Silicon steel is used in electrical machines because it has?

Silicon steel is used in electrical machines because it has?
by

1 Answer

Answer :

Silicon steel is used in electrical machines because it has low hysteresis loss.

by

Related questions

Which of the following elements are used as dopants in silicon or germanium semiconductors?

Description : Which of the following elements are used as dopants in silicon or germanium semiconductors? A) Antimony B) Phosphorus C) Arsenic D) All the above

Last Answer : Which of the following elements are used as dopants in silicon or germanium semiconductors? A) Antimony B) Phosphorus C) Arsenic D) All the above

In D.C. machines fractional pitch winding is used?

Last Answer : In D.C. machines fractional pitch winding is used to reduce the sparking.

The speed control of universal motor used for sewing machines is by?

Last Answer : The speed control of universal motor used for sewing machines is by varying the resistance.

Laminated cores, in electrical machines, are used to reduce?

Description : Laminated cores, in electrical machines, are used to reduce?

Last Answer : Laminated cores, in electrical machines, are used to reduce eddy current loss.

is efficiency of transformer is greater than electrical machine and why?

Last Answer : The efficiency of transformer is Greater than electrical Machine because there is no rotational losses in transformer and there is no air gap losses in transformer so losses is less in transformer compare to electrical machine so efficiency is higher in case of transformer.

Which is a semiconductor: copper, silicon, or neon?

Description : Which is a semiconductor: copper, silicon, or neon?

Last Answer : Copper is a metal. Silicon is a semiconductor. Neon is inert gas.

A thin P-type silicon sample is uniformly illuminated with light which generates excess carriers.

Description : A thin P-type silicon sample is uniformly illuminated with light which generates excess carriers. The recombination rate is directly proportional to (A) the minority carrier mobility (B ... lifetime (C) the majority carrier concentration (D) the excess minority carrier concentration

Last Answer : A thin P-type silicon sample is uniformly illuminated with light which generates excess carriers. The recombination rate is directly proportional to the excess minority carrier concentration

Hard steel is suitable for making permanent magnets because?

Description : Hard steel is suitable for making permanent magnets because?

Last Answer : Hard steel is suitable for making permanent magnets because it has good residual magnetism.

Which of the following is the advantage of using CRGO steel in transformers?

Description : Which of the following is the advantage of using CRGO steel in transformers? A) High magnetic flux density B) Low permeability C) Both A and B D) None of these

Last Answer : It definitely High Magnetic Flux Density since a crgo steel has always a more around 3% of silicon proportion among the remaining ferrite which make cold rolled grain oriented steel having high flux magnetic ... for more about the crgo core you can learn here https://nicoreindia.com/crgo-core/

What are the advantages of the use of frequency converter instead of star-delta or soft starter?

Description : Can you guys explain the advantages of frequency converter against the star delta or soft starter?

Last Answer : ¬Soft starters  A soft starter is, as you would expect, a device which ensures a soft starting of a motor. A softstarter has different characteristics to the other starting ... at rated current from zero to full speed. Frequency converters are becoming cheaper all the time.

Steel Shovels

Description : Steel Shovels

Last Answer : Steel shovels are the best. They have all the good qualities of a shovel with a wooden handle bar, and more. Steel shovels, for one thing, will last you a long, long time. Steel shovels might be ... . Try to consider these things before you make a choice. Will it be tough steel, or lighter wood?

How to Install a Steel Door and Frame

Description : How to Install a Steel Door and Frame

Last Answer : How to Install a Steel Door and Frame Installing a steel door and frame for safety is a good project to consider. The door and frame often come as a set, making the process easier. After the ... board width. Nail new wallboard in place so that it stays against the door frame. Tape and plaster.

How to Polish Stainless Steel

Description : How to Polish Stainless Steel

Last Answer : How to Polish Stainless Steel Contrary to what its name suggests, the gleam of stainless steel items can be marred by grime, dirt, and mildew, making them look shabby. Normal washing, at ... life to your old stainless steel fixtures by applying any of the household solutions or commercial cleansers.

The function of steel wire in ACSR conductors is

Description : The function of steel wire in ACSR conductors is (A) To take care of surges. (B) To reduce corona. (C) To reduce inductance. (D) To provide additional mechanical strength

Last Answer : The function of steel wire in ACSR conductors is To provide additional mechanical strength

What is the permissible flux density in case of cold rolled grained oriented steel?

Description : What is the permissible flux density in case of cold rolled grained oriented steel?

Last Answer : The permissible flux density in case of cold rolled grained oriented steel is 1.7 Wb/m2.

In dc machines, the armature windings are placed on the rotor because of the necessity for

Description : In dc machines, the armature windings are placed on the rotor because of the necessity for  (1) electromechanical energy conversion (2) generation of voltage (3) commutation (4) development of torque

Last Answer : 3  Commutation

What type of motor is used for drilling machines?

Description : What type of motor is used for drilling machines?

Last Answer : universal motor also used in Handheld power tools, blowers, blenders, vacuum cleaners, polishers and kitchen appliances.universal motor is defined as a motor which may be operated either on direct or single phase AC supply at approximately the same speed and output

Are we losing control over our life to machines?

Description : Are we losing control over our life to machines?

Last Answer : That is up to you. You can or you can decide to not.

Heat Transfer Machines

Description : Heat Transfer Machines

Last Answer : Heat transfer machines are just the thing you need in order to do heat transfers on your clothing or whatever surface you want to decorate. In order for you to stick designs and precious stones on porous and ... is best. This will also give you an idea of what kind of designs you can choose from.

The inertia constants of two groups of machines which do not swing together are M1 and M2. The equivalent

Description : The inertia constants of two groups of machines which do not swing together are M1 and M2. The equivalent inertia constant of the system is

Last Answer : The inertia constants of two groups of machines which do not swing together are M1 and M2. The equivalent inertia constant of the system is M1M2/M1+M2

For protection of rotating machines against lightning surges _______ is used.

Description : For protection of rotating machines against lightning surges _______ is used.  (1) lightning arrester (2) capacitor (3) combination of lightning arrester and capacitor (4) lightning conductor and arrester

Last Answer : For protection of rotating machines against lightning surges combination of lightning arrester and capacitor is used. 

Satisfactory commutation of D.C. machines requires?

Last Answer : Satisfactory commutation of D.C. machines requires brushes should be of proper grade and size, brushes should smoothly run in the holders, smooth, concentric commutator properly undercut.

For a D.C. machines laboratory following type of D.C. supply will be suitable?

Last Answer : For a D.C. machines laboratory following type of D.C. supply will be suitable induction motor D.C. generator set.

Brushes of D.C. machines are made of?

Last Answer : Brushes of D.C. machines are made of carbon.

Hopkinson's test on D.C. machines is conducted at?

Last Answer : Hopkinson's test on D.C. machines is conducted at full-load.

The purpose of retardation test on D.C. shunt machines is to find out?

Last Answer : The purpose of retardation test on D.C. shunt machines is to find out stray losses.

In D.C. machines the residual magnetism is of the order of?

Last Answer : In D.C. machines the residual magnetism is of the order of 2 to 3 percent.

Exciters of synchronous machines are?

Last Answer : Exciters of synchronous machines are d.c. shunt machines.

Losses which occur in rotating electric machines and do not occur in transformers are?

Description : Losses which occur in rotating electric machines and do not occur in transformers are?

Last Answer : Friction losses windage losses 

Can anyone in the office machine business explain how click charges work?

Description : Can anyone in the office machine business explain how click charges work?

Last Answer : can you give more specifics? Typically the contract would include a certain amt. of impressions (clicks) then any after that would be at a lesser rate.

State any two applications of single phase autotransformer.

Description : State any two applications of single phase autotransformer.

Last Answer : Applications of single phase auto transformers: 1) Give small boost to distribution cable to correct the voltage drop. 2) As auto transformer starter for induction motors. 3) As furnace supply ... . 5) In control equipment for single phase locomotives. 6) As dimmer in lighting circuits.

State any two conditions for parallel operation of 3-phase transformer.

Description : State any two conditions for parallel operation of 3-phase transformer.

Last Answer : Conditions for Parallel operation of 3 phase transformer 1) Voltage ratings of both the transformers must be identical. 2) Percentage or p.u. impedance should be equal in magnitude. 3) X/R ratio ... between primary & secondary voltages must be same. 6) Phase sequence on both sides must be same.

Compare core type transformer and shell type transformer on the following parameters. (i) Types of winding used, (ii) Application

Description : Compare core type transformer and shell type transformer on the following parameters. (i) Types of winding used, (ii) Application

Last Answer : Ans:

Define transformation ratio in terms of current and voltage.

Description : Define transformation ratio in terms of current and voltage.

Last Answer : (i) Transformation Ratio (K) is defined as the ratio of the primary current to the secondary current.  (ii) Transformation Ratio (K) is defined as the ratio of the secondary voltage to the primary voltage.

Define: (i) Commercial efficiency of a transformer and (ii) All day efficiency of a transformer.

Description : Define: (i) Commercial efficiency of a transformer and  (ii) All day efficiency of a transformer.

Last Answer : (i) Commercial Efficiency : It is the ratio of output power in watt to the input power in watt. (ii) All day efficiency of a transformer: It is the ratio of output energy in kWh to the input energy in kWh in the 24 hours of the day

A 50 KVA transformer has iron loss 2 kW on full load. Calculate its iron loss at 75% of full load.

Description : A 50 KVA transformer has iron loss 2 kW on full load. Calculate its iron loss at 75% of full load.

Last Answer : Iron loss is dependent on voltage and independent of load. Hence iron loss at 75% of Load = Iron loss at full load = 2 kW

State any four properties of Ideal transformer.

Description : State any four properties of Ideal transformer.

Last Answer : Properties of Ideal transformer: 1) No losses (iron and copper losses), hence no temperature rise. 2) No magnetic leakage i.e (Coefficient of coupling between primary and secondary windings is unity) 3) Zero winding ... drop i.e. E1 = V1, E2 = V2 5) Efficiency 100 %. 6) Regulation 0 %.

Draw the connection diagram of long shunt differential D.C. compound generator.

Description : Draw the connection diagram of long shunt differential D.C. compound generator.

Last Answer : Ans:

List any four advantages and two disadvantages of 3 phase induction motor.

Description : List any four advantages and two disadvantages of 3 phase induction motor.

Last Answer : Advantages of 3 phase induction motor: 1) Simple in construction. 2) Economical in cost. 3) Requires very less maintenance. 4) High efficiency. 5) Low maintenace cost. 6) Self starting. 7 ... operated below its full load capacity. 6) It takes a large current from line at instant of starting.

Explain how in a 3 phase induction motor to a rotating magnetic field is developed.

Description : Explain how in a 3 phase induction motor to a rotating magnetic field is developed. 

Last Answer : Production of Rotating Magnetic Field in Three-phase Induction Motor: In three-phase induction motor, the three-phase stator windings are displaced in space by 120° and their three-phase currents are displaced ... time by 120°. Such fluxes give rise to the resultant rotating magnetic field.

Which of the following alloy steels has the energy saving properties making it suitable for use in electrical machines? (A) Silicon steel (B) Chromium steel (C) Molybdenum steel (D) None of these

Description : Which of the following alloy steels has the energy saving properties making it suitable for use in electrical machines? (A) Silicon steel (B) Chromium steel (C) Molybdenum steel (D) None of these

Last Answer : (A) Silicon steel

A differentiator is not usually used in control system, because it : -

Description : A differentiator is not usually used in control system, because it : - (A) reduces damping  (B) increases error  (C) reduces gain margin  (D) increases input noise

Last Answer : A differentiator is not usually used in control system, because it : - increases input noise

Eddy current damping cannot be used for moving iron instrument because

Description : Eddy current damping cannot be used for moving iron instrument because

Last Answer : Eddy current damping cannot be used for moving iron instrument because the presence of a permanent magnet required for such purpose would affect the deflection and hence the reading of the instrument

Starters are used with D.C. motors because?

Last Answer : Starters are used with D.C. motors because to restrict armature current as there is no back e.m.f. while starting.

The repulsion start induction run motor is used because of?

Last Answer : The repulsion-start induction-run motor is used because of high starting torque.

State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them.

Description : State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them. 

Last Answer : The insulating materials used in motor are as belows: 1. Cotton, 2. Silk, or paper, 3. Press board, 4. Resins 5. PVC 6. Cellulose-Fiber, 7. Enameled coating, etc  ... Over 180° Mica, porcelain, ceramics, glass quartz, asbestos, treated glass fiber or treated asbestos. etc.

Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Description : Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Last Answer : Parts Insulating Materials  Insulation between heating element and base plate of electric iron. Mica Insulation used over copper or aluminium conductor used for making coils.  ... Transformer bushings Porcelain  Insulation between transmission line and pole. Porcelain

State the material used for making (1) Magnetic Core (2) Fuse element

Description : State the material used for making (1) Magnetic Core (2) Fuse element  

Last Answer : The material used for making of:  (1) Magnetic Core : Iron, cobalt, Nickel, CRGO, HRGO , silicon steel  (2) Fuse Element: Tin- lead wire, Tinned copper wire 

State different types of holders used in wiring installation.

Description : State different types of holders used in wiring installation.

Last Answer : Following types of holders used in wiring installation: 1. Pendent Holder 2. Batten Holder 3. Angle holder 4. Screwed holder 

State properties of conductor material used for overhead conductor.

Description : State properties of conductor material used for overhead conductor. 

Last Answer : Following are the properties of conductor material:-   1. High conductivity :- Material should have high conductivity 2. High mechanical strength:- Material should have sufficiently high mechanical strength ... available & less costly. 9. Scrap Value: - Material should have high scrap value.