If there are 8 division between the 0 mark and 0.4 mark of an ammeter it's least count is what?

1 Answer

Answer :

Need answer

Related questions

Description : The least count of a Vernier scale is  (A) Sum of the smallest divisions of main and Vernier scales  (B) Value of one division of the primary scale divided by total number of divisions ... division of Vernier scale divided by total number of divisions of primary scale  (D) None of these 

Last Answer : (B) Value of one division of the primary scale divided by total number of divisions of Vernier  scale 

Description : Mark correct option relating to live mail survey a) The survey is to be conducted in one delivery PO in each Postal Division. b) The PO to be selected should have a reasonable quantity of mail for study. ... least 25% of the total mails received in the PO selected is to be studied. e) All the above

Last Answer : e) All the above

Description : A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale reading is 5 mm and zero of circular

Last Answer : A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale ... (C) 0.053 cm (D) 0.529 cm

Description : Mark the correct option a) The Inspector should maintain a register of lines and stages in respect of his sub division in form M-40 b) Entries should be made in the register in alphabetical ... in accordance with correction memos issued by the Superinendent from time to time. d) All the above

Last Answer : d) All the above

Description : A three-phase alternator operates at 450 volts with a power factor of 0.8. If the ammeter indicates 250 amperes, what should be the KW meter reading? A. 90.00 KW B. 127.27 KW C. 155.70 KW D. 194.85 KW

Last Answer : Answer: C

Description : A three-phase alternator is operating at 450 volts with the switchboard ammeter indicating 300 amps. The kw meter currently indicates 163.6 KW, with a power factor of 0.7. If the power factor increases to 0.8, the KW meter would then read ____________. A. 181.4 KW B. 186.8 KW C. 194.2 KW D. 201.4 KW

Last Answer : Answer: B

Description : A three-phase alternator is operating at 450 volts with the switchboard ammeter indicating 300 amps. The kw meter currently indicates 163.6 KW, with a power factor of 0.7. If the power factor increases to 0.8, the KW meter reading would increase by ___ A. 17.8 KW B. 23.2 KW C. 30.6 KW D. 37.8 KW

Last Answer : Answer: B

Description : Mark the correct option a) The Inspector should supply each head, sub or branch office in his sub-division including first class head offices, with a village sorting list (M-52) b) The Village ... boxes are placed and which of these letter-boxes are provided with changeable plates d) All the above

Last Answer : d) All the above

Description : Mark the correct option a) A Supdt of PO or RMS should not ordinarily remain in charge of the same division for more than 4 years b) Every Supdt of PO should hol charge of RMS Dn for atlease 4 years, c ... or RMS and IPO/IRM should not remain in the same Dn not more than 4 years e) All the above

Last Answer : e) All the above

Description : Steel rules least count?

Last Answer : 0.5mm

Description : What is the least count of out-side micrometer?  

Last Answer : The least count of out-side micrometer is 0.01mm. 

Description : Every postmaster or record clerk, as the case may be, should at least once in every _______, count and examine the bags of his office and satisfy himself that they are correct and in once in serviceable ... that bags of suitable sizes are kept in stock a) Month b) Quarter c) Six month d) Year

Last Answer : b) Quarter

Description : In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per ... legs) (A) 50" n (B) 30" n (C) 60" n (D) None of these

Last Answer : (A) 50" n

Description : Mark correct option related to unpaid and insufficiently paid airmail articles a) In case letters, cards and aerogrammes if postage paid least 75% of the surcharge(letter) or combined charge (PC& ... will be dispatched through surface. c) The charge collected from addressee at the time of delivery

Last Answer : d) All of the above are correct

Description : A DC ammeter has resistance `0.1 Omega` and its current ranges `0-100 A`. If the range is to be extended to `0-500`, then the following shunt resistan

Last Answer : A DC ammeter has resistance `0.1 Omega` and its current ranges `0-100 A`. If the range is to be extended ... Omega` C. `0.025 Omega` D. `0.25 Omega`

Description : A 0-10 mA PMMC ammeter reads 5mA in a circuit; its bottom control spring snaps out suddenly the meter will now read. a) 5mA b) 10mA c) 2.5mA d) 0

Last Answer : Ans: 0

Description : An ammeter has a current change of 0-5A and its internal resistance is 0.2 ohm. In order to Change the range to 0-25 A, wear need to add a resistance of  A) 0.8 ohm in series with the meter B) ... series with the meter C) 0.04 ohm in parallel with the meter D) 0.05 ohm in parallel with the meter

Last Answer : An ammeter has a current change of 0—5A and its internal resistance is 0.2 ohm. In order to Change the range to 0-25 A, wear need to add a resistance of 0.05 ohm in parallel with the meter

Description :  A 0 -10 mAPMMC ammeter reads 5 mA in a circuit; its bottom control spring snaps out suddenly the meter will now read:- a) 5 mA b) 10 mA c) 2.5 mA d). 0

Last Answer :  A 0 -10 mAPMMC ammeter reads 5 mA in a circuit; its bottom control spring snaps out suddenly the meter will now read:- 0

Description : In the circuit shown in Fig. 4.64, the battery has an emf of 12.0 V and an internal resistance of `5R//11`. If the ammeter reads 2.0 A, what is the va

Last Answer : In the circuit shown in Fig. 4.64, the battery has an emf of 12.0 V and an internal resistance of ` ... ammeter reads 2.0 A, what is the value of R ?

Description : In a ammeter `0.2%` of main current passes through the galvanometer. If resistance of galvanometer is `G`, the resistance of ammeter will be

Last Answer : In a ammeter `0.2%` of main current passes through the galvanometer. If resistance of galvanometer is `G`, the ... 1)/(500)G` D. `(500)/(499)G`

Description : A moving coil galvanometer is converted into an ammeter reads upto `0.03 A` by connecting a shunt of resistance `4r` across it and ammeter reads up `0

Last Answer : A moving coil galvanometer is converted into an ammeter reads upto `0.03 A` by connecting a shunt of resistance `4r` ... `0.02A` C. `0.03A` D. `0.04A`

Description : In the schematic diagram of the DC compound generator shown in the illustration, the positive ammeter reading is 500 amps and the negative ammeter reading is 475 amps. What is the current flow through the neutral bus? EL-0037 A. 0 amp B. 12.5 amp C. 25 amp D. 975 amp

Last Answer : Answer: C

Description : Ideal resistance of ammeter is A. 1 Ω B. 2 Ω C. 0 Ω D. infinite

Last Answer : 0 Ω

Description : An ammeter has a full-scale deflection current of 100mA. If the same ammeter is used to measure a full-scale current of 1.0ampere, what is the value of the shunt resistor in ohms if the voltage across the meter is 9.0 volts?

Last Answer : 10 ohms

Description : A galvanometer of 65 Ω resistance gives full scale deflection with 4 mA current. In order to convert it into ammeter, the range of 10 A is connected with it, the shunt resistance should be a) 0.1 Ω b) 0.2 Ω c) 0.06 Ω d) 0.03 Ω

Last Answer : d) 0.03 Ω

Description : A neon flashlight cell with an emf of 1.5V gives a current of 15A when connected directly to an ammeter of resistance 0.04?. Internal resistance of the cell is a. 0.0004? b. 0.06? c. 0.10? d. 0.13?

Last Answer : b. 0.06?

Description : A 10A DC Ammeter has a resistance of 0.1 Ω is to be extended to 50 A, the required shunt wire is A) Manganin wire of 20 m Ω B) Constantan wire of 20 m Ω C) Manganin wire of 25 m Ω D) Constantan wire of 25 m Ω

Last Answer : A 10A DC Ammeter has a resistance of 0.1 Ω is to be extended to 50 A, the required shunt wire is Manganin wire of 25 m Ω

Description : A 0-10 A ammeter has a guaranteed accuracy of 1% of full scale deflection, the limiting error while reading 2.5 A will be (a) 1% (b) 2% (c) 4% (d) None of these 

Last Answer : A

Description : Laboratory monitoring of coagulation and anticoagulation includes testing of platelet function. Which of the following statements is/are true concerning tests of platelet function? a. A ... platelet aggregation should be part of the standard preoperative evaluation of patients using aspirin

Last Answer : Answer: a, c Tests of platelet function include peripheral platelet counts, bleeding times, and platelet aggregation. Usually, a platelet count of 50,000/mL or more ensures adequate hemostasis ... is not available in most laboratories, probably because of the observer-dependent nature of the test

Description : An ammeter reads slightly above 'zero' when its leads are disconnected, this is a result of ___________. A. mechanical misalignment of the meter pointer B. a poor ground for the meter case C. static electricity in the air D. resistors inside the meter storing charges

Last Answer : Answer: A

Description : The basic meter movement responds to the flow of current through its coil. Therefore, this meter movement may be used as a/an _____________. A. voltmeter by placing a resistance in parallel with the ... in parallel with the coil D. ammeter by placing a low resistance in parallel with the coil

Last Answer : Answer: D

Description : In order to increase its range of measurement, a resistance would be placed in series with which of the following instruments? A. DC voltmeter B. DC ammeter C. frequency meter D. power factor meter

Last Answer : Answer: A

Description : The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. This is to have full deflection when 100V is measured. What is the value of series resistor to be used?

Last Answer : The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. This is to have full deflection when 100V is measured. 99.99 K ohms is the value of series resistor to be used.

Description :  The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. If this meter is to have full deflection at 5A, what is the value of the shunt resistance to be used?

Last Answer :  The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. If this meter is to have full deflection at 5A, 1/49.99 ohms is the value of the shunt resistance to be used.

Last Answer :  If a DC voltmeter is made from an ammeter having a fed of 100μA then its sensitivity (in KΩ/V) will be 10.

Description : I’ve made some friends but for a year I’ve been lyin that my body count is 1. My real friends know its 0 and they are gona come stay with me for a while and I’m freaking out of both of them finding out the truth! Im sick of Lying. What should I do?

Last Answer : Tell the truth to see if they’re your real friends

Description : What is ammeter shunt ?

Last Answer : A small amount of radial coupling in parallel with the coil to increase the range of ammeter is called ammeter shunt.

Description : What is meant by Voltmeter & Ammeter ?

Last Answer : Voltmeter measures the voltage of any load or any line and the voltmeter has to be connected parallel to the load. The ammeter measures the current flowing through a load or the current of an electrical line. The ammeter is connected in series with the load.

Description : What should be the resistance of a standard ammeter ?

Last Answer : The resistance of a standard ammeter should be zero.

Description : What are the physical quantities measured with voltmeter and ammeter ?

Last Answer : : The voltage difference between two points of a circuit is measured with a voltmeter. And the flow rate of an electric circuit is measured with an ammeter.

Description : How to connect voltmeter and ammeter to circuit ?

Last Answer : : A voltmeter is connected in parallel with the two points of voltage circuit to measure the voltage difference. Again, to measure the flow rate of an electric circuit, ammeters are added to the electromagnetic circuit.

Description : What is an Ammeter ?

Last Answer : An ammeter is a device which can be used to directly measure the flow of electricity in an electric single ampere. It is a galvanometer whose resistance is very low. It has to be connected in series with the circuit. As a result, the entire current flows through the meter coil.

Description : What is the function of ammeter ?

Last Answer : Moving coil ammeter is used to measure one-way flow of electricity and moving iron ammeter is used to measure alternating current.

Description : In the circuit shown in Fig. 4.67, the resistance of the ammeter A is negligible and that of thevoltmeter V is very high. When the switch S is open, t

Last Answer : In the circuit shown in Fig. 4.67, the resistance of the ammeter A is negligible and that of ... internal resistance of the cell (iii) value of R.

Description : Find the ammeter reading in the cirucit shown in Fig. 4.65.

Last Answer : Find the ammeter reading in the cirucit shown in Fig. 4.65.

Description : The reading of the ammeter as per figure shown is

Last Answer : The reading of the ammeter as per figure shown is A. `(1)/(2)A` B. `(3)/(4)A` C. `(1)/(8)A` D. `2A`

Description : A voltmeter of range 2 V and resistance `300 Omega` cannot be converted into ammeter of range

Last Answer : A voltmeter of range 2 V and resistance `300 Omega` cannot be converted into ammeter of range A. `1 A` B. `1 mA` C. `100 mA` D. `10 mA`