# The r.m.s. value of pure cosine function is?

The r.m.s. value of pure cosine function is?

The r.m.s. value of pure cosine function is 0.707 of peak value.

0.707 of peak value

## Related questions

Description : The equation of 50 Hz current sine wave having r.m.s. value of 60 A is?

Description : The r.m.s. value of a sinusoidal A.C. current is equal to its value at an angle of______degrees.

Description : The r.m.s. value and mean value is the same in the case of?

Last Answer : The r.m.s. value and mean value is the same in the case of square wave.

Description : Define : i) Average value ii) RMS value of an AC Wave.

Last Answer : i) Average value: The average value is defined as the average of all instantaneous values during one alternation . That is, the ratio of the sum of all considered instantaneous values to the ... as produced by the alternating current when flowing through the same resistance for the same time.

Description : RMS value formula

Last Answer : RMS value formula

Description : Define RMS value.

Last Answer : RMS Value of Sinusoidal AC Waveform: The RMS value is the Root Mean Square value. It is defined as the square root of the mean value of the squares of the alternating quantity over one cycle ... power or heat as is produced by the alternating current during the same time under the same conditions.

Description : What is the meaning of RMS value?

Last Answer : RMS value means root mean square value. It is 0.707 times peak value of voltage or current. The ammeter and voltmeter records this rms value. RMS value for sine wave is more than average value. RMS ... same amount of heat as produce by AC when AC is flowing through the same resistance for same time.

Description : Express the following functions in cosine form

Last Answer : Express the following functions in cosine form

Description : The product of apparent power and cosine of the phase angle between circuit voltage and current is?

Last Answer : In parllpar reasonans RLC circuit the current is

Description : In a pure capacitive circuit if the supply frequency is reduced to 1/2, the current will?

Last Answer : In a pure capacitive circuit if the supply frequency is reduced to 1/2, the current will be reduced by half.

Description : In a pure inductive circuit if the supply frequency is reduced to 1/2, the current will?

Last Answer : In a pure inductive circuit if the supply frequency is reduced to 1/2, the current will be doubled.

Description : An A.C. voltage is impressed across a pure resistance of 3.5 ohms in parallel with a pure inductance of impedance of 3.5 ohms?

Last Answer : An A.C. voltage is impressed across a pure resistance of 3.5 ohms in parallel with a pure inductance of impedance of 3.5 ohms, both resistance and inductance carry equal currents.

Description : Pure inductive circuit takes power from the A.C. line when?

Last Answer : It takes power when voltage decreases and current increases.

Description : In a pure inductive circuit?

Last Answer : Voltage lagging in inductor

Description : In a pure resistive circuit?

Last Answer : In a pure resistive circuit current is in phase with the voltage.

Description : Pure inductive circuit?

Last Answer : Pure inductive circuit takes power from the line during some part of the cycle and then returns back to it during other part of the cycle.

Description : Pure substances

Last Answer : Any material that is not a mixture, is called a pure substance. Pure substances include elements and compounds. It is much more difficult to break down pure substances into their parts, and complex chemical methods are needed to do this.

Description : In a pure resistive circuit, the average power Pavg is ______ the peak power Pmax. (1) Double (2) One-half of (3) One-fourth (4) Equal to

Last Answer : In a pure resistive circuit, the average power Pavg is One-half of the peak power Pmax.

Description : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Last Answer : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Description : In which of the following waveforms is RMS voltage equal to the average voltage? A) Triangle wave B) Square wave C) Sine wave D) None of these

Last Answer : In which of the following waveforms is RMS voltage equal to the average voltage? A) Triangle wave B) Square wave C) Sine wave D) None of these

Description : Define : i) Maximum Value ii) RMS Value of ac supply

Last Answer : i) Maximum Value :- The maximum or peak value attained by an alternating quantity during positive or negative half cycle, is called maximum value or peak value.  ii) RMS Value of ac ... as produced by the alternating current when flowing through the same resistance and for the same time.

Description : Instantaneous value of a sine wave voltage

Last Answer : Instantaneous value of a sine wave voltage

Description : Average value

Description : Define average value.

Last Answer : Average Value of Sinusoidal AC Waveform: The average value is defined as the arithmetical average or mean value of all the values of an alternating quantity over one cycle.  And/OR  For ... charge as is transferred by the alternating current during the same time under the same conditions.

Description : Which of the following connection of transformers will give highest value of secondary voltage ? (A) Delta primary delta secondary (B) Delta primary star secondary (C) Star primary star secondary (D) Star primary delta secondary

Last Answer : Which of the following connection of transformers will give highest value of secondary voltage ? (A) Delta primary delta secondary (B) Delta primary star secondary (C) Star primary star secondary (D) Star primary delta secondary

Description : For a round wire, the approximate value of fusing current is given by

Last Answer : For a round wire, the approximate value of fusing current is given by  K√d3

Description : In an AC. circuit, a low value of kVAR compared with kW indicates?

Last Answer : In an AC. circuit, a low value of kVAR compared with kW indicates high power factor.

Description : In the case of an unsymmetrical alternating current the average value must always be taken over?

Last Answer : In the case of an unsymmetrical alternating current the average value must always be taken over the whole cycle.

Description : What is the value of Beta in power BJT?

Last Answer : The beta value in power BJT is 5 to 10.

Description : Describe the function of MUSE system for HDTV.

Last Answer : Bandwidth can be reduced by MUSE (Multiple Sub -Nyquist Sampling Encoding) system MUSE stands for Multiple Sub-Nyquist sampling encoding and is an HDTV bandwidth compression schemedeveloped by ... digital Audio system is called DANCE (Digital Audio Near-Instantaneous Compression and expansion).

Description : applications of : (1) Function generator   (2) Video pattern generator (3) AF signal generator and (4) Pulse generator.

Last Answer : 1) Function generator: i) As trouble shooting tool to different analog and digital circuits. ii) As a source of alignment of different receiver. iii) If rise time of square wave is ... trigger output, pulses are available. iii) The generator can be operated as free running generator.

Description : Draw neat block diagram of FM receiver and explain function of each block

Last Answer : Explanation:-  RF amplifier: There are two important functions of RF amplifier: 1) To increase the strength of weak RF signal. 2) To reject image frequency signal. In FM ... FM broadcast, the maximum modulating frequency is 15 kHz. Hence the audio amplifier must have large bandwidth.

Description : Draw and explain the function of cooling tower in TPS.

Last Answer : Cooling tower in TPS: The function of cooling tower is to reduce the temperature of water coming from condenser. Water is circulated from the basin of the cooling ... cooling Tower temperature of water is reduced either by natural or forced or induced draught method or combine

Description : State the function of super heater of a thermal power plant.

Last Answer : Function of Super heater: -  Its function is to increase the temperature of steam by absorbing heat from exhausted hot flue gases.

Description : What is the function of an electrical filter ?

Last Answer : Filter separates different components that are mixed together. Electrical filter can separate different frequency components. Electrical filters are the electrical circuits which are use to remove unwanted frequency components from the signal.

Description : State the function of cooling tower and condenser in thermal power station.

Last Answer : 1. Condenser:   Function of condenser is to convert exhaust steam again into water by reducing its temperature with the help of cold water. Also it reduces back pressure of steam turbine 2 ... tower : The function of cooling tower is to reduce the temperature of water coming from condenser.

Description : State the function of superheater and economizer.

Last Answer : Function of Superheater : The steam produced in the boiler is not dry but contains some moisture. Such wet steam can damage/corrode and reduce the efficiency of the plant. Hence before supplying ... the temperature of feed water to the boiler, so that efficiency of overall system is increased.

Description : State the location and function of i) Economizer ii) Feed water heater.

Last Answer : (i) Economizer:-  Location: - It is placed in the path of flue gases in between the exit from the furnace and the chimney. OR In The way of feed water before boiler. Function: - ... economizer. Function: - Its function is to increase the temperature of feed water by using blade steam.

Description : Write function of control rods in nuclear power plant.

Last Answer : Function of control rods in nuclear power plant: The function of control rod is to control the chain reaction in reactor core by adjusting its height.

Description : What is penstock? What is its function?

Last Answer : What is Penstock:- The penstock is the long pipe line. It consists of heavy duty steel pipe.  Function of Penstock:- Function of penstock is to carry water from the water intake (reservoir) to turbine.

Description : List any four applications of function generator.

Last Answer : Applications of function generator: 1. To test the bandwidth of audio frequency amplifier. 2. Used for troubleshooting of different analog and digital circuits. 3. Acts as source for alignment of receivers 4. For generation of different waves.

Description : State the function of former and control spring in PMMC instrument.

Last Answer : Function of Former: To support the coil and provide eddy current damping.  Function of Control Spring: To provide control torque or force and in some instruments springs can be used as current leads.

Description : Draw a labeled block diagram of sine wave generator and state function of each block.

Last Answer : Function Generator:  This instrument can deliver sine, triangular & square waves with frequency range of 0.01 Hz to 100 kHz.  The frequency control network is governed by a frequency ... voltage reaches a predetermined level on the negative slope of the integrator's output voltage.

Description : Name the different torque and their function in measuring instrument.

Last Answer : List of torques in analog instruments:  1. Deflecting torque  2. Controlling / restraining torque.  3. Damping torque.  1. Deflecting torque:  - To create deflection of pointer ... .  - Bring the pointer to standstill quickly.  - To minimize oscillations about final position.

Description : State the function of controlling torque in electrical measuring instrument.

Last Answer : Function of controlling torque  1. The function is to opposes the deflection force and increases with the increase in the deflection of the moving system, to limit its movement. 2. and brought ... set a position where the two opposing forces i.e. deflection and controlling forces are equal.

Description : State the function of controlling torque. Write two types of it.

Last Answer : Function of Controlling Torque:  To restrict the motion of pointer / spindle and stop the pointer at the relevant position to get correct reading.  To bring back pointer to zero ... measurement is removed.  Types of Controlling Torque: 1. Spring control method 2.Gravity control method

Description : Draw block diagram of function generator. Write applications of function generator.

Last Answer : Applications of Function Generator: 1. To test the bandwidth of audio frequency amplifier 2. It can produce sine wave, triangle wave, saw tooth wave, even arbitrary waveform. 3. ... for troubleshooting of different analog and digital circuits 7. Acts as source for alignment of receivers.

Description : Draw block diagram of microprocessor and state the function of each block.

Last Answer : Registers: The 8085 includes six registers, one accumulator, and one flag register, as shown in Figure. In addition, it has two 16-bit registers: the stack pointer and the program counter. The 8085 ... , Subtraction, Increment, Decrement etc.  Logic Operations: AND, OR, X-OR, Complement etc.

Description : The necessary and sufficient condition for a rational function of, T(s) to be driving point impedance of an RC network is that all poles and zeros should be

Last Answer : The necessary and sufficient condition for a rational function of, T(s) to be driving point impedance of an RC network is that all poles and zeros should be simple and and lie on the negative axis in the s -plane