2 Answers

Answer :

The peak value of a sine wave is 200 V. Its average value is 127.4 V.

Answer :

e

Related questions

Description : Instantaneous value of a sine wave voltage

Last Answer : Instantaneous value of a sine wave voltage

Description : The equation of 50 Hz current sine wave having r.m.s. value of 60 A is?

Last Answer : (60*√2)Sin(2π*50*t)

Description : For a sine wave with peak value Imax the r.m.s. value is?

Last Answer : For a sine wave with peak value Imax the r.m.s. value is 0.707.

Last Answer :  A sine wave has a frequency of 50 Hz. Its angular frequency is 100 n radian/second.

Description : Draw a labeled block diagram of sine wave generator and state function of each block. 

Last Answer : Function Generator:  This instrument can deliver sine, triangular & square waves with frequency range of 0.01 Hz to 100 kHz.  The frequency control network is governed by a frequency ... voltage reaches a predetermined level on the negative slope of the integrator's output voltage.

Description : Form factor for a sine wave is?

Last Answer : 1.11

Description : what is mean by sine wave?

Last Answer : Hi, Sine wave means it is the wave form of sinusoidal wave generally of voltage or current. It takes the path of positive & negative half cycles. 1 set of positive and negative half cycles is called 1 cycle. frequency is no. of cycles per second (HZ). Thanks K.Srikanth

Description : Define : i) Average value ii) RMS value of an AC Wave.

Last Answer : i) Average value: The average value is defined as the average of all instantaneous values during one alternation . That is, the ratio of the sum of all considered instantaneous values to the ... as produced by the alternating current when flowing through the same resistance for the same time.

Description : An SSB transmitter produces a peak-to-peak voltage of 200 V across a 100 Ω antenna load. What is the Peak Envelope Power? A) 49.98 W B) 79.98 W C) 99.96 W D) 199.93 W

Last Answer : An SSB transmitter produces a peak-to-peak voltage of 200 V across a 100 Ω antenna load. What is the Peak Envelope Power? A) 49.98 W B) 79.98 W C) 99.96 W D) 199.93 W

Description : In a pure resistive circuit, the average power Pavg is ______ the peak power Pmax. (1) Double (2) One-half of (3) One-fourth (4) Equal to

Last Answer : In a pure resistive circuit, the average power Pavg is One-half of the peak power Pmax.

Description : Compare base load plant with peak load plant on any two points.

Last Answer : Points Base load plant Peak load plant Definition The power plant which supplies base load of load curve is known as base load plant  The power plant which supplies ... ,thermal,nuclear power station Small capacity storage hydro,pumped storage hydro,gas,diesel power station.

Description : State why nuclear power plants are used as base load plants and diesel power plants as a peak load plant. 

Last Answer : 1. Because of following points Nuclear power plant used as base load power plant:-  1. Nuclear power plants is very economical for producing bulk amount of electric power 2. Nuclear power plant is reliable ... . The plants can be put on load easily. 4. Diesel engines take less time to make OFF.

Description : Define form factor and peak factor.

Last Answer : Form factor is equal to rms value divided by average value ... Peak factor is equal to Max value divided by rms value.

Description : What is crest factor (peak factor)? A) It is the ratio of the maximum amplitude to average value B) It is the ratio of the average amplitude and RMS value C) It is the ratio of the maximum amplitude to RMS value D) None of these

Last Answer : What is crest factor (peak factor)? A) It is the ratio of the maximum amplitude to average value B) It is the ratio of the average amplitude and RMS value C) It is the ratio of the maximum amplitude to RMS value D) None of these

Description : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is (A) 28.2 mm (B) 26.4 mm (C) 24.4 mm (D) 22.0 mm

Last Answer : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is 22.0 mm

Description : Compare base load plant with peak load plant. 

Last Answer : Sr.No. Points Base load plant Peak load plant  1 Definition The power plant which supplies base load of load curve is known as base load plant The power ... power station   Small capacity storage hydro, pumped storage hydro, gas, diesel power station. 

Last Answer : Generators for peak load plants are usually designed for maximum efficiency at 50 to 75 percent full load.

Description : The average value of a 12 V peak sine wave over one complete cycle is? A.0 V B.1.27 V C.7.64 V D.6.37 V

Last Answer : The average value of a 12 V peak sine wave over one complete cycle is? A.0 V B.1.27 V C.7.64 V D.6.37 V

Description : State the concept of continuous wave RADAR. Sketch its block diagram. State its any two applications.

Last Answer : Concept- Transmission is continuous here, the circulator is used to provide isolation between the transmitter and the receiver. Since transmission is continuous, it would be pointless to use a ... It is used to measurement of relative velocity to distinguish moving target from stationary objects 

Description : State advantages and disadvantages of continuous wave Radar

Last Answer : Advantages continuous wave RADAR : 1.Single frequency transmission and hence narrow receiver bandwidth 2.Duty cycle is unity, so mean power can be as high as transmitters will permits. 3.Ability ... required for receiver and transmitter. 3.Cannot detect targets crossing its beam at right angles.

Description : Justify electromagnetic wave is said to be transverse wave. 

Last Answer : Transverse electromagnetic wave:- The electromagnetic waves are oscillations which propagate through free space. In electromagnetic waves the direction of electric field, magnetic field & propagation are ... electric field vector with respect to the surface (i.e. looking at the horizon) 

Description : Explain full wave bridged rectifier with the help of circuit diagram and input output waveform.

Last Answer : 1. In positive half cycle (0 to Π): The end A of the secondary winding becomes positive and end B negative. This makes diode D1 and D4 forward biased while diode D2 and D3 are reverse biased. These two diodes will ... D2 and D3 when it is conducting is as follows.  B - D2 - RL - D3 - A 

Last Answer : The period of a wave is time required to complete one cycle.

Description : Average value

Last Answer : Average value

Description : Define average value.

Last Answer : Average Value of Sinusoidal AC Waveform: The average value is defined as the arithmetical average or mean value of all the values of an alternating quantity over one cycle.  And/OR  For ... charge as is transferred by the alternating current during the same time under the same conditions. 

Description : In the case of an unsymmetrical alternating current the average value must always be taken over?

Last Answer : In the case of an unsymmetrical alternating current the average value must always be taken over the whole cycle.

Description : Give the operation of single phase full wave bridge controlled converter with RL load with a neat diagram. Also draw its waveform.

Last Answer : Single phase fully control bridge converter with RL load: 1. During positive half cycle of input voltage, T1 and T2 are forward biased and during negative half cycle, T3 and T4 are forward biased. Therefore, T1-T2 ... cycle till the firing of next pair of SCRs as shown in the waveform.

Description : Draw a neat diagram of 1Ф half wave controlled converter with RL load. Give its operation.

Last Answer : Single phase fully controlled half wave converter:  The circuit diagram of single-phase half-wave controlled rectifier with RL load and without freewheeling diode is shown in Fig. (a). The SCR T is ... , when again pulse is applied, the SCR is turned on & the above cycle is repeated. 

Description : How To Make A Wave Bottle

Last Answer : Students will observe water moving in waves. Materials: A 1 liter plastic bottle for each student. Vegetable oil Food coloring Water Paper Pencils Instructions: Give each student a plastic bottle. Ask ... effect waves such as the ocean floor, sandbars, rocky coasts and, of course, the moon.

Description : How to Stay Cool in a Heat Wave

Last Answer : How to Stay Cool in a Heat Wave A heat wave may last for a few days to a few weeks and may happen with extreme humidity. Though you can't prevent heat waves, there are things you can do to ... your home. There are a lot of alternatives you can do to keep your home and your family heatwave safe.

Description : How does Wave Energy Work?

Last Answer : How does Wave Energy Work? There has been a major shift in thinking all around the world on what types of energy we should use. Unfortunately, the world currently runs on fossil fuels such as oil and ... attractive in the next couple of decades. This should lead to a spur in their wide scale use.

Description : Draw single phase full wave mid-point converter for inductive load. Draw input and output waveforms for it. 

Last Answer : Circuit Diagram: Waveforms:

Description : operation of half wave rectifier type AC Voltmeter.

Last Answer :  Half-wave Rectifier Voltmeter The d'Arsonval meter movement only responds to the average or dc value of the current through the moving coil. In order to measure alternating ... ) input voltage signal alternating signal needs to be rectified first by using diode rectifier to produce 

Description : The coefficient of reflection for current wave is

Last Answer : The coefficient of reflection for current wave is 1 or -1

Description : The velocity of travelling wave through a cable of relative permittivity 36 is

Last Answer : The velocity of travelling wave through a cable of relative permittivity 36 is 0.5 x 108 m/sec

Description : The fractional-pitch used for eliminating 7th harmonic from the emf wave of an alternator is (A) 2/3 (B) 5/6 (C) 7/8 (D) 6/7

Last Answer : The fractional-pitch used for eliminating 7th harmonic from the emf wave of an alternator is 6/7

Last Answer : Wave winding is composed of that even number which is exact multiple of poles + 2.

Last Answer : Wave trap is used to trap waves of higher frequencies entering generator or transformer units.

Last Answer : When a transmission line is energized, the wave that propagates on it is current wave and voltage wave.

Description : Explain three phase half wave controller or three phase unidirectional controller.

Last Answer : Three phase half wave controller or unidirectional controller:

Description : Explain three phase full wave controller.

Last Answer : Three phase full wave controller: Three phase full wave controller is also called as the three-phase bidirectional controller. Let the load is star connected so at each phase there are antiparallel connected SCRs. ... conduct at the same time and the third phase will be open.

Description : Which countries are using wave energy?

Last Answer : The following countries are using wave energy :GreecePortugalUnited StatesUnited KingdomSpainIsraelSweden

Description : What are the advantages and disadvantages of wave energy?

Last Answer : AdvantagesFree from pollutionAvailable for every timeThe water can reuse as drinking purposeDisadvantageMore costLarge maintenanceDifficult to constructAquatic life get affected

Description : If the peak value of a sine wave is 30 V, the rms value is? A.19.08 V B.7.07 V C.0.707 V D.23.10 V

Last Answer : If the peak value of a sine wave is 30 V, the rms value is? A.19.08 V B.7.07 V C.0.707 V D.23.10 V

Description : The r.m.s. value of a sinusoidal A.C. current is equal to its value at an angle of______degrees.

Last Answer : 45

Description : Define : i) Maximum Value ii) RMS Value of ac supply

Last Answer : i) Maximum Value :- The maximum or peak value attained by an alternating quantity during positive or negative half cycle, is called maximum value or peak value.  ii) RMS Value of ac ... as produced by the alternating current when flowing through the same resistance and for the same time. 

Description : RMS value formula

Last Answer : RMS value formula

Description : Define RMS value.

Last Answer : RMS Value of Sinusoidal AC Waveform: The RMS value is the Root Mean Square value. It is defined as the square root of the mean value of the squares of the alternating quantity over one cycle ... power or heat as is produced by the alternating current during the same time under the same conditions.

Description : Which of the following connection of transformers will give highest value of secondary voltage ? (A) Delta primary delta secondary (B) Delta primary star secondary (C) Star primary star secondary (D) Star primary delta secondary

Last Answer : Which of the following connection of transformers will give highest value of secondary voltage ? (A) Delta primary delta secondary (B) Delta primary star secondary (C) Star primary star secondary (D) Star primary delta secondary

Description : For a round wire, the approximate value of fusing current is given by

Last Answer : For a round wire, the approximate value of fusing current is given by  K√d3