1 Answer

Answer :

The electrical power to a meggar is provided by permanent magnet D.C. generator.

Related questions

Last Answer : In a meggar controlling torque is provided by coil.

Last Answer : The operating voltage of a meggar is about 100 V.

Description : The running winding of a single phase motor on testing with meggar is found to be ground. Most probable location of the ground will be?

Last Answer : The running winding of a single phase motor on testing with meggar is found to be ground. Most probable location of the ground will be at the slot edge where coil enters or comes out of the slot.

Description : State the importance of electrical power in day to day life. 

Last Answer : Importance of electrical power in day to day life: 1. Electrical energy is the basic necessity for domestic (residency), commercial, industrial, agriculture, consumers , transport (Electric ... agriculture products. iv) Running motors, furnaces of various kinds in industry, running locomotives 

Description : Problems on electrical power and energy

Last Answer : Problem on electrical power and energy 1 : https://youtu.be/ZvWHuMdmv9g Problem on electrical power and energy 2 : https://youtu.be/19IZMc6U2vs Problem on electrical power and energy 3 : https ... : https://youtu.be/iYqGIwA919A Problem on electrical power and energy : https://youtu.be/iWnWQz_mzHk

Description : Problem on electrical power and energy 2

Last Answer : Problem on electrical power and energy 2

Description : Problem on electrical power and energy 1

Last Answer : Problem on electrical power and energy 1

Description : Problem on electrical power and energy 7

Last Answer : Problem on electrical power and energy 7

Description : Problem on electrical power and energy 6

Last Answer : Problem on electrical power and energy 6

Description : Problem on electrical power and energy 5

Last Answer : Problem on electrical power and energy 5

Description : List any two types of fuels used in electrical power generation plants.

Last Answer : Types of fuels used in electrical power generation plants:  1) Solid fuels: Coal, Biomass: Wood, Nuclear fuel: Uranium, Plutonium  2) Liquid fuels: Diesel, Petrol  3) Gaseous Fuels: Natural gas, Producer ... 2) Wood 3) Uranium 4) Plutonium 5) Diesel 6) Petrol 7) Natural gas 8) Producer gas

Description : _______ electric power is the most common method used by electrical grids to transfer power.  (A) One-phase (B) Two-phase (C) Three-phase (D) None of the above

Last Answer : Three-phase electric power is the most common method used by electrical grids to transfer power. 

Description : When an alternating current passes through an ohmic resistance the electrical power converted into heat is?

Last Answer : When an alternating current passes through an ohmic resistance the electrical power converted into heat is true power.

Description : Power factor of an electrical circuit is equal to?

Last Answer : Power factor of an electrical circuit is equal to R/Z, cosine of phase angle difference between current and voltage, kW/kVA.

Description : What is the voltage used in a meggar?

Last Answer : 500V DC.

Description : Briefly explain how the power factor of an inductive circuit can be improved.

Last Answer : As we know that power factor should be corrected to ensure that the current supplied is cost friendly. Meaning the power factor should be around one but not greater than one(0.8-0.9) in a ... an inductive circuit due to the inductive reactance which oppose the change of current in the ac circuit. 

Last Answer : Commonly used instruments in power system measurement are induction.

Last Answer : The power factor of a single phase load can be calculated if the instruments available are three ammeters or three voltmeters.

Last Answer : In a dynamometer 3-phase power factor meter, the planes of the two moving coils are at 120°.

Last Answer : In a single phase power factor meter the phase difference between the currents in the two pressure coils is exactly 90°.

Last Answer : The two pressure coils of a single phase power factor meter have the same dimensions and the same number of turns.

Last Answer : A power factor meter has one current circuit and two pressure circuits.

Description : In a 3-phase power measurement by two wattmeter method the reading of one of the wattmeter was zero. The power factor of the load must be?

Last Answer : In a 3-phase power measurement by two wattmeter method the reading of one of the wattmeter was zero. The power factor of the load must be 0.5.

Description : In a 3-phase power measurement by two wattmeter method, both the watt meters had identical readings. The power factor of the load was?

Last Answer : In a 3-phase power measurement by two wattmeter method, both the watt meters had identical readings. The power factor of the load was unity.

Last Answer : In a low power factor wattmeter the compensating coil is connected in series with pressure coil.

Last Answer : In a low power factor wattmeter the pressure coil is connected to the load side of the current coil.

Last Answer : Power for lighting in passanger coach, in a long distance electric train, is provided through individual generator of bogie and batteries.

Last Answer : In case of locomotives the tractive power is provided by double cylinder, double acting steam engine.

Last Answer : In a steam locomotive electric power is provided through small turbo-generator.

Description : Indicate power of following electrical appliances?

Last Answer : Ans. Incandescent Lamp The incandescent lamp is the oldest electric light source still in general use.The incandescent lamp produces its light by the electrical heating of a wire (the filament ... The heat in the heating coil causes expansion in the thermostat which gradually disconnects the supply.

Description : An _____________is a network of electrical components used to supply, transfer and use electric power:  (A) Electric power system (B) Electric power (C) All of the above (D) None of the above

Last Answer : An Electric power system is a network of electrical components used to supply, transfer and use electric power.

Last Answer : To protect most of the electrical equipment handling low power, the types of relays used are thermocouple, electronic and bimetallic.

Description : An immersion heater of 400 watts kept on for 5 hours will consume electrical power of a. 2KWh b. 20KWh c. 6KWh d. 12KWh

Last Answer : a. 2KWh

Description : How is protection provided for OL and SC?

Last Answer : Damage from short circuits and overloads can be reduced or prevented by employing fuses, circuiDamage from short circuits and overloads can be reduced or prevented by employing fuses, circuit breakers, or other overload ... (a few seconds) due to currents say 1.1 to 1.5 times the normal current.

Description : What is the meaning of preferential trip? Why is it provided

Last Answer : Preferential trip is a kind of electrical arrangement on ship which is designed to disconnect the non-essential circuit i.e. non-essential load from the main bus bar in case of partial failure or overload ... gear) and trips the non essential loads (like AC and galley) and is a safety feature.

Description : Can you help me solve my electrical mystery?

Last Answer : Any signs of animal life? They can get in the walls and chew on the wires. Or is it the entire area served by that breaker? The breaker could be bad. It happens with anything mechanical.

Description : Air conditioning will not turn on, is it electrical?

Last Answer : Pull the Thermostat off the wall and see if it is connected correctly to the AC switch. There should be no dangling wires, and the post labeled for the AC should have an attached wire.

Description : Have you ever taken a shower or bath during an electrical storm?

Last Answer : I’ve heard this rumor, and I too question it’s validity. I mean, if electricity can’t travel up a stream of urine (See mythbusters) I’m pretty sure it couldn’t travel through a shower stream. Perhaps through the drain? In either case, I’ve taken a shower in a storm before, and.. well, you see?

Description : Electrical breaker box is buzzing-why??

Last Answer : No! Do not upgrade the breaker. The wire must also be upgraded if you do. Try plugging it in a different room. Is the problem still there?

Last Answer : Wire Through In load ( e.g. fan , lamp ) Etc. ) electric Power Supply To do Ordinary To the system Electric Waring Says. General In a sense Load Electric Power Supply To do For Of wires Ordinary In the system Being Electric Waring.

Description : What are the safety precautions when working on electrical equipments?

Last Answer : Switch off power, wear proper protective clothing, safety shoes, Notice board : Do not switch on - Men at work, stand on rubber mat, remove metal rings, watch bracelets, use proper insulated tools, ... work permit. In case of electrical shock, give proper first aid, check heart beat and pulse.

Description : What limits the electrical load?

Last Answer : The available power is fixed and the voltage is fixed, so the setting of the breaker or fuse is the normal current of the load. If the load exceeds the rated current, then the breaker or fuse will operate and limit the load.

Description : Devices which convert various physical quantities into electrical voltage are known as (a) Control system (b) sensors (c) level sensors (d) LDR

Last Answer : (b) sensors

Description : Alternating current generator converts.......... energy into electrical energy? a. mechanical energy b. chemical energy c. solar energy d. potential energy

Last Answer : a. mechanical energy

Description : Heat energy is converted into electrical energy a. solar cells b. thermocouples c. electric generators d. none

Last Answer : b. thermocouples

Description : Electrical energy is converted to heat at the rate of a. IRt b. I 2R c. I 2Rt d. VIt

Last Answer : b. I 2R

Description : All electrical appliances are connected in parallel to each other between the main line and neutral wire to get a. same current b. same current and potential difference c. different current but same potential difference d. different current and potential differences

Last Answer : c. different current but same potential difference

Description : Thermocouples convert a. heat energy into electrical energy b. heat energy into light energy c. heat energy into mechanical energy d. mechanical energy into heat energy

Last Answer : d. mechanical energy into heat energy

Description : What are the test and measuring instrument required in an Electrical depots?

Last Answer : Ans. Following are the test and measuring instruments required in an Electrical depots. a. Test lamp b. Line Tester c. Continuity tester d. Volt meter e. Ammeter f. Earth megger g. Megger h. Lux meter i. Power analyzer j. Infrared thermometer

Description : How to replace the electrical wiring in the apartment?

Last Answer : How to replace the electrical wiring in the apartment? In most cases, when renovating an apartment, a complete replacement of the electrical wiring is required, especially if the house was built in ... Upon completion of the finishing, the new electrical wiring in your apartment is ready for use.