To measure a resistance with the help of a potentiometer it is?

by

1 Answer

Answer :

To measure a resistance with the help of a potentiometer it is not necessary to standardise the potentiometer.

by

Related questions

can we use potentiometer for measuring resistance?

Last Answer : Yes we can use potentiometer for measuring resistance.

can voltmeter measure resistance?

Last Answer : Voltmeter is used to measure voltage in a circuit.Ohmmeter is used to measure the resistance of a component in a circuit.

Name the method used to measure following resistances:- (i) Low resistance (ii) Medium resistance (iii) Insulation resistance (iv) Earth resistance.

Description : Name the method used to measure following resistances:- (i) Low resistance (ii) Medium resistance (iii) Insulation resistance (iv) Earth resistance.

Last Answer : Following are the methods used to measure resistances:-  (i) Low resistance: 1.Voltmeter-Ammeter Method 2. Kelvin's Double bridge Method  (ii) Medium resistance: 1.Voltmeter-Ammeter Method 2. ... of Charge Method  (iv) Earth resistance : 1. Fall of Potential Method 2. Earth tester

To measure an A. C. voltage by using an A.C. potentiometer, it is desirable that...

Description : To measure an A. C. voltage by using an A.C. potentiometer, it is desirable that the supply for the potentiometer in taken?

Last Answer : To measure an A. C. voltage by using an A.C. potentiometer, it is desirable that the supply for the potentiometer in taken from the same source as the unknown voltage.

When the voltage across a battery is measured using a D.C potentiometer, the reading shows 1.08 V. But

Description : When the voltage across a battery is measured using a D.C potentiometer, the reading shows 1.08 V. But when the same voltage is measured using a Permanent Magnet Moving Coil (PMMC) voltmeter, the voltmeter reading shows 0.99 ... resistance of the battery, in Ohm , is (A) 150 (B) 100 (C) 50 (D) 200

Last Answer : When the voltage across a battery is measured using a D.C potentiometer, the reading shows 1.08 V. But when the same voltage is measured using a Permanent Magnet Moving Coil (PMMC) voltmeter, ... resistance of the voltmeter is 1100 Ohm , the internal resistance of the battery, in Ohm , is 100

In an AC. co-ordinate potentiometer, the currents in the phase and quadrature potentiometer are adjusted to be?

Last Answer : In an AC. co-ordinate potentiometer, the currents in the phase and quadrature potentiometer are adjusted to be out of phase by 90°.

The stator of phase shifting transformer for use in conjunction with an A.C. potentiometer usually has a?

Last Answer : The stator of phase shifting transformer for use in conjunction with an A.C. potentiometer usually has a two-phase winding.

In order to achieve high accuracy, the slide wire of a potentiometer should be?

Last Answer : In order to achieve high accuracy, the slide wire of a potentiometer should be as long as possible.

Basically a potentiometer is a device for?

Last Answer : Basically a potentiometer is a device for comparing two voltages.

A potentiometer may be used for?

Last Answer : A potentiometer may be used for measurement of resistance, measurement of current, calibration of ammeter, calibration of voltmeter.

A rheostat differs from potentiometer in the respect that it?

Description : A rheostat differs from potentiometer in the respect that it?

Last Answer : A rheostat differs from potentiometer in the respect that it has higher wattage rating.

A Pyrheliometer is an instrument to measure :

Description : A Pyrheliometer is an instrument to measure :  (A) temperature of solar photovoltaic cell  (B) intensity of direct solar radiation at normal incidence  (C) intensity of indirect solar radiation  (D) efficiency of a solar photovoltaic cell

Last Answer : A Pyrheliometer is an instrument to measure : intensity of direct solar radiation at normal incidence 

Piezoelectric Transducer is used to measure

Description : Piezoelectric Transducer is used to measure  (1) displacement (2) resistance (3) current (4) temperature

Last Answer : Piezoelectric Transducer is used to measure displacement 

An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic

Description : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be  (1) unaffected (2) decreased (3) increased (4) either decreased or increased depending on the direction of the DC field

Last Answer : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be either decreased or increased depending on the direction of the DC field

Which of the following can be used to measure the capacitance of a capacitor?

Description : Which of the following can be used to measure the capacitance of a capacitor? A) Rheostat B) Schering bridge C) Wheatstone bridge D) None of these

Last Answer : Which of the following can be used to measure the capacitance of a capacitor? A) Rheostat B) Schering bridge C) Wheatstone bridge D) None of these

It is required to measure the true open circuit e.m.f. of a battery. The best device is?

Last Answer : It is required to measure the true open circuit e.m.f. of a battery. The best device is D.C. potentiometer.

Which instruments are those which measure the total quantity of electricity delivered in a particular time?

Last Answer : Integrating instruments are those which measure the total quantity of electricity delivered in a particular time.

What is the unit of measure for voltage?

Description : What is the unit of measure for voltage?

Last Answer : Voltage measured in volts.

What type of meter is used to measure current?

Description : What type of meter is used to measure current?

Last Answer : Ammeter

What equipment is used to measure voltage?

Description : What equipment is used to measure voltage?

Last Answer : Voltmeter is used to measure voltage.

can ammeter measure ac?

Last Answer : Yes it can...

Resistance grounding is normally used for :

Description : Resistance grounding is normally used for :  (A) high voltage long over head transmission lines  (B) low voltage short over head transmission lines  (C) extra high voltage long over head transmission lines  (D) all the above

Last Answer : Resistance grounding is normally used for : low voltage short over head transmission lines

When measuring insulation resistance of cables using d.c. source, the galvanometer used should be initially

Description : When measuring insulation resistance of cables using d.c. source, the galvanometer used should be initially short circuited because  (A) Cables have a low value of capacitance which draws a high ... high value of charging current (D) Cables have a low value of capacitance and initial resistance

Last Answer : When measuring insulation resistance of cables using d.c. source, the galvanometer used should be initially short circuited because Cables have a high value of capacitance which draws a high value of charging current

A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an

Description : A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an ammeter with full scale deflection of 100 mA, the required shunt resistance is (A) 1 Ω (B) 1.001 Ω (C) 0.5 Ω (D) 10 Ω

Last Answer : A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an ammeter with full scale deflection of 100 mA, the required shunt resistance is 1.001 Ω

The transducer with negative temperature co-efficient of resistance is

Description : The transducer with negative temperature co-efficient of resistance is (A) Thermistor (B) Resistance Thermometer (C) Strain Gauge (D) Thermocouple

Last Answer : The transducer with negative temperature co-efficient of resistance is Thermistor

For measuring a very high resistance we should use?

Last Answer : For measuring a very high resistance we should use Meggar.

Which is an instrument which measures insulation resistance of an electric circuit relative to earth and one another?

Last Answer : Meggar is an instrument which measures the insulation resistance of an electric circuit relative to earth and one another.

do ammeters have resistance?

Last Answer : Yes ammeter has its own resistance Not only ammeter every electrical devices has there own resistance practicaly

How to Measure Optical Distortion

Description : How to Measure Optical Distortion

Last Answer : How to Measure Optical Distortion Optical Distortion is defined as a defect in an optical system. In this defect, the magnification of lines causes lines that are typically straight and sitting at an ... to measure optical illusions and also how the illusion is affecting the way you see a specimen.

How to Measure a Strain Gauge

Description : How to Measure a Strain Gauge

Last Answer : How to Measure a Strain Gauge There are several ways to measure strain. The most common is to use a strain gauge. In laymen's terms, a strain gauge is a device whose electrical ... who supply all the necessary strain gauges and materials from connection tags, to binding adhesives and training.

How to Read a Tape Measure

Description : How to Read a Tape Measure

Last Answer : How to Read a Tape Measure Introduction Reading a tape measure is fairly simple. At some point, you may need to learn this method. Everyone is presented with the need for this device at one time or ... hand. Take extra care and check the measurement 2 or 3 times to be sure that they are correct.

How to Measure Temperature

Description : How to Measure Temperature

Last Answer : How to Measure Temperature Whether you're measuring body temperature or dealing with high-temperature substances in laboratories, you need a very reliable way to measure heat. Thermometers and temperature ... or from an object. With these steps, you can measure temperature quickly and accurately.

How to Measure For Replacement Windows

Description : How to Measure For Replacement Windows

Last Answer : How to Measure For Replacement Windows You could have any number of reasons for wanting to replace your windows. Windows that are older are often far less energy efficient than the newer vinyl ... probably even give you a rebate for choosing energy efficient windows to replace your old windows.

How to Measure For a Garage Door

Description : How to Measure For a Garage Door

Last Answer : How to Measure For a Garage Door At some point you will probably need a new garage door. Before getting the new door, however, you will need to take some measurements. This article explains how to measure ... a new garage door you needn't worry if the garage door you buy will fit into the opening.

How to Measure Tire Sizes

Description : How to Measure Tire Sizes

Last Answer : How to Measure Tire Sizes Buying a new set of tires is just like buying shoes: you have to make sure that your tires fit perfectly on the wheel. Tires that are too small or too big for your ... , you can buy a set of tires designed and custom-fit to make your driving experience safe and secure.

Draw venture meter and write steps to measure flow rate.

Description : Draw venture meter and write steps to measure flow rate.

Last Answer : Venturi meter consists of three sections that is converging section, throat section and diverging section. The flow is introduced to the meter through the inlet with diameter D' . The inclined angle ... to 15o . Flow rate is proportional to the square root of the differential pressure.

Explain the term reactive power. Why it is sometimes essential to measure reactive power?

Description : Explain the term reactive power. Why it is sometimes essential to measure reactive power?

Last Answer : Reactive power: The reactive power (Q) is defined as the product of voltage(V), current (I) and sine of angle between voltage(V) and current( I) Therefore Reactive power Q = V I ... power so that corrective measures can be taken accordingly to maintain systems power factor near to the unity.

List any four measure knobs on front panel on CRO.

Description : List any four measure knobs on front panel on CRO.

Last Answer : Knobs on front panel of CRO: 1. Power ON- OFF 2. Intensity control 3. Focus control 4. Astigmatism control 5. Volt/Div control 6. Vertical position control 7. Invert 8. Horizontal position control 9. Synchronization. 10. Channel selection.

‘PMMC instrument is not suitable to measure AC quantity’. State the reason.

Description : ‘PMMC instrument is not suitable to measure AC quantity’. State the reason.

Last Answer : The direction of force exerted on moving coil depends on the direction of current flowing through moving coil. If the direction of magnetic field is kept constant, it produces unidirectional torque if the current is ... on the coil in one cycle to zero. Hence the meter cannot read A.C. quantities.

A _________ is used to measure the stator % winding temperature of the generator.

Description : A _________ is used to measure the stator % winding temperature of the generator.  (A) Thermocouple (B) Pyrometer (C) Resistance thermometer (D) Thermometer

Last Answer : A Resistance thermometer is used to measure the stator % winding temperature of the generator. 

An open-circuit test on a transformer is conducted primarily to measure?

Description : An open-circuit test on a transformer is conducted primarily to measure?

Last Answer : The open-circuit test in a transformer is used to measure

How do you measure power factor?

Description : How do you measure power factor?

Last Answer : P= 1.83*V*I*COS@ where P is power           V is voltage            I is current           COS @ is P.F COS@= P/(1.83*V*I)  in other way cos @ = true power/apparent power

A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up

Description : A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up to 300 V, the external resistance to be connected in series with the instrument is (A) 9997 Ω (B) 10000 Ω (C) 997 Ω (D) 10003 Ω

Last Answer : A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up to 300 V, the external resistance to be connected in series with the instrument is 9997 Ω

How many quarts are in a gallon?

Description : How many quarts are in a gallon?

Last Answer : 4?

What affect does the thickness of a wire have on its resistance?

Description : What affect does the thickness of a wire have on its resistance?

Last Answer : Ans: The resistance of a wire decreases as its thickness increases.

Which of these has the lowest resistance?

Description : Which of these has the lowest resistance?

Last Answer : b) Copper has the lowest resistance. 

Name two materials that have a different electric resistance.

Description : Name two materials that have a different electric resistance. 

Last Answer : Ans: a) copper, nichrome 

State the procedure for testing of earth pit resistance with necessary diagrams.

Description : State the procedure for testing of earth pit resistance with necessary diagrams.

Last Answer : Following procedure (Method) for testing of earth pit resistance with necessary diagrams. 1) Earth Tester : i) Three point method ii) Four point method 2) By Potential drop method 3 ... of that earthing pit. In this test the accuracy is less but electrical rods are not required. 

State the impact of inductance and resistance on transmission line performance

Description : State the impact of inductance and resistance on transmission line performance

Last Answer : Impact of inductance on transmission line: 1) It causes IXL drop in transmission line which affects regulation. 2) It is the only parameter which decides power transmission capacity of line i. ... is very small, it causes losses, temperature rise& poor voltage regulation so it cannot be neglected

What do you mean by exciting resistance and exciting reactance?

Description : What do you mean by exciting resistance and exciting reactance?

Last Answer : At no-load, a transformer behaves as a highly inductive load connected to the system which contains some resistance and inductance in parallel. The resistance is called exciting resistance R0 = V1/I w and reactance is called exciting reactance, X0 = V1/I mag