Effect of a force on a body depends upon?

by

2 Answers

Answer :

Effect of a force on a body depends upon magnitude, direction, position or line of action.

by

Answer :

MAGNITUDE
by

Related questions

A force acting on a body may?

Description : A force acting on a body may?

Last Answer : A force acting on a body may introduce internal stresses, balance the other forces acting on it, retard its motion, change its motion.

When does the Body bias effect occur in an n-channel MOSFET?

Description : When does the Body bias effect occur in an n-channel MOSFET?  A) When the Source voltage is less the Bulk voltage B) When the Source voltage is equal to or greater the Bulk voltage C) When the Drain voltage is equal to the Bulk voltage D) When the Gate voltage is equal to the Bulk Voltage 

Last Answer : When does the Body bias effect occur in an n-channel MOSFET?  A) When the Source voltage is less the Bulk voltage B) When the Source voltage is equal to or greater the Bulk voltage C) ... voltage is equal to the Bulk voltage D) When the Gate voltage is equal to the Bulk Voltage 

A single force and a couple acting in the same plane upon a rigid body?

Description : A single force and a couple acting in the same plane upon a rigid body?

Last Answer : A single force and a couple acting in the same plane upon a rigid body cannot balance each other.

Limiting force of friction is the?

Description : Limiting force of friction is the?

Last Answer : Limiting force of friction is the friction force acting when the body is just about to move.

Frictional force encountered after commencement of motion is called?

Description : Frictional force encountered after commencement of motion is called?

Last Answer : Frictional force encountered after commencement of motion is called dynamic friction.

On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be?

Description : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be?

Last Answer : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be zero at its upper end.

On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be?

Description : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be?

Last Answer : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be upwards at its upper end.

The product of either force of couple with the arm of the couple is called?

Description : The product of either force of couple with the arm of the couple is called?

Last Answer : The product of either force of couple with the arm of the couple is called moment of the couple.

A force is completely defined when we specify?

Description : A force is completely defined when we specify?

Last Answer : A force is completely defined when we specify magnitude, direction, point of application.

The unit of force in S.I. units is

Description : The unit of force in S.I. units is

Last Answer : The unit of force in S.I. units is Newton.

If a suspended body is struck at the center of percussion, then the pressure on...

Description : If a suspended body is struck at the center of percussion, then the pressure on die axis passing through the point of suspension will be?

Last Answer : If a suspended body is struck at the center of percussion, then the pressure on die axis passing through the point of suspension will be zero.

If a rigid body is in equilibrium under the action of three forces, then?

Description : If a rigid body is in equilibrium under the action of three forces, then?

Last Answer : If a rigid body is in equilibrium under the action of three forces, then the lines of action of these forces meet in a point, the lines of action of these forces are parallel.

The weight of a body is due to?

Description : The weight of a body is due to

Last Answer : The weight of a body is due to gravitational force of attraction towards the center of the earth.

Can an obligation be voluntary or is it forced upon an unwilling person?

Description : Can an obligation be voluntary or is it forced upon an unwilling person?

Last Answer : I’ve held voluntary leadership positions in associations, and I had obligations. In fact, service on the Board of Directors entails legal duties and obligations. I’m not quite sure if this is the tack you’re taking on this . . . but it’s the truth ;-)

Why do people use the word force, when what they are talking about is not force?

Description : Why do people use the word force, when what they are talking about is not force?

Last Answer : You can, of course, be forced into something through threat of sanction, no shooty bang bang there.

In the End of "Return of The Jedi" why didn't "Princess Leia" see the same force impressions of Yoda, Obi-wan, and Anakin, as Luke did?

Description : In the End of "Return of The Jedi" why didn't "Princess Leia" see the same force impressions of Yoda, Obi-wan, and Anakin, as Luke did?

Last Answer : It’s a guy thing…

What does applying a Force do?

Description : What does applying a Force do? 

Last Answer : Force causes acceleration Newton's Second Law states that: the acceleration (a) of an object is directly proportional to the force (F) applied, and inversely proportional the object's mass (m). ... object, the greater the acceleration. And, the more mass the object has, the lower the acceleration.

What is Force?

Description : What is Force?

Last Answer : We define Force as: 1) Force is a push or pull. 2) Force is the capacity to do work or cause physical change. 3) Force= Mass times acceleration (F = ma) 4) A force is that ... force acting on an object. 10 Newtons, downwards is a complete description of the force acting upon an object.

State principle of transmissibility of force.

Description : State principle of transmissibility of force.

Last Answer : Principle of Transmissibility of Force: It states that if a force acts at a point on a rigid body, it is assumed to act at any other point on the line of action of force within the same body. 

Define force and state its effects.

Description : Define force and state its effects.

Last Answer : Force: It is an external agency either push or pull which changes or tends to change the state of rest or of uniform motion of a body, upon which it acts. Effects of force : i) It may change the state ... It may turn or rotate the body on which it acts. iv) It may deform the body on which it acts.

State characteristics of force.

Description : State characteristics of force.

Last Answer : i) Magnitude: The quantity of force e.g. 10 N, 100 kN etc.  ii) Direction: It is the line along which the force acts. It is also called as line of action of the force.  iii) Point of ... .  Push: If the arrow head is pointed towards the point of application, the nature of the force is push.

Magnetomotive force formula

Description : Magnetomotive force formula

Last Answer : Magnetomotive force formula

Define magnetic lines of force. Also draw and show magnetic lines of force of a bar type magnet.

Description : Define magnetic lines of force. Also draw and show magnetic lines of force of a bar type magnet.

Last Answer : Magnetic Lines of force- These are the imaginary lines (having no physical existence) introduced by Faraday for the pictorial representation of the distribution of a magnetic field.  OR  A line of ... that the tangent at any point gives direction of the resultant force at that point. 

Define magnetic lines of force. Show the magnetic lines of force for bar type magnet.

Description : Define magnetic lines of force. Show the magnetic lines of force for bar type magnet.

Last Answer : Magnetic linens of force is the imaginary lines for magnetic field of magnet around it. These magnetic lines of forces are introduced by Michael Faraday. The direction of lines of force is from N-pole to S-pole. The figure shows lines of force for bar type magnet.

Which of the following is the name given to the lines of electric force which move so that its beginning traces

Description : Which of the following is the name given to the lines of electric force which move so that its beginning traces a closed curve on a positive surface and its end traces a corresponding closed curve on the negative surface? A) Tube of surface B) Tube of lines C) Tube of force D) Tube of electricity

Last Answer : Which of the following is the name given to the lines of electric force which move so that its beginning traces a closed curve on a positive surface and its end traces a corresponding closed curve on the negative ... A) Tube of surface B) Tube of lines C) Tube of force D) Tube of electricity

A field of force can exist only between?

Description : A field of force can exist only between?

Last Answer : A field of force can exist only between two ions.

How could I get a flashing effect for video wallpaper?

Description : How could I get a flashing effect for video wallpaper?

Last Answer : The picture is hidden behind a login form, could you put it on, say, imageshack.us?

How Does Obesity Effect Diabetes ?

Description : How Does Obesity Effect Diabetes ?

Last Answer : How Does Obesity Effect Diabetes Obesity and diabetes are two diseases that are cause for serious concern among many Americans. Every year, more and more overweight and obese people run the risk of developing ... , you can win the battle against obesity, and save your own life at the same time.

Piezo-electric effect

Description : Piezo-electric effect

Last Answer : Piezoelectric Effect is the ability of certain materials to generate an electric charge in response to applied mechanical stress. The word Piezoelectric is derived from the Greek piezein, which means to squeeze or ... Storage Temperature Range: -55 to + 125°C Insulation Resistance: 500 M ohms

State the disadvantages of skin effect.

Description :  State the disadvantages of skin effect.

Last Answer : Disadvantages of skin effect:- 1. Full cross section of conductor is not utilized, Therefore effective area of conductor reduces so its resistance increases. 2. Due to increase in resistance, copper ... increases (Since Voltage drop = IR ) 5. So voltage regulation becomes poor (increases) 

State the meaning of ferranti effect and proximity effect.

Description : State the meaning of ferranti effect and proximity effect.  

Last Answer : i) Ferranti effect : When long distance transmission is lightly loaded or there is no load condition than it is observe that receiving end voltage (VR) is found to be greater than sending end ... on conductor causes current in each conductor is re-distributed. This is known as proximity effect.

State the meaning of skin effect and how can it be minimised.

Description : State the meaning of skin effect and how can it be minimised. 

Last Answer : Meaning of skin effect :  When alternating current flows through conductor it has tendency to flow away from center of conductor. i.e. maximum current density is near skin of conductor and goes on ... whenever possible as Skin effect is absent (Since frequency 0) instead of A.C. supply.  

Define armature reaction in an alternator. Explain the effect of armature reaction at various P.F. of loads of alternator.

Description : Define armature reaction in an alternator. Explain the effect of armature reaction at various P.F. of loads of alternator.

Last Answer : Armature Reaction: The effect of armature flux on main flux is called as armature reaction.  Armature Reaction at Various Power Factors: When armature is loaded, the armature flux modifies ... lagging p.f. For capacitive loads the effect of flux is partly distorting and partly strengthening.

List out factors affecting proximity effect.

Description : List out factors affecting proximity effect. 

Last Answer : Factors affecting proximity effect: 1. Conductor size (diameter of conductor) 2. Frequency of supply current. 3. Distance between conductors. 4. Permeability of conductor material 

Analyze the effect of supply voltage on performance of LED as regards current, Lumen output, efficacy and life.

Description : Analyze the effect of supply voltage on performance of LED as regards current, Lumen output, efficacy and life. 

Last Answer : 1) Effect on Current:- In LED current depends upon supply voltage, if voltage get changes then current also change but this change in current will be control by resistors which are connected in series.  2) ...   4) Effect on Life:- If supply voltage is not stable then life of LED get reduced. 

With the help of N-channel JFET describe the effect of input voltage VGS on output current ID.

Description : With the help of N-channel JFET describe the effect of input voltage VGS on output current ID.

Last Answer : Working of N channel FET: * When a voltage is applied between the drain and source with a DC supply (VDD), the electrons flows from source to drain through narrow channel ... where the channel gets completely blocked and the drain current becomes zero is called pinch- off voltage. 

Under Following conditions Ferranti effect occurs:

Description : Under Following conditions Ferranti effect occurs: 

Last Answer : Under Following conditions Ferranti effect occurs:  1. When there is no load on transmission line (IL = 0) 2. When There is no load at receiving sub-station or Lightly loaded 3. When ... VR) is found to be greater than sending end voltage (VS). This phenomenon is known as Ferranti effect.

Explain in brief ‘Hall effect sensor’.

Description : Explain in brief ‘Hall effect sensor’. 

Last Answer : Working: * Working principle of a Hall effect sensor is that if strip of conducting material carries a current in presence of transverse magnetic field as shown fig . * The difference of ... with Hall strip. * When a transverse magnetic field passes through the strip, the voltage difference 

What is corona effect

Last Answer : The phenomenon of ionization of surrounding air around the conductor due to which luminous glow with hissing noise is rise is known as the corona effect.

State seeback effect. Describe the working of thermocouple.

Description : State seeback effect. Describe the working of thermocouple.

Last Answer : Seebeck effect: Seebeck effect states that whenever two dissimilar metals are connected together to form two junctions out of which, one junction is subjected to high temperature and another is subjected to ... both the junctions a very low emf is produced which causes a current in the circuit. 

What is piezoelectric effect? Name two piezoelectric material.

Description : What is piezoelectric effect? Name two piezoelectric material.

Last Answer : piezoelectric effect: Piezoelectric effect can be stated as follows: when a pressure or force or vibration is applied to crystalline material like quartz crystal or crystalline substances, then ... crystal: Quartz crystal ,Rochelle salt 2) Synthetic crystals : Barium Titanate, Lithium sulphate

Explain magnetic effect employed in measuring instrument.

Description : Explain magnetic effect employed in measuring instrument.

Last Answer : Magnetic Effect:  I) In PMMC meters:  ➢ When a current is passed through a conductor, magnetic field is produced round the conductor. Due to this field when current ... field it experiences a mechanical force.  Examples: Electrodynamometer type instruments, Induction type instrument. 

Define junction field effect transistor (JFET) and give an example.

Description : Define junction field effect transistor (JFET) and give an example.

Last Answer : Junction Field-Effect Transistor: It is a semiconductor device having three terminals, namely Gate, Drain and Source, in which the current flow is controlled by an electric field set up by an external voltage applied ... : i) n-channel JFET and ii) p-channel JFET Examples of JFET: BFW 10, BFW 11 

The effect of negative feedback on distortion and bandwidth is A) Both distortion and bandwidth get

Description : The effect of negative feedback on distortion and bandwidth is A) Both distortion and bandwidth get decreased B) Both distortion and bandwidth get increased C) Distortion is reduced and bandwidth is increased D) Distortion is increased and bandwidth is decreased 

Last Answer : The effect of negative feedback on distortion and bandwidth is Distortion is reduced and bandwidth is increased

The skin effect in conductors is due to non uniform distribution of current in it and major portion of current is

Description : The skin effect in conductors is due to non uniform distribution of current in it and major portion of current is near the _______ of conductor.  (1) Surface (2) Center (3) Complete cross section area (4) Axis

Last Answer : The skin effect in conductors is due to non uniform distribution of current in it and major portion of current is near the Surface of conductor. 

Ferranti Effect is more pronounced when ___________

Description : Ferranti Effect is more pronounced when ___________ A) the line is longer and the voltage applied is higher B) the line is shorter and the voltage applied is lower C) the line is shorter and the voltage applied is higher D) none of these

Last Answer : Ferranti Effect is more pronounced when the line is longer and the voltage applied is higher

Skin effect is absent in which of the following transmission systems?

Description : Skin effect is absent in which of the following transmission systems? A) Extra High Voltage (EHV) AC B) High Voltage Direct Current (HVDC) C) Both A and B D) None of these

Last Answer : Skin effect is absent in which of the following transmission systems? A) Extra High Voltage (EHV) AC B) High Voltage Direct Current (HVDC) C) Both A and B D) None of these

The effect of increasing load on a synchronous motor running with normal excitation is

Description : The effect of increasing load on a synchronous motor running with normal excitation is (A) Increase both its Ia and power factor. (B) Decrease Ia, but increase power factor. (C) Increase Ia, but decrease power factor (D) Decrease both Ia and power factor.

Last Answer : The effect of increasing load on a synchronous motor running with normal excitation is Increase Ia, but decrease power factor

The effect of a finite gain of an operational amplifier used in an integrator is that

Description : The effect of a finite gain of an operational amplifier used in an integrator is that (A) it would not integrate (B) the slope of the output will vary with time (C) the final value of the output voltage will reduce (D) there will be instability in the circuit

Last Answer : The effect of a finite gain of an operational amplifier used in an integrator is that there will be instability in the circuit

Skin effect occurs when a conductor carries current at_____ frequencies.

Description : Skin effect occurs when a conductor carries current at_____ frequencies.

Last Answer : Skin effect occurs when a conductor carries current at high frequencies.