According to principle of moments?

According to principle of moments?

by

2 Answers

Answer :

According to principle of moments if a system of coplanar forces is in equilibrium, then the algebraic sum of their moments about any point in their plane is zero.

by

Answer :

According  to  principle  of  moments  clockwise  moments  equals   anticlockwise  moments.
by

Related questions

The algebraic sum of moments of the forces forming couple about any point in their plane is?

Description : The algebraic sum of moments of the forces forming couple about any point in their plane is?

Last Answer : The algebraic sum of moments of the forces forming couple about any point in their plane is equal to the moment of the couple.

Two coplanar couples having equal and opposite moments?

Description : Two coplanar couples having equal and opposite moments

Last Answer : Two coplanar couples having equal and opposite moments can not balance each other.

D' Alembert's principle is used for?

Description : D' Alembert's principle is used for?

Last Answer : D' Alembert's principle is used for reducing the problem of kinetics to equivalent statics problem.

Why have both principle and principal when they can both be used interchangeably?

Description : Why have both principle and principal when they can both be used interchangeably?

Last Answer : Can they be used interchangeably? Correct me if I'm wrong, but I thought they had distinct meanings. Prinicpal being the leader of a school, or the original money down on a payment, or a sort-of ... a scientific law (and both probably having more meanings that I didn't think of). Am I mistaken?

State working principle of alternator. State the meaning self and separate excitation.

Description : State working principle of alternator. State the meaning self and separate excitation. 

Last Answer : Working principle of alternator: When a conductor is moved in magnetic field or a magnetic field moved with respect to conductor, according to Faraday's law of electromagnetic induction, the conductor ... like battery or shaft-mounted exciter, then the excitation is said to be separate excitation.

Explain the working principle of induction motor.

Description : Explain the working principle of induction motor. 

Last Answer : Working principle of induction motor: * When the motor is excited with three-phase supply, three-phase stator winding carries three-phase currents & produces a rotating magnetic field of constant magnitude and ... , which tend to move the rotor in the same direction as the rotating magnetic field. 

Explain with neat sketch the working principle of MIG.

Description : Explain with neat sketch the working principle of MIG.

Last Answer : In metal-arc inert gas welding the Weld area is shielded by an effectively inert atmosphere of argon, helium, carbon dioxide, or various other gas mixtures . The consumable bare Wire is fed automatically ... of the molten-weld puddle. Multiple-weld layers can be deposited at the joint. 

Describe the working principle of Thyristor operated dimmer with the help of circuit diagram.

Description : Describe the working principle of Thyristor operated dimmer with the help of circuit diagram.

Last Answer : Thyristor operated dimmer: A popular thyristor operated dimmer circuit employ TRIAC-DIAC phase control for low AC power control. During each half-cycle, the capacitor charges through (R1+VR1). When the ... time constant {C (R1+VR1)}. Thus by reducing VR1 the lamp brightness can be increased.

State the principle of operation of d.c. motor.

Description : State the principle of operation of d.c. motor.

Last Answer : When a current carrying conductor is placed in a magnetic field, the conductor experiences the force. The magnitude of force is given by F = BIL newton  where F – Force   B – maximum flux density   I – Current   L – Length of conductor

operating principle of PUT.

Description :  operating principle of PUT.

Last Answer : Constructional diagram & Operating principle of PUT:  The PUT is a PNPN device similar to SCR, but its operation is similar to the UJT. The PUT behave like a UJT whose trigger voltage VP can be set ... low resistance and VAK ≈ 1V). The PUT is also referred to as a complementary SCR (CSCR). 

State the working principle of gears and give its applications.

Description : State the working principle of gears and give its applications.

Last Answer : Working Principle:  Gears are mechanical elements which transmit motion by means of successively engaging teeth.  Gears are used to transmit motion from one shaft to another or between ... Agricultural equipment.  Industrial construction.  Mining equipment.  Automotive equipment.

State principle of operation of piezo-electric transducer. State its application.

Description : State principle of operation of piezo-electric transducer. State its application.

Last Answer : The piezoelectric element used for converting mechanical movement into electric signals. The mechanical deformation generates charges and this charge appears as a voltage across the electrodes.  ... destructive test (NDT) equipments 6. Piezoelectric materials are used in ultrasonic transducers. 

Describe the working principle of photoelectric pickup type tacho-generator.

Description : Describe the working principle of photoelectric pickup type tacho-generator.

Last Answer : Working: Working principle: The light passes through the holes available on the rotating disc with a specific interval, depends on the angular speed of disc having equidistant holes. The frequency of this light pulses ... by N=f/HS  N=speed  f=frequency  Hs=holes on the disc

Explain construction and working principle of single phase transformer.

Description : Explain construction and working principle of single phase transformer.

Last Answer : A single phase transformers is an electrical device that accepts single-phase AC power and outputs single-phase AC. PRINCIPLE... The single-phase transformer works on the principle of ... and secondary windings. Thin steel laminations shall be employed to prevent power losses from the core.

Describe principle of operation of Doppler type ultrasonic flow meter with diagram.

Description : Describe principle of operation of Doppler type ultrasonic flow meter with diagram. 

Last Answer : Diagram: Working:  The flow meter consists of a crystal transducer mounted outside the pipe in which flow is to be measured. This transducer is a piezoelectric crystal which ... , so the frequency of the reflected wave is shifted to particle velocity, according to Doppler principle.

State working principle of earth tester.

Description : State working principle of earth tester.

Last Answer : Earth tester:-The resistance of the earth is measured with the help of earth tester. It consists of a hand cranked type generator, the magnet poles, crossed coils and flexible spirals. It consists ... deflection of the pointer will indicate directly resistance in ohm of the earth under test.

Draw construction of Megger and write operating principle of it.

Description : Draw construction of Megger and write operating principle of it.

Last Answer : Megger:  Working: Two coils the current coil and pressure coil are mounted at an angle on the same spindle and form the part of the moving system. These coils are connected to a small hand driven ... . When the instrument is not working the pointer may rest at any position on the dial.

State working principle of PMMC instrument.

Description : State working principle of PMMC instrument.

Last Answer : Working Principle of PMMC Instrument: When current carrying conductor is placed in a constant magnetic field, it experiences a force proportional to the current and produces proportional deflection torque. 

Explain the operating principle of LASER and list applications of LASER diode.

Description : Explain the operating principle of LASER and list applications of LASER diode.

Last Answer : A basic construction of Laser diode is as shown . A PN junction is formed by two layers of doped gallium arsenide. There is highly reflective surface at one end of PN junction and ... 6. laser scanning and light beam illumination. 7. Military applications 8. Medical surgery 9.Diamond cutting

Draw symbol of LED and explain it’s working principle.

Description : Draw symbol of LED and explain it’s working principle.

Last Answer : Construction of LED: The basic structure of LED is shown in fig.(a). The active region exists between the p and n regions. The light emerges from the active side in all the directions when electron hole-pairs ... fig.(c). In this way an LED emits light. This is the principle of operation of LED.

State the working principle of transformer.

Description : State the working principle of transformer.

Last Answer : Working principle of transformer : Transformer works on the principle of mutual electromagnetic induction. When AC voltage is applied to the primary winding it causes ac current to flow through primary ... the secondary winding. The current flows in the secondary circuit if load is connected.

The transformer works on the principle of:

Description : The transformer works on the principle of: (A) Mutual induction (B) Mutual capacitance (C) All of the above (D) None of the above

Last Answer : The transformer works on the principle of:  Mutual induction

Principle of Thermocouple is based on :

Description : Principle of Thermocouple is based on :  (A) Thomson effect (C) Seebeck effect (B) Peltier effect (D) Kelvin effect

Last Answer :  The  principle is  based on Seebeck   effect.

A hysteresis motor works on the principle of?

Last Answer : A hysteresis motor works on the principle of hysteresis loss.

What is the principle of DC generator?

Description : What is the principle of DC generator?

Last Answer : principle

What is the principle of DC motor?

Description : What is the principle of DC motor?

Last Answer : principle

According to principle of transmissibility of forces, the effect of a force upon a body is?

Description : According to principle of transmissibility of forces, the effect of a force upon a body is?

Last Answer : According to principle of transmissibility of forces, the effect of a force upon a body is the same at every point in its line of action.

According to principle of moments (A) If a system of coplanar forces is in equilibrium, then their algebraic sum is zero (B) If a system of coplanar forces is in equilibrium, then the algebraic sum of their moments about any point in their plane is zero (C) The algebraic sum of the moments of any two forces about any point is equal to moment of their resultant about the same point (D) Positive and negative couples can be balanced

Description : According to principle of moments  (A) If a system of coplanar forces is in equilibrium, then their algebraic sum is zero  (B) If a system of coplanar forces is in equilibrium, then the ... of  their resultant about the same point  (D) Positive and negative couples can be balanced

Last Answer : (C) The algebraic sum of the moments of any two forces about any point is equal to moment of  their resultant about the same point 

According to Lami's theorem?

Last Answer : According to Lami's theorem if three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two.

An Athlets runs before long jump to get advantage on – (1) Inertia of motion (2) Frictional force (3) Moment of a force (4) Principle of moments

Description : An Athlets runs before long jump to get advantage on – (1) Inertia of motion (2) Frictional force (3) Moment of a force (4) Principle of moments

Last Answer : (1) Inertia of motion Explanation: An athlete does so to build up forward momentum so that when he jumps he already has a forward motion that would be greater than that of a jump made from standing in ... in terms of inertia of motion which is the tendency of an object to resist a change in motion.

If the principle of moments for any object holds, then object is in state of A. inertia B. equilibrium C. suspension D. motion

Description : If the principle of moments for any object holds, then object is in state of A. inertia B. equilibrium C. suspension D. motion

Last Answer : equilibrium

An athlete runs before long jump to get advantage on (1) Inertia of motion (2) Frictional force (3) Moment of a force (4) Principle of moments

Description : An athlete runs before long jump to get advantage on (1) Inertia of motion (2) Frictional force (3) Moment of a force (4) Principle of moments

Last Answer : Inertia of motion

Define angle of repose.

Description : Define angle of repose. 

Last Answer : Angle of repose is defined as the angle made by the inclined plane with the horizontal plane at which the body placed on an inclined plane is just on the point of moving down the plane, under the action of its own weight.

Define the ideal machine and ideal effort.

Description : Define the ideal machine and ideal effort.

Last Answer : Ideal Machine is the machine whose efficiency is 100 % and in which friction is zero.  Ideal Effort is the ratio of load lifted to velocity ratio.

six most common multiples

Description : six most common multiples

Last Answer : six most common multiples

A single force and a couple acting in the same plane upon a rigid body?

Description : A single force and a couple acting in the same plane upon a rigid body?

Last Answer : A single force and a couple acting in the same plane upon a rigid body cannot balance each other.

Kinetic friction is the?

Description : Kinetic friction is the?

Last Answer : Kinetic friction is the friction force acting when the body is in motion.

Tangent of angle of friction is equal to?

Description : Tangent of angle of friction is equal to?

Last Answer : Tangent of angle of friction is equal to coefficient of friction.

Dynamic friction as compared to static friction is?

Description : Dynamic friction as compared to static friction is?

Last Answer : Dynamic  friction  is   less  compared  to  static  friction.

Coulomb friction is the friction between?

Description : Coulomb friction is the friction between?

Last Answer : Coulomb friction is the friction between bodies having relative motion.

Limiting force of friction is the?

Description : Limiting force of friction is the?

Last Answer : Limiting force of friction is the friction force acting when the body is just about to move.

Coefficient of friction is the?

Description : Coefficient of friction is the?

Last Answer : Coefficient of friction is the ratio of limiting friction and normal reaction.

Frictional force encountered after commencement of motion is called?

Description : Frictional force encountered after commencement of motion is called?

Last Answer : Frictional force encountered after commencement of motion is called dynamic friction.

On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be?

Description : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be?

Last Answer : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be zero at its upper end.

On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be?

Description : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be?

Last Answer : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be upwards at its upper end.

The ratio of limiting friction and normal reaction is known as?

Description : The ratio of limiting friction and normal reaction is known as?

Last Answer : The ratio of limiting friction and normal reaction is known as coefficient of friction.

The coefficient of friction depends on?

Description : The coefficient of friction depends on?

Last Answer : The coefficient of friction depends on nature of surface.

Angle of friction is the?

Description : Angle of friction is the?

Last Answer : Angle of friction is the angle between normal reaction and the resultant of normal reaction and the limiting friction.

If a suspended body is struck at the center of percussion, then the pressure on...

Description : If a suspended body is struck at the center of percussion, then the pressure on die axis passing through the point of suspension will be?

Last Answer : If a suspended body is struck at the center of percussion, then the pressure on die axis passing through the point of suspension will be zero.