Build using minimum number of CMOS gates.

Build using minimum number of CMOS gates.

  1. Three input NAND gate.
  2. Two input NOR gate
  3. Three input NOR gate
  4. Two input AND gate
  5. Two input OR gate
by
recategorized

1 Answer

Answer :

  1. Three input NAND gate.
  2. Two input NOR gate
  3. Three input NOR gate
  4. Two input AND gate
  5. Two input OR gate
image
image
by

Related questions

Design Y=AB.CD using CMOS logic.

Description : Design Y=AB.CD using CMOS logic.

Last Answer : Y=AB.CD using CMOS logic

Draw CMOS inverter characteristic and explain it.

Description : Draw CMOS inverter characteristic and explain it.

Last Answer : Characteristics: The characteristics of CMOS inverter depend on the charging and discharging of the load capacitance CL through the PMOS and NMOS transistors respectively. The finite time taken for this charging ... pass from input to output High-to-low delay (tdf) Low-to-high delay (tdr)

Explain estimation of channel capacitance of CMOS.

Description : Explain estimation of channel capacitance of CMOS.

Last Answer : Capacitance estimation: The dynamic response i.e. switching speed of MOS system depends on capacitance associated with the MOS devices which are formed by different layers in MOS transistors ... are due to three dimensional, distributed charge voltage relations within the device structure. 

What are the advantages of CMOS over NMOS?

Description : What are the advantages of CMOS over NMOS?

Last Answer : Advantages of CMOS technology over NMOS are as follows. Very low static power consumption Reduce the complexity of the circuit High density of logic functions on a chip Low static power consumption High noise immunity

What are the advantages of using Linux?

Description : What are the advantages of using Linux?

Last Answer : Advantages of Linux are as follows :Linux is open source and free.Linux Is multiuser and multitasking operating system.Linux is the stable operating system.Linux is reliable.Linux can be modify according to requirements.Linux is the secure operating system.

Baby Gates

Description : Baby Gates

Last Answer : When it comes to taking care of your baby, his or her safety is always primary. While growing up, babies tend to become more curious of their environment, which is why they often enjoy ... baby gates. Look around and compare the different types before choosing one that will fit your needs.

How to Install Wooden Gates

Description : How to Install Wooden Gates

Last Answer : How to Install Wooden Gates A wooden gate can add a great deal of character to your home and yard. Wooden gates look better than metal gates and are often more secure. Here is a quick guide on how to install ... long planks down to match the gate's top and then nail it to the top of the gate's rail.

How to Write to Bill Gates

Description : How to Write to Bill Gates

Last Answer : How to Write to Bill Gates While there's a very slim chance that Bill Gates - one of the richest men in the world and the founder of Microsoft Corporation - will get to read your letter or e- ... yourself with the fact that you wrote a letter to one of the most influential people in the world today.

Which of the following gates can be used to realize all possible combinational logic functions?

Description : Which of the following gates can be used to realize all possible combinational logic functions?  (i) OR gate (ii) NOR gate (iii) Exclusive OR gate (iv) NAND gate (v) AND gate  (A) (iii), (iv) and (v)  (B) (i), (iii) and (iv)  (C) (ii) and (iv)  (D) (i) and (v)

Last Answer : Which of the following gates can be used to realize all possible combinational logic functions?  (i) OR gate (ii) NOR gate (iii) Exclusive OR gate (iv) NAND gate (v) AND gate  (A) (iii), (iv) and (v)  (B) (i), (iii) and (iv)  (C) (ii) and (iv)  (D) (i) and (v)

The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse

Description : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Last Answer : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current

Description : A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current requirement is 0.2 A. The minimum voltage at input is 24 V. What is the required value of series resistance with source? A) 5.45 Ω B) 6 Ω C) 7.2 Ω D) 6.38 Ω  

Last Answer : A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current requirement is 0.2 A. The minimum voltage at input is 24 V. What is the required value of series resistance with source? A) 5.45 Ω B) 6 Ω C) 7.2 Ω D) 6.38 Ω  

In an R-C phase shift oscillator, the minimum no. of R-C networks to be connected in cascade will be -

Description : In an R-C phase shift oscillator, the minimum no. of R-C networks to be connected in cascade will be -

Last Answer : In an R-C phase shift oscillator, the minimum no. of R-C networks to be connected in cascade will be 3

For optimum generator scheduling for different power plants, the minimum fuel cost is obtained when

Description : For optimum generator scheduling for different power plants, the minimum fuel cost is obtained when

Last Answer : For optimum generator scheduling for different power plants, the minimum fuel cost is obtained when The incremental fuel cost of each plant multiplied by the penalty factor is the same

Which of the following circuit breakers has high reliability & minimum maintenance?

Description : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB 

Last Answer : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB 

The Minimum Oil Circuit Breaker (MOCB) is named because of :

Description : The Minimum Oil Circuit Breaker (MOCB) is named because of :  (A) Reduced requirement of oil (B) Reduced requirement of air (C) All of the above (D) None of the above

Last Answer : The Minimum Oil Circuit Breaker (MOCB) is named because of : Reduced requirement of oil 

A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are :

Description : A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are :  (A) less than 66 kV (B) lie between 66 kV and 110 kV (C) more than 165 kV (D) lie between 110 kV and 165 kV

Last Answer : A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are : lie between 66 kV and 110 kV

ln a minimum oil circuit breaker the oil is used

Description : ln a minimum oil circuit breaker the oil is used

Last Answer : ln a minimum oil circuit breaker the oil is used to act as circuit breaking medium only

The minimum charge on an ion is?

Description : The minimum charge on an ion is?

Last Answer : The minimum charge on an ion is equal to the charge of an electron.

Minimum voltage regulation occurs when the power factor of the load is?

Description : Minimum voltage regulation occurs when the power factor of the load is?

Last Answer : Minimum voltage regulation occurs when the power factor of the load is leading.

what is the minimum voltage required to turn on a diode ?

Description : what is the minimum voltage required to turn on a diode ?

Last Answer : 0.7 v sil and 0.3 v for gr

Draw & explain touch plate switch using IC555.

Description : Draw & explain touch plate switch using IC555.

Last Answer : It is construct form monostable multivibrator , when metal plates touch by finger then voltage at pin number 2 goes to below 1/3 Vcc then output of lower comparator becomes high hence flip flop set and ... then output of timer goes low and it low till up to the metal plates touch by finger .

Sinusoidal Steady-State Analysis - Using nodal analysis, find node voltages in the circuit.

Description : Sinusoidal Steady-State Analysis - Using nodal analysis, find node voltages in the circuit.

Last Answer : Sinusoidal Steady-State Analysis - Using nodal analysis, find node voltages in the circuit.

A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Description : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Last Answer : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Using phasors, determine in the following equations

Description : Using phasors, determine in the following equations

Last Answer : Using phasors, determine in the following equations

Find current through resistor using nodal analysis

Description : Find current through resistor using nodal analysis

Last Answer : Find current through resistor using nodal analysis

Logic Simplification Using Boolean Algebra

Description : Logic Simplification Using Boolean Algebra

Last Answer : Logic Simplification Using Boolean Algebra 1 : https://youtu.be/fuoSMm2dJMc Logic Simplification Using Boolean Algebra 2 : https://youtu.be/bfCdur2QcJ4 Logic Simplification Using Boolean Algebra 3 : ... .be/V02wz8gz1UU Logic Simplification Using Boolean Algebra 7 : https://youtu.be/rgnJKgFO-SU

The disc of an instrument using eddy current damping should be of?

Last Answer : The disc of an instrument using eddy current damping should be of conducting and non-magnetic material.

The speed of a universal motor is generally reduced by using?

Last Answer : The speed of a universal motor is generally reduced by using gear trains.

can we turn off thyristor using Gate?

Last Answer : No we cannot turn off normal thyristor using Gate.

What number is your Willpower?

Description : What number is your Willpower?

Last Answer : 10 but then I cheated so I don’t know… but I’m being honest about it so 10 or am I lying again… so definitely between 1 and 10

What is the choice of size and number of generator units in interconnected power system?

Description : What is the choice of size and number of generator units in interconnected power system?

Last Answer : Choice of Size and Number of Generating Units: 1. The size/rating and number of generating units in such way that they approximately match with the load curve as closely as possible. 2. In ... , if power plant is connected to grid system then generating unit of higher capacity can be installed.

The number of loop equations required to completely analysing a network comprising of 8 independent

Description :  The number of loop equations required to completely analysing a network comprising of 8 independent branches and 6 nodes including the reference node shall be A) 3 B) 2 C) 4 D) 5 

Last Answer :  The number of loop equations required to completely analysing a network comprising of 8 independent branches and 6 nodes including the reference node shall be 3 

A connected graph has ‘5’ number of branches and ‘4’ number of nodes. It's rank is

Description :  A connected graph has ‘5’ number of branches and ‘4’ number of nodes. It's rank is A) 1 B) 2 C) 3 D) 4 

Last Answer :  A connected graph has ‘5’ number of branches and ‘4’ number of nodes. It's rank is 3 

Then number of T-states of the instruction STA in 8085 microprocessor is

Description : Then number of T-states of the instruction STA in 8085 microprocessor is A) 10 B) 12 C) 13 D) 16 

Last Answer : Then number of T-states of the instruction STA in 8085 microprocessor is 13 

The number of terminals present in IGBT is

Description : The number of terminals present in IGBT is A) 2 B) 3 C) 4 D) 5

Last Answer : The number of terminals present in IGBT is 3

Increasing the number of turns of wire on the secondary of a transformer will

Description : Increasing the number of turns of wire on the secondary of a transformer will  (A) Decrease the secondary current (B) Increase the primary current (C) Have no effect on the secondary current (D) Increase the secondary current

Last Answer : Increasing the number of turns of wire on the secondary of a transformer will Decrease the secondary current 

What is the Gray code word for the binary number 101011?

Description : What is the Gray code word for the binary number 101011?  (1) 101011 (2) 110101 (3) 011111 (4) 111110

Last Answer : What is the Gray code word for the binary number 101011?  (1) 101011 (2) 110101 (3) 011111 (4) 111110

The number of poles of 8/6 stepper motor can be :

Description : The number of poles of 8/6 stepper motor can be :

Last Answer : The number of poles of 8/6 stepper motor can be : 4

lt the length, number of turns and area of a coil are doubled, the inductance of the coil

Description : lt the length, number of turns and area of a coil are  doubled, the inductance of the coil

Last Answer : lt the length, number of turns and area of a coil are  doubled, the inductance of the coil is quadrupled

The number of independent equations to solve a network is equal to?

Description : The number of independent equations to solve a network is equal to?

Last Answer : The number of independent equations to solve a network is equal to the number of chords.

The number of electrons in the outer most orbit of carbon atom is?

Description : The number of electrons in the outer most orbit of carbon atom is?

Last Answer : The number of electrons in the outer most orbit of carbon atom is 4.

A number of forces acting at a point will be in equilibrium if?

Description : A number of forces acting at a point will be in equilibrium if?

Last Answer : The sum of the resolved parts in any two perpendicular directions are both zero

The number of brushes in a commutator depends on?

Last Answer : The number of brushes in a commutator depends on amount of current to be collected.

In lap winding, the number of brushes is always?

Last Answer : In lap winding, the number of brushes is always same as the number of poles.

What is the maximum number of circuit breakers in a panel?

Description : What is the maximum number of circuit breakers in a panel?

Last Answer : It depends on that which type of panel is this.

What are the number of valence electrons of atoms in semiconductor?

Description : What are the number of valence electrons of atoms in semiconductor?

Last Answer : There are four valence electrons in the atom of a semiconductor.

How To Make Instructions On How To Build An Ant Farm

Description : How To Make Instructions On How To Build An Ant Farm

Last Answer : Making an ant farm for your children is an excellent way to hold their attention for hours and is a good educational tool as well. They can teach children the importance of an eco system as well ... have more fun with your ants, you can add minuture trees or tiny farmhouses found at hobby stores.

How To Build Hover Shoes

Description : How To Build Hover Shoes

Last Answer : What You’ll Need: A glue gun Four 50 pound weight magnets Wire cutters wire solder Two 9 volt batteries 2 rocker switches soldering irons an old pair of shoes

How to Build Self-Esteem

Description : How to Build Self-Esteem

Last Answer : How to Build Self-Esteem Youth is the most important part of one's life. During this period we start to see things in a different light. This is the point in life when we start to ... demanding they will become. Don't criticize yourself too much for your failures. Avoid the company of pessimists.

How to Build Secret Compartments

Description : How to Build Secret Compartments

Last Answer : How to Build Secret Compartments Have you ever played hide and seek wished you could hide in a secret portion of the cupboard? Have you ever wanted to hide a secret treasure in a place where no one ... Now you can use your hard cover book to store money, treasures, secret coins, or other mementos!