# In a loss-free R-L-C circuit the transient current is?

In a loss-free R-L-C circuit the transient current is?

## 1 Answer

### Answer :

In a loss-free R-L-C circuit the transient current is sinusoidal.

## Related questions

Description : Magnitude of current at resonance in R-L-C circuit?

Last Answer : The current will be maximum if it is a series rlc circuit.

Description : In a circuit containing R, L and C, power loss can take place in?

Last Answer : In a circuit containing R, L and C, power loss can take place in R only.

Description : In parallel RLC resonance circuit at resonance the current will be  (1) Minimum (2) Maximum (3) Zero (4) Infinite

Last Answer : In parallel RLC resonance circuit at resonance the current will be Minimum

Description : In a series RLC high Q circuit, the current peaks at a frequency  (1) equal to the resonant frequency (2) greater than the resonant frequency (3) less than the resonant frequency (4) equal to half the resonant frequency

Last Answer : In a series RLC high Q circuit, the current peaks at a frequency equal to the resonant frequency

Description : In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of?

Last Answer : In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of L or C.

Description : In a R-L-C circuit?

Last Answer : In a R-L-C circuit power is consumed in resistance and is equal to I R, exchange of power takes place between inductor and supply line, exchange of power takes place between capacitor and supply line, exchange of power does not take place between resistance and the supply line.

Description : The power factor at resonance in R-L- C parallel circuit is?

Last Answer : since a rlc circuit at resonance behaves like a pure resistive circuit, i.e there is no phase difference between current and voltage, hence the power factor is unity.

Description : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C?

Last Answer : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C? 7 V

Last Answer : When the total impendance equals  supply frequency.

Description : A ferrite core has less eddy current loss than an iron core because?

Last Answer : A ferrite core has less eddy current loss than an iron core because ferrites have high hysteresis.

Description : What is the difference between eddy current and hysteresis loss?

Last Answer : Loss occurred by magnetising and demagnetising process is called histerisis loss and the current flowed due to the magnetic field produced by the electric field applied is called eddy current losses

Description : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Last Answer : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Description : The loop equation for a series RLC circuit gives

Last Answer : The loop equation for a series RLC circuit gives

Description : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the

Last Answer : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the C only

Description : The eddy current loss in a dc generator is 400 W at 40 Hz frequency of reversal and constant flux density. When frequency is increased to 50 Hz., eddy current loss is :  (A) 256 W (B) 320 W (C) 500 W (D) 625 W

Last Answer : The eddy current loss in a dc generator is 400 W at 40 Hz frequency of reversal and constant flux density. When frequency is increased to 50 Hz., eddy current loss is : 625 W

Description : Explain hysteresis loss, eddy current loss and skin effect limitations with reference to magnetic material.

Last Answer : Hysteresis loss: Hysteresis loss is a loss which occurs due to the friction of magnetic domain due to the change in magnetic field in ferromagnetic material like iron. Hysteresis loss causes power loss ... loss in transformer is given by, We=Kef2Kf2Bm2watts Skin effect limitations:

Description : In a series R-C circuit, with the increase in frequency, current (A) Reduces (B) Increases (C) Does not change (D) Becomes zero

Last Answer : In a series R-C circuit, with the increase in frequency, current Increases

Description : The transient currents are associated with the?

Last Answer : The transient currents are associated with the changes in the stored energy in the inductors and capacitors.

Description : The double energy transient occur in the?

Last Answer : The double energy transient occur in the R-L-C circuit.

Description : What is the direction of flow of electric current in an electric circuit?

Last Answer : It  flows  from  anode  to  cathode  (direction  of   holes  flow)

Description : The steady state stability limit as compared to the transient state stability limit is always

Last Answer : The steady state stability limit as compared to the transient state stability limit is always Greater

Description : The 'Equal area criterion' for the determination of transient stability of a synchronous machine connected to an infinite bus  (1) ignores line as well as synchronous machine resistance ... consideration the possibility of machine losing synchronism after it has survived during the first swing.

Last Answer : 1

Description : With fault clearing time, the transient stability of a power system

Last Answer : With fault clearing time, the transient stability of a power system decreases

Description : Improvement of transient stability using SVC

Last Answer : Improvement of transient stability using SVC The static VAR compensator (SVC) is a shunt connected FACTS device. SVC have two modes one is inductive ... ;transmittable power. Transient stability improvement can be estimated using equal area criterion.

Description : If the % reactance upto the fault point is 20%, then the short circuit current will be

Last Answer : If the % reactance upto the fault point is 20%, then the short circuit current will be 5 times the full load current

Description : The armature current on symmetrical 3 phase short circuit of a synchronous machine (salient pole)  (A) has q -axis current only (B) has d -axis current only (C) has both d and q axis currents (D) cannot be divided between q and d axis currents

Last Answer : The armature current on symmetrical 3 phase short circuit of a synchronous machine (salient pole) has d -axis current only

Description : When one leg of parallel circuit is opened out the total current will?

Last Answer : When one leg of parallel circuit is opened out the total current will decrease.

Description : Electric current passing through the circuit produces?

Last Answer : Electric current passing through the circuit produces thermal effect.

Description : In which fault the maximum short circuit current occurs?

Last Answer : In three phase bolted fault the maximum short circuit occurs.

Description : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is

Last Answer : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is 500 Hz

Description : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Last Answer : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Description : At ______ frequencies the parallel R-L circuit behaves as purely resistive.

Last Answer : At very high frequencies the parallel R-L circuit behaves as purely resistive.

Description : If resistance is 20 Q. and inductance is 27 in a R-L series circuit, then time constant of this circuit will be?

Last Answer : 0.1s

Last Answer : If the current in a capacitor leads the voltage by 80°, the loss angle of the capacitor is 10°.

Last Answer : Corona is nothing but the ionization of surrounding air around the conductor which produces hissing noise,

Description : State the factors affecting hysteresis loss.

Last Answer : i) Flux density ii) Frequency iii) Volume of the magnetic material iv) Nature of magnetic material

Description : At full -load of a transformer, the iron loss and copper loss are 3000 W and 4000 W respectively. Then total loss at maximum efficiency is :  (A) 7000 W (B) 6000 W (C) 8000 W (D) 4000 W

Last Answer : At full -load of a transformer, the iron loss and copper loss are 3000 W and 4000 W respectively. Then total loss at maximum efficiency is : 6000 W

Description : In a magnetic material hysteresis loss takes place primarily due to?

Last Answer : In a magnetic material hysteresis loss takes place primarily due to it high retentivity.

Description : A universal RLC bridge uses?

Last Answer : A universal RLC bridge uses Maxwell Wein bridge for measurement of inductance and modified De Santy's bridge for measurement of capacitance.

Description : The series and parallel resonance on L-C circuit differs in that?

Last Answer : The series and parallel resonance on L-C circuit differs in that series resistance needs a low-resistance source for sharp rise in current.

Description : In a series L-C circuit at the resonant frequency the?

Last Answer : In a series L-C circuit at the resonant frequency the current is maximum.

Description : How can I get over a loss?

Last Answer : This kind of thing sticks with you. The pain will dull over time, but will never disappear. When I was a teen, about forty years ago, I had a close friend. We made plans together about our ... sorry for your loss. You are welcome to pm me anytime to share your feelings, thoughts, or memories.

Description : How do I get over the loss of my best friend?

Last Answer : Have you tried a different method of approach? A way that she won’t be able to ignore?

Description : How do you cope with loss and tragedy?

Last Answer : A good cry and a few beers.

Description : How to Choose Weight Loss Surgery ?

Last Answer : How to Choose Weight Loss Surgery Sometimes weight problems can spiral out of control to a point where surgery is needed to save a person's life. Bariatric surgery is a group of surgical options that ... the right decision to put you back on the straight, narrow path of clean and healthy living.

Description : How to Set Weight Loss Goals ?

Last Answer : How to Set Weight Loss Goals Weight loss is a top priority for most people who want to lead a healthy, fit lifestyle. Losing extra weight can take a lot of commitment, but some people may want instant ... . With these tips, you can set your weight loss goals and be a step away to healthy living.

Description : How to Make a Weight Loss Fitness Plan ?

Last Answer : Having a toned body not only looks appealing, it also promotes good health. For some people, the first step to achieve that figure is to lose weight. Losing weight is quite challenging, ... go signal. For more information regarding this article, read Top ten ways to effectively lose weight.

Description : How to Make a Weight Loss Diet Plan ?

Last Answer : Losing weight is quite a daunting task for many people. They have to lower their intake of food, exercise, and increase their metabolic rates. Having a fitness plan is not enough, since you'll be hungry ... by all means, slimming down is possible. So, don't lose hope and stick to your diet plan.

Description : Water Works for Weight Loss

Last Answer : Nothing quells the appetite like water, lots and lots of water. Start out with two quart bottles in the morning and carry one with you to work or wherever you go. If you like, divvy up the 64 ... out the system, rids the body of bloat and toxins and rosies up the complexion. Now, start splashing.

Description : Weight Loss Tips

Last Answer : Weight Loss Tips and Advice 1. Stretch your meals to, at least, 20 minutes or longer. Your stomach, mouth and brain are all connected and it takes 20 minutes of chewing before your stomach signals ... foods and your metabolism will continue to burn your stored fat as fast as your body will allow.