In an AC. co-ordinate potentiometer, the currents in the phase and quadrature potentiometer are adjusted to be?

by

1 Answer

Answer :

In an AC. co-ordinate potentiometer, the currents in the phase and quadrature potentiometer are adjusted to be out of phase by 90°.

by

Related questions

The stator of phase shifting transformer for use in conjunction with an A.C. potentiometer usually has a?

Last Answer : The stator of phase shifting transformer for use in conjunction with an A.C. potentiometer usually has a two-phase winding.

When the voltage across a battery is measured using a D.C potentiometer, the reading shows 1.08 V. But

Description : When the voltage across a battery is measured using a D.C potentiometer, the reading shows 1.08 V. But when the same voltage is measured using a Permanent Magnet Moving Coil (PMMC) voltmeter, the voltmeter reading shows 0.99 ... resistance of the battery, in Ohm , is (A) 150 (B) 100 (C) 50 (D) 200

Last Answer : When the voltage across a battery is measured using a D.C potentiometer, the reading shows 1.08 V. But when the same voltage is measured using a Permanent Magnet Moving Coil (PMMC) voltmeter, ... resistance of the voltmeter is 1100 Ohm , the internal resistance of the battery, in Ohm , is 100

To measure an A. C. voltage by using an A.C. potentiometer, it is desirable that...

Description : To measure an A. C. voltage by using an A.C. potentiometer, it is desirable that the supply for the potentiometer in taken?

Last Answer : To measure an A. C. voltage by using an A.C. potentiometer, it is desirable that the supply for the potentiometer in taken from the same source as the unknown voltage.

In order to achieve high accuracy, the slide wire of a potentiometer should be?

Last Answer : In order to achieve high accuracy, the slide wire of a potentiometer should be as long as possible.

Basically a potentiometer is a device for?

Last Answer : Basically a potentiometer is a device for comparing two voltages.

To measure a resistance with the help of a potentiometer it is?

Last Answer : To measure a resistance with the help of a potentiometer it is not necessary to standardise the potentiometer.

A potentiometer may be used for?

Last Answer : A potentiometer may be used for measurement of resistance, measurement of current, calibration of ammeter, calibration of voltmeter.

A rheostat differs from potentiometer in the respect that it?

Description : A rheostat differs from potentiometer in the respect that it?

Last Answer : A rheostat differs from potentiometer in the respect that it has higher wattage rating.

can we use potentiometer for measuring resistance?

Last Answer : Yes we can use potentiometer for measuring resistance.

In a single phase power factor meter the phase difference between the currents in the two pressure coils is?

Last Answer : In a single phase power factor meter the phase difference between the currents in the two pressure coils is exactly 90°.

A constellation diagram shows us the __________ of a signal element, particularly when we areusing twocarriers (one in-phase and one quadrature). A) amplitudeand phase B) amplitudeand frequency C) frequencyand phase D) none of the above

Description : A constellation diagram shows us the __________ of a signal element, particularly when we areusing twocarriers (one in-phase and one quadrature). A) amplitudeand phase B) amplitudeand frequency C) frequencyand phase D) none of the above

Last Answer : amplitudeand phase

How is a quadrature detector changed when used for phase demodulation?

Description : How is a quadrature detector changed when used for phase demodulation?

Last Answer : The quadrature grid signal is excited by a reference from the transmitter.

A d.c. potentiometer is designed to measure up to about 2V with a slide wire of 800 mm. A standard cell of

Description : A d.c. potentiometer is designed to measure up to about 2V with a slide wire of 800 mm. A standard cell of emf 1.18V obtains balance at 600 mm. A test cell is seen to obtain balance at 680 mm. The emf0fthe test cell is  A)1.00V B)1.34V C)1.50V D)1.70V 

Last Answer : A d.c. potentiometer is designed to measure up to about 2V with a slide wire of 800 mm. A standard cell of emf 1.18V obtains balance at 600 mm. A test cell is seen to obtain balance at 680 mm. The emf0fthe test cell is 1.34V

Potentiometer sensitivity can be increased by

Last Answer : Potentiometer sensitivity can be increased by Increasing the length of potentiometer wire.

In a series `LCR` circuit the frequency of a `10 V`, `AC` voltage soure is adjusted in such a fashion that the reactance of the inductor meausers `15

Description : In a series `LCR` circuit the frequency of a `10 V`, `AC` voltage soure is adjusted in such a fashion that the reactance of the inductor meausers `15

Last Answer : In a series `LCR` circuit the frequency of a `10 V`, `AC` voltage soure is adjusted in such a ... the series combination of `L` and `C`will be:

When paralleling two AC generators, the frequency of the incoming machine immediately prior to closing its breaker should be ____________. A. controlled by placing the governor switch in the automatic position B. adjusted with the voltage regulator C. slightly greater than the bus frequency D. slightly less than the bus frequency

Description : When paralleling two AC generators, the frequency of the incoming machine immediately prior to closing its breaker should be ____________. A. controlled by placing the governor switch in the automatic ... regulator C. slightly greater than the bus frequency D. slightly less than the bus frequency

Last Answer : Answer: C

The power factor at which a paralleled AC generator operates is usually adjusted by the _____________. A. connected load B. prime mover speed C. field excitation D. generator's rated voltage

Description : The power factor at which a paralleled AC generator operates is usually adjusted by the _____________. A. connected load B. prime mover speed C. field excitation D. generator's rated voltage

Last Answer : Answer: C

The frequency of an AC generator is adjusted by means of the ____________. A. main alternator field rheostat B. exciter field rheostat C. prime mover governor control D. equalizing reactor

Description : The frequency of an AC generator is adjusted by means of the ____________. A. main alternator field rheostat B. exciter field rheostat C. prime mover governor control D. equalizing reactor

Last Answer : Answer: C

For handling greater currents induction wattmeters are used in conjunction with?

Last Answer : For handling greater currents induction wattmeters are used in conjunction with current transformers.

Any convenient co-ordinate system or Cartesian co-ordinates which can be usedto define the picture is called a.spherical co-ordinates b.vector co-ordinates c.viewport co-ordinates d.world co-ordinates

Description : Any convenient co-ordinate system or Cartesian co-ordinates which can be usedto define the picture is called a.spherical co-ordinates b.vector co-ordinates c.viewport co-ordinates d.world co-ordinates

Last Answer : d.world co-ordinates

By changing the dimensions of the viewport, the and ofthe objects being displayed can be manipulated. a.Number of pixels and image quality b.X co-ordinate and Y co-ordinate c.Size and proportions d.All of these

Description : By changing the dimensions of the viewport, the and ofthe objects being displayed can be manipulated. a.Number of pixels and image quality b.X co-ordinate and Y co-ordinate c.Size and proportions d.All of these

Last Answer : c.Size and proportions

The window opened on the raster graphics screen in which the image will bedisplayed is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : The window opened on the raster graphics screen in which the image will bedisplayed is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : d.Interface window

What is the rectangle in the world defining the region that is to be displayed? a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : What is the rectangle in the world defining the region that is to be displayed? a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : c.World window

What is the name of the space in which the image is displayed? a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : What is the name of the space in which the image is displayed? a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : b.Screen co-ordinate system

The object space or the space in which the application model is defined is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : The object space or the space in which the application model is defined is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : a.World co-ordinate system

Which of this is compulsory for 2D reflection? a.Reflection plane. b.Origin c.Reflection axis d.Co-ordinate axis.

Description : Which of this is compulsory for 2D reflection? a.Reflection plane. b.Origin c.Reflection axis d.Co-ordinate axis.

Last Answer : c.Reflection axis

Find the co-ordinate where the equation 2x + 3y = 6 intersects x-axis. -Maths 9th

Description : Find the co-ordinate where the equation 2x + 3y = 6 intersects x-axis. -Maths 9th

Last Answer : Solution :-

Write the linear equation represented by line AB and PQ. Also find the co-ordinate of intersection of line AB and PQ. -Maths 9th

Description : Write the linear equation represented by line AB and PQ. Also find the co-ordinate of intersection of line AB and PQ. -Maths 9th

Last Answer : Solution :-

Draw the graph of the equation 3x + 4y = 12 and find the co-ordinates of the points of intersection of the equation with the co-ordinate axes. -Maths 9th

Description : Draw the graph of the equation 3x + 4y = 12 and find the co-ordinates of the points of intersection of the equation with the co-ordinate axes. -Maths 9th

Last Answer : Solution :-

Draw the bar graph of linear equation whose solution are represented by the points having difference the co-ordinate as 25 units -Maths 9th

Description : Draw the bar graph of linear equation whose solution are represented by the points having difference the co-ordinate as 25 units -Maths 9th

Last Answer : This answer was deleted by our moderators...

What do you mean by Co-ordinate Geometry? -Maths 9th

Description : What do you mean by Co-ordinate Geometry? -Maths 9th

Last Answer : (a) \(rac{2^n}{5^n}\)In any number the last digits can 0, 1, 2, 3, 4, 5, 6, 7, 8 and 9. Therefore, the last digit of each number can be chosen in 10 ways. ∴ Exhaustive number of ways = 10n. If the ... , favourable number of ways = 4n ∴ Required probability = \(rac{4^n}{10^n}\) = \(rac{2^n}{5^n}\).

What do you mean by Co-ordinates (Abscissa and Ordinate)? Explain with figure. -Maths 9th

Description : What do you mean by Co-ordinates (Abscissa and Ordinate)? Explain with figure. -Maths 9th

Last Answer : Co-ordinate Geometry is that branch of geometry in which two numbers, called co-ordinates are used to indicate the position of a point in a plane and which make use of algebraic methods in the study of geometric figures.

If (–5, 4) divides the line segment between the co-ordinate axes in the ratio 1 : 2, then what is its equation ? -Maths 9th

Description : If (–5, 4) divides the line segment between the co-ordinate axes in the ratio 1 : 2, then what is its equation ? -Maths 9th

Last Answer : (d) x = yThe equations of the given lines are: 4x + 3y = 12 ...(i) 3x + 4y = 12 ...(ii) Solving the simultaneous equations (i) and (ii), we get\(x\) = \(rac{12}{7}\), y = \(rac{12}{7}\)∴ Point of the ... )isy - 0 = \(\bigg(rac{rac{12}{7}-0}{rac{12}{7}-0}\bigg)\) (x - 0), i.e., y = x.

The straight line ax + by + c = 0 and the co-ordinate axes form an isosceles triangle under which of the following conditions ? -Maths 9th

Description : The straight line ax + by + c = 0 and the co-ordinate axes form an isosceles triangle under which of the following conditions ? -Maths 9th

Last Answer : (a) | a | = | b | The equation of line AB, i.e., ax + by + c = 0 in intercept form is ax + by = - c⇒ \(rac{x}{\big(-rac{c}{a}\big)}\) + \(rac{x}{\big(-rac{c}{b}\big)}\) = 1Δ AOB is isosceles Δ if OA = OB, i.e., ... \(rac{-c}{a}\) = \(rac{-c}{a}\) ⇒ \(rac{1}{a}\) = \(rac{1}{a}\) ⇒ | a | = | b |.

A particle moves along the curve `6y = x^3 + 2`. Find the points on the curve at which y-co-ordinate is changing 8 times as fast as the x-co-ordinate.

Description : A particle moves along the curve `6y = x^3 + 2`. Find the points on the curve at which y-co-ordinate is changing 8 times as fast as the x-co-ordinate.

Last Answer : A particle moves along the curve `6y = x^3 + 2`. Find the points on the curve at which y-co-ordinate is changing 8 times as fast as the x-co-ordinate.

A six co-ordinate complex has the formula `CoCl_(3).5NH_(3).H_(2)O`. Electrical coductance measurements indicate the presence of three ions in one for

Description : A six co-ordinate complex has the formula `CoCl_(3).5NH_(3).H_(2)O`. Electrical coductance measurements indicate the presence of three ions in one for

Last Answer : A six co-ordinate complex has the formula `CoCl_(3).5NH_(3).H_(2)O`. Electrical coductance measurements indicate the ... complex? A. 3 B. 2 C. 4 D. 1

Which of the following compounds has ionic bond. `pi-`bond, co-ordinate bond and covalent bond:-

Description : Which of the following compounds has ionic bond. `pi-`bond, co-ordinate bond and covalent bond:-

Last Answer : Which of the following compounds has ionic bond. `pi-`bond, co-ordinate bond and covalent bond:- A. `HNO_(2)` B. `NaNO_(3)` C. `KNO_(2)` D. `MgCl_(2)`

In a cartesian co-ordinate system, the coordinates of two points P and Q are (2, 4, 4) and (-2, -3, 7) respectively

Description : In a cartesian co-ordinate system, the coordinates of two points P and Q are (2, 4, 4) and (-2, -3, 7) respectively

Last Answer : In a cartesian co-ordinate system, the coordinates of two points P and Q are (2, 4, 4) ... find \(\overset\longrightarrow{PQ}\) and its magnitude.

In relation to the State Government, local government exercises : (1) Co-ordinate Authority (2) Delegated Authority (3) Superior Authority (4) Independent Authority

Description : In relation to the State Government, local government exercises : (1) Co-ordinate Authority (2) Delegated Authority (3) Superior Authority (4) Independent Authority

Last Answer : (2) Delegated Authority Explanation: In the Indian context, local government has only a derivative and not an independent authority. Its powers and functions are determined by the State Legislature. So among the given options, delegated authority is the most appropriate.

Mark the compound which posses ionic, covalent and co–ordinate bond:

Description : Mark the compound which posses ionic, covalent and co–ordinate bond:

Last Answer : NH4Cl

For a ternary mixture, in which equilateral triangular co-ordinate is used in leaching and extraction, a __________ of the equilateral triangular co-ordinates. (A) Binary mixture is represented by the apex (B) Binary mixture is represented by any point inside (C) Ternary mixture is represented by the sides (D) Pure component is represented by the apex

Description : For a ternary mixture, in which equilateral triangular co-ordinate is used in leaching and extraction, a __________ of the equilateral triangular co-ordinates. (A) Binary mixture is ... Ternary mixture is represented by the sides (D) Pure component is represented by the apex

Last Answer : (D) Pure component is represented by the apex

Co-ordinate coupling is an example of A. Single Degree of Freedom System B. Several Degree of Freedom System C. Two Degree of Freedom System D. None

Description : Co-ordinate coupling is an example of A. Single Degree of Freedom System B. Several Degree of Freedom System C. Two Degree of Freedom System D. None

Last Answer : C. Two Degree of Freedom System

The retailer is usually in an excellent position to 1. make the most profits in the channel 2. be the channel leader 3. gain feedback from consumers 4. co-ordinate the production strategy 5. none of these

Description : The retailer is usually in an excellent position to 1. make the most profits in the channel 2. be the channel leader 3. gain feedback from consumers 4. co-ordinate the production strategy 5. none of these

Last Answer : gain feedback from consumers

In isotropic turbulence, the __________ are equal to each other. (A) Temporal velocity components (B) Mean square of velocity fluctuations in the three co-ordinate directions (C) Root mean square of velocity fluctuations in the three co-ordinate directions (D) None of these

Description : In isotropic turbulence, the __________ are equal to each other. (A) Temporal velocity components (B) Mean square of velocity fluctuations in the three co-ordinate directions (C) Root mean square of velocity fluctuations in the three co-ordinate directions (D) None of these

Last Answer : (B) Mean square of velocity fluctuations in the three co-ordinate directions

The orthographical projection of a traverse leg upon the reference meridian, is known as (A) Departure of leg (B) Latitude to the leg (C) Co-ordinate of the leg (D) Bearing of the leg

Description : The orthographical projection of a traverse leg upon the reference meridian, is known as (A) Departure of leg (B) Latitude to the leg (C) Co-ordinate of the leg (D) Bearing of the leg

Last Answer : (B) Latitude to the leg

The co-ordinate of a point measured perpendicular to the parallel, is called (A) Total latitude (B) Meridian distance (C) Total departure (D) Consecutive co-ordinate

Description : The co-ordinate of a point measured perpendicular to the parallel, is called (A) Total latitude (B) Meridian distance (C) Total departure (D) Consecutive co-ordinate

Last Answer : (A) Total latitude

................ is the ability of multiple process to co-ordinate their activities by exchange of information A) Synchronization B) Mutual Exclusion C) Dead lock D) Starvation

Description : ................ is the ability of multiple process to co-ordinate their activities by exchange of information A) Synchronization B) Mutual Exclusion C) Dead lock D) Starvation

Last Answer : A) Synchronization

Marketing planning is a continuous process because A)marketing activities must parallel those of competitors. B)the time frame of plans must co -ordinate with the time frame of marketing controls. C)to have effective control, new control processes must be introduced. D)plans must be changed as forces in the marketing environment change. E)marketing managers tend to develop marketing myopia and focus on short -term plans.

Description : Marketing planning is a continuous process because A)marketing activities must parallel those of competitors. B)the time frame of plans must co -ordinate with the time frame of marketing controls. C ... change. E)marketing managers tend to develop marketing myopia and focus on short -term plans.

Last Answer : E)marketing managers tend to develop marketing myopia and focus on short -term plans.

The retailer is usually in an excellent position to A)make the most profits in the channel. B)be the channel leader. C)gain feedback from consumers. D)co -ordinate the production strategy.

Description : The retailer is usually in an excellent position to A)make the most profits in the channel. B)be the channel leader. C)gain feedback from consumers. D)co-ordinate the production strategy.

Last Answer : C)gain feedback from consumers.

Explain absolute and incremental co-ordinate systems, with suitable example.

Description : Explain absolute and incremental co-ordinate systems, with suitable example. 

Last Answer : 1. Absolute Co- ordinate system: In Cartesian co ordinate geometry system using absolute measurement. Each point is always specified using same zero of given co ordinate system as shown in fig. It is ... to the system as a distance increment, measured from preceding point. Example: