In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of?

1 Answer

Answer :

In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of L or C.

Related questions

Description : Magnitude of current at resonance in R-L-C circuit?

Last Answer : The current will be maximum if it is a series rlc circuit.

Description : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is

Last Answer : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is 500 Hz

Description : In a series L-C circuit at the resonant frequency the?

Last Answer : In a series L-C circuit at the resonant frequency the current is maximum.

Description : In a series RLC high Q circuit, the current peaks at a frequency  (1) equal to the resonant frequency (2) greater than the resonant frequency (3) less than the resonant frequency (4) equal to half the resonant frequency

Last Answer : In a series RLC high Q circuit, the current peaks at a frequency equal to the resonant frequency

Description : The power factor at resonance in R-L- C parallel circuit is?

Last Answer : since a rlc circuit at resonance behaves like a pure resistive circuit, i.e there is no phase difference between current and voltage, hence the power factor is unity.

Description : In series resonant circuit, increasing inductance to its twice value and reducing capacitance to its half value?  

Last Answer : In series resonant circuit, increasing inductance to its twice value and reducing capacitance to its half value will increase the selectivity of the circuit.

Description : The series and parallel resonance on L-C circuit differs in that?

Last Answer : The series and parallel resonance on L-C circuit differs in that series resistance needs a low-resistance source for sharp rise in current.

Description : In a series resonant circuit, the impedance of the circuit is?

Last Answer : In a series resonant circuit, the impedance of the circuit is minimum.

Description : In parallel RLC resonance circuit at resonance the current will be  (1) Minimum (2) Maximum (3) Zero (4) Infinite

Last Answer : In parallel RLC resonance circuit at resonance the current will be Minimum 

Description : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C?

Last Answer : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C? 7 V

Description : In a series R-C circuit, with the increase in frequency, current (A) Reduces (B) Increases (C) Does not change (D) Becomes zero

Last Answer : In a series R-C circuit, with the increase in frequency, current Increases

Description : The loop equation for a series RLC circuit gives

Last Answer : The loop equation for a series RLC circuit gives

Description : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the

Last Answer : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the C only

Description : A parallel AC. circuit in resonance will?

Last Answer : A parallel AC. circuit in resonance will have a high impedance.

Description : The purpose of a parallel circuit resonance is to magnify?

Last Answer : The purpose of a parallel circuit resonance is to magnify voltage.

Last Answer : When the total impendance equals  supply frequency.

Description : In a R-L-C circuit?

Last Answer : In a R-L-C circuit power is consumed in resistance and is equal to I R, exchange of power takes place between inductor and supply line, exchange of power takes place between capacitor and supply line, exchange of power does not take place between resistance and the supply line.

Description : In a loss-free R-L-C circuit the transient current is?

Last Answer : In a loss-free R-L-C circuit the transient current is sinusoidal.

Description : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Last Answer : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Description : If resistance is 20 Q. and inductance is 27 in a R-L series circuit, then time constant of this circuit will be?

Last Answer : 0.1s

Description : At very low frequencies a series R-C circuit behaves as almost purely?

Last Answer : At very low frequencies a series R-C circuit behaves as almost purely capacitive.

Description : The time constant of a series R-C circuit is given by?

Last Answer : The time constant of a series R-C circuit is given by RC.

Description : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Last Answer : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Description : Series circuit rules

Last Answer : Series circuit rules

Description : Which of the following is true with a series circuit having resistors of different values? A) The total resistance of the circuit is the sum of the individual resistances B) The current across each ... ) The voltage drop across each resistor depends on the value of the resistor D) All the above

Last Answer : Which of the following is true with a series circuit having resistors of different values? A) The total resistance of the circuit is the sum of the individual resistances B) The current across ... voltage drop across each resistor depends on the value of the resistor D) All the above

Description : Source transformation Replace the circuit with voltage source in series with a single resistor

Last Answer : Source transformation Replace the circuit with voltage source in series with a single resistor

Description : In a series circuit with unequal resistances?

Last Answer : In a series circuit with unequal resistances the highest resistance has the highest voltage drop.

Description : A ferro resonant transformer regulation is also known as?

Last Answer : A ferro resonant transformer regulation is also known as constant current transformer.

Description : In a circuit containing R, L and C, power loss can take place in?

Last Answer : In a circuit containing R, L and C, power loss can take place in R only.

Description : Oil Filter Changing

Last Answer : It is recommended that you change your oil filter once every six months (or every 6000 miles, whichever of the two comes first). Failure to do so will have your engine run the risk of degradation and failure ... the filter mounts to the engine. Screw the new filter in place. Put in the new oil.

Description : Define Resonance. 

Last Answer : When the frequency of the external periodic force applied to a body is exactly equal to ( matches) natural frequency of body, the body vibrates with maximum amplitude, the effect is known as resonance 

Description : Which of the following is true at resonance in LC circuits? A) The series impedance of the two elements is at a maximum and the parallel impedance is at minimum B) The series impedance of the ... D) The series impedance of the two elements is at a minimum and the parallel impedance is at maximum

Last Answer : Which of the following is true at resonance in LC circuits? A) The series impedance of the two elements is at a maximum and the parallel impedance is at minimum B) The series impedance of ... D) The series impedance of the two elements is at a minimum and the parallel impedance is at maximum

Description : What is the Laplace transform of step signal of 5 units magnitude?  A) 5s B) 5/s C) s/5 D) 1/s 

Last Answer : What is the Laplace transform of step signal of 5 units magnitude?  A) 5s B) 5/s C) s/5 D) 1/s 

Description : In a Bode magnitude plot, which one of the following slopes would be exhibited at high frequencies by a 4th order all-pole system? (A) – 80 dB/decade (B) – 40 dB/decade (C) +40 dB/decade (D) +80 dB/decade

Last Answer : In a Bode magnitude plot, which one of the following slopes would be exhibited at high frequencies by a 4th order all-pole system? (A) – 80 dB/decade (B) – 40 dB/decade (C) +40 dB/decade (D) +80 dB/decade

Description : If two equal forces of magnitude P act at an angle 9°, their resultant will be

Last Answer : If two equal forces of magnitude P act at an angle 9°, their resultant will be IP cos 9/2.

Description : The magnitude of various voltage drops that occur in an alternator depends on?

Last Answer : The magnitude of various voltage drops that occur in an alternator depends on load current.

Description : A network is said to be under resonance when the voltage and the current at the network input terminals are (A) in phase (B) out of phase (C) in phase quadrature (D) in phase, and have equal magnitudes

Last Answer : A network is said to be under resonance when the voltage and the current at the network input terminals are in phase

Description : Can i change my son's name on the net?

Last Answer : Sure just fill out the paper work and pay the fee.

Description : State the need of multistage amplifier. Draw frequency response of R-C coupled amplifier.

Last Answer : The need of multistage amplifier The voltage (or power) gain, obtained from a single stage small signal amplifier, is limited. Therefore, it is not sufficient for all practical applications. Therefore, in ... to use a MULTISTAGE AMPLIFIER .  Frequency response of R-C coupled amplifier.

Description : X L and X C in Series

Last Answer : Inductive reactance X L and Capacitive reactance X C in series. Inductive reactance X L of value 60 ohm and Capacitive reactance X C of value 40 ohm are connected in series. 120 volts A C voltage is ... . The current will be 6 ampere. This time current will lead the voltage by 90 degree.

Description : An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance 

Last Answer : Solution: For RLC series circuit

Description : A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C is doubled from its original value, the new Q of the circuit is:  (1) 25 (2) 50 (3) 100 (4) 200

Last Answer : A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C is doubled from its original value, the new Q of the circuit is: 200.

Description : At ______ frequencies the parallel R-L circuit behaves as purely resistive.

Last Answer : At very high frequencies the parallel R-L circuit behaves as purely resistive.

Description :  An independent voltage source in series with an impedance ZS=R+jXS delivers a maximum average power to a load impedance ZL when A) ZL = R B) ZL = jXS C) ZL = R-jXS D) ZL = R+jXS 

Last Answer :  An independent voltage source in series with an impedance ZS=R+jXS delivers a maximum average power to a load impedance ZL when ZL = R-jXS

Description : Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage across each resistor, if the value of each of the resistors is doubled? A) It will double B) It will remain the same C) It will be halved D) It will become zero

Last Answer : Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage across each resistor, if the value of each of the resistors is doubled? A) It will double B) It will remain the same C) It will be halved D) It will become zero

Last Answer : The direction of rotation of a D.C. series motor can be changed by interchanging field terminals.

Description : In L-C-R series circuit suppose `omega_(r)` is resonance frequency, then match the following table, `{:(,,"Table-1",,"Table-2"),(,(A),"If " omegagtome

Last Answer : In L-C-R series circuit suppose `omega_(r)` is resonance frequency, then match the following table, `{:(,,"Table ... are in phase"),(,,,(T),"None"):}`

Description : Two waves have frequency of 500 Hz. One is set at its maximum value whereas the other at zero. The phase angle between them will be

Last Answer : Two waves have frequency of 500 Hz. One is set at its maximum value whereas the other at zero. The phase angle between them will be 90o

Description : Principal of digital frequency meter.

Last Answer : The basic block diagram of basic digital frequency meter (DFM) is shown in above figure. The signal whose frequency we have to be measured is first to be amplified through amplifier. The output of amplifier ... = Number of counts. t = Time interval between start and stop condition of the gate.

Description : Define the following terms: 1) Virtual height 2) Actual height 3) Critical frequency. 4) Maximum usable frequency.

Last Answer : 1) Virtual height:- The incident and refracted rays follow paths that are exactly the same as they have been if reflection had taken place from a surface located at a greater height, called ... angle of incidence is other than the normal is known as maximum unstable frequency. MUF= fc secθ