinner rolls with a roll forming machine, than it is to roll the croissants by hand. The primary function, therefore, is to take the mixed dough and to thin it, then fold it, to prepare the dough for baking.

How to Repair a Washing Machine

Description : How to Repair a Washing Machine

Last Answer : How to Repair a Washing Machine One of the modern conveniences that most people cannot live without is their washing machine. Washing machines have become extremely commonplace in today's homes and while ... store for more information on fixing it, or whether it is worth replacing the entire unit.

How to Repair a Sewing Machine

Description : How to Repair a Sewing Machine

Last Answer : How to Repair a Sewing Machine As being one of the more heavy-duty appliances, sewing machines can provide many years of reliable use. Often they do need to be cleaned out due to the excess ... it does, you will have to increase the belt's tension by shifting the motor-mountain screws again.

How to Thread a Sewing Machine

Description : How to Thread a Sewing Machine

Last Answer : How to Thread a Sewing Machine So you finally found a pattern you want to sew. You've got your mom's trusty sewing machine out, but before you can start sewing away, you must first learn to thread the ... be an easy task. Soon, you'll be a whiz at threading a sewing machine and at sewing, too!

How to Clean a Washing Machine

Description : How to Clean a Washing Machine

Last Answer : How to Clean a Washing Machine You need a washing machine to clean all your clothes and have them smelling clean, so have you ever thought about what it takes to keep the actual machine clean? ... of the washing machine dry. Repeat cleaning the front load washing machine at least once a month.

10 Benefits of climber machine

Description : 10 Benefits of climber machine

Last Answer : 10 Benefits of climber machine The climber machine is tall, slim machine pinched away in the corner of the gym. Maybe you've seen someone on it apparently with his personal trainer in ferry. It's ... that will give more strength to the arms and legs and will increase the strength of the body too.

How to choose a rowing machine and how to use it?

Description : How to choose a rowing machine and how to use it?

Last Answer : Many people know that it is easy to calculate rowing athletes against the background of other people by a special article. The beauty of their figure is formed during rowing sessions, which provide an ... times for 10 minutes with 10-minute breaks, this will be tantamount to one 30-minute lesson.

Capsule coffee machine. What are the advantages?

Description : Capsule coffee machine. What are the advantages?

Last Answer : Having a coffee maker in the house helps us to easily cheer up and brighten up the beginning of the upcoming day in the morning, especially if the weather is unpleasant. A cup of hot ... favor is the fact that the profile of this manufacturer is precisely capsule coffee makers and coffee capsules.

How to choose a washing machine?

Description : How to choose a washing machine?

Last Answer : How to choose a washing machine? When choosing a washing machine, first of all, you need to think about the future location of its placement. According to what space you have, choose: ... occurs using a fairly simple method - the machine includes an additional rinse cycle. Enjoy the shopping!

Explain the basic parts of a slotting machine with neat sketch.

Description : Explain the basic parts of a slotting machine with neat sketch. 

Last Answer : Base or Bed The base is rigidly built to take up all the cutting forces and the entire load of the machine. The top of the bed is accurately finished to provide guideways on which ... return mechanism. 2. Variable speed reversible motor drive mechanism. 3. Hydraulic drive mechanism.

Write down the basic parts of a lathe machine with their proper functions.

Description : Write down the basic parts of a lathe machine with their proper functions. 

Last Answer : Important Parts of Lathe and their Functions 1. Bed It is the main body of the machine. All main components are bolted on it. It is usually made by cast iron due to its high compressive strength and ... carriage on bed. 12. Spindle: It is the main part of lathe which holds and rotates the chuck.

Write down the steps involved for internal thread cutting on lathe machine.

Description : Write down the steps involved for internal thread cutting on lathe machine.

Last Answer : Steps involved for internal thread cutting on lathe machine  1) Hole is first bored to the root diameter of the thread. 2) Tool is fixed on the tool post or on the boring bar adjusted the angle of ... the start. 10) Keep going until the calculated depth of cut has been reached on the top slide.

Types of slotting machine

Description : Types of slotting machine

Last Answer : 1. Puncher slotter 2. Precision slotter 3. Production slotter  Working Principle of Slotting machine:- The slotting machine is a reciprocating machine tool in which, The vertical slide holding the cutting ... longitudinal and cross feeds, a rotary feed motion is also provided in the work table. 

Define Feed and speed in shaping machine

Description : Define Feed and speed in shaping machine

Last Answer : 1) Feed: Feed (S) is the relative movement of the work or tool in a direction perpendicular to the axis of reciprocation of the ram per double stroke. It is expressed in mm per stroke. 2) Speed: ... speed is the speed at which the metal is removed by the cutting tool in a period of one minute.

Why poles of dc machine are laminated?

Description : Why poles of dc machine are laminated?

Last Answer : Poles of DC machines are laminated to reduce the eddy current losses in the poles.

Losses in dc machine..?

Last Answer : Copper losses,iron losses,variable losses , constant losees

Electrical specifications with values for washing machine.

Description : Electrical specifications with values for washing machine. 

Last Answer : 1. Type: Top loading / Front loading type 2. Capacity range: 6kg to 15kg 3. Motor Used: Induction motor 4. Input voltage: 100V- 240V 5. Power: in 1200W / Output power 100–400W{can go upto 1000W) 6. Efficiency: Max efficiency 31% 7. Wattage: 2.100-2.400 W 8. Current: 13A 9. Frequency: 50hz

function of exposer in photocopier machine.

Description : function of exposer in photocopier machine.

Last Answer : A bright lamp illuminates the original document, and the whitws areas of the original document reflect the light onto the surface of the photoconductive drum. The areas of the drum that are exposed ... discharge to the ground. The areas of the drum not exposed to light remains negatively charged

Draw block diagram for CNC drilling machine and explain its working.

Description : Draw block diagram for CNC drilling machine and explain its working.

Last Answer : Block diagram consist of the following points:  Machine tool with DC servo motor as feedback element. The transducer is added as adaptive control application.  The auxiliary controller ... line.  The interrupt pulses are generated by TBG and supplied to computer through inter

Explain concept of back emf in DC machine. State how it governs armature current.

Description : Explain concept of back emf in DC machine. State how it governs armature current. 

Last Answer : Back emf: When the armature of DC machine rotates under the influence of driving torque, the armature conductors move in the magnetic field and cut it and hence emf is induced in them. The ... flow of armature current i.e. it automatically changes the armature current to meet load requirements.

In 8085 microprocessor, how many T-states does OPCODE FETCH machine cycle normally require

Description : In 8085 microprocessor, how many T-states does OPCODE FETCH machine cycle normally require (i.e., when HOLD and WAIT signals are NOT forced)? A) 4 to 6 B) 3 to 8 C) 2 to 3 D) 8 to 12 

Last Answer : In 8085 microprocessor, how many T-states does OPCODE FETCH machine cycle normally require (i.e., when HOLD and WAIT signals are NOT forced)? A) 4 to 6 B) 3 to 8 C) 2 to 3 D) 8 to 12 

A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2

Description : A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2 Ohm. If the machine is now operated as a motor at same terminal voltage and current but with the flux increased by 10%, the ratio of motor speed to generator speed is

Last Answer : A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2 Ohm. If the machine is now operated as a motor at same terminal voltage and current but with the flux increased by 10%, the ratio of motor speed to generator speed is 0.87

In a synchronous machine, if the field flux axis ahead of the armature field axis in the direction of rotation,

Description : In a synchronous machine, if the field flux axis ahead of the armature field axis in the direction of rotation, the machine is operating as  (1) synchronous motor (2) synchronous generator (3) asynchronous motor (4) asynchronous generator

Last Answer : In a synchronous machine, if the field flux axis ahead of the armature field axis in the direction of rotation, the machine is operating as synchronous generator 

The 'Equal area criterion' for the determination of transient stability of a synchronous machine connected to

Description : The 'Equal area criterion' for the determination of transient stability of a synchronous machine connected to an infinite bus  (1) ignores line as well as synchronous machine resistance ... consideration the possibility of machine losing synchronism after it has survived during the first swing.

Last Answer : 1