What inspection checks should be made to a multimeter before use?

1 Answer

Answer :

If it has battery cells, ensure you have the good battery cells.The probes should be intact. The knobs should be in order. Thedevice should not have any cracks or broken parts.

Related questions

Description : The process where in the processor constantly checks the status flags is called as _________ A. Polling B. Inspection C. Reviewing D. None of the Above

Last Answer : A. Polling

Description : The process wherein the processor constantly checks the status flags is called as ___________ a) Polling b) Inspection c) Reviewing d) Echoing

Last Answer : Polling

Description : Before using an all-purpose electric measuring instrument (multimeter) utilizing internal batteries to supply power for resistance measurements, you should FIRST ____________. A. remove one of the ... batteries C. calibrate using a known external resistance D. select the proper resistance range

Last Answer : Answer: D

Description : Before servicing the device indicated as 'A' in panels #1 and #3 of the illustration, the device labeled 'CT' must __________. EL-0003 A. have the disconnected leads taped to prevent ... D. have one lead grounded to discharge static electricity for the prevention of damage to electronic components

Last Answer : Answer: C

Description : Evidence includes- a) All statements which the court permits or requires to be made before it by  witnesses, in relation to matters of face under inquiry. b) All documents including electronic record produced for the inspection of the court c) Both the A & B d) None of these

Last Answer : c) Both the A & B

Description : Mark the correct option a) All statements which the court permits or requires to be made before it by  witnesses, in relation to matters of fact under inquiry such statements are called  oral evidence b) ... documentary evidence c) Both the A and B are correct d) Neither A nor B are correct.

Last Answer : c) Both the A and B are correct

Description : A process designed to provide an objective evaluation, before the report is issued, of the significant judgments the engagement team made and the conclusions they reached in formulating the report. a. Peer review b. Inspection c. Engagement quality control review d. Monitoring

Last Answer : Engagement quality control review

Description : Who checks, before flight, that the aircraft’s weight is such that the flight can be safely made and that any transported cargo is properly distributed and secured? a. The company’s cargo technicians b. The captain c. The mechanic on board, or in his absence the co-pilot d. The operator

Last Answer : b. The captain

Description : How can I use a multimeter to find out how many OHMS are in a cable?

Last Answer : Measure the potential difference (V) across the cable and the current (I) running through it. Then use Ohm’s law: V = IR. R is the resistance, given in ohms, where 1 ohm is 1 volt divided by 1 amp.

Description : Which of the listed statements is correct when using an analog multimeter as an ohmmeter? A. The pointer should be adjusted to zero each time a new resistance range is selected. B. The ... C. Ohmmeters are not sufficiently sized to measure conductor insulation resistance. D. All of the above.

Last Answer : Answer: D

Description : When troubleshooting electronic equipment, you should use a high impedance multimeter ________________. A. to prevent excess current flow through the meter that would damage it B. for AC measurements only ... being tested D. so as not to load down the circuit and obtain erroneous voltage readings

Last Answer : Answer: D

Description : Why would you use a hook-on voltmeter instead of a multimeter?

Last Answer : To measure current safely and easily (with no need to disconnect the wiring of the circuit).

Description : How do you use a multimeter?

Last Answer : Ask E/O as you will have to see how to use it on ship.

Description : What is a multimeter ?

Last Answer : Also known as Multimeter or Multitester , Avometer ( AVO {Ampere-Volt-Ohm} meter) . It is an electronic measuring instrument , where various measurement functions are combined in one unit. A simple ... টাকার 600 , and laboratory-grade models with certified grading can cost up to ইউ 5,000.

Description : What should be the outputs of the hot neutral and ground wires respectively when tested with a multimeter?

Last Answer : Feel Free to Answer

Description : A multimeter is used to measure – (1) current (2) voltage (3) resistance (4) All of the above

Last Answer : (4) All of the above Explanation: A multimeter or a multitester, also known as a VOM (Volt-Ohm meter), is an electronic measuring instrument that combines several measurement functions in ... or digital circuits-analog multimeters (AMM) and digital multimeters (often abbreviated DMM or DVOM.)

Description : If your multimeter gives a reading in ohms when testing each end of each conductor of a three-conductor cable, this indicates ______________. A. continuity of the conductor B. an infinite resistance C. the presence of a partial ground D. that the conductor is not short circuited

Last Answer : Answer: A

Description : When reading AC current with the multimeter shown in the illustration and you are unsure of the range, the range switch should be set to ___________. EL-0047 A. 10 MA/ 10 AMP with leads in the (-10 A ... leads in the (-COMMON) and (+10 A) jacks D. unable to measure AC current with this multimeter

Last Answer : Answer: D

Description : What is the resistance value indicated on the multimeter scale illustrated, if the range switch is set at R X 100, and the needle is at the position indicated by the letter 'R'? EL-0047 A. 6.0 ohms B. 162.5 ohms C. 600 ohms D. 16,250 ohms

Last Answer : Answer: C

Description : What is the resistance value indicated by the multimeter scale illustrated, if the range switch is set at R X 100, and the needle is at the position indicated by the letter 'Y'? EL-0047 A. 220 ohms B. 240 ohms C. 2,400 ohms D. 24,000 ohms

Last Answer : Answer: C

Description : What is the resistance value indicated by the multimeter scale illustrated, if the range switch is set at R X 1, and the needle is at the position indicated by the letter 'A'? EL-0047 A. 10 ohms B. 100 ohms C. 200 ohms D. 1,000 ohms

Last Answer : Answer: C

Description : A multimeter can be used to directly measure _____________. A. watts B. field flux C. current D. all of the above

Last Answer : Answer: C

Description : D.C. propulsion motor brush pressure depends on the brush grade used and in practice is set with a ______________. A. multimeter B. manometer C. spring scale D. compound gauge

Last Answer : Answer: C

Description : A multimeter can be used to measure _____________. A. resistance B. voltage C. current D. all of the above

Last Answer : Answer: D

Description : When using a multimeter for resistance measurements, it should be calibrated by clipping the loose ends of the leads together and _____________. A. setting the instrument pointer at 'zero' ohms B. ... the plus and minus terminals D. using a special purpose resistance measuring instrument (a bridge)

Last Answer : Answer: A

Description : A multimeter may be damaged by taking a _____________. A. voltage reading while in the ammeter mode B. current reading while in the voltmeter mode C. resistance reading while in the ammeter mode D. resistance reading while in the voltmeter mode

Last Answer : Answer: A

Description : You are calibrating a multimeter using internal batteries to supply power for resistance measurements. However, you are unable to adjust the pointer to 'zero' using the adjustment knob. Therefore, you should ... change scales to the R X 100 scale and adjust using the 'zero ohms' adjusting knob

Last Answer : Answer: A

Description : What is the resistance value indicated by the multimeter scale illustrated, if the range switch is set at R X 1, and the needle is at the position indicated by the letter 'F'? EL-0047 A. 0.6 ohms B. 6 ohms C. 9.6 ohms D. .38 ohms

Last Answer : Answer: A

Description : What is the resistance value indicated by the multimeter scale illustrated, if the range switch is set at R X 1, and the needle is at the position indicated by the letter 'D'? EL-0047 A. 7.8 ohms B. 8 ohms C. 3.6 ohms D. .36 ohms

Last Answer : Answer: C

Description : What is the resistance value indicated by the multimeter scale illustrated, if the range switch is set at R X 1, and the needle is at the position indicated by the letter 'R'? EL-0047 A. 6 ohms B. 6.8 ohms C. 1.7 ohms D. 167 ohms

Last Answer : Answer: A

Description : What is the resistance value indicated by the multimeter scale illustrated, if the range switch is set at R X 1, and the needle is at the position indicated by the letter 'X'? EL-0047 A. 8 ohms B. 6.2 ohms C. 1.57 ohms D. 150 ohms

Last Answer : Answer: A

Description : What is the resistance value indicated by the multimeter scale illustrated, if the range switch is set at R X 1, and the needle is at the position indicated by the letter 'C'? EL-0047 A. 1.3 ohms B. 4.8 ohms C. 13 ohms D. 121 ohms

Last Answer : Answer: C

Description : What is the resistance value indicated by the multimeter scale illustrated, if the range switch is set at R X 1, and the needle is at the position indicated by the letter 'B'? EL-0047 A. 1.45 ohms B. 7.2 ohms C. 37 ohms D. 70 ohms

Last Answer : Answer: D

Description : What is the resistance value indicated by the multimeter scale illustrated, if the range switch is set at R X 1 and the needle is at the position indicated by the letter 'Y'? EL-0047 A. 2.2 ohms B. 24 ohms C. 240 ohms D. 2,400 ohms

Last Answer : Answer: B

Description : A device which can be used to check the calibration of a circuit breaker is a _________________. A. 500 volt megohmmeter B. portable low voltage high current testing unit C. standard digital multimeter D. clamp-on voltmeter

Last Answer : Answer: B

Description : Which of the listed instruments can be best used to locate a grounded field coil in a synchronous motor? A. Frequency meter B. Megohmmeter C. Voltmeter D. Multimeter

Last Answer : Answer: B

Description : Electronic equipment used to measure standing wave ration. A. Reflectometer B. Wavemeter C. Altimeter D. Multimeter

Last Answer : A. Reflectometer

Description : Which tester is used to measure SWR? A. Spectrum analyzer B. Multimeter C. Reflectometer D. Oscilloscope

Last Answer : C. Reflectometer

Description : Differentiate between the following pairs: (a) Telemeter and Multimeter: (b) Perimeter and Altimeter (c) Periscope and Microscope (d) Nucleon and Photon (e) Cusec and Comet

Last Answer : (a) Telemeter and Multimeter: Telemeter is used to convey the physical statistics to a distance, while a multimeter is a complex device, having a potentiometer and ammeter. (b) Perimeter and Altimeter Perimeter is ... packet. (e) Cusec and Comet Cusec is a measure of flow, while comet is an object.

Description : How To Test A Transistor With A Multimeter?

Last Answer : 1. Emitter +ve of meter and base -ve output =Low resistance 2. Emitter -ve of meter and base +ve output =High resistance 3. Collector +ve and base -ve output =Low 4. Collector -ve and base +ve output =Low Emitter: Collector = High resistance PNP: Opposite Results

Description : How Will You Test A Transistor With A Multimeter?

Last Answer : 1. Emitter +ve of meter and base -ve output =Low resistance 2. Emitter -ve of meter and base +ve output =High resistance 3. Collector +ve and base -ve output =Low 4. Collector -ve and base +ve output =Low Emitter: Collector = High resistance PNP: Opposite Results

Description : How will you test a transistor with a multimeter. ?

Last Answer : 1. Emitter +ve of meter and Base -ve output = Low resistance 2. Emitter -ve of meter and base +ve output = High resistance. 3. Collector +ve and Base -ve output = Low. 4. Collector -ve and base +ve output = High. Emitter : Collector = High Resistance. PNP : Opposite Results. 

Description : How is an overload condition indicated by the electronic digital multimeter?

Last Answer : Simultaneous flashing of display readouts

Description : Power for the electronic digital multimeter is normally supplied by what internal power source?

Last Answer : Rechargeable batteries.

Description : What type of circuit breaker is used on a multimeter?

Last Answer : A push button or push-pull circuit breaker (small size, low power).

Description : What meter reading is shown on each multimeter in each part of figure 1-50?

Last Answer : (A) 410 mA dc; (B) 3.9 mA ac; (C) -22 V dc; (D) 600 V ac; (E) 1.4 V ac; (F) 1.9 kohms

Description : How is the mirror on a multimeter used?

Last Answer : Make sure no image of the pointer is visible in the mirror when reading the meter.

Description : What is the reason for having a mirror on the scale of a multimeter?

Last Answer : To stop parallax error

Description : Why is the dc scale on a multimeter different than the ac scale?

Last Answer : The meter movement reacts to average ac voltage and current and the effective value is desired.

Description : How is a multimeter changed from a voltage measuring device to a resistance measuring device?

Last Answer : By changing the position of the function switch