What's is the self excited dc motor?

by

1 Answer

Answer :

Self excited Dc motor have same source of power to armature and field winding
by
by
Give me more some example plz

Related questions

A separately excited dc motor operating in first quadrant is fed from 3-phase semi -converter free -wheeling

Description : A separately excited dc motor operating in first quadrant is fed from 3-phase semi -converter free -wheeling diode is open circuited, then the motor :  (A) can be operated in first quadrant (B) ... in first & second quadrants (C) can be operated in first & fourth quadrants (D) cannot be operated

Last Answer : A separately excited dc motor operating in first quadrant is fed from 3-phase semi -converter free -wheeling diode is open circuited, then the motor : can be operated in first & fourth quadrants

A separately excited dc motor is required to be controlled, from a 3-phase supply, for its operation in the first...

Description : A separately excited dc motor is required to be controlled, from a 3-phase supply, for its operation in the first quadrant only. The most preferred converter would be  (a) 3-phase fully controlled ... converter with free wheel diode (c) 3-phase dual converter (d) 3-phase half wave converter 

Last Answer : A

What is the difference between self-excited and separately excited DC generator?

Description : What is the difference between self-excited and separately excited DC generator? 

Last Answer : Self-excited generator: In a self-excited generator the field winding is excited by an external DC source like a battery etc. Separately excited generator: In a separately excited generator the field poles ... is again fed to the field winding and goes on till the generator builds up voltage. 

The slight curvature at the lower end of the O.C.C. of a self-excited dc generator is due to

Description : The slight curvature at the lower end of the O.C.C. of a self-excited dc generator is due to  1. residual pole flux 2. high armature speed 3.magnetic inertia 4. high field circuit resistance

Last Answer : The slight curvature at the lower end of the O.C.C. of a self-excited dc generator is due to magnetic inertia

On some diesel-electric ships, the DC propulsion motor will only attain half speed when the generator fields are fully excited. Speeds above this are obtained by _____________. A. rotating brush alignment B. raising the generator engine speed C. lowering the generator engine speed D. decreasing excitation

Description : On some diesel-electric ships, the DC propulsion motor will only attain half speed when the generator fields are fully excited. Speeds above this are obtained by _____________. A. rotating brush ... B. raising the generator engine speed C. lowering the generator engine speed D. decreasing excitation

Last Answer : Answer: B

A single-phase half-controlled rectifier is driving a separately excited dc motor. The dc motor has a back emf

Description : A single-phase half-controlled rectifier is driving a separately excited dc motor. The dc motor has a back emf constant of 0.5 V/rpm. The armature current is 5 A without any ripple. The armature resistance is 2 Ohm. The ... of the motor will be  (A) 339 rpm (B) 359 rpm (C) 366 rpm (D) 386 rpm

Last Answer : 359

A DC chopper is used for regenerative braking of a separately excited DC motor. The DC supply

Description : A DC chopper is used for regenerative braking of a separately excited DC motor. The DC supply voltage is 400V. The armature current during regenerative braking is kept constant at 300 A with negligible ripple. For a duty cycle of 60% ... to the DC supply is  (a) 78 kW (b) 58 kW (c) 38 kW (d) 48 kW

Last Answer : 48

The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a

Description : The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a firing delay angle, α and flux, Φ (A) directly proportional to α and Φ (B) ... proportional to α and inversely proportional to Φ (D) directly proportional to Φ and inversely proportional to α

Last Answer : The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a firing delay angle, α and flux, Φ directly proportional to α and inversely proportional to Φ

Separately Excited DC motor

Description : Separately Excited DC motor

Last Answer : Separately Excited DC motor

The supply both to field and armature circuits are disconnected simultaneously in a separately excited dc...

Description : The supply both to field and armature circuits are disconnected simultaneously in a separately excited dc motor and it comes to a standstill in 5 sec. If the armature circuit of this motor is disconnected from supply with field ... rest in (1) 5 sec (2) 7 sec (3) 4 sec (4) A very long time  

Last Answer : 5 sec only.standstill time doesn't depend upon field excitation

A hysteresis motor (A) is not a self-starting motor. (B) is a constant speed motor. (C) needs dc excitation. (D) can not be run in reverse speed.

Description : A hysteresis motor (A) is not a self-starting motor. (B) is a constant speed motor. (C) needs dc excitation. (D) can not be run in reverse speed.

Last Answer : (B) is a constant speed motor

As shown in the illustration, the generator field is excited with DC current provided by ____________. EL-0016 A. conductors '1', '2' and '3' B. inductor 'L1' C. rectifier 'CR1' D. winding 'S-2'

Description : As shown in the illustration, the generator field is excited with DC current provided by ____________. EL-0016 A. conductors '1', '2' and '3' B. inductor 'L1' C. rectifier 'CR1' D. winding 'S-2'

Last Answer : Answer: C

Induction generator is self excited machine. a) True b) False

Description : Induction generator is self excited machine. a) True b) False

Last Answer : Ans: B

A separately excited generator as compared to a self-excited generator (a) is amenable to better voltage con-trol (b) is more stable (c) has exciting current independent of load current (d) has all above features

Description : A separately excited generator as compared to a self-excited generator (a) is amenable to better voltage con-trol (b) is more stable (c) has exciting current independent of load current (d) has all above features

Last Answer : Ans: d

for the voltage built-up a self-excited D.C. generator, which of the following is not an essential

Description : for the voltage built-up a self-excited D.C. generator, which of the following is not an essential condition.  1.there must be some residual flux  2.field winding mmf must aid the residual ... 3.total field circuit resistance must be less than t critical value  4.armature speed must be very high

Last Answer : for the voltage built-up a self-excited D.C. generator, which of the following is not an essential condition.  1.there must be some residual flux  2.field winding mmf must aid the ... .total field circuit resistance must be less than t critical value  4.armature speed must be very high

A separately excited generator as compared to a self-excited generator?

Last Answer : A separately excited generator as compared to a self-excited generator is amenable to better voltage control, more stable, has exciting current independent of load current.

The basic type of D.C. motor speed control where a generator armature directly feeds the motor armature and the motor and generator fields are excited by a separate D.C. source is called ___________________. A. Burmeister-Wain B. Ward-Leonard C. Sperry-Rand D. Atlas-Copco

Description : The basic type of D.C. motor speed control where a generator armature directly feeds the motor armature and the motor and generator fields are excited by a separate D.C. source is called ___________________. A. Burmeister-Wain B. Ward-Leonard C. Sperry-Rand D. Atlas-Copco

Last Answer : Answer: B

An a.c. tachometer is just a ________with one phase excited from the carrier frequency. (A) two-phase A.C. servomotor (B) two-phase induction motor (C) A.C. operated universal motor (D) hybrid stepper motor.

Description : An a.c. tachometer is just a ________with one phase excited from the carrier frequency. (A) two-phase A.C. servomotor (B) two-phase induction motor (C) A.C. operated universal motor (D) hybrid stepper motor.

Last Answer : Ans: D This is a special purpose machine whose stator coil can be energized by electronically switched current.

The stator of a 415V, 50 Hz, 4-pole slip ring Induction Motor is excited by rated frequency with slip rings open

Description : The stator of a 415V, 50 Hz, 4-pole slip ring Induction Motor is excited by rated frequency with slip rings open circuited. The rotor is made to rotate at a speed of 600 rpm in the opposite direction to the ... frequency of induced voltage across slip ring is A) 30 Hz B) 70 Hz C) 20 Hz D) 35 Hz

Last Answer : The stator of a 415V, 50 Hz, 4-pole slip ring Induction Motor is excited by rated frequency with slip rings open circuited. The rotor is made to rotate at a speed of 600 rpm in the opposite direction to the normal direction, The frequency of induced voltage across slip ring is 70 Hz

A separately excited d.c. motor fed from single phase full converter with firing angle 60° runs at 1000 r.p.m.

Description : A separately excited d.c. motor fed from single phase full converter with firing angle 60° runs at 1000 r.p.m. If motor is connected to single phase semiconverter with the same firing angle of 60°, it would run at (a) 2000 rpm (b) 1850 rpm (c) 1500 rpm (d) 1000 rpm 

Last Answer : Ans =1500

A single-phase induction motor with only the main winding excited would exhibit the following response at

Description : A single-phase induction motor with only the main winding excited would exhibit the following response at synchronous speed  (A) Rotor current is zero (B) Rotor current is non-zero and is ... and backward rotating fields are equal (D) Forward rotating field is more than the backward rotating field

Last Answer : A single-phase induction motor with only the main winding excited would exhibit the following response at synchronous speed  (A) Rotor current is zero (B) Rotor current is non-zero and is ... backward rotating fields are equal (D) Forward rotating field is more than the backward rotating field

An over excited synchronous motor on noload is known as?

Last Answer : An over excited synchronous motor on noload is known as synchronous condenser.

If the load of the normally excited synchronous motor is increased the power factor will?

Description : If the load of the normally excited synchronous motor is increased the power factor will?

Last Answer : If the load of the normally excited synchronous motor is increased the power factor will become lagging.

If the field of synchronous motor is under excited, power factor will be?

Description : If the field of synchronous motor is under excited, power factor will be?

Last Answer : If the field of synchronous motor is under excited, power factor will be lagging.

what is separately excited motor ?

Description : what is separately excited motor ?

Last Answer : the field winding have different source power supply and armature have different power supply source

Application of DC Series Motor

Description : Application of DC Series Motor

Last Answer : 1. Electric traction 2. Cranes, 3. Passenger elevators, 4. Continuous conveyors, 5. Grinders, 6. Polishers,

If field current is decreased in shunt dc motor, the speed of the motor

Description : If field current is decreased in shunt dc motor, the speed of the motor (a) remains same. (b) increases. (c) decreases. (d) none of the above.

Last Answer : increases

What would happen if a DC motor was supplied with AC ?

Description : What would happen if a DC motor was supplied with AC ?

Last Answer : With three phase induction motor, humming and not rotate, but if single phase universal motor like air blower, home mixture, motor run on constant speed..speed variation not possible...

State the function of following parts of DC motor : i) Yoke ii) Poles iii) Field winding iv) Commutator.

Description : State the function of following parts of DC motor : i) Yoke ii) Poles iii) Field winding iv) Commutator. 

Last Answer : Function : i) Yoke: The yoke serves the following two purposes. i) It supports the other components such as poles and provides mechanical protection for whole machine. ii) It forms a part of ... one pole to another and thus to help the motor to develop a continuous and unidirectional torque  

DC series motor should never be started at no-load. Justify.

Description : DC series motor should never be started at no-load. Justify. 

Last Answer : At no load the field current (which is also the armature current) is very small and hence the useful air-gap field flux. Also the torque is very small.  As N ∝ 1/Ф the speed rises to ... on the rotating parts they may get damaged. Hence DC series motor should never be started on no-load.

With the help of neat diagrams,explain the following methods of speed control in DC series motor. i) Field diverter method. ii) Armature diverter method.

Description : With the help of neat diagrams,explain the following methods of speed control in DC series motor. i) Field diverter method. ii) Armature diverter method.

Last Answer : (i) Field diverter method: - Resistance connected in parallel with field winding -By adjusting this resistance current can by diverted from field winding -Thus field current decreases and the speed can be ... decreased, the flux must increase and hence speed is decreased than the rated speed.

What is back emf in DC motor? Explain its significance.

Last Answer : Back emf: When the armature of DC motor rotates under the fixed magnetic field and cuts it, by Faraday's law an emf is induced in them. The induced emf acts in opposite direction to the ... the flow of armature current i.e. it automatically changes the armature current to meet load requirements. 

State the principle of operation of a dc motor.

Last Answer : Principle of operation of a dc motor: When a current carrying conductor is placed in a magnetic field, the conductor experiences the mechanical force. The magnitude of force is given by  F = BIL newton  where F – Force , B – Maximum flux density , I – Current , L – Active length of conductor

Give the two functions of yoke in DC motor.

Description : Give the two functions of yoke in DC motor. 

Last Answer : Functions of yoke in DC motor: 1) Provides mechanical support for poles. 2) Acts as protecting cover for machine. 3) Provides path for magnetic flux.

State any two applications of brushless DC motor.

Description : State any two applications of brushless DC motor. 

Last Answer : 1) Synthetic fibre drawing works.  2) Turn table drives in record players.  3) Spindle drives in hard disk circuits.  4) Computer peripheral equipments as plotters etc. 5) Gyroscope motors.  6) Biomedical machines as heart pumps. 

With the help of necessary sketch, explain in brief the working of brushless DC motor.

Description : With the help of necessary sketch, explain in brief the working of brushless DC motor. 

Last Answer : Constructional Diagram of Brushless DC Motor: Working of brushless DC motor: The brushless DC motor is the combination of a permanent excited synchronous motor and a frequency ... Suitable PWM techniques allow regenerative breaking, which increases dynamic and efficiency of the drive. 

List the various losses on a DC Motor.

Description : List the various losses on a DC Motor. 

Last Answer : The various losses on a DC Motor: 1) Winding losses (Copper losses): i) Armature winding losses ii) Shunt field losses iii) Series field losses 2) Core losses (iron losses): 3) Brush contact losses: 4) Windage and frictional (Mechanical losses):

In a DC motor, it is important to place the brushes along ______

Description : In a DC motor, it is important to place the brushes along ______ A) Magnetic Neutral Axis B) Normal Geometric Axis C) Nominal Geometric Axis D) None of these

Last Answer : In a DC motor, it is important to place the brushes along Magnetic Neutral Axis

In a 4-pole wave winding connected dc motor, the cross-magnetizing AT/pole for a brush shift of θ radians

Description : In a 4-pole wave winding connected dc motor, the cross-magnetizing AT/pole for a brush shift of θ radians (A) Armature amp-conductors × (θ/360o) (B) Armature amp-turns × (θ/360o) (C) Armature amp-conductors × (1/4 - θ/360o) (D) Armature amp-conductors × (1/8 - θ/360o)

Last Answer : In a 4-pole wave winding connected dc motor, the cross-magnetizing AT/pole for a brush shift of θ radians Armature amp-conductors × (1/8 - θ/360o)

In a differentially compounded dc motor

Description : In a differentially compounded dc motor (A) the speed is constant as the torque increases (B) the speed falls non-linearly as the torque increases (C) the speed increases non-linearly as the torque increases (D) the flux increases as the load increases

Last Answer : In a differentially compounded dc motor the speed increases non-linearly as the torque increases

A large dc motor is required to control the speed of the blower from a 3 -phase ac source. The suitable ac to ...

Description : A large dc motor is required to control the speed of the blower from a 3 -phase ac source. The suitable ac to dc converter is, 3 -phase (a) Fully controlled bridge converter ( ... bridge converter with freewheeling diode (c) Half controlled bridge converter (d) Converter pair in sequence control

Last Answer : a fullu control

The dc motor used for intermittent high torque loads is

Description : The dc motor used for intermittent high torque loads is  (1) dc series motor (2) dc shunt motor (3) differential compound motor (4) cumulative compound motor

Last Answer : 4 cumulative compound motor

A cumulative dc compound motor runs at 1500 rpm. on full load. If its series field is short-circuited, its speed

Description : A cumulative dc compound motor runs at 1500 rpm. on full load. If its series field is short-circuited, its speed  (1) becomes zero (2) remains unchanged (3) increases (4) decreases

Last Answer : Increases. As it's cumulative compound motor, both series and shunt field both assist each other. If series field is short circuited, the overall field strength will decrease and atop of that ... speed is inversely proportional to field strength.  So, the speed will increase overall.

Armature shunting method of speed control of dc shunt motor is preferred over annature resistance method...

Description : Armature shunting method of speed control of dc shunt motor is preferred over annature resistance method due to:  (1) Better speed regulation (2) Less loss in external resistance (3) Simplicity in control circuit (4) Reduced cost of controller

Last Answer : Armature shunting method of speed control of dc shunt motor is preferred over annature resistance method due to: Better speed regulation.

What is the order of the characteristic equation of an armature controlled DC motor?

Description : What is the order of the characteristic equation of an armature controlled DC motor?  (A) First order equation (B) Second order equation (C) Zero order equation (D) Third order equation 

Last Answer : third order

Why a dc series motor has a high starting torque?

Description : Why a dc series motor has a high starting torque?

Last Answer : motor

What is the principle of DC motor?

Description : What is the principle of DC motor?

Last Answer : principle

Use of dc motor

Last Answer : There are three types of self excited DC motor 1. series wound 2. shunt wound 3, compound wound 1.Applications of DC series motor are : DC ... DC compound motor is use for punches. These are some applications of DC compound motor.

Why a single phase motor is not a self starting motor?

Description : Why a single phase motor is not a self starting motor

Last Answer : The motor mechanical degree 360 degree this must covered revolving field so single phase to starting need starting winding with 90 degree to main winding